Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Aircraft Filter Warning Indicator Manufacturing and Assembly

Active

Federal

Response Deadline08/03/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the manufacture, configuration control, and assembly of a critical aircraft engine filter warning indicator that must meet stringent DLA, FAA, and military standards. The work involves precise engineering and production processes to ensure the device reliably monitors engine filter status and provides accurate warnings under demanding operational conditions. Configuration control is essential throughout the lifecycle to maintain consistency, traceability, and compliance with approved technical specifications and quality assurance protocols. Performance of the contract is designated for New Cumberland, Pennsylvania, with a response deadline of August 3, 2026, and the solicitation was posted on July 26, 2026. This is a subcontract under the Department of Defense, managed by the ASC SUPPLIER OPER AE AND AF DIV, and falls under NAICS code 336390, which covers other transportation equipment manufacturing. The requirement is specific to a mission-critical aviation component, and bidders must demonstrate capability in aerospace-grade manufacturing, adherence to federal aviation and defense regulations, and experience in controlled assembly environments.

General Info

Manufacture and assemble critical aircraft engine filter warning indicator per DLA, FAA, and military standards in New Cumberland, PA.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

336390 - Other Motor Vehicle Parts ManufacturingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 26

subcontract

Response DeadlineAug 3

Submission deadline

Response Deadline

08/03/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture, configuration control, and assembly of a critical aircraft engine filter warning indicator compliant with DLA, FAA, and military standards.

Similar Contracts

Same NAICS industry code

Torque Tube (Brake System Component) SupplyThe contract pertains to the manufacture or supply of a torque tube component designed specifically for military brake systems, requiring strict adherence to military-quality standards to ensure performance and reliability in demanding operational environments. The work is classified as a subcontract under NAICS code 336390, indicating it falls within the aerospace product and parts manufacturing sector, and the place of performance is designated as Tracy, California, with a zip code of 95304-5000. The solicitation was posted on July 26, 2026, and responses are due by August 3, 2026, with the contracting activity managed by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense. All deliverables must meet or exceed applicable military specifications without deviation, and compliance with quality assurance protocols is mandatory for approval and payment.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Supply of Cable Retractor (NSN 5340012694423)The contract is for the procurement and delivery of 750 units of a military-spec cable retractor identified by NSN 5340012694423, intended for defense applications. The requirement is issued as a subcontract under a Service-Disabled Veteran-Owned Small Business Set-Aside, with the NAICS code 336390 indicating the industry classification for other transportation equipment manufacturing. The place of performance is specified as New Cumberland, Pennsylvania, with a ZIP code of 17070-5002, and the contracting activity is managed by the LAND SUPPLY CHAIN under the Department of Defense. The solicitation was posted on July 26, 2026, with responses due by August 6, 2026, creating a narrow two-week window for bidders to submit proposals. While the point of contact and detailed agency office address are not provided, the official link to the solicitation is accessible via the DIBBS system for further information and submission requirements.

LAND SUPPLY CHAIN

POSTED

DEADLINE

STARTER, ENGINE, HANDThe contract is for the procurement of 485 units of a starter, engine, hand, identified by NSN 2990013230307, under solicitation SPE7L5-26-T-4624, issued as a Women-Owned Small Business Set-Aside with NAICS code 336390. The item is classified as a commercial off-the-shelf product with adequate catalog data available for evaluation of alternatives, and it is designated as a critical application item. Delivery is required FOB origin with a 178-day ADO lead time, with a needed ship date of February 1, 2027, and a final delivery deadline of June 16, 2027. The contract specifies a total price of $485.00, implying a unit price of $1.00, despite a documented inconsistency listing $485.000 as the unit price. All items must be packaged and preserved per MIL-STD-2073-1E, with specific preservation methods including cold/dry conditions (Method 31), and shipped with no internal cushioning material required. Marking must comply with MIL-STD-129, including standardized barcoding, with no special marking required. The delivery destination is DLA District San Joaquin in Tracy, California, with invoicing mandatory through WAWF using an invoice and receiving report format. The contract incorporates stringent safety and regulatory requirements, including a prohibition on intentional use of mercury or mercury-containing compounds in the hardware, unless functionally necessary in batteries, instruments, sensors, or weapon systems and authorized by NAVSEA, with portable fluorescent lamps and instruments requiring shockproof construction and secondary containment in accordance with NAVSEA 5100-003D. Packaging and labeling must comply with hazardous material standards under 29 CFR 1910.1200, requiring submission of Safety Data Sheets prior to award and continuous updates if product composition changes. Items containing radioactive material with specific activity above thresholds must be disclosed and labeled per MIL-STD-129, with notification of changes to the Contracting Officer. Technical and quality requirements referenced by 'R' or 'I' numbers are governed by the DLA Master List, and the contract includes FAR and DFARS clauses covering contractor responsibility, anti-trafficking, employment eligibility, sustainable sourcing, packaging, changes, subcontracting, safeguarding

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

SWITCH, LIQUID LEVELThe contract specifies the procurement of a liquid level switch, part number 3876333-3 manufactured by Honeywell International Inc., with NSN 2915-01-654-8306, quantity of one unit, under solicitation SPE4A7-26-T-594W. Delivery is required within 166 days to the DLA Distribution facility in New Cumberland, PA, with FOB origin terms and zero variance allowed on quantity. Inspection and acceptance occur at the destination. The item is designated as a critical application, subject to stringent quality and traceability requirements including compliance with MIL-STD-1916 or ASQ H1331 sampling standards, zero non-conformances in inspection unless otherwise specified, and adherence to MIL-STD-2073-1E packaging and MIL-STD-129 marking standards. Supply chain traceability documentation must be retained as per DLA Procurement Note C03, and the item requires Item Unique Identification (IUID) per MIL-STD-130 and DFARS 252.211-7003. The contractor must also comply with CMMC Level 2 self-assessment, FAA airworthiness approval, and FAA bare item marking requirements. Packaging and preservation follow DLA-specific directives, with special marking code 00 indicating no special marking. The contract is a total small business set-aside under NAICS code 336390, with a response deadline of August 3, 2026, and an original delivery requirement of August 27, 2026, though the need ship date is January 17, 2027. All technical and quality requirements referenced are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date as applicable.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

MUFFLER, EXHAUSTThe contract is for the procurement of one muffler, exhaust unit with NSN 2990-01-417-9342 and part number 86192M supplied by CUMMINS FILTRATION INC., under solicitation SPE7L1-26-T-876R. The item must be delivered FOB destination within 20 days of contract award, with no tolerance for quantity variance, and inspection and acceptance occur upon delivery at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 standards, including specific packaging methods, materials, and unit containment requirements, with palletization governed by DLA packaging protocols. The delivery address is USS SAN ANTONIO LPD 17, FPO AE 09587, and shipment must follow DLAD procedural notes C19 and C20. Mercury and mercury-containing compounds are strictly prohibited in the hardware unless explicitly exempted for functional components such as certain batteries, lamps, sensors, or weapons systems, in which case secondary containment and shock-proofing are mandatory per NAVSEA 5100-003D. All technical and quality requirements referenced by R or I numbers are incorporated by direct linkage to the DLA Master List of Technical and Quality Requirements, with revision control tied to the solicitation issue date or amendment date, depending on acquisition size. The contract is issued under the Department of Defense’s Land Supply Chain, with Kristina Derry as the primary point of contact, and procurement is governed by federal solicitation rules under NAICS code 336390.

LAND SUPPLY CHAIN

POSTED

DEADLINE

COMPUTER, SPECIAL PUThe contract is for one unit of a special-purpose computer identified by NSN 2541-01-694-4944, issued under solicitation SPE7L3-26-T-133X with a response deadline of August 6, 2026, and a required delivery within five days after award. The item falls under NAICS code 336390 and is procured by the Department of Defense through the Land Supplier Ops Vehicle Support office. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with MIL-DTL-117, Type II, Class C, Style 1, using a medium-duty, waterproof, greaseproof, and opaque bag to protect against UV deterioration, applicable to direct vendor delivery, foreign military sales, and stock shipments. The item is exempt from the First Destination Packaging Program and is not eligible for standard commercial packaging. The use of class I ozone-depleting chemicals is strictly prohibited, and any substitutions require prior approval unless explicitly permitted by the specification. All supplied items must be asbestos-free; any alternative materials must be approved per Clause L30 and Provision 4 conditions. Point of contact for inquiries is Kayla Buchanan, with direct email and phone provided for communication.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

BOOT, VEHICULAR COMPThis contract pertains to the procurement of two vehicular compound boots, identified by NSN 2530012727444 and part number 1681296C91, under solicitation SPE7L3-26-T-134K. The item must be delivered within ten days to the designated military address in Drawsko Pomorskie, Poland, with delivery terms set at FOB origin and no tolerance for quantity variance. All packaging and labeling must comply with MIL-STD-129 and DLA’s Packaging Requirements for Procurement (RP001), and the materials must be packaged according to ASTM D3951 unless deemed hazardous under Fed-Std-313, in which case TQ requirement IP025 applies. The DLA Master List of Technical and Quality Requirements takes precedence over any other standards, and ozone-depleting chemicals are strictly prohibited. The boots must be marked with the specified military routing identifier and shipped via the fastest traceable method, excluding parcel post. Acceptance and inspection occur at the destination, and the unit of issue is each (EA) with a total price of $2.00 per unit. The requirement is associated with a project code, government tracking identifiers, and a delivery deadline of July 22, 2026.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

FILTER BODY, FLUIDThis contract under solicitation number SPE7LX-26-U-9020 is a Small Business Set-Aside for the procurement of a FILTER BODY, FLUID with NSN 2910-01-581-6417, issued by the Defense Logistics Agency under the Strategic Acquisition Program Directorate. The contract is structured as an Indefinite-Delivery Contract (IDC) with a maximum value of $350,000 and no guaranteed minimum quantity, though an estimated annual quantity of 174 units is noted. Delivery is required FOB Origin within 74 days after receipt of a delivery order, with all shipments destined for CONUS locations under DLA DIRECT, CONUS coverage. The unit of issue is each (EA), and no quantity variance is permitted. Inspection and acceptance occur at the destination point by the Government, and compliance with the DLA Master List of Technical and Quality Requirements takes precedence over all other standards, including ASTM D3951 for packaging and MIL-STD-129 for marking, labeling, and barcoding. Packaging must also comply with RP001 for palletization and must be labeled in accordance with DoD requirements, including U/I and QUP as specified in the contract. The solicitation mandates full compliance with a broad array of Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement clauses covering cybersecurity, information security, hazardous materials, whistleblower protections, subcontracting, and ethics. Contractors must implement NIST SP 800-171 controls and report cyber incidents under 252.204-7012, and are prohibited from using covered defense telecommunications equipment under 252.204-7018. Hazardous materials require labeling per 29 CFR 1910.1200 and DFARS 252.223-7001, with submission of Material Safety Data Sheets prior to award. Offerors must provide a Valid Unique Entity ID and CAGE code, and certify their small business status under NAICS code 336390. All proposals must be submitted electronically via the DIBBS portal by August 10, 2026, with invoicing exclusively through Wide Area WorkFlow. Payment is governed by standard DoD accounting procedures using DoDAAC codes, and the basis of award is expected to be Lowest Price Technically Acceptable. There are no attachments required, and

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

FILTER, FLUIDThis contract pertains to the procurement of fluid filters with NSN 2940-01-559-1820 and part number 01542705, managed under solicitation SPE7LX-26-U-9022 for a total quantity of 228 units, each to be delivered within 62 days under FOB origin terms. The purchase is subject to a 0% variance in quantity, with inspection and acceptance occurring at the destination point. Packaging must conform to ASTM D3951 and MIL-STD-129 markings and labeling, with all packaging requirements subordinate to the DLA Master List of Technical and Quality Requirements, which take priority. Unit of issue is each (EA), and palletization must align with DLA Packaging Requirements for Procurement (RP001). The contract is structured as a direct, CONUS delivery under DLA authority and falls under a Total Small Business Set-Aside, with the NAICS code 336390. The estimated quantity is non-binding, and the government is not obligated to purchase the full amount. The point of contact for inquiries is Theodore Misiolek, and responses were due by August 10, 2026, with the solicitation posted on July 26, 2026.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

PIPE, EXHAUSTThe contract pertains to the procurement of 14 units of PIPE, EXHAUST with NSN 2990-01-414-4072 under solicitation SPE7L5-26-T-4628, which is a Total Small Business Set-Aside as defined under FAR 19.5, targeting NAICS code 336390. The delivery must be completed within 158 days after order, and the solicitation was posted on July 26, 2026, with responses due by August 6, 2026. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with the applicable revision based on the solicitation issue date or award date depending on acquisition size. Cybersecurity requirements mandate CMMC Level 2 certification for third-party assessors, and the item contains covered defense information requiring compliance with DFARS 252.225-7048. Technical data associated with this item is subject to export controls under ITAR or EAR, and access is restricted to contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have received explicit approval from DLA to handle such data. Packaging must conform to DLA standards, and the place of performance is specified as Tracy, California, 95304-5000, with Mary Rowley designated as the primary point of contact for inquiries.

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

INDICATOR, FILTER WARNIThis contract specifies the procurement of an Indicator, Filter Warning for aircraft engine applications, with a focus on strict technical and quality compliance. The item, identified by NSN 2945-01-653-4818 and part number 7586631, is classified as a Critical Application Item and must meet all referenced requirements from the DLA Master List of Technical and Quality Requirements, including configuration change management, supply chain traceability documentation per DLA Directive Procurement Note C03, and FAA-specific marking and airworthiness approval standards. Packaging and marking must conform to MIL-STD-2073-1E and MIL-STD-129, with palletization aligned to DLA Packaging Requirements, and no special marking is required. All deliveries are FOB Origin, with inspection and acceptance occurring at the destination, and a fixed quantity of two units is mandated with zero variance allowed. The delivery schedule requires fulfillment within 166 days of award, with an original required delivery date of August 27, 2026, and a needed ship date of January 17, 2027. Sampling and acceptance criteria follow MIL-STD-1916 or ASQ H1331, where critical, major, and minor attributes correspond to verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with zero non-conformances required unless otherwise stated. The contract incorporates multiple DLA Procurement Notes including L32, RP001, RP003, RQ002, RQ011, RQ046, and RQ018, all governing quality, preservation, packaging, and traceability. The item is subject to FAA airworthiness approval requirements and must be delivered to the designated DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLAD Procurement Notes C19 and C20. The solicitation was issued on July 26, 2026, with a response deadline of August 3, 2026, under contract number SPE4A7-26-T-594V.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

29--FILTER,FLUIDThe U.S. Department of Defense, through DLA Land and Maritime, is soliciting quotes for 228 fluid filters under NSN 2940015591820, with a guaranteed minimum quantity of 34 units. This procurement is conducted as a combined solicitation under the Small Business Administration Total Small Business Set-Aside program, exclusively open to qualified small businesses. The contract, if awarded, may take the form of an indefinite-delivery contract valid for one year or until aggregate orders reach $350,000, with an estimated two orders per year. All items must be shipped to various DLA depots across CONUS and OCONUS via consolidated and containerized shipping points, with delivery required within 62 days of order placement. The only approved source for this item is identified by the supplier code 61080 01542705. The solicitation, numbered SPE7LX26U9022, is posted online with no hard copies available, and all quotations must be submitted electronically by the August 10, 2026 deadline. No specifications, plans, or drawings are provided, and responsible sources are encouraged to submit quotes based on the provided data. Inquiry contact information is available through the listed buyer email, and the full solicitation document can be accessed via the SAM.gov link or the DIBBS website.

DLA Land And Maritime

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

Domestic and International Freight Logistics (Ocean & Land)The contract involves the transportation of packaged insulation blankets from origin to destination, with a requirement that all overseas shipments be conducted using U.S.-flag vessels in compliance with 10 U.S.C. § 2643. Transportation is governed by FOB origin terms, meaning the seller is responsible for delivering the goods to the named origin point, after which risk and responsibility transfer to the buyer. The scope includes both domestic and international freight logistics encompassing ocean and land modes to ensure timely and compliant movement of the materials. The solicitation is classified as a subcontract under the NAICS code 483111, which pertains to deep sea foreign transportation of freight. It was posted on July 27, 2026, with a response deadline of August 24, 2026, and is issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The place of performance and point of contact details are not specified, but the contract is accessible via the DIBBS platform for potential bidders to review terms and submit proposals.

Deep Sea Freight Transportation

POSTED

about 1 hour ago

DEADLINE

Defense-Compliant Packaging and PreservationThe contract requires the packaging and preservation of insulation blankets in full compliance with MIL-STD-2073-1E, encompassing all steps necessary for proper defense-standard handling including preservation techniques, wrapping methods, unit containment designated as D3, and labeling according to MIL-STD-129. All items must be palletized following the specifications outlined in DLA RP001 to ensure uniformity, transport readiness, and compatibility with Department of Defense logistics systems. The work must meet exacting military standards for durability, protection against environmental degradation, and traceability throughout the supply chain. This is a subcontract opportunity issued by the Department of Defense under the ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of August 24, 2026. The North American Industry Classification System code 323111 indicates the work falls under printing and related support activities, though the actual task involves specialized military packaging operations. The contract does not specify a set-aside classification or geographic performance location, and all submissions must adhere strictly to the referenced military standards without deviation to ensure full acceptance by defense logistics authorities.

Commercial Printing (except Screen and Books)

POSTED

about 1 hour ago

DEADLINE

Government Surplus Material Inspection and HandlingThe contract requires comprehensive inspection, verification of government ownership, and proper handling of surplus materials under strict quality standards, with zero non-conformances permitted. All sampling and evaluation must adhere to MIL-STD-1916 or ASQ H1331 protocols, ensuring rigorous compliance and defect-free outcomes throughout the process. The work involves confirming the legitimacy and status of surplus items prior to handling, with no tolerance for deviations from established quality controls. This subcontract is issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV and falls under the NAICS code 561990 for other support services. The solicitation was posted on July 27, 2026, with responses due by August 24, 2026. The place of performance and specific location details are not provided, but the work is tied to government surplus material management under federal oversight. The contract emphasizes accountability, adherence to military standards, and complete documentation to support government property control and disposition requirements.

All Other Support Services

POSTED

about 1 hour ago

DEADLINE

Aircraft Insulation Blanket ManufacturingThe contract seeks the manufacture of aircraft cabin insulation blankets compliant with NSN 1680-01-581-8998 and part number 724E4103-32, adhering precisely to the technical requirements established by Triumph Fabrications-St. Louis Inc and the Defense Logistics Agency. The work must meet all specified material, dimensional, and performance standards to ensure compatibility and safety in military aircraft environments. Submission deadlines are set for August 24, 2026, with the solicitation posted on July 27, 2026, indicating a timeline for qualified manufacturers to respond. This transaction is categorized as a subcontract under NAICS code 336412, signaling involvement in aerospace product and parts manufacturing. Performance is expected to support Department of Defense operations overseen by the ASC SUPPLIER OPER AE AND AF DIV, with no set-aside provisions specified, allowing open competition among eligible contractors.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 1 hour ago

DEADLINE

INSULATION BLANKET,The contract specifies the procurement of five insulation blankets, identified by NSN 1680-01-581-8998 and part number 724E4103-32, for use in aircraft applications under the DLA procurement framework. The item must be manufactured in strict conformance to the approved source, Triumph Fabrications-St. Louis Inc, and meet all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the solicitation or award date depending on acquisition size. Sampling for inspection must follow MIL-STD-1916 or ASQ H1331 with zero nonconformances required unless otherwise stated, and attributes are to be classified with verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The contract mandates origin inspection and acceptance, firm fixed pricing, and a strict 0% variance in quantity. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including specific methods for preservation, wrapping, and unit containment, with marking adhering to MIL-STD-129 and no special marking codes. The delivery deadline is 300 days after contract award, with FOB origin terms and transportation handled per DLAD procedural notes C19 and C20. The item is subject to configuration change management, engineering change proposals, and strict removal of government identification if not accepted, with all procedures bound by DLA’s authorized unit of issue and procurement standards.

Mineral Wool Manufacturing

POSTED

about 1 hour ago

DEADLINE

Packaging, Marking, and Configuration ManagementThis contract mandates strict adherence to Department of Defense packaging, marking, and configuration control standards, specifically requiring compliance with DLA R-series requirements and MIL-STD-129. All items must be properly packaged, labeled, and marked in accordance with federal military specifications, including the removal of any identifying information that could compromise operational security, and maintaining rigorous configuration control throughout the supply chain. The work is tied to a subcontract under the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV, with performance required at Tinker Air Force Base, Oklahoma, 73145-8000. The NAICS code 488490 indicates this involves other support activities for transportation, suggesting logistics and supply chain services are central to the obligation. The solicitation was posted on July 26, 2026, with responses due by August 3, 2026, and all deliverables must align precisely with government-mandated procedural and technical guidelines to ensure interoperability and accountability within the military logistics system.

Other Support Activities for Road Transportation

POSTED

DEADLINE

Radioactive Materials Notification and LabelingThe contract titled Radioactive Materials Notification and Labeling requires compliance services to identify and properly label components that contain radioactive materials in accordance with MIL-STD-129 and applicable government notification standards. The work involves ensuring accurate marking, documentation, and reporting to meet federal regulatory requirements for handling and transporting materials with radioactive content. This subcontract is aimed at supporting defense supply chain integrity by enforcing strict labeling protocols and timely notifications to authorized entities. Performance of the contract is designated for Tinker Air Force Base with a zip code of 73145-8000, and the North American Industry Classification System code is 541690, indicating it falls under other scientific and technical consulting services. The solicitation was posted on July 26, 2026, with responses due by August 3, 2026. The contracting agency is the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, and the procurement is managed via the DIBBS platform under solicitation number SPE4A726T595D. No set-aside type or point of contact details are specified, but the requirement is strictly tied to defense logistics and safety compliance.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Hazardous Materials Compliance and SDS ManagementThe contract requires comprehensive identification, labeling, and documentation of hazardous materials used in manufacturing processes, ensuring full compliance with OSHA regulations and the Defense Federal Acquisition Regulation Supplement. A critical component involves the preparation, updating, and maintenance of Safety Data Sheets for all regulated substances, with strict adherence to federal standards for accuracy, accessibility, and currency. The work is tied to operations at Tinker Air Force Base, where the contractor must support defense manufacturing activities by maintaining rigorous records and ensuring workplace safety through proper hazardous material handling protocols. This subcontract is solicited under NAICS code 541690, indicating a focus on other scientific and technical consulting services, and is issued by the Department of Defense under the ASC SUPPLIER OPER AE AND AF DIV. Responses are due by August 3, 2026, with performance anticipated at the specified location in Oklahoma. The contractor must demonstrate expertise in regulatory compliance, industrial safety practices, and documentation systems to meet the demands of a defense environment governed by stringent federal oversight. Failure to maintain accurate Safety Data Sheets or mislabeling hazardous materials could result in noncompliance penalties and operational disruptions.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Quality Inspection and Origin Testing ServicesThe contract solicits independent origin inspection and testing services to ensure compliance with Defense Logistics Agency quality standards, encompassing dimensional verification, material authentication, and functional testing of components. These services are critical for verifying the integrity and conformity of supplied items to mandated specifications, primarily supporting defense supply chain assurance. The work is to be performed at Tinker Air Force Base with a zip code of 73145-8000, and the contract is classified as a subcontract under NAICS code 541380 for other scientific and technical consulting services. The solicitation was posted on July 26, 2026, with a response deadline of August 3, 2026, and is managed by the ASC Supplier Oper AE and AF Division under the Department of Defense. All responses must meet the technical and procedural requirements outlined in the solicitation to qualify for award.

Testing Laboratories and Services

POSTED

DEADLINE

Precision Manufacturing of Pilot Chute RetainersThe contract pertains to the precision manufacture of pilot chute retainers in accordance with stringent DLA technical specifications, requiring exacting machining, forming, and assembly processes to meet military-grade standards for dimensional accuracy, material integrity, and operational performance. All work must comply with defense-specific requirements to ensure reliability under extreme conditions, with production destined for use in critical parachute systems supporting military operations. The place of performance is fixed at Tinker Air Force Base, Oklahoma, with a ZIP code of 73145-8000, indicating the primary logistics and oversight location. This is a subcontract opportunity under NAICS code 332999, categorized as miscellaneous manufacturing, with a posted date of July 26, 2026, and a response deadline of August 3, 2026. The contracting organization is the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, indicating the work is part of a larger defense supply chain initiative. There is no set-aside designation specified, and no point of contact information is provided in the data. Interested parties must submit responses through the DIBBS portal prior to the deadline to be considered for award.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

FAA Airworthiness Certification and Documentation (CDRL RQ019)The contract requires the preparation and submission of FAA airworthiness approval documentation for critical aerospace components in accordance with Contract Data Requirements List item RQ019. This subcontract is issued under the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV and is tied to a specific place of performance in New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The North American Industry Classification System code 541330 indicates the work falls under engineering services, emphasizing the technical and regulatory nature of the deliverables. The solicitation was posted on July 26, 2026, and responses are due by August 3, 2026, indicating a tight turnaround for compliance with FAA certification standards. The obligation centers entirely on delivering properly formatted, accurate, and complete documentation to secure official airworthiness approval, with no indication of set-aside status or specific point of contact provided.

Engineering Services

POSTED

DEADLINE

Quality Inspection and Sampling Services (MIL-STD-1916 / ASQ H1331)The contract requires the performance of independent quality inspection and statistical sampling services in accordance with MIL-STD-1916 or ASQ H1331 standards for destination acceptance of supplies. The work is classified as a subcontract under NAICS code 541350 and is solicited by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. The place of performance is specifically designated as New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The solicitation was posted on July 26, 2026, and responses are due by August 3, 2026, with no set-aside provisions designated. All inspection activities must adhere strictly to the specified military and industry sampling standards to ensure conformity and acceptance at the delivery point.

Building Inspection Services

POSTED

DEADLINE