Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Government Contract opportunity from Department Of Defense was posted on July 3, 2024. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

AIBU Repair Qualification & Technical Data Package Development

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336412
New
DIBBS
Manufacturing of Seal Retaining Plates (P/N 3014893)This subcontract involves the manufacturing of four precision-machined seal retaining plates for aircraft engine projects under the DLA Weapons Support ASC Supplier Oper OEM Division. The contractor is responsible for fabricating the plates according to Pratt & Whitney Canada Corp P/N 3014893 specifications, utilizing specialized precision machining equipment suitable for critical application items. Strict quality assurance and inspection protocols must be followed, adhering to MIL-STD-1916, ASQ H1331, and MIL-STD-105/ASQ Z1.4 standards. Additionally, the provider must ensure full compliance with DFARS 252.225-7001 regulations. The solicitation was posted on October 28, 2026, with a response deadline of November 5, 2026.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 19 hours ago

DEADLINE

in 7 days
NAICS: 336412
New
DIBBS
Oil Pressure Cover SupplyThis subcontract through the Department of Defense DLA Weapons Support ASC Supplier Oper OEM Division involves the manufacture or sourcing of six oil pressure covers under NSN 2840-01-029-5266. The selected provider will supply these components to prime contractors, ensuring all units meet strict quality standards. Compliance requires the use of MIL-STD-1916 for quality inspections and MIL-STD-105/ASQ Z1.4 for determining sample lot sizes, with a mandate for zero non-conformance acceptance. Eligible bidders must possess a valid UEI and CAGE code to participate in this procurement effort.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 19 hours ago

DEADLINE

in 7 days
NAICS: 336412
New
DIBBS
Heatshield Stiffener Fabrication (NSN 2835-01-324-4956)This subcontract involves the fabrication of 90 heatshield stiffeners for non-aircraft gas turbines to support DLA supply contracts. The manufacturer must produce the units in strict accordance with Basic Drawing NR 53711 5750011 Rev G and Reference Drawing NR 53711 0900-LP-060-4010 Rev 2. All finished and inspected stiffeners must be delivered according to MIL-STD-1916 standards, and the use of additive manufacturing is explicitly prohibited. To be eligible, contractors must hold SAE AS9003 or ISO 9001 certification and maintain CMMC Level 2 compliance. The project falls under NAICS code 336412 and is managed by the DLA Weapons Support ASC Commodities Division within the Department of Defense. Performance for this contract is located in Tracy, California, with a response deadline of November 5, 2026.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 7 days
NAICS: 336412
New
DIBBS
Precision Sheet Metal Fabrication - Engine Shroud AssemblyThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC, involves the precision fabrication of Engine Shroud Assemblies for prime contractors. The scope of work requires specialized sheet metal fabrication adhering to MA-122, surface texture finishing per ASME B46.1, and marking in accordance with MIL-STD-130. To successfully execute the contract, the provider must utilize precision forming equipment and surface texture verification tools to deliver completed assemblies and First Article units. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 336412. Strict compliance standards are mandatory, including the maintenance of CMMC Level 2 certification and adherence to Northrop Grumman Licensing Agreements. Interested parties must respond by November 3, 2026.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 19 hours ago

DEADLINE

in 5 days
NAICS: 336412
New
DIBBS
First Article Testing and Certification for Aircraft Connector AssembliesThis HUBZone set-aside subcontract, issued by the DLA Weapons Support Fluid Handling Division, involves First Article Testing and Certification for aircraft connector assemblies, specifically for NSN 1710-00-831-6821. The selected contractor will support prime contractors by executing FAT protocols, performing detailed measurements and inspections, and generating formal validation reports to verify manufacturing processes. Performance of these services requires the use of certified metrology equipment and CSI-standard testing capabilities. The project is based in New Cumberland, Pennsylvania, and requires the delivery of one tested unit along with a comprehensive FAT report. Interested parties must respond by November 9, 2026, under NAICS code 336412.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 19 hours ago

DEADLINE

in 11 days
NAICS: 336412
New
DIBBS
Manufacturing of Exhaust Gas Oxygen Emission Control SensorsThis small business set-aside subcontract involves the fabrication and assembly of six exhaust gas oxygen emission control sensors for the Department of Defense under DLA Weapons Support Land Supplier Operations Engines. The contractor must build the units in strict accordance with TDP Rev A Gen 3 and Basic Drawing NR 53711 8599721, while ensuring full compliance with MIL-STD-2073-1E packaging standards and NAVSEA 5100-003D mercury containment protocols. Due to the handling of ITAR and EAR data, the successful bidder is required to maintain CMMC Level 2 and JCP certifications. Performance for this project will take place in New Cumberland, Pennsylvania, with responses due by November 9, 2026.
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

about 19 hours ago

DEADLINE

in 11 days
NAICS: 336412
New
DIBBS
Aircraft Compressor Blade Set FabricationThis subcontract involves the fabrication of 10 complete aircraft compressor blade sets under NSN 2840-00-176-3758 for the Department of Defense, specifically the DLA Weapons Support ASC Supplier OEM Division. The project requires the use of precision CNC machining and aerospace-grade alloys to manufacture blades that adhere strictly to technical drawings and quality standards for Critical Safety Items. To be eligible, the manufacturer must hold both SAE AS9100 quality management system certification and specific CSI certification. The contract falls under NAICS code 336412, with a response deadline set for November 5, 2026.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 19 hours ago

DEADLINE

in 7 days
NAICS: 336412
New
DIBBS
Supply of Oil Transfer Assembly (NSN 2010012532060)This subcontract involves the manufacture or sourcing of three Oil Transfer Assemblies under NSN 2010012532060 for prime contractors supporting the DLA Weapons Support ASC Supplier Oper OEM Division. The contractor is responsible for ensuring all assemblies meet strict technical specifications and adhere to the Buy American Act and Berry Amendment requirements. Operational requirements include specific packaging, marking, and palletizing standards according to MIL-STD-2073-1E, MIL-STD-129, and RP001. The work is associated with NAICS code 336412 and will be performed in New Cumberland, Pennsylvania. The response deadline for this opportunity is November 5, 2026.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 19 hours ago

DEADLINE

in 7 days
NAICS: 336412
New
DIBBS
Manufacture and Supply of Aircraft Gas Turbine Engine Exhaust DuctThis subcontract involves the manufacture and supply of one Aircraft Gas Turbine Engine Exhaust Duct for prime contractors supporting the Department of Defense DLA Weapons Support ASC. The contractor is responsible for fabricating the duct using high-temperature alloys to strict aerospace tolerances, ensuring IUID marking complies with MIL-STD-130, and conducting quality assurance testing in accordance with MIL-STD-1916 or ASQ H1331. The project requires a CMMC Level 2 Self-Assessment for security compliance and specifies delivery as FOB Origin. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 336412. The response deadline for this requirement is November 5, 2026.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 19 hours ago

DEADLINE

in 7 days
NAICS: 336412
New
DIBBS
Supply of SARC (NSN 1440016579543)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, requires the fabrication or sourcing of 2,000 SARC components meeting NSN 1440016579543 specifications. The selected provider must apply Item Unique Identification via laser etching in accordance with MIL-STD-130 and ensure all items are packaged according to RP001 standards. The opportunity is a total small business set-aside under NAICS code 336412, with performance located in New Cumberland. To be eligible, contractors must maintain ISO 9001:2015 certification and ensure full compliance with DFARS 252.211-7003. Responses are due by November 5, 2026.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 7 days
NAICS: 336412
New
DIBBS
Supply of Valve Gate Shafts (P/N 111390)This subcontract involves the supply of two Valve Gate Shafts, part number 111390, for prime contractors supporting Department of Defense aircraft component procurements. These components are designated as Critical Application Items and must be delivered FOB Origin. The contract is managed by the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place in New Cumberland. The supplier is required to adhere to strict regulatory and technical standards, including MIL-STD-129 for marking and shipment. Additionally, the provider must maintain compliance with DFARS 252.204-7012 and NIST SP 800-171 security requirements. The procurement falls under NAICS code 336412.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 19 hours ago

DEADLINE

in 7 days
NAICS: 336412
New
DIBBS
Supply of Fluid Filter Elements (NSN 2915-00-511-1364)This subcontract involves the supply of fluid filter elements, specifically item NSN 2915005111364, to prime contractors supporting the Department of Defense DLA Weapons Support ASC Commodities Division. The contractor is responsible for ensuring that all items undergo sampling in accordance with MIL-STD-1916 or ASQ H133 standards. Final delivery of the physical elements must be made to the designated DLA location at Moody Air Force Base by the required delivery date. Logistical requirements mandate that shipments be sent via the fastest traceable means available, with a specific prohibition against using parcel post. The contract falls under NAICS code 336412 and is managed through the DLA Weapons Support agency. Interested parties should note the response deadline of November 5, 2026.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 7 days

AI Contract Overview

Show more

This subcontract, issued by the Department of Defense under agency FA8122 Afsc Pzaab, focuses on the development and submission of a technical data package and a qualification article for AIBU repair on F-16 aircraft. The scope of work encompasses comprehensive test planning and the validation of necessary facilities to ensure repair standards are met. The project is categorized under NAICS code 336412 and is designated for performance in Coffeyville. The solicitation was posted on July 3, 2024, with a response deadline established for July 3, 2026.

General Info

DoD subcontract for F-16 AIBU repair technical data and qualification article development.

Agency

Department Of Defense → FA8122 Afsc Pzaab

NAICS

336412 - Aircraft Engine and Engine Parts Manufacturing

Place of Performance

S Coffeyville, OK, 73145, USA

Set-Aside

NONE

Documents

This scope was carved out of F16_AIBU_NSN5895013310720_PN_5188110_008.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

F16_AIBU_NSN5895013310720_PN_5188110_008

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FA8122 Afsc Pzaab
ContactsNo contacts available
OfficeN/A
Organization / AgencyDepartment Of Defense → FA8122 Afsc Pzaab
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Develop and submit a technical data package (TDP) and qualification article for AIBU repair on F-16 aircraft, including test planning and facility validation.

More opportunities from Department Of Defense → FA8122 Afsc Pzaab

Same awarding agency

NAICS: 541380
New
Federal
Aerospace Component Inspection and NDT ServicesThis subcontract for Aerospace Component Inspection and NDT Services involves providing quality assurance and non-destructive testing for Air Force engine projects at Tinker AFB. The scope of work focuses on inspecting the material integrity, dimensions, and welds of 17-4PH stainless steel frames utilizing X-ray, Ultrasonic, and Dye Penetrant equipment. The selected provider must employ certified NDT technicians and adhere strictly to AS9100 standards to deliver necessary inspection reports and airworthiness certifications. Managed under the Department of Defense, the opportunity is categorized under NAICS code 541380. Interested parties must submit their responses by November 10, 2026. The performance of these specialized technical services will take place in the 73145 zip code area to support prime contractors on critical aerospace components.
Testing Laboratories and Services

POSTED

3 days ago

DEADLINE

in 12 days
View Details
NAICS: 332813
New
Federal
Aerospace Component Finishing and Surface TreatmentThis subcontract involves providing specialized surface treatments and aerospace-grade coatings for F118 front frames made of 17-4PH stainless steel. The work supports prime contractors on Air Force engine projects based at Tinker AFB, focusing on preventing corrosion and enhancing the durability of components operating in harsh engine environments. The project is managed under the Department of Defense and requires the service provider to hold NADCAP or equivalent aerospace finishing certifications to ensure strict quality standards. Interested parties must respond by November 10, 2026, for this effort categorized under NAICS code 332813.
Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

3 days ago

DEADLINE

in 12 days
View Details
NAICS: 336411
New
Federal
F118 Front Frame Precision Remanufacturing ServicesThis subcontract involves the precision remanufacturing of F118 Front Frames to support Air Force engine projects at Tinker AFB. The scope of work requires the machining and restoration of 221 lb stainless steel frames designed to facilitate deicing air flow through struts and support vertical engine mounts and oil supply and scavenge tubes. The project demands large-scale precision CNC machining capabilities for components measuring 60 by 60 inches, as well as the application of UID marking. Managed under the Department of Defense and NAICS code 336411, the final deliverable is the provision of fully remanufactured F118 Front Frames.
Aircraft Manufacturing

POSTED

3 days ago

DEADLINE

in 12 days
View Details
NAICS: 331419
New
Federal
17-4PH Stainless Steel Raw Material SupplierThis subcontract involves the sourcing, certification, and delivery of aerospace-grade 17-4PH Stainless Steel raw materials for prime contractors supporting Air Force engine component projects at Tinker AFB. The required material consists of certified stainless steel stock for components measuring 60 by 60 by 12 inches with a weight of 221 lbs. All materials must strictly adhere to aerospace standards and be compatible with approved sources as defined under FAR 52.209-1. Managed by the Department of Defense under agency FA8122 Afsc Pzaab, the opportunity falls under NAICS code 331419. The solicitation was posted on October 26, 2026, with a response deadline of November 10, 2026. Performance for this contract is centered in the 73145 zip code area.
Primary Smelting and Refining of Nonferrous Metal (except Copper and Aluminum)

POSTED

3 days ago

DEADLINE

in 12 days
View Details
New
Federal
F118 Front Frame Remanufacture
Solicitation # FD20302600592
Solicitation FD20302600592 is a sole source acquisition for the remanufacture of the F118 Front Frame, a 17-4PH Stainless Steel component used in F118 Engines to provide deicing air, house oil supply and scavenge tubes, and accommodate vertical engine mounts. The item measures 60 by 60 by 12 inches and weighs 221 pounds. This is a Firm Fixed Price requirements contract spanning five years, consisting of one base year and four one-year options. Each year has a base estimated quantity of 11 units, with option year deliveries required at a rate of one unit per month after receipt of order, although early delivery is acceptable. The final destination for all deliverables is Tinker Air Force Base, Oklahoma. To be eligible for award, offerors must be an approved source in accordance with FAR 52.209-1, and are encouraged to submit Source Approval Requests as soon as possible. Unique Identification requirements will apply if the unit price exceeds 5,000 dollars. The procurement is managed by the Department of Defense through the AFSC/PZAAA office at Tinker AFB, with William Loftis serving as the Contracting Officer and Samantha Lay as the Buyer. The estimated solicitation issue date is November 18, 2026, with an estimated closing date of December 18, 2026. An Ombudsman has been appointed to address contractor concerns during the proposal development phase.

POSTED

3 days ago

DEADLINE

in 12 days
View Details
NAICS: 811210
Federal
Precision Aerospace Component RemanufacturingThe Precision Aerospace Component Remanufacturing subcontract involves providing specialized maintenance and repair services for F110 Motional Transducer projects supporting the Air Force Sustainment Center. The scope of work includes the disassembly, cleaning, and replacement of internal components, specifically focusing on low and medium levels of repair such as the replacement of connectors and core or shaft assemblies to deliver fully remanufactured units. To execute this contract, the provider must maintain a clean-room environment and hold several critical certifications, including AS 9100, NATO AQAP2070, and CMMC. Additionally, all units must feature UID 2D data matrix marking. This Department of Defense effort is categorized under NAICS code 811210, with a response deadline set for November 23, 2026.
Electronic and Precision Equipment Repair and Maintenance

POSTED

7 days ago

DEADLINE

in 25 days
View Details
NAICS: 334417
Federal
Aerospace Electrical Connector SupplierThis subcontract opportunity with the Department of Defense, specifically the Air Force Sustainment Center, involves the sourcing and delivery of high-reliability, aerospace-grade electrical connectors for F110 Motional Transducer projects. The selected supplier will provide components compatible with the F110 weapon system, ensuring all parts meet strict aerospace standards for prime contractors. To ensure quality and security, the contractor must maintain AS 9100 certification and provide comprehensive Supply Chain Risk Management documentation to mitigate the risk of counterfeit parts. Interested parties must respond by November 23, 2026, for this requirement categorized under NAICS code 334417, with performance taking place in zip code 73145.
Electronic Connector Manufacturing

POSTED

7 days ago

DEADLINE

in 25 days
View Details
NAICS: 334419
Federal
F110 Motional Transducer Core and Shaft Assembly SupplierThis subcontract involves the manufacture and delivery of specialized internal components for the Air Force Sustainment Center F110 Motional Transducer remanufacture projects. The supplier is responsible for providing certified, flight-ready core assemblies, shaft assemblies, and major subassemblies corresponding to specific manufacturer part numbers. The contract is managed under the Department of Defense and requires strict adherence to quality and security standards, including AS 9100, ISO 9001:2000, and a Counterfeit Prevention Plan. Performance will take place in the 73145 zip code area, with a response deadline set for November 23, 2026.
Other Electronic Component Manufacturing

POSTED

7 days ago

DEADLINE

in 25 days
View Details
NAICS: 336412
Federal
F110 Motional Transducer Remanufacture
Solicitation # FA812227RB002
The United States Air Force, through the Air Force Sustainment Center at the Oklahoma City Logistics Center, is soliciting the remanufacture of the F110 Motional Transducer under solicitation FA812227RB002. This requirement is structured as a Firm-Fixed Price, Indefinite Delivery Requirements Type contract consisting of a one-year basic period and four one-year option periods. The scope of work includes both medium and low levels of repair, involving the replacement of core and shaft assemblies, connectors, and major subassemblies. Due to the specialized nature of the equipment, the government anticipates a sole source award to an authorized distributor of a qualified source, and all offerors must be approved sources in accordance with FAR 52.209-1. Key administrative and technical requirements include the use of the Wide Area WorkFlow system for electronic invoicing and the mandatory application of unique item identifiers using two-dimensional data matrix symbology. Offerors must comply with stringent quality standards, including ISO 9001:2000, AS 9100, and NATO AQAP2070, and must provide a Cybersecurity Maturity Model Certification unique identifier. The acquisition is unrestricted, though a 10 percent price evaluation preference is granted to HUBZone small business concerns. Deliverables include various reporting requirements such as Commercial Asset Visibility, Government Property Inventory, and Supply Chain Risk Management plans. Inspection and acceptance will occur at the DLA Distribution Depot Oklahoma at Tinker AFB.
Aircraft Engine and Engine Parts Manufacturing

POSTED

7 days ago

DEADLINE

in 28 days
View Details
NAICS: 332999
Federal
Aerospace Component Cleaning and Inspection ServicesThe Aerospace Component Cleaning and Inspection Services subcontract involves providing specialized industrial cleaning and non-destructive testing for prime contractors supporting AFSC Pzaab projects at Tinker AFB. The scope of work focuses on the cleaning of fuel system components and the execution of inspections for fatigue, wear, or cracks utilizing Dye Penetrant or Magnetic Particle equipment in strict accordance with AF Technical Orders. To qualify for this engagement, the service provider must maintain ISO 9001:2000 certification. Key deliverables include the return of cleaned components accompanied by comprehensive inspection reports. This opportunity is categorized under NAICS code 332999 and is managed under the Department of Defense.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

13 days ago

DEADLINE

in 18 days
View Details
NAICS: 336413
Federal
F108-201 Fuel Pump Component SupplierThe F108-20 Fuel Pump Component Supplier subcontract, issued by the Department of Defense for AFSC Pzaab at Tinker AFB, involves the procurement and delivery of certified aircraft-grade components. The scope of work focuses on supplying new OEM or approved equivalent long-lead parts, specifically internal pump seals, bearings, gears, or housings compatible with part numbers 708400-1 through 708400-5. Strict adherence to technical and logistical standards is required, including Item Unique Identification compliance and Mil-Std-129R packaging and marking. This opportunity falls under NAICS code 336413, with a response deadline set for November 16, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

13 days ago

DEADLINE

in 18 days
View Details
NAICS: 332911
Federal
F108-201 Main Fuel Pump RemanufactureThis subcontract involves the full-cycle remanufacture of F108-201 Main Fuel Pumps for prime contractors supporting Department of Defense projects at AFSC Pzaab, Tinker AFB. The scope of work includes the disassembly of pump assemblies, precision cleaning, and the inspection and remanufacturing of components to ensure they meet original technical specifications. Each completed pump must be delivered with a Certificate of Conformance. To qualify for this project, the provider must operate an FAA Part 145 rated facility for CFM56-2B engine components and utilize test equipment that is ANSI/NCSL 2340-1 compliant. The opportunity was posted on October 16, 2026, with a response deadline of November 16, 2026, falling under NAICS code 332911.
Industrial Valve Manufacturing

POSTED

13 days ago

DEADLINE

in 18 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 336412
Awarded
Federal
28--VALVE,BLEED,TURBINE, IN REPAIR/MODIFICATION OF
Solicitation # N0038324QP368
Navsup Weapon Systems Support

POSTED

over 2 years ago

CLOSED

over 2 years ago
View Details
NAICS: 336412
Awarded
Federal
PRATT & WHITNEY & GENERAL ELECTRIC ENGINE REPAIR
Solicitation # 19AQMM24R0146
Acquisitions - Aqm Momentum

POSTED

over 2 years ago

CLOSED

about 2 years ago
View Details
NAICS: 336412
Closed
Federal
120 of the three-dimensional (3D) (CVI-SiC/SiC), (CMC) dogbone specimen
Solicitation # 80NSSC24875111Q
NASA Shared Services Center

POSTED

over 2 years ago

CLOSED

over 2 years ago
View Details
NAICS: 336412
Awarded
Federal
29--PISTON-DAMPER
Solicitation # SPE4A724T370Y
DLA Aviation

POSTED

over 2 years ago

CLOSED

over 2 years ago
View Details
NAICS: 336412
Awarded
Federal
29--FILTER ELEMENT,FLUI
Solicitation # SPE4A724R0608
DLA Aviation

POSTED

over 2 years ago

CLOSED

over 2 years ago
View Details
NAICS: 336412
Awarded
Federal
29--TURBOSUPERCHARGER,N
Solicitation # N0010424RCB40
Navsup Weapon Systems Support Mech

POSTED

over 2 years ago

CLOSED

over 2 years ago
View Details
NAICS: 336412
Awarded
Federal
TANK,LUBRICATING OI
Solicitation # SPRTA1-24-Q-0320
Ok DLA Aviation At Oklahoma City

POSTED

over 2 years ago

CLOSED

about 2 years ago
View Details
NAICS: 336412
Awarded
Federal
29--STARTER,ENGINE,AIR, IN REPAIR/MODIFICATION OF
Solicitation # N0038324RA066
Navsup Weapon Systems Support

POSTED

over 2 years ago

CLOSED

over 2 years ago
View Details
NAICS: 336412
Awarded
Federal
28--CASE,DIFFUSER,AIRCR- AND SIMILAR REPLACEMENT PARTS
Solicitation # N0038324RS202
Navsup Weapon Systems Support

POSTED

over 2 years ago

CLOSED

over 2 years ago
View Details
NAICS: 336412
Awarded
Federal
31--BEARING,PLAIN,ROD END
Solicitation # SPE4A624T07AU
DLA Aviation

POSTED

over 2 years ago

CLOSED

over 2 years ago
View Details
NAICS: 336412
Awarded
Federal
29--SOLENOID START ASSE
Solicitation # SPE4A524T452R
DLA Aviation

POSTED

over 2 years ago

CLOSED

over 2 years ago
View Details
NAICS: 336412
Awarded
Federal
29--TORQUE TUBE ASSY
Solicitation # SPE4A724T3925
DLA Aviation

POSTED

over 2 years ago

CLOSED

over 2 years ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS