Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

AIRCRAFT DOOR

Awarded

SPRTA1-26-C-0154Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Department of Defense, through the Ok DLA Aviation At Oklahoma City office, has issued an award notice for contract SPRTA1-26-C-0154 regarding the procurement of aircraft doors. This contract falls under NAICS code 336413 and was posted on September 1, 2026. The place of performance for this contract is located in Clearfield, Utah. Michael Hannan serves as the primary point of contact for this award, which is managed out of Tinker AFB in Oklahoma.

General Info

DoD contract SPRTA1-26-C-0154 for aircraft doors in Clearfield, Utah, managed by Tinker AFB.

Agency

Department Of Defense → Ok DLA Aviation At Oklahoma City

Contract Value

$2,427,535

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment Manufacturing

Place of Performance

Clearfield, UT, 84016, USA

Set-Aside

NONE

Awardee

MERRILL CORPORATION

Award Issued Date

09/01/2026, 12:00:00 AM UTC

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseAwarded

PostedSep 1

Award Notice

AwardedSep 1

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Ok DLA Aviation At Oklahoma City

Contacts1 person available

OfficeTINKER AFB, OK, 73145-3070, USA

Organization / AgencyDepartment Of Defense → Ok DLA Aviation At Oklahoma City

Office AddressTINKER AFB, OK, 73145-3070, USA

Contacts

Michael Hannan

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

Awarded SPRTA1-26-C-0154.

Similar Contracts

Same NAICS industry code

Supply of Spacer, Sleeve (NSN 5365-01-034-2519)This subcontract, set aside for total small businesses under NAICS code 336413, involves the manufacture and delivery of 124,000 sleeve spacers, identified as NSN 5365-01-034-2519, for the Defense Logistics Agency Weapons Support ASC. The selected provider will supply these units to DLA Depots, ensuring all items are produced and delivered according to strict military and industry standards. Technical requirements include sampling per MIL-STD-1916 or ASQ H1331, packaging according to ASTM D3951 and RP001, and marking and labeling in compliance with MIL-STD-129. Additionally, the contractor must maintain CMMC Level 1 certification and adhere to all ITAR and EAR export control regulations to ensure the security and legality of the supply chain.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

Antenna-430 ADF Repair and Overhaul ServicesThis subcontract involves providing repair and overhaul services for the Antenna-430 ADF, A1, supporting prime contractors on projects for the Department of Defense Navsup Weapon Systems Support. The scope of work includes the complete teardown, evaluation, and modification of units, where defective components are identified and replaced based on approved repair manual limits. All work must be performed using specialized avionics testing equipment and must strictly adhere to IPC/EIAJ-STD-001C soldering standards to ensure units are delivered in Ready for Issue condition. The opportunity is categorized under NAICS code 336413 and was posted on October 20, 2026, with a response deadline of November 19, 2026. This technical engagement focuses on maintaining critical aviation components to meet rigorous military specifications and operational readiness requirements.

Navsup Weapon Systems Support

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Aircraft Wheel Component SupplyThis subcontract, titled Aircraft Wheel Component Supply, involves providing replacement components, seals, and hardware to prime contractors supporting NAVSUP Weapon Systems Support aircraft wheel overhaul projects. The scope specifically focuses on delivering certified aircraft-grade replacement parts and aviation-grade alloys that meet approved repair manual specifications for NSN 1630-14-597-7780. Managed under the Department of Defense, the contract requires strict adherence to the Buy American Act and Trade Agreements certifications. Additionally, the supplier is responsible for providing Material Safety Data Sheets for any hazardous materials delivered. The solicitation was posted on October 20, 2026, with a response deadline of November 19, 2026, falling under NAICS code 336413.

Navsup Weapon Systems Support

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Aircraft Wheel Half Repair and Overhaul ServicesThis subcontract for Aircraft Wheel Half Repair and Overhaul Services supports NAVSUP Weapon Systems Support projects within the Department of Defense. The scope of work involves the comprehensive teardown, evaluation, repair, and overhaul of aircraft wheel halves under NSN 1630-14-597-7780. The selected provider will be responsible for disassembling units, cleaning and inspecting parts according to approved manuals, replacing defective components, and reassembling the units using specialized fixtures, jigs, and test equipment. All deliverables must be provided in Ready for Issue condition and must strictly comply with MIL-STD-130 and MIL-STD-129 standards. This opportunity falls under NAICS code 336413, with a response deadline set for November 19, 2026.

Navsup Weapon Systems Support

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Flight Model Solar Array Wings SupplyThis subcontract involves the supply of flight-ready, qualified solar panel sets for prime contractors working on NASA/NSSC TERP RAPTOR 12U CubeSat projects. The selected provider is responsible for manufacturing solar array wings that adhere to strict space-flight specifications, utilizing space-grade solar cells, flight-qualified substrates, and deployment mechanisms specifically designed for the 12U CubeSat standard. All deliverables must meet the rigorous acceptance and verification standards established by the NASA Goddard Space Flight Center. The final requirement is the delivery of a complete set of flight-ready solar array wings, with performance taking place in Greenbelt, Maryland.

National Aeronautics And Space Administration

POSTED

about 8 hours ago

DEADLINE

Component Evaluation and InspectionThis subcontract, titled Component Evaluation and Inspection, is issued by the Navsup Weapon Systems Support under the Department of Defense. The project involves performing technical evaluations and inspections of spoiler assemblies for prime contractors working on Department of the Navy aerospace projects. The primary objective is to identify structural cracks, corrosion, or fatigue through the application of Non-Destructive Testing methods, specifically X-ray, Ultrasonic, and Dye Penetrant techniques. Qualified providers must hold ASNT or equivalent aerospace inspection certifications to ensure technical compliance. The final deliverable for this engagement is a detailed evaluation report that includes specific recommended repair actions. The solicitation was posted on October 20, 2026, with a response deadline of November 19, 2026, and falls under NAICS code 336413.

Navsup Weapon Systems Support

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Spoiler Assembly Component SupplyThis subcontract, titled Spoiler Assembly Component Supply, is issued by Navsup Weapon Systems Support under the Department of Defense. The agreement focuses on the procurement of aerospace-grade replacement parts, fasteners, and sub-components necessary for the repair of NSN 1680-01-650-9016. The supplier is responsible for sourcing OEM or approved equivalent parts that match Reference Number 81205 113A4600-406 to support prime contractors on Department of the Navy aerospace repair projects. To ensure regulatory and origin compliance, the provider must furnish Buy American and Trade Agreements certifications. The contract falls under NAICS code 336413, with a posting date of October 20, 2026, and a response deadline of November 19, 2026.

Navsup Weapon Systems Support

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Spoiler Assembly Teardown and RepairThis subcontract, managed by Navsup Weapon Systems Support for the Department of Defense, involves the teardown, evaluation, and repair of NRP Spoiler Assemblies (NSN 1680-01-650-9016) for Department of the Navy aerospace projects. The selected contractor will be responsible for disassembling the units, conducting technical evaluations for wear and damage, and performing necessary repairs or modifications in strict accordance with OEM or military specifications. The work requires the use of precision measuring instruments and aerospace-grade tooling to ensure the delivery of certified, serviceable assemblies. Additionally, the contractor must possess CAV RP reporting capabilities to meet the administrative requirements of the project. The solicitation was posted on October 20, 2026, with a response deadline of November 19, 2026, under NAICS code 336413.

Navsup Weapon Systems Support

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Aircraft Skin Component Supplier (NSN 1560-01-723-6222)This subcontract involves the supply of aircraft skin components for prime contractors supporting US Navy NAVSUP Weapon Systems Support projects. The selected supplier is responsible for manufacturing or sourcing parts that strictly adhere to NSN 1RD 1560-01-723-6222 QF specifications. All deliverables must be packaged according to MIL-STD-2073 and marked in accordance with MIL-STD-129, with final delivery directed to shipping point W25G1U. To ensure quality and precision, the contractor must maintain ISO 9001 or SAE AS9100 certification. Additionally, all equipment used in the process must be calibrated to NCSL Z540.3 or ISO 10012 standards. This opportunity falls under NAICS code 336413 and requires responses to be submitted by November 19, 2026.

Navsup Weapon Systems Support

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Supply of Attitude Indicators (NSN 6610-01-432-3229)This subcontract, issued by the Department of Defense through the Pa DLA Aviation At Philadelphia, involves the supply of Attitude Indicators under NSN 6610-01-432-3229 for NAVAIR aviation component projects. The selected provider is responsible for manufacturing or procuring units that strictly adhere to TDP Version 003, ensuring that all hardware, software, and firmware are fully aligned with the established equipment baseline. The contractor must ensure all units are marked according to MIL-STD-130 and packaged in compliance with MIL-STD-2073. To qualify, the provider must maintain ISO 9001 certification and demonstrate compliance with DFARS 252.204-7012. The final deliverable consists of the physical indicator units, fully marked and packaged for delivery.

Pa DLA Aviation At Philadelphia

POSTED

about 8 hours ago

DEADLINE

Fuel Relief Valve Teardown and RepairThis subcontract with Navsup Weapon Systems Support involves the teardown, evaluation, repair, and modification of Fuel Relief Valves under NSN 7RH 2915-01-201-6004 EK. The scope of work includes conducting wear analysis, implementing approved repair procedures, and performing necessary environmental and quality conformance testing to deliver a fully certified, repaired valve for US Navy aviation projects. The contractor must maintain ISO 9001 or SAE AS9100 certification and utilize measuring and test equipment calibrated to NCSL Z540.3 or ISO 10012 standards. This opportunity falls under NAICS code 336413, with a response deadline set for November 19, 2026.

Navsup Weapon Systems Support

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Aviation Component Parts SupplierThis subcontract, managed by Navsup Weapon Systems Support under the Department of Defense, involves the supply of replacement parts, seals, and hardware for Air Pressure Regulators, specifically part number 166001039791. These components are intended for prime contractors working on Department of the Navy aviation projects. The supplier is required to provide OEM or approved equivalent aviation-grade seals and valves, ensuring all materials meet strict quality and origin standards. Key deliverables include the physical parts along with necessary quality certifications in compliance with Trade Agreements and hazardous materials modal regulations. The opportunity was posted on October 20, 2026, with a response deadline of November 20, 2026. The contract falls under NAICS code 336413, focusing on the specialized procurement of aviation component parts.

Navsup Weapon Systems Support

POSTED

about 8 hours ago

DEADLINE

in about 1 month

More opportunities from Department Of Defense → Ok DLA Aviation At Oklahoma City

Same awarding agency

Non-Destructive Testing (NDT) and Quality Validation

Testing Laboratories and Services

POSTED

about 8 hours ago

DEADLINE

Aerospace Raw Material Supply (Specialty Alloys)

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 8 hours ago

DEADLINE

Specialized Aerospace Finishing and Surface Treatment

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 8 hours ago

DEADLINE

Precision Machining for F-118 Valve Assembly Components

POSTED

about 8 hours ago

DEADLINE

PWB Inspection and Certification TestingThe PWB Inspection and Certification Testing subcontract involves providing independent inspection and testing services for prime contractors on Department of the Air Force projects. The primary objective is to ensure that printed wiring boards meet strict flight safety and performance specifications through functional testing and quality inspections. These activities are conducted against the Engineering Data List using precision electronic testing equipment to maintain compliance with KC-46 platform Qualification Requirements. Managed by the Department of Defense through the Ok DLA Aviation At Oklahoma City, the contract requires the delivery of certified test reports and inspection stamps. The opportunity is categorized under NAICS code 541380, with a response deadline set for November 20, 2026.

Testing Laboratories and Services

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Aviation-Grade Electronic Component SupplyThis subcontract, managed by the Department of Defense through the Ok DLA Aviation At Oklahoma City, focuses on the procurement and supply of raw materials and specialized electronic components. The primary objective is to support prime contractors on Department of the Air Force projects specifically for the manufacture of PWB 285T0458-203. The scope of work includes sourcing long-lead time components and actively managing Diminishing Manufacturing Sources and Material Shortages to ensure production continuity. To maintain strict quality standards, the provider must supply certificates of conformance for all aviation-grade materials and is responsible for delivering completed component kits directly to the fabricator. This effort falls under NAICS code 423610, with a response deadline set for November 20, 2026.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Printed Wiring Board Fabrication and AssemblyThis subcontract involves the fabrication and assembly of three Printed Wiring Boards, specifically part number 285T0458-203, for Department of the Air Force projects managed by the Ok DLA Aviation At Oklahoma City. The selected contractor is responsible for the new manufacture, procurement, and integration of all component parts in strict accordance with the Engineering Data List. To ensure quality and compliance, the contractor must adhere to MQR-PSD-1 standards and possess the capability to support a Source Approval Request package. The project is categorized under NAICS code 334418, with a response deadline set for November 20, 2026.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Fd203062700424 (2995-01-290-1428J)

Solicitation # FD20302700424

The 421st Supply Chain Management Squadron at Tinker Air Force Base is conducting market research via a Sources Sought Synopsis to identify potential manufacturing sources for a Valve Assembly for the F-118 engine, identified by NSN 2995-01-290-1428JU. This effort is intended to determine if the requirement can be competitive or a Small Business Set-Aside under NAICS code 336412. The government is seeking interested parties capable of providing all labor, materials, facilities, and equipment necessary for the manufacture, testing, preservation, packaging, and delivery of completely serviceable units, including the management of supply chains, long-lead parts procurement, and obsolescence issues. To be considered, potential sources must submit a Source Approval Request (SAR) package and a Company Profile to the Oklahoma City Small Business Office. Qualification requires that the company has manufactured the subject or a similar item within the past 36 months for the Department of Defense or the Original Equipment Manufacturer. Essential requirements include a valid Quality Assurance Certificate such as ISO 9001, AS9100, or NATO AQAP-2070, and the ability to provide detailed Process Operation Sheets and Inspection Method Sheets. Interested businesses of all sizes and socioeconomic categories are encouraged to respond with their company details, CAGE code, and documentation of their capabilities. This notice is for planning purposes only; no solicitation is currently available, and no funds have been allocated at this time.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 8 hours ago

DEADLINE

PRINTED WIRING BOARD_End_Item_KC-46_NSN_5998016525319KT _PN_285T0458-203

Solicitation # FD20302700261

The Department of the Air Force, through the 422nd Supply Chain Management Squadron at Tinker Air Force Base, is conducting market research via a Sources Sought Synopsis to identify potential sources for the procurement of Printed Wiring Boards for the KC-46 platform. The specific requirement involves the new manufacture of three units of part number 285T0458-203, identified by NSN 5998-01-652-5319KT. This effort is not a formal solicitation or request for proposal, and no funds are currently available for the information solicited. The government is utilizing this process to determine the best acquisition strategy and to evaluate if the requirement can be competitive or established as a Small Business Set-Aside. Qualified sources must be capable of providing all labor, materials, and equipment necessary for the manufacture, inspection, testing, packaging, and shipping of the boards. Potential contractors may also be responsible for supply chain management, logistics planning, and nonrecurring engineering costs. Interested parties must provide comprehensive business information, including their CAGE code, UEI, and socioeconomic status under NAICS code 336413. Additionally, any source wishing to be qualified is required to complete a Source Approval Request package and submit it electronically via DoD SAFE. Performance will take place at Tinker AFB, Oklahoma.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Igniter, Spark Gas T (3D)

Solicitation # SPRTA127R0103

The Department of Defense, through DLA Aviation at Oklahoma City, is issuing a pre-solicitation for the procurement of Gas Turbine Spark Igniters (NSN 2925015034385RV, PN 9045600-1) for TF33 engines. These steel components are designed to provide the high voltage and high energy pulses necessary to ignite fuel in the combustion section for engine starting. The requirement is for 159 units, with a minimum guarantee of 40 and a maximum of 239. Deliveries are scheduled at a rate of 10 units per month starting on or before July 31, 2028, with the final destination being Tinker AFB, Oklahoma. Solicitation number SPRTA127R0103 is expected to be issued on September 28, 2026, with a response deadline of October 13, 2026. This procurement may be conducted as a limited source procurement under FAR 6.302, with Unison Industries, LLC identified as a qualified source. Award decisions will be based on a combination of price and past performance, with price serving as a significant factor. This is not a set-aside procurement, and qualification requirements are in effect for the items.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 8 hours ago

DEADLINE

in about 1 month

TEMPERATURE INDICATOR

Solicitation # SPRTA1-27-R-0081

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

Specialized Freight and Transportation Services (OCONUS/Export)This subcontract for Specialized Freight and Transportation Services supports the Department of Defense through the Ok DLA Aviation At Oklahoma City. The scope of work involves the transportation, marking, and shipping of aerospace components for prime contractors on DLA Weapons Support projects. Key operational requirements include managing shipments via PIEE and coordinating with DCMA for Foreign Military Sales, OCONUS, Export movements, and FOB Origin logistics. The contractor is responsible for ensuring all freight classification and marking adhere to FAR 52.247-29 and FAR 52.247-53 standards. All components must be delivered with complete DOD shipping documentation. This opportunity falls under NAICS code 488510, with a response deadline set for November 18, 2026.

Freight Transportation Arrangement

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS