This Combined Synopsis/Solicitation opportunity from National Aeronautics And Space Administration was posted on September 1, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Agilent Cary 5000 UV-Vis-NIR Bundle, DRA, Measurement Accessory & Solids Autosampler

Closed

80NSSC26941369QFederal

Submission Closed09/08/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334516

New

SLED

Hyperspectral Cameras with Benchtop Reflectance System

Solicitation # AG-RSCH-ITB-6625

Solicitation AG-RSCH-ITB-6625 is an Invitation to Bid issued by the Texas A&M AgriLife Procurement Office for the acquisition of Hyperspectral Cameras with Benchtop Reflectance System. The procurement is managed by the state of Texas, with the place of performance located within Texas. Kaitlyn Vetzel serves as the primary point of contact and buyer for this requirement. Interested vendors must register and submit their bids electronically through the AggieBid portal under the Business Opportunities section. The deadline for bid submission is November 6, 2026, at 2:00 p.m. central time. While the solicitation notice provides the general scope of work, all detailed technical specifications and documentation are hosted exclusively on the AggieBid site.

Texas A&M AgriLife Research

POSTED

DEADLINE

Visible and Near Infrared (VNIR) Hyperspectral Camera & Benchtop System SupplierThis subcontract through Texas A&M University involves the procurement of Visible and Near Infrared (VNIR) hyperspectral cameras and a benchtop reflecting system to support prime contractors on Texas A&M AgriLife Research projects. The scope of work includes the delivery of two hyperspectral cameras and a reflecting system equipped with SWIR components, ensuring all hardware is provided with comprehensive warranty coverage. The supplier is required to provide essential technical documentation, including detailed specifications, Accessibility Conformance Reports, and ECCN/Export Control documentation. This procurement falls under NAICS code 334516, with a response deadline set for November 6, 2026.

POSTED

DEADLINE

Hyperspectral Cameras with Benchtop Reflectance System

Solicitation # AG-RSCH-ITB-6625

Texas A&M AgriLife Research has issued solicitation AG-RSCH-ITB-6625 for the procurement of two hyperspectral cameras, including a Visible and Near Infrared (VNIR) model, and a benchtop reflecting system. This Invitation to Bid is open from October 23, 2026, with a response deadline of November 6, 2026, at 2:00 PM CST. The contract will be awarded based on best value criteria, evaluating factors such as purchase price, vendor reputation, quality of goods, delivery time, warranty coverage, and the vendor's past relationship with the agency. Bidders must provide unit price responses, full technical specifications, and detailed information regarding virtual training and estimated delivery timelines. Compliance with Texas Government Code section 669.003 and the agency's standard terms and conditions is required. Payment is set at Net 30 days following the later of a correct invoice receipt or the successful completion of training and agency acceptance. The procurement is governed by the laws of the State of Texas, and the primary point of contact for this action is Kaitlyn Vetzel.

POSTED

DEADLINE

Solicitation # 3425009999

The Dormitory Authority of the State of New York (DASNY) is soliciting bids for the procurement and delivery of Class I Biological Safety Cabinets for the New York State Department of Health’s New Life Sciences Public Health Laboratory. The project follows a phased delivery approach, beginning with one initial mock-up unit to be fabricated and delivered to the Griffin Laboratory in Slingerlands, NY, by mid-February 2027. Upon approval of the mock-up, which may take up to six months, DASNY anticipates ordering an additional five units. Bidders must provide a grand total lump sum price and adhere to strict technical standards, including ASHRAE 110 and NFPA 45, and must perform HEPA filter leak tests and factory testing for all units. Interested vendors must submit a signed Intent to Bid form by November 17, 2026, along with proof of at least three years of industry experience, product data, and shop drawings to qualify. Final bids are due via Bid Express by December 15, 2026, with an anticipated award date of December 22, 2026. The contract requires compliance with New York State Labor Law prevailing wage rates, M/WBE participation goals, and the submission of a Vendor Responsibility Questionnaire. Additionally, contractors awarded contracts over 100,000 dollars must certify their New York State sales and use tax registration using Form ST-220-TD. Award will be based on the lowest bid for each item.

Dormitory Authority of the State of New York

POSTED

DEADLINE

High Performance Liquid Chromatography (HPLC) Systems SupplierThis subcontract agreement involves the supply of High Performance Liquid Chromatography (HPLC) systems for prime contractors working on Southern Regional College projects. The scope of work requires the delivery of three fully configured systems to the Portadown and Newry campuses, consisting of two standard HPLC systems and one specialized system equipped with a Nitrogen Generator and Mass Detector. The supplier is responsible for providing all necessary technical brochures and supporting documentation in accordance with the Specification Schedule. This procurement opportunity was posted on October 23, 2026, with a response deadline set for November 18, 2026.

Southern Regional College

POSTED

DEADLINE

ID 6637252 - DfE - SRC - High Performance Liquid Chromatography (HPLC)

Solicitation # ID 6637252

Southern Regional College is seeking a supplier for the supply, delivery, and commissioning of High Performance Liquid Chromatography (HPLC) equipment. The primary requirement includes two standard HPLC units for the Portadown and Newry campuses and one HPLC unit equipped with a Mass Detector and Nitrogen Generator Package for the Newry campus. The selected supplier must also manage the removal of legacy equipment, providing either trade-in value or ensuring safe and sustainable disposal. There is an option for the college to purchase one additional standard HPLC for the Armagh campus within 12 months of the initial commissioning, provided the supplier maintains the original tender pricing for that period. The contract is estimated at 242,000 GBP including VAT, with an initial performance period from February 26, 2027, to February 25, 2029, and the possibility of two 2-month extensions. This procurement is noted as particularly suitable for small and medium-sized enterprises. Award decisions will be based on a weighted scoring system consisting of 90% price and 10% quality, following a pass/fail evaluation of specification compliance and technical documentation. The submission deadline for this open procedure is November 18, 2026.

Southern Regional College

POSTED

DEADLINE

403B-27 Dynamic Shear Rheometer (DSR)

Solicitation # 403B-27

The Ohio Department of Transportation (ODOT) is seeking a one-time purchase of one new automatic Dynamic Shear Rheometer (DSR) for asphalt binder testing, specifically suggesting the Anton Paar SmartPave/MCR 73 model. The equipment must be air-cooled and comply with AASHTO T 315 and T 350 standards. The procurement includes the DSR unit, required software and licenses, three 25 mm lower testing plates, and two 8 mm lower testing plates. The winning vendor is responsible for shipping to Columbus, Ohio, as well as providing installation, training, and onsite calibration, including the necessary standard fluids. Additionally, the vendor must provide a separate trade-in credit for an existing Anton Paar SmartPave 101 DSR, serial number 80313953. To be considered responsive, bidders must submit their responses electronically via OhioBuys by the November 10, 2026, deadline. Requirements include providing documentation as an authorized dealer or distributor, specifying minimum computer requirements, and ensuring all unit prices are entered accurately without the use of ditto marks or arrows. The contract is awarded on an F.O.B. Destination basis, meaning the vendor bears the risk and cost of transportation. Payment is processed via electronic funds transfer or state payment methods, with terms set at 30 calendar days following the receipt of a proper invoice. Bidders must also certify compliance with the Buy American Act and provide registration with the Ohio Secretary of State or proof of exemption within seven business days of the award.

Dept Of Transportation

POSTED

DEADLINE

Supply and Delivery of a Silica Analyzer - Holyrood, NL

Solicitation # 110291 MG

Newfoundland Labrador Hydro is seeking bids for the supply and delivery of a silica analyzer to be located in Holyrood, NL. This solicitation, identified by number 110291 MG, was posted on October 23, 2026, with a response deadline set for November 6, 2026. To be eligible for the contract, the successful contractor must maintain Commercial General Liability Insurance with a minimum coverage amount of five million dollars per accident or occurrence and must be able to provide valid proof of this insurance.

Newfoundland Labrador Hydro

POSTED

DEADLINE

Supply of CMOS Camera and LED Control ElectronicsThis subcontract opportunity is for the supply of digital imaging cameras and electronic drivers to support prime contractors on projects for the Naval Research Laboratory within the Department of Defense. The required deliverables include Zelux 1.6 MP Monochrome CMOS Cameras featuring 1/4-20 taps and external triggers, along with corresponding LED drivers and all necessary cabling. To be eligible for award, the provider must be an original equipment manufacturer or an authorized reseller. The contract is designated as a total Small Business Set Aside under NAICS code 334516, with performance taking place in Washington. Interested parties must submit their responses by October 30, 2026.

Naval Research Laboratory

POSTED

DEADLINE

Supply of Specialized Optical ElementsThis subcontract opportunity is for the supply of specialized precision optical components to support prime contractors on projects for the Naval Research Laboratory under the Department of Defense. The required deliverables include Glan-Taylor Polarizers with a 5 mm clear aperture and 650 to 1050 nm coating, quarter and half wave plates, dielectric-coated concave mirrors, and aspheric condenser lenses featuring a 25 mm diameter, 20.1 mm focal length, 0.60 numerical aperture, and an anti-reflective coating for 350 to 700 nm. Eligible bidders must be an original equipment manufacturer or an authorized reseller. This is a total small business set-aside opportunity under NAICS code 334516, with performance taking place in Washington. The solicitation was posted on October 23, 2026, and requires a response by October 30, 2026.

Naval Research Laboratory

POSTED

DEADLINE

Supply of Single Photon Detection ModulesThis subcontract, issued by the Department of Defense for the Naval Research Laboratory, involves the supply of four high-precision Single Photon Detection Modules. These modules must feature a wavelength range of 350 to 1100 nm and a 500 µm active area. To ensure the validity of warranty and service agreements, the provider must be an original equipment manufacturer or an authorized reseller. The opportunity is designated as a total Small Business Set Aside under NAICS code 334516, with performance taking place in Washington. Interested parties must have submitted their responses by the deadline of October 30, 2026.

Naval Research Laboratory

POSTED

DEADLINE

FS5 Analyzer System SupplyThis subcontract, issued by the Department of Defense under the W6QM Micc-Ft Drum agency, requires the supply of a complete fiber analysis system for prime contractors working on US Army DEVCOM projects. The primary requirement is the delivery of a Valmet FS5 Analyzer or an equivalent system that meets all specified physical and functional characteristics. The delivery must include the main analyzer unit, back-up image media, sample beakers, a measurement accuracy verification kit, a manual defibrator, and a water treatment unit equipped with a filter, regulator, and deaeration system. The selected provider is responsible for delivering the FS5 Analyzer system fully assembled and thoroughly documented. This procurement falls under NAICS code 334516 and is associated with a performance location in zip code 07806. Interested parties must adhere to the response deadline of October 30, 2026.

W6QM Micc-Ft Drum

POSTED

1 day ago

DEADLINE

in 5 days

AI Contract Overview

Solicitation 80NSSC26941369Q is a firm-fixed-price procurement issued by the NASA Shared Services Center on behalf of the NASA Glenn Research Center. This small business set-aside requires the purchase of a brand-name Agilent Cary 5000 UV-Vis-NIR Bundle and associated accessories, including a Universal Measurement Accessory, Diffuse Reflectance Accessory External, and Solids Autosampler. The equipment is a direct replacement for a failed spectrophotometer critical to material characterization for the USDV project. The place of performance is the NASA Glenn Research Center in Cleveland, Ohio, with a required delivery lead time of 38 weeks ARO and shipping terms set as FOB Destination. Award will be based on the lowest price technically acceptable (LPTA) offer. To be deemed technically acceptable, vendors must be authorized resellers and provide a Letter of Authorization and proof of pricing from the manufacturer. Quotes must include the vendor's Cage Code, UEI number, and lead time, and must be submitted to Laura Quave by September 8, 2026, at 4:00 p.m. CT. The contract incorporates various FAR clauses, including requirements for personal identity verification and strict adherence to U.S. export control laws such as ITAR and EAR. Payment terms are Net 30, and credit card payments will not be accepted.

General Info

NASA small business set-aside for Agilent Cary 5000 bundle; deadline September 8, 2026.

Agency

National Aeronautics And Space Administration → NASA Shared Services Center

Contract Value

$171,243.65

NAICS

334516 - Analytical Laboratory Instrument Manufacturing

Place of Performance

MS, USA

Set-Aside

SBA

Awardee

GOVERNMENT SCIENTIFIC SOURCE INC

Award Issued Date

09/23/2026, 12:00:00 AM UTC

Documents

NASA GRC Brand Name Justification for Agilent Cary 5000 UV-Vis-NIR Bundle

justification-and-authorization

High

RFQ 80NSSC26941369Q - Agilent Cary 5000 UV-Vis-NIR Bundle

rfq

High

SATPC0042395 Tab 04 4 SOW

sow

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedSep 1

Combined Synopsis

Response DeadlineSep 8

Deadline has passed

Submission Closed

09/08/2026, 09:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyNational Aeronautics And Space Administration → NASA Shared Services Center

Contacts2 people available

OfficeSTENNIS SPACE CENTER, MS, 39529, USA

Organization / AgencyNational Aeronautics And Space Administration → NASA Shared Services Center

Office AddressSTENNIS SPACE CENTER, MS, 39529, USA

Contacts

laura quave

contact@example.gov

+1 (555) 000-0000

Karen Artis

contact@example.gov

Full Description

This is a Brand Name requirement For Agilent Cary 5000 UV-Vis-NIR Bundle, DRA, Measurement Accessory & Solids Autosampler.

This procurement is set aside for small business.

VENDORS MUST REFERENCE THE NOTICE ID WHEN SUBMITTING A QUOTE IN THE SUBJUECT LINE.

NOTE: ALL VENDORS MUST PROVIDE PROOF OF PRICING FROM THE MANUFACTURER, AND CONFIRM AUTHORIZATION TO RESELL THE ITEMS LISTED IN THE STATEMENT OF WORK.

Vendor submitting quote must be an authorized reseller and Letter of Authorization must be submitted with the quote. If not, the quote will not be reviewed and deemed unacceptable.

Please include the following in your Quote:

Net 30
FOB Destination

Please provide your Cage Code & UEI # on your Quote.
Please provide ARO delivery time/Lead Time on your Quote.
If shipping is applicable, please provide on your Quote.

Please apply any discounts to your Quote.
We will not be paying with a Credit Card.