Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

--Air Driven Gas Booster Pumps

Active
USA-SNOTE-070723-004Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Directorate of Contracting at Fort Campbell, Kentucky, intends to procure four Air Driven Gas Booster Pumps through a sole-source acquisition with Haskel International, Inc. of Burbank, California. This procurement is justified under statutory authority due to safety regulations enforced by the Department of Defense, as Haskel International is the only U.S. Navy-approved manufacturer for these pumps used in scuba operations support. The contract will be firm-fixed-price and supply-type, focusing on a specific model (27187, modified for oxygen service) that features a two-stage, air-driven, balanced opposed piston design capable of producing gas outlet pressures up to 5000 psi. These pumps are designed for high safety and reliability standards, including triple-sealed, non-lubricated components and corrosion resistance, with detailed performance specifications ensuring optimal operation under specified air drive pressures and flow rates. The procurement falls under NAICS code 333996 with a small business size standard of 500 employees and will be conducted without full and open competition, classifying it as a Commercial Item acquisition. Although this is not a solicitation for competitive offers, firms that believe they can meet the stated requirements were invited to submit written notifications within five days of the notice’s publication. Responses were to be evaluated at the discretion of the Government, with the intention to proceed with negotiations with Haskel International if no suitable alternative suppliers are identified. Delivery of the pumps will be to Fort Campbell, Kentucky, and all communications regarding the procurement were directed to specified contacts with strict submission guidelines to ensure compliance with the acquisition protocol.

General Info

Fort Campbell contracts Haskel International for four specialized, high-pressure air-driven gas booster pumps.

NAICS

333996 - Fluid Power Pump and Motor Manufacturing

Place of Performance

KY

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

Posted

special-notice

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QM Micc-Ft Campbell
ContactsNo contacts available
OfficeFORT CAMPBELL, KY, 42223-5358, USA
Office AddressFORT CAMPBELL, KY, 42223-5358, USA
ContactsNo contact information available

Full Description

Show more
The Directorate of Contracting (DOC), Fort Campbell, KY, has a requirement for Air Driven Gas Booster Pumps. The procurement will be conducted on a sole source basis in accordance with the statutory authority of 10 U.S.C. 2304(c)(1) as implemented b y FAR 6.302-1 and awarded on an unrestricted basis. The Agency intends to enter into a firm-fixed-price, supply-type contract with Haskel International, Inc. located in Burbank CA. The basis for restricting competition is the regulatory restrictions for safety reasons within the Department of Defense. This is the only manufacturer that is approved by the U.S. Navy to provide this pump for scuba operations support. Required quantity is 4 each of the Air Driven Gas Booster Pumps with the following specifi cations: Gas Booster: Model 27187 (28881-AGT-15/30 modified for oxygen service). Air driven, two stage, reciprocating air motor, balanced opposed piston type. The high pressure oxygen barrels are triple sealed, non-lubricated, hydrocarbon free, and separated fro m the air drive. Air drive section: NO OILING required, factory lubricated, corrosion resistant. Cooling with air exhaust to both stages and intercooler. This model booster (AGT-15/30) is capable of gas outlet pressures equal to 30 X the Air Drive Pressure, plus 2 X the Gas Inlet Pressure. E.g.: With 75 psi air drive (5 bar) and 500 psi gas inlet (34 bar), the booster will only produce or stall at 3,250 psi (224 bar). 30 X 75 psi + 2 X 500 psi = 3,250 psi outlet. Minimum Air Drive Quantity: 70 SCFM for full cycling speed. Lower volumes will cause the booster to cycle slower and result in slower fill times. Air drive pressure range: 40 - 150 psi (3 - 10 bar). Maximum gas inlet: 2500 psi (172 bar) (First Stage X Max. Air Drive, 15 X 150=2500). Maximum gas outlet: 5000 psi (345 bar). Equipment will be delivered to Fort Campbell, KY. NAICS code for this procurement is 333996 and the small business size standard is 500 employees. This sole source requirement will be procured under Commercial Items and Other Than Full and Open Competiti on, and awarded on an unrestricted basis. THIS NOTICE IS NOT A REQUEST FOR COMPETITIVE OFFERS and solicitation will not be issued; however, any firm that believes it can meet the requirements may give written notification to the Contracting Officer within 5 days from the date of the publication of this synopsis. Supporting evidence must be furnished in sufficient detail to demonstrate the ability to comply with the requirements listed. Responses received will be evaluated; however, a determination by the Government not to compete the proposed procurement based upon responses to this notice is solely within the discretion for the Government. See Numbered Note 22. If no responses are received, the Government will proceed with the sole source negotiation wi th the manufacturer, Haskel International, Inc. Responses are due by 30 July 2007, 3:00 p.m. (CST). Responses shall be submitted via e-mail to the following address: contact@example.gov or faxed responses will be accepted at +1 (555) 000-0000. Tel ephone requests or inquires will not be accepted. The points of contact are Ms. Dennis Bertrand, +1 (555) 000-0000, or Ms. Gertrude Colbert, +1 (555) 000-0000.

Similar Contracts

Same NAICS industry code

NAICS: 333996
New
PUMP,AXIAL PISTONS — 4320014299248 — SPRMM127QGA30
Solicitation # SPRMM127QGA30
Solicitation SPRMM127QGA30, issued by NAVSUP Weapons Systems Support for the Department of the Navy, is a fixed-price procurement for the manufacture of axial piston pumps. The contract covers two specific National Item Identification Numbers: CLIN 0001 (NIIN 014299248) and CLIN 0002 (NIIN 014299251). This is a Total Small Business Set-Aside acquisition where the award will be made to the responsible offeror providing the lowest priced, technically acceptable offer. Technical acceptability is based on compliance with solicitation instructions and the absence of exceptions to the terms. Evaluation also considers item, price, and supplier risk via the Supplier Performance Risk System. The contract mandates strict adherence to quality and technical standards, requiring a quality system compliant with ISO 9001. All items must be mercury-free to prevent corrosion and toxicity risks on submarines and surface ships. Physical identification and marking must follow MIL-STD-129, while preservation and packaging must comply with MIL-STD-2073. Inspection and acceptance are conducted at the origin, specifically at the contractor or subcontractor plant. Administrative requirements include electronic invoicing through PIEE-WAWF and compliance with various trade and domestic preferences, including the Buy American-Balance of Payments Program. Offerors who are not the original equipment manufacturer must provide the OEM CAGE code and part number to be considered.
SPRMM1 DLA Mechanicsburg

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333996
New
DIBBS
PUMP, HYDRAULIC RAM, HAN
Solicitation # SPE7M2-27-T-0508
This solicitation, issued by the DLA Weapons Support Nuclear Reactor Program under solicitation number SPE7M2-27-T-0508, is for the procurement of 66 hand-driven hydraulic ram pumps (NSN 4320-01-460-3685). The requirement is designated as a critical application item and is a restricted source item requiring engineering source approval by the government design control activity. The procurement is a total small business set-aside under NAICS code 333996, with a required delivery date of June 29, 2027, and a delivery lead time of 220 days after receipt of order. Shipping is established as FOB Origin, with the final destination being the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to technical and quality requirements, including DLA packaging requirements (RP001), MIL-STD-2073-1E for packaging data, and MIL-STD-129 for marking. A specific restriction is placed on the use of mercury or mercury-containing compounds, except where functionally required. Inspection and acceptance will occur at the destination. Administrative requirements include electronic invoicing via the Wide Area WorkFlow (WAWF) system and compliance with the Buy American Act and Berry Amendment. All quotations must be submitted through the DLA Internet Bid Board System (DIBBS) by November 9, 2026.
DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

1 day ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → W6QM Micc-Ft Campbell

Same awarding agency

NAICS: 236220
Federal
The Mission and Installation Contracting Command (MICC), Fort Campbell, KY, is issuing this Special Notice to identify small business concerns interested in receiving future request for quotations for various construction and related facility-support.
Solicitation # MICCFTCINNOVATION
The Mission and Installation Contracting Command at Fort Campbell, KY, is establishing a contractor repository to identify qualified small businesses for future construction and facility support requirements. This initiative aims to streamline the procurement process and increase opportunities for small businesses, including those with SDB, 8(a), HUBZone, SDVOSB, and WOSB designations. The primary focus is on NAICS Code 236220 for commercial and institutional building construction, covering services such as general repair, electrical, plumbing, HVAC, masonry, and demolition. Work will be performed at Fort Campbell and surrounding areas in Kentucky and Tennessee, with individual purchase orders expected to range from 2,000 to 9,000,000 dollars. Interested firms must maintain active SAM registration, possess a valid Unique Entity Identifier, and be able to meet specific insurance and bonding requirements. This notice is not a solicitation or a guarantee of work, but rather a method for the government to build a list of capable vendors to receive future requests for quotations via email.
Commercial and Institutional Building Construction

POSTED

about 1 month ago

DEADLINE

in 11 months
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS