Aircraft Elevator Stanchion Material

THIS REQUEST FOR INFORMATION (RFI) NOTICE is being issued by the Department of the Navy, Naval Surface Warfare Center, Philadelphia Division (NSWCPD). NSWCPD has a requirement for Aircraft Elevator Stanchion Material. NSWCPD is requesting information from any and all interested sources in order to make an informed determination regarding procurement strategy. NSWCPD is seeking a manufacturer able to produce 3x styles of drive units. Drive units to include an internal 440VAC electric motor as well as self-locking internal worm gears resulting in output shafting with the following load specifications: Unit A: Output torque of 4,500 in-lbs.; output shaft speed of 35.5 RPM Unit B: Output torque of 14,400 in-lbs.; output shaft speed of 25.9 RPM Unit C: Output torque of 7,200 in-lbs.; output shaft speed of 17.6 RPM The units must fit within the following size envelopes (Height x Width x Depth): Unit A: 35"x19"x19" Unit B: 35"x19"x19" Unit C: 39"x21.5"x21.75" All external surfaces must be weather resistant and constructed from 316 stainless steel. Drive units must have the ability to be operated manually and must include a 120VAC proximity switch, which actuates/deactivates when manual access cover is removed. Drive units must be Grade A shock (MIL-S-901) and vibration (MIL-STD-167) qualified. It is also acceptable to have only 1x of the units qualified if the other 2x are near identical designs and could be expected to be granted qualifications without further testing. Manufacturer must have the ability to produce 10x units (as a combination of Unit A, B, and C described above) in a 9-month period. Manufacturer must have the ability to produce 20x units in a 1-year period. Manufacturer must have the ability to refurbish damaged units and certify them to full operational capability. Manufacturer must provide warranties for new and refurbished drive units. This IS NOT a request for proposals, quotations, or bids. Responses to this request will not be returned. Not responding to this sources sought does not preclude participation in any future and potential solicitation. It is the intent of NSWCPD to use this information for market research purposes only. The survey is being conducted to determine if there are adequate large and/or small business contractors for providing the work described above. The Government WILL NOT pay for the provision of any information, nor will it compensate any respondents for the development of any such information. This RFI Notice is issued solely for conducting market research in accordance with FAR Part 10 and gathering information for planning purposes. If a formal solicitation is released, it will be via Federal Business Opportunities (fbo.gov). SUBMISSION OF RESPONSES: Respondents shall provide capability statements with specific information regarding their ability to provide the required supplies/services to meet the NSWCPD's needs as detailed above. Responding statements are not to exceed ten (10) pages in length. Responses shall be in electronic format (Microsoft Word or PDF preferred). A cover page for the response shall be included. The cover page shall include the company name, address, CAGE Code, Business Size Status for North American Industry Classification System (NAICS) code, and points of contact (names, email, and telephone numbers) at a minimum. The cover page is not considered in the total page count. NSWCPD will only accept unclassified, electronic submissions. Capability Statements must address, at a minimum the following: Section 1: Introduction. Identify the Sources Sought Number and Title Section 2: Corporate Description. - Name of Company and address - Ownership, including whether: Small, Small Disadvantaged Business (SDB), 8(a), Women-Owned Small Business (WOSB), HUBZone, or Service Disabled Veteran-Owned Small Business (SDVOSB) - Points of contact, including: Name, title, phone, and e-mail address - CAGE Code and DUNS Number (1) A complete description of the firm's capabilities, related experience, facilities, techniques, or unique combination of factors that would directly relate to the Government's objectives as stated above. Section 2. Past/Current Performance. Provide one (1) example of prior/current corporate experience performing efforts of similar size and scope within the last three years, including contract number, organization supported, indication of whether as a prime or subcontractor, contract values, Government point of contact with current telephone number, and a brief description of how the referenced contract relates to the work described in the draft requirements document. Responses shall be sent to Contract Specialist Ronald Palau-Hernandez at Ronald.Palau-Hernand@navy.mil with the subject line "RFI N64498-19-RP-031 Aircraft Elevator Stanchion Material." All responses must be submitted by no later than 4:00 PM on September 27, 2019.