Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

AH-64 Swashplate Teflon Liner Replacement

Active

Federal

Response Deadline11/03/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the removal and replacement of Teflon liner bearings for AH-64 Non-Rotating Control Swashplates, specifically part number 7-311527061. Working for prime contractors under the Army Contracting Command Redstone Arsenal at the Corpus Christi Army Depot, the provider will install KAHR-LON X-1200S self-lubricating liner systems. All work must be performed in strict accordance with OEM Drawing 7-311527061 and DMWR 1-1615-315. The scope of work requires the delivery of 40 refurbished assemblies, each accompanied by certificates of conformance. This project falls under NAICS code 336413 and is managed by the Department of Defense through the W6QK Ccad Contr Office, with the place of performance located in Corpus Christi, Texas.

General Info

Replace Teflon liner bearings for 40 AH-64 swashplates at Corpus Christi Army Depot.

Agency

Department Of Defense → W6QK Ccad Contr Office

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment Manufacturing

Place of Performance

Corpus Christi, TX, 78419, USA

Set-Aside

NONE

Documents

This scope was carved out of AP63B4-6246-6056.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

AH-64 Non-Rotating Control Swashplate Assembly Liner Replacement

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 26

subcontract

Response DeadlineNov 3

Submission deadline

Response Deadline

11/03/2026, 09:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W6QK Ccad Contr Office

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → W6QK Ccad Contr Office

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs removal and replacement of Teflon liner bearings for prime contractors on Army Contracting Command Redstone Arsenal Corpus Christi Army Depot projects. Removes existing liners from AH-64 Non-Rotating Control Swashplate P/N 7-311527061 and installs KAHR-LON X-1200S self-lubricating liner systems per OEM Drawing 7-311527061 and DMWR 1-1615-315. Delivers 40 refurbished assemblies with certificates of conformance.

Similar Contracts

Same NAICS industry code

YOKE, BAR T BAY DOOR

Solicitation # SPE8EF-27-T-0137

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 16 hours ago

DEADLINE

STIFFENER, AIRCRAFT

Solicitation # SPE4A7-27-T-2243

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

FILTERING DISK, FLUID

Solicitation # SPE4A7-27-T-1532

Solicitation SPE4A7-27-T-1532 is a fixed-price procurement issued by the DLA Weapons Support ASC for one fluid filtering disk, identified as a critical application item. The required part is ITT Aerospace Controls LLC 73760 P/N 125465A, with National Stock Number 1650010954597. Delivery is required within 20 days after receipt of the order, with an original required delivery date of August 24, 2026. The shipment is designated as FOB Origin and is to be delivered to the AV HQ HHC Special Operations at Fort Campbell, Kentucky. The contract mandates strict quality and security compliance, including ISO 9001:2015 standards for manufacturers and CMMC Level 2 self-assessment. Inspection and acceptance will occur at the origin, utilizing zero-based sampling plans such as MIL-STD-1916 or ASQ H1331. Packaging must adhere to ASTM D3951 and RP001, with marking and labeling following MIL-STD-129. Additionally, the award is subject to the Buy American Act and requires electronic invoicing through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

COVER, ACCESS, AIRCRAFT

Solicitation # SPE4A7-27-T-2212

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

TUBE, STRUCTURAL, DOLLY

Solicitation # SPE8EF-27-T-0153

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 16 hours ago

DEADLINE

SPACER, LINING ASSEM

Solicitation # SPE4A7-27-T-2222

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

BRACKET, STRUCTURAL COM

Solicitation # SPE4A7-27-T-2227

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

PARTS KIT, GLARE SHIELD

Solicitation # SPE4A7-27-T-2209

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

BEAM ASSY, DOOR

Solicitation # SPE4A7-27-T-1609

Solicitation SPE4A7-27-T-1609 is a fixed-price contract issued by the Defense Logistics Agency (DLA) Weapons Support ASC for the procurement of 18 units of BEAM ASSY, DOOR (NSN 1560-01-103-9449). The contract is managed by DLA Distribution Warner Robins, with a need ship date of August 6, 2027, and a final required delivery date of December 15, 2027. Delivery is set as FOB Destination to Robins Air Force Base, Georgia. The procurement incorporates the DLA Master Solicitation for Automated Simplified Acquisitions and may be eligible for automated award. The contract mandates strict adherence to quality and technical standards, including inspection at origin and acceptance at destination. Manufacturers must comply with SAE AS9003 or ISO 9001 standards, and sampling must follow MIL-STD-1916 or ASQ H1331. Packaging and marking must align with RP001 and MIL-STD-129, with specific requirements for bare item marking per RQ017. Cybersecurity compliance is critical, requiring CMMC Level 2 certification and adherence to DFARS 252.204-7012 for safeguarding covered defense information. Export control is a primary concern, as the technical data is subject to ITAR or EAR regulations and requires prior authorization for export or disclosure to foreign nationals. Additionally, the contract enforces domestic sourcing requirements through the Buy American Act and the Berry Amendment. Offerors must be registered in the System for Award Management (SAM) and utilize the Wide Area WorkFlow (WAWF) system for electronic invoicing. A price evaluation preference is available for certified HUBZone small business concerns, while the use of additive manufacturing is prohibited unless specifically authorized.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

BRACE, JACK, TRIPOD

Solicitation # SPE8EF-27-T-0143

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 16 hours ago

DEADLINE

ADAPTER ASSEMBLY, IN

Solicitation # SPE8EF-27-T-0147

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 16 hours ago

DEADLINE

FLANGE, ATTACHMENT, MOLD

Solicitation # SPE4A7-27-T-2229

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

More opportunities from Department Of Defense → W6QK Ccad Contr Office

Same awarding agency

Supply of KAHR-LON X-1200S Liner SystemsThis subcontract involves the manufacture and delivery of qualified KAHR-LON X-1200S self-lubricating liner systems for AH-64 Non-Rotating Control Swashplates. The project supports prime contractors working on Army Contracting Command Redstone Arsenal Corpus Christi Army Depot projects under the Department of Defense. The scope of work requires the delivery of over 80 Teflon liners, each accompanied by certificates of conformance. A critical requirement for this contract is that the provider must hold OEM certification from Sargent Aerospace & Defense, LLC. Performance will take place in Corpus Christi, Texas, under NAICS code 325211. The solicitation was posted on October 26, 2026, with a response deadline of November 3, 2026.

Plastics Material and Resin Manufacturing

POSTED

DEADLINE

Proprietary Dicronite Dry Film Lubrication ApplicationThis subcontract involves the application of proprietary Dicronite dry film lubrication for prime contractors supporting Army Contracting Command Redstone Arsenal projects at the Corpus Christi Army Depot. The scope of work requires the performance of surface preparation and the application of the lubricant to AH-64 Non-Rotating Control Swashplate assemblies, strictly adhering to proprietary Dicronite process specifications. The project mandates the delivery of 40 treated swashplate assemblies. Managed by the Department of Defense under the W6QK Ccad Contr Office, the work is categorized under NAICS code 332813 and will be performed in Corpus Christi, Texas.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

AH-64 Non-Rotating Control Swashplate Assembly Liner Replacement

Solicitation # AP63B4-6246-6056

Solicitation W912NW-27-Q-A001 is a firm fixed price contract issued by the Army Contracting Command Redstone Arsenal Corpus Christi Army Depot for the refurbishment of 40 AH-64 Non-Rotating Control Swashplate assemblies, part number 7-311527061. The scope of work requires a mandatory Teflon liner replacement using the qualified KAHR-LON X-1200S system and the application of proprietary Dicronite dry film lubrication. All work must be performed at the contractor's facility in compliance with OEM Drawing 7-311527061 and DMWR 1-1615-315. The period of performance runs from November 19, 2026, to November 18, 2027, with a strict turnaround time of 20 weeks from the receipt of assets to delivery at the Corpus Christi Army Depot. The contract will be awarded to the responsible offeror providing the lowest price, with the government evaluating the total price of the basic requirement and all options. Technical requirements include strict marking and labeling using two-dimensional data matrix symbology per ISO/IEC 16022 and detailed reporting of unique item identifiers upon delivery. The contractor is responsible for final inspection and functional testing, while final government acceptance is conducted by the CCAD Directorate of Quality Assurance. Administrative requirements include invoicing through the Wide Area Work Flow database and adherence to various federal and defense regulations, including NIST SP 800-171 for cybersecurity and the Buy American and Balance of Payments Program.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

On-Site Contract and Program Management

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Security Compliance and Personnel Clearance Management

Human Resources Consulting Services

POSTED

DEADLINE

Technical Support and Field Service Reporting

Engineering Services

POSTED

DEADLINE

Fluid Cell Press Preventative Maintenance (PM) Services

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Quality Control and Safety Oversight

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Janitorial Supplies and Consumables

Piece Goods, Notions, and Other Dry Goods Merchant Wholesalers

POSTED

DEADLINE

Floor Maintenance and Specialized Cleaning

Carpet and Upholstery Cleaning Services

POSTED

DEADLINE

Routine Custodial Cleaning Services – Medium Facilities

Janitorial Services

POSTED

DEADLINE

Routine Custodial Cleaning Services – Large Facilities

Janitorial Services

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS