Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Aircraft Access Door Fabrication and Assembly

Active

Federal

Response Deadline09/29/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract with the Department of Defense, specifically for ASC Supplier Oper AE and AF Div, involves the fabrication and assembly of aircraft access doors. The contractor is responsible for producing three completed doors under NSN 1560-01-296-4941, adhering to specific technical drawings including B39999 MP170-P001, GA0103-P001, LA0101-P005, and LA0102-P030. Key deliverables include the finished door assemblies and a certified test report following First Article Testing. To qualify for this project, the contractor must possess a valid CAGE code and meet CMMC Level 2 cybersecurity requirements. Additionally, the contractor must ensure all hazardous materials are packaged in strict accordance with 29 CFR 1910.1200. The opportunity falls under NAICS code 336413, with a response deadline of September 29, 2026.

General Info

DoD subcontract for fabricating three aircraft access doors with CMMC Level 2 compliance.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A7-26-Q-1108.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

DOOR, ACCESS, AIRCRAFT

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 15

subcontract

Response DeadlineSep 29

Submission deadline

Response Deadline

09/29/2026, 05:00:00 PM UTCin 13 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufactures aircraft access doors for prime contractors on ASC Supplier Oper AE and AF Div projects. Fabricates door assemblies per drawings B39999 MP170-P001, GA0103-P001, LA0101-P005, and LA0102-P030. Performs First Article Testing (FAT) and packages hazardous materials per 29 CFR 1910.1200. Requires CMMC Level 2 and a valid CAGE code. Delivers 3 completed doors (NSN 1560-01-296-4941) and a certified test report.

Similar Contracts

Same NAICS industry code

Supply of Structural Bracket (P/N 141T4853Y12)This subcontract, issued by the Department of Defense ASC Commodities Division, involves the manufacture or procurement of a specific aerospace-grade structural bracket, Boeing Part Number 141T4853Y12. The contractor is responsible for ensuring full supply chain traceability in accordance with DLAD Procurement Notes C03 and must adhere to quality assurance standards per MIL-STD-1916 or ASQ H1331. All shipments must be packaged and marked according to MIL-STD-2073-1E and MIL-STD-129. The project is categorized under NAICS code 336413 and will be performed in New Cumberland, Pennsylvania. Interested parties must respond by September 23, 2026, to provide these components for prime contractors delivering DLA supply contracts.

ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

Electrostatic Air Filter SupplierThis subcontract opportunity with the Defense Logistics Agency involves the supply of electrostatic air filters for prime contractors. The selected provider will be responsible for manufacturing or procuring filtration units that strictly adhere to the DLA Master List of Technical and Quality Requirements, ensuring all electrostatic filtration media and housing are compliant with DFARS 252.223-7008. The contractor must follow MIL-STD-2073-1E and RP001 packaging standards to deliver completed, packaged, and palletized units. This requirement falls under NAICS code 336413, with a response deadline of September 28, 2026, and performance located at FPO 96667.

Defense Logistics Agency

POSTED

about 20 hours ago

DEADLINE

Manufacture of Tail Rod Assembly (CSI)This subcontract involves the manufacture of 47 units of the Rod Assembly, Tail R, identified by NSN 1680011898766, for prime contractors supporting DLA supply contracts. The work is performed under the ASC Commodities Division of the Department of Defense and is designated as a Total Small Business Set-Aside. Production must adhere to Reference Drawing NR 78286 70103-11005 Revision H and TDP Rev A Gen 1, utilizing precision machining to satisfy Critical Safety Item tolerances and the DLA Master List of Technical and Quality Requirements. The project is categorized under NAICS code 336413 and will be executed in New Cumberland, Pennsylvania. The solicitation was posted on September 15, 2026, with a response deadline of September 23, 2026.

ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

Supplier of Plate, Electrical Shield (NSN 5999-01-564-2649)This subcontract involves the supply of one aircraft electrical shield plate, specifically Sikorsky Aircraft Corporation part number 70080-20335-101 with NSN 5999-01-564-2649, for prime contractors working on CCAD Detachment projects. The supplier is responsible for the manufacture or distribution of the component, ensuring it meets all technical specifications. The contract requires that non-hazardous materials be packaged according to ASTM D3951 and palletized per RP001. Performance of the contract will take place in Corpus Christi, Texas, under the Department of Defense. The solicitation was posted on September 15, 2026, with a response deadline of September 23, 2026, falling under NAICS code 336413.

CCAD DETACHMENT

POSTED

about 20 hours ago

DEADLINE

Aerospace Grade Material Supply (Cylinder Housing Stock)This subcontract, titled Aerospace Grade Material Supply (Cylinder Housing Stock), involves the procurement of raw certified aerospace-grade metal stock, such as billets or tubing, to support prime contractors on DLA aircraft part contracts. The supplier is responsible for sourcing high-strength aerospace alloys and providing essential documentation, including Material Test Reports and certifications of conformance. Managed by the Department of Defense under the ASC Supplier Oper AE and AF Div, the contract requires strict adherence to DFARS 252.225-7001 Buy American requirements. The performance of the contract is centered in Tracy, California, with a response deadline of September 23, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 20 hours ago

DEADLINE

Aircraft Floor Component Supplier (NSN 1560016304275)This subcontract through the Department of Defense ASC Commodities Division requires the manufacture or sourcing of one Aircraft Floor, part number 71209–22011–047 from Sikorsky Aircraft Corporation. The supplier must ensure the component meets Critical Application quality standards, provide the necessary certifications for Critical Application Items, and perform Physical Identification and Bare Item Marking according to requirement RQ017. The project is categorized under NAICS code 336413 and is intended for prime contractors delivering DLA supply contracts. Performance will take place in Jacksonville, Florida. Interested parties must respond by the deadline of September 23, 2026.

ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

Aircraft Pressure Relief Valve SupplierThis subcontract with the Department of Defense ASC Supplier Oper OEM Division involves the supply of 10 aircraft pressure relief valves for prime contractors on DLA supply contracts. The supplier is responsible for manufacturing or sourcing components that meet NSN 4920015016764 specifications, ensuring all parts are free of Government Identification according to RQ011. Quality control must be performed using calibrated M&TE per RT001, and all packaging and marking must adhere to MIL-STD-129. The contract is categorized under NAICS code 336413 and specifies the place of performance in New Cumberland, Pennsylvania. The response deadline for this opportunity is September 23, 2026.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 20 hours ago

DEADLINE

Supply of Aircraft Mooring Tie-Downs (NSN 1730-01-668-3577)This subcontract involves the supply of 20 aircraft mooring tie-downs meeting NSN 1730-01-668-3577 technical specifications for prime contractors supporting Department of Defense DLA supply contracts. The provider is responsible for manufacturing or sourcing the hardware and ensuring all items are packaged for Government-Arranged Transportation under the First Destination Transportation program. Compliance with FAR 52.223-3 regarding hazardous materials is required for this engagement. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 336413, with performance taking place in San Diego, California. Interested parties must respond by September 28, 2026, to meet the requirements set forth by the Construction and Equipment Manufacturing and Construction agency.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 20 hours ago

DEADLINE

Aircraft Skin Material Supplier (NSN 1560016079322)This subcontract involves the manufacture or sourcing of aerospace-grade aircraft skin material, specifically part NSN 1560016079322, for prime contractors delivering to the Department of Defense under the ASC Supplier Oper OEM Division. The supplier is responsible for ensuring all materials meet strict quality control standards and adhere to mandatory packaging requirements per MIL-STD-2073-1E, with a specific prohibition against ASTM D 3951 and commercial bulk packaging. The project is categorized under NAICS code 336413 and will be performed at Fort Carson, ZIP code 80913-0000. Interested parties must submit their responses by September 23, 2026, following the solicitation posted on September 15, 2026.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 20 hours ago

DEADLINE

Precision Aerospace Component FabricationThe Precision Aerospace Component Fabrication subcontract involves the production of aircraft fairings for prime contractors under the ASC Supplier Oper AE and AF Div projects. The scope of work includes machining, forming, and additive manufacturing in accordance with L31 Additive Manufacturing standards from June 2018, utilizing materials that conform to AMS 4048. All deliverables must be finished, unpainted, and uncoated. Quality control will be maintained through sampling methods adhering to MIL-STD-1916 or ASQ H1331, Table 1. This project is managed by the Department of Defense and is performed at Tinker AFB. The response deadline for this opportunity is September 23, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 20 hours ago

DEADLINE

Supply of Pitot-Static Tubes (NSN 6610-00-526-7852)This subcontract through the Department of Defense ASC Supplier Oper OEM Division involves the supply of eight Pitot-Static Tubes, identified by NSN 6610-00-526-7852, for prime contractors fulfilling DLA Aviation supply contracts. The selected provider is responsible for manufacturing or sourcing the components and must ensure all items are packaged according to RP001 and marked in compliance with MIL-STD-129. Performance will take place in Cherry Point, and the contractor must maintain an active SAM registration while adhering to all DLA quality and sampling requirements. The solicitation was posted on September 15, 2026, with a response deadline of September 23, 2026, under NAICS code 336413.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 20 hours ago

DEADLINE

Supply of Holding Clamp, Spring C (Sikorsky P/N 70700-77316-041)This subcontract through the Department of Defense ASC Supplier Oper OEM Division requires the manufacture or distribution of four units of Holding Clamp, Spring C, identified by Sikorsky part number 70700-77316-041 and NSN 4920-01-156-0956. As a Critical Application Item, the hardware must meet stringent quality certifications and traceability requirements, with packaging adhering to ASTM standards. Eligible prime contractors must maintain an active SAM registration and provide critical application certification. The performance of this contract is based in New Cumberland, Pennsylvania, under NAICS code 336413, with a response deadline of September 23, 2026.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 20 hours ago

DEADLINE

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

Additive Manufacturing of Receiver-Transmitter ComponentsThis subcontract with the Department of Defense, specifically the ASC Supplier Oper AE and AF Div, involves the additive manufacturing of receiver-transmitter components for prime contractors fulfilling DLA supply contracts. The work must be performed using industrial 3D printing processes that adhere to L31 Additive Manufacturing standards from June 2018. All produced components or completed assemblies are subject to evaluation by the Engineering Support Activity to ensure acceptability. The contract requires strict adherence to NIST SP 800-171 compliance for data security. Performance of the contract is based in New Cumberland, Pennsylvania, under NAICS code 332710. The solicitation was posted on September 15, 2026, with a response deadline of September 23, 2026.

POSTED

about 20 hours ago

DEADLINE

Supply of Receiver-Transmitter (NSN 5895-01-667-1051)This subcontract involves the supply of two Receiver-Transmitter units under NSN 5895-01-667-1051 for prime contractors supporting DLA supply contracts. The hardware must be delivered in accordance with First Destination Transportation program requirements and the place of performance is located in New Cumberland. The contract is issued by the Department of Defense through the ASC Supplier Oper AE and AF Div under NAICS code 423610. A critical requirement for this engagement is strict adherence to NIST SP 800-171 standards to ensure the protection of Controlled Unclassified Information. The response deadline for this opportunity is September 23, 2026.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 20 hours ago

DEADLINE

DLA Compliant Packaging and ShippingThis subcontract with the Department of Defense, specifically the ASC Supplier Oper AE and AF Div, involves specialized packaging and preparation of hardware components for prime contractors on DLA supply contracts. The contractor is responsible for the delivery of 424 properly packaged and labeled spacers, adhering to strict guidelines including MIL-STD-2073-1E and DLA Packaging Requirements for Procurement. The work will be performed in New Cumberland, Pennsylvania, under NAICS code 484220. The project requires the use of specified preservation materials and cushioning to ensure compliance with quality and preservation standards. The response deadline for this opportunity is September 23, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 20 hours ago

DEADLINE

Manufacturing of Sleeve Spacers (NSN 5365-01-368-8865)This subcontract with the Department of Defense involves the manufacturing of 424 precision sleeve spacers, identified by NSN 5365-01-368-8865. The contractor is responsible for performing machining and forming processes to ensure all units meet the specific dimensions and tolerances outlined in the DLA Master List of Technical and Quality Requirements RA001. All production must utilize domestic materials and precision machining equipment, with quality assurance sampling conducted according to MIL-STD-1916 or ASQ H1331 standards. The project falls under NAICS code 332510 and is managed by the ASC Supplier Oper AE and AF Div. Performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties must note the response deadline of September 23, 2026, following the posting date of September 15, 2026.

Hardware Manufacturing

POSTED

about 20 hours ago

DEADLINE

Military-Grade Packaging and Delivery ServicesThis subcontract for Military-Grade Packaging and Delivery Services involves providing specialized packaging, final packing, and marking for prime contractors on DLA aerospace supply contracts. The service provider is responsible for packing and marking tool assemblies in accordance with MIL-STD-2073-1E and MIL-STD-129, with palletization following RP001 standards. Technical requirements include cleaning and drying preservation using specific materials and strict compliance with IP056 mercury prohibitions to ensure a fully packed, marked, and palletized assembly ready for FOB Origin shipment. The contract is managed by the Department of Defense under the ASC Supplier Oper AE and AF Div, with the place of performance located in New Cumberland, Pennsylvania. Classified under NAICS code 488510, the opportunity was posted on September 15, 2026, with a response deadline of September 23, 2026.

Freight Transportation Arrangement

POSTED

about 20 hours ago

DEADLINE

Manufacturing of Tool Assembly ComponentsThis subcontract involves the precision CNC machining of tool assembly depression components for prime contractors under DLA aerospace supply contracts. The manufacturer must fabricate parts according to Basic Drawing NR 53711 7068433 Rev A and Reference Drawing NR 96169 ERH832-0399A124 Rev A, ensuring all finished components meet specific TDP specifications. Compliance with RQ017 marking and MIL-STD-1916 sampling is mandatory. The contract is managed by the Department of Defense under the ASC Supplier Oper AE and AF Division, with performance located in New Cumberland, Pennsylvania. To be eligible, the provider must maintain CMMC Level 2 certification and adhere to DLA RA001 compliance. The opportunity is categorized under NAICS code 332710, with a response deadline of September 23, 2026.

POSTED

about 20 hours ago

DEADLINE

Supply of Specialized Electronic Components for Receiver-TransmitterThis subcontract, titled Supply of Specialized Electronic Components for Receiver-Transmitter, involves the provision of raw electronic components, circuit boards, and specialized parts for prime contractors supporting DLA supply contracts. The scope includes delivering high-reliability integrated circuits, capacitors, resistors, and RF components that meet strict military specifications, with all items undergoing quality assurance and testing before being delivered as component kits to the manufacturer. Managed by the Department of Defense under the ASC Supplier Oper AE and AF Div, the contract requires strict sourcing compliance with the DFARS 252.225-7001 Buy American Act. The performance location is based in Tracy, California, and the opportunity falls under NAICS code 334418. The response deadline for this requirement is September 23, 2026.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 20 hours ago

DEADLINE

Manufacturing and Supply of Receiver-Transmitter SubassemblyThis subcontract involves the manufacturing and supply of the Receiver-Transmitter Subassembly, identified by NSN 5895-01-585-8166, for prime contractors supporting DLA supply contracts. The selected provider must fabricate and assemble the units in accordance with the DLA Master List of Technical and Quality Requirements, ensuring all items are marked and packaged according to MIL-STD-129 and MIL-STD-2073-1E standards. Delivery of the completed subassemblies is required FOB Origin. The contract is issued by the Department of Defense under the ASC Supplier OE and AF Division, with a place of performance located in Tracy, California. Compliance with the Buy American Act and a CMMC Level 2 Self-Assessment are mandatory requirements for the provider. The solicitation was posted on September 15, 2026, with a response deadline of September 23, 2026, falling under NAICS code 334220.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 20 hours ago

DEADLINE

Aerospace Coating and Surface FinishingThis subcontract for Aerospace Coating and Surface Finishing, issued by the Department of Defense under the ASC Supplier OE and AF Division, involves providing specialized surface treatments, anodizing, and plating for aircraft part contracts. The contractor is responsible for applying aerospace-grade coatings using plating equipment and anodizing tanks to ensure coolant compatibility and corrosion resistance. A critical component of the work includes the identification of hazardous materials in accordance with DLA Master List requirements and Federal Standard No. 313 to deliver finished and coated housing assemblies. The opportunity is categorized under NAICS code 332813 and will be performed in Tracy, California. Interested parties must respond by the deadline of September 23, 2026, following the posting date of September 15, 2026.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 20 hours ago

DEADLINE

Precision Machining of Coolant Cylinder HousingThis subcontract involves the precision machining, milling, and turning of coolant cylinder housing assembly components for prime contractors supporting DLA aircraft part contracts. The work requires the use of CNC mills, lathes, and CMM tools to process aerospace-grade alloys to exact precision tolerances, adhering to NSN 1450016066245 and the DLA Master List of Technical and Quality Requirements. The project is managed under the Department of Defense through the ASC Supplier OE and AF Division, with performance located in Tracy, California. All operations must comply with DFARS 252.225-7001 regulations. The final deliverables consist of machined housing components and sub-assemblies under NAICS code 332710.

POSTED

about 20 hours ago

DEADLINE

Supply of Specialized Connectors and Wiring for W572 AssemblyThis subcontract, managed by the Department of Defense ASC Supplier Oper AE and AF Div, involves the supply of aerospace-grade wiring and specialized connectors required for W572 Cable Assembly delivery under DLA supply contracts. The provider is responsible for sourcing materials that meet strict W572 specifications and must provide Certificates of Conformance to satisfy quality and SAR requirements. Key operational requirements include maintaining approved vendor status for technical data components and ensuring full DLA material traceability for all raw materials and components delivered. The performance of this contract is centered in New Cumberland, Pennsylvania, under NAICS code 423610, with a response deadline of September 23, 2026.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 20 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS