Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

Aircraft Interior Lining Panel Manufacturing

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the manufacture of seven aircraft interior lining panels that must fully comply with DLA technical specifications, including strict requirements for material composition, fire resistance, weight limits, and dimensional tolerances as defined by NSN 1680015885498. These panels are critical components for military aircraft interiors and must meet rigorous performance and safety standards to ensure operational readiness and crew safety. The work is classified as a subcontract under NAICS code 336412, indicating specialized aerospace component manufacturing, and the panels are to be delivered to the designated place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 16, 2026, with a firm response deadline of July 24, 2026, leaving a limited window for qualified suppliers to submit proposals. The contracting organization is the ASC Supplier Oper AE and AF Division under the Department of Defense, which oversees procurement for specialized aviation equipment. While no set-aside provisions or point of contact details are provided, bidders must ensure full adherence to all technical and regulatory requirements outlined in the NSN and DLA specifications to be eligible for award. The contract is accessible via the DIBBS system for registered participants seeking submission guidelines and further documentation.

General Info

Manufacture seven DLA-compliant aircraft interior panels for DoD delivery to New Cumberland, PA, by July 24, 2026.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

336412 - Aircraft Engine and Engine Parts ManufacturingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Manufacture of 7 aircraft interior lining panels compliant with DLA technical specifications, including material, fire resistance, weight, and dimensional tolerances per NSN 1680015885498.

Similar Contracts

Same NAICS industry code

NAICS: 336412
New
DIBBS
Supply of Inflatable Inflation Assembly (P/N: 4220-00-920-3651)The contract calls for the supply of 110 units of a military-grade Inflatable Inflation Assembly with part number 4220-00-920-3651, requiring full compliance with the MIL-I-87108B specification. Performance must include successful completion of First Article Testing to validate conformance to technical requirements, and all units must be packaged and marked in strict accordance with military standards for identification, handling, and traceability. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, ensuring eligibility is restricted to small businesses as defined by the SBA, with the NAICS code 336412 categorizing it under Aircraft and Parts Manufacturing. The offering is managed by the Department of Defense through the CONSTRUCTION & EQUIPMENT MRO SVC I office, with a response deadline of July 24, 2026, and an posted date of July 17, 2026, indicating a seven-day window for submissions. All work must be performed in accordance with federal procurement guidelines, and the procurement is administered through the DIBBS platform.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 14 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336412
New
DIBBS
SHAFT ASSEMBLY, FUELThe contract pertains to the procurement of 50 units of the SHAFT ASSEMBLY, FUEL with NSN 2840010141882 and part number 3240348, manufactured by HONEYWELL INTERNATIONAL INC. Delivery is required within 200 days from the award date, with FOB origin terms and inspection and acceptance occurring at the destination. The items must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, and packaging must adhere to MIL-STD-2073-1E and DLA Packaging Requirements, including MIL-STD-129 marking with no special markings. Sampling for quality verification follows MIL-STD-1916 or equivalent zero-based plans, with critical attributes requiring a zero non-conformance acceptance level unless otherwise stated. The product is designated as a Critical Application Item and requires compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment. Configuration changes must follow Engineering Change Proposal procedures, and government identification must be removed from non-accepted supplies. All shipments must be palletized per DLA guidelines and addressed to DLA Distribution Cherry Point in North Carolina. The contract is part of a federal solicitation issued under SPE4A5-26-T-283Q, with a response deadline in July 2026 and a required delivery date of December 28, 2026.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336412
New
Federal
SPRRA126Q0025 // STARTER DRIVE, ASSEM // NSN 2840-01-461-9195This solicitation is a sole-source procurement issued to Honeywell Intl, Inc. for the acquisition of seven units of the Starter Drive, Assembly, Part Number 2-160-010-21, with National Stock Number 2840-01-461-9195. The procurement is managed under solicitation number AX6T6055AX and was posted on July 17, 2026, with a response deadline of August 18, 2026, at 7:30 PM Eastern Time. The contract falls under NAICS code 336412, which classifies it within the Aircraft Engine and Engine Parts Manufacturing sector. The issuing agency is the Defense Logistics Agency Aviation at Redstone Arsenal, Alabama, operating under the Department of Defense, with Richard Bulson designated as the primary point of contact for inquiries. The place of performance is listed as an unnamed location in Arizona, and the solicitation is accessible through the SAM.gov portal for further details.
Al DLA Aviation At Huntsville

POSTED

about 19 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336412
New
Federal
28--ACCESSORY GEARBOXThe contract pertains to the procurement of an Accessory Gearbox under solicitation SPRPA126RYC27, issued by the Department of Defense through the Defense Logistics Agency Aviation office in Philadelphia. It mandates strict compliance with a range of federal contracting clauses including mandatory use of the Workflow Pro Mod Assist module, requiring vendors to register through the NAVSUP WSS portal and designate Robyn Grinarml as the point of contact for system support. All post-award requests must be submitted exclusively via the NAVSUP WSS Vendor Portal, with specific instructions detailed in clause WSSTERMHZ17. The item is designated as a Critical Safety Item, necessitating heightened scrutiny and adherence to quality standards, including ISO 9001 or higher. The contract enforces Buy American provisions, requires submission of proposals via email, and includes provisions for certified cost or pricing data, limitation of liability for high-value items, and security prohibitions as outlined in recent 2026 deviations. The contractor must also comply with small business subcontracting and equal opportunity requirements, and adhere to transportation regulations for sea shipment. A priority rating for national defense use is applicable, and the solicitation permits only one offer. The response deadline is July 28, 2026, and the NAICS code indicates manufacturing within the aerospace engine and engine parts sector.
Pa DLA Aviation At Philadelphia

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336412
New
Federal
DUCT, AUGMENTOR, AIRC_End_Item_F110_NSN_2840015276870PR_PN_1452M70G10The U.S. Air Force, through the 421st SCMS Supply Chain Management Squadron at Tinker Air Force Base, Oklahoma, is conducting market research to identify qualified sources for the new manufacture of a duct augmentor component for the F110 engine platform, identified by part number 1452M70G10 and NSN 2840-01-527-6870PR. This effort is issued as a Sources Sought Synopsis under FAR Part 10 and is not a solicitation or request for proposal; no contract will be awarded based on responses, and no funds are currently available. The government is evaluating potential vendors—including large businesses, small businesses, disadvantaged businesses, service-disabled veteran-owned small businesses, HUBZone firms, and women-owned small businesses—to determine if the requirement can be competitively sourced or set aside for small business participation. Respondents must demonstrate the capability to handle full manufacturing processes including component procurement, inspection, testing, preservation, packaging, logistics, and supply chain management, and may be responsible for nonrecurring engineering costs to qualify as an approved source. The response deadline is July 25, 2026, and interested parties must select the “Add Me to Interested Vendors” button to participate. All communications and submissions must be directed to 421scms.requirements.workflow@us.af.mil.
Ok DLA Aviation At Oklahoma City

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336412
New
Federal
DUCT, EXHAUST, AIRCRA_End_Item_F110_NSN_2840014622338PR_PN_1602M64G08
Ok DLA Aviation At Oklahoma City

POSTED

about 19 hours ago

DEADLINE

in 30 days
View Details
NAICS: 336412
New
Federal
NSN3110-01-253-3236OK_RollerBearing_J85_PNR1916E112_FD2030-26-00820The contract pertains to the procurement of roller bearings designated by NSN 3110012533236, with part numbers R1916E112 and 5014T13P06, described as steel composite components designed to reduce friction. A total of 117 units are required, to be delivered in five installments to Tinker AFB, Oklahoma, with each delivery scheduled on or before the last day of the month from December 2026 through April 2027, amounting to 25 units per month for the first four shipments and 17 units in the final delivery. The contract period ends on August 30, 2026, with all deliveries scheduled to be completed by April 2027. The solicitation is conducted electronically under FAR 5.207(c)(16)(ii), allowing all responsible sources to submit proposals, and is classified as a presolicitation with a response deadline of August 17, 2026. This item was previously acquired under contract SPRTA126C0045, and the procurement is managed by the Department of Defense through the DLA Aviation office at Tinker AFB, with primary point of contact available via email for inquiries.
Ok DLA Aviation At Oklahoma City

POSTED

about 19 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336412
New
Federal
FD2030-27-00101The contract pertains to the procurement of a turbine frame for aircraft applications, identified by NSN 2840-01-200-5345PR and tied to drawing number 9343M79G02 with revision 18 dated January 21, 2025. The item is classified under MDC code AAM and is managed by Rebecca L. Roach. The contract, designated FD2030-27-00101, was posted on July 17, 2026, with a response deadline of January 17, 2027, and falls under NAICS code 336412, indicating its alignment with aircraft engine and engine parts manufacturing. It is issued by the Department of Defense through DLA Aviation Oklahoma City under a special notice type, with no set-aside designation, and the performance location is unspecified. All inquiries and submissions must be routed through the official SAM.gov portal linked to the solicitation.
DLA Aviation Oklahoma City

POSTED

about 19 hours ago

DEADLINE

in 6 months
View Details
NAICS: 336412
New
Federal
SHAFT, TURBINE, AIRC_End_Item_F110_NSN_2840013113811PR_PN_1499M83P02The U.S. Air Force, through the 421st Supply Chain Management Squadron at Tinker Air Force Base, is conducting market research to identify qualified sources for the new manufacture of a turbine shaft, part number 1499M83P02 with NSN 2840-01-311-3811PR, intended for F110 platform applications. This solicitation is a Sources Sought synopsis under FAR Part 10, not a formal request for proposal, and no contract award is anticipated from this effort. The government is seeking input from potential suppliers—including large businesses, small businesses, small disadvantaged businesses, 8(a) firms, service-disabled veteran-owned small businesses, HUBZone businesses, and women-owned small businesses—to assess market capability, determine if the requirement can be competitively sourced, and evaluate potential for a small business set-aside. Responses must be submitted via the designated vendor interest button by the deadline, and no funding is available for information gathered during this phase. Potential vendors must demonstrate the capacity to manufacture the item from raw materials or components, including all associated processes such as inspection, testing, preservation, packaging, and shipping. Responsibilities may also extend to supply chain management, logistics planning, production forecasting, mitigation of diminishing manufacturing sources and material shortages, and handling nonrecurring engineering costs to qualify as an approved source. The designated place of performance is Tinker AFB, Oklahoma, and all correspondence must be sent to the provided workflow email. The North American Industry Classification System code is 336412, with a size standard of 1,500 employees, and the requirement falls under the Department of Defense’s Air Force Sustainment Center. No solicitation exists at this time, and inquiries for one will not be answered; this effort is strictly for market analysis to inform future acquisition strategy.
Ok DLA Aviation At Oklahoma City

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336412
New
Federal
F-100 Seal, Metallic, AircrThe U.S. Department of Defense, through the Ok DLA Aviation office at Tinker Air Force Base, Oklahoma, is issuing a presolicitation for the procurement of the F-100 Seal, Metallic, Aircr, identified by NSN 2840-01-436-9105NZ and part number 4082667-01, under solicitation number SPRTA1-26-R-1102. This acquisition falls under NAICS code 336412 and is not subject to any set-aside provisions, making it open to all responsible sources. The requirement is for 301 units to be delivered on or before February 9, 2028, with a potential option range extending from a minimum of 76 units to a maximum of 455 units. The item is classified as a Critical Safety Item, requiring first article testing and formal qualification of the proposed product, and is subject to export control regulations. The Government will not provide specifications, plans, or drawings for the item, placing full responsibility on the offeror to meet the required performance standards based on the item’s known designation and usage context. The solicitation will be issued electronically via www.fbo.gov with an estimated release date of June 26, 2026, and proposals are due no later than July 28, 2026. The award decision will be based on a combination of price, technical approach, and past performance, though specific evaluation criteria and weighting have not yet been determined. All offers must comply with applicable Federal Acquisition Regulation provisions, and the contract is contingent upon the availability of appropriated funds. Submission of capability statements, proposals, or quotations is encouraged under FAR 5.207(c)(16)(ii), and the Government has appointed an ombudsman to address concerns during the pre-solicitation phase. Questions should be directed to the contracting officer, Jeremy Bryant, at 405-855-7112 or Jeremy.bryant@us.af.mil. The place of performance and inspection details remain unspecified, but deliveries must be made to location SW3211, and surplus materials are not authorized for use in fulfillment of this requirement.
Ok DLA Aviation At Oklahoma City

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336412
New
Federal
Cutback shroud replacements, T64 SIO Contract SPE4AX19D9400
DLA Aviation

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336412
New
DIBBS
Precision Aerospace Component Manufacturing – Pylon Section, AirCRThe contract involves the manufacture or supply of a fully compliant Pylon Section, AirCR, identified by NSN 1560016746405, a vital structural component used in military aircraft systems. This subcontract requires strict adherence to military technical specifications and quality standards to ensure operational reliability and safety in defense applications. The component must be produced to exact engineering requirements and undergo rigorous validation to meet the stringent performance criteria established by the Department of Defense. Performance of the work is designated for Jacksonville, Florida, with the deliverable expected to fully integrate into existing aircraft platforms without modification or deviation. The solicitation is posted under the NAICS code 336412, indicating a focus on aircraft manufacturing and assembly, and is managed by the ASC SUPPLIER OPER OEM DIVISION. Bidders must submit responses by July 24, 2026, with the posting date established on July 16, 2026, providing a narrow eight-day window for proposal preparation. While no set-aside provisions or organizational type designations are specified, the contract is structured as a subcontract under a larger DoD procurement framework, suggesting that potential suppliers must already hold relevant certifications and prior experience in defense aerospace component production. All interested parties must access the full solicitation through the DIBBS portal using the provided link to ensure compliance with submission protocols and technical documentation requirements.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 541330
New
DIBBS
Quality Assurance & Inspection Services
Engineering Services

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details
NAICS: 493190
New
DIBBS
Government Surplus Property Handling & Repackaging Services
Other Warehousing and Storage

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
Precision Machining of Fuel Line Components
Spring Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541380
New
DIBBS
First Article Testing (FAT) ServicesThe contract seeks specialized First Article Testing services for a military duct assembly, requiring full compliance with Department of Defense standards, including the proper execution of tests and submission of documentation such as DD Form 250. The work must be performed by a qualified small business as this is a Total Small Business Set-Aside under FAR 19.5, classified under NAICS code 541380 for other scientific and technical consulting services. All testing activities must align with military specifications and deliverables to ensure the duct assembly meets required performance, safety, and quality benchmarks before production. The solicitation, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, has a response deadline of July 29, 2026, and is accessible via the DIBBS platform. The place of performance and physical address details are unspecified, indicating flexibility in location, but the work must be completed in accordance with federal contract requirements. The contract structure is a subcontract, meaning the selected vendor will likely work under a prime contractor to supply certified test results and documentation critical to the military supply chain.
Testing Laboratories and Services

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
Supply of Military Duct AssemblyThe contract requires the manufacture, testing, packaging, and delivery of 39 military-grade duct assemblies identified by NSN 1660-00-799-5861, all of which must adhere strictly to applicable military specifications. Each unit must undergo First Article Testing to verify compliance with design and performance requirements, and must be uniquely identified with IUID marking to ensure traceability across the Defense Logistics Agency’s inventory system. The work is solicited as a subcontract under a Total Small Business Set-Aside, meaning only small business concerns certified by the SBA are eligible to respond, and the NAICS code 332999 indicates the performance falls under Other Miscellaneous Fabricated Metal Product Manufacturing. The solicitation was posted on July 17, 2026, with a response deadline of July 29, 2026, and the contracting office is the ASC Supplier Oper AE and AF Division within the Department of Defense. All delivered items must be ready for immediate integration into military systems, with no deviation from the stated technical and administrative requirements.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332721
New
DIBBS
Precision Manufacturing of Threaded Tapered Pins (Critical Application Item)The contract requires the manufacture and supply of precision-machined tapered threaded pins designated as P/N AN386-3-16A and NSN 5315-00-265-9892, classified as a Critical Application Item due to their essential role in military systems. All components must strictly comply with applicable military specifications, ensuring dimensional accuracy, material integrity, and performance under demanding operational conditions. Rigorous quality control protocols are mandated, including full traceability of raw materials through every production stage, with documentation verifying origin, processing, and inspection results. Each unit must undergo inspection and certification to confirm adherence to technical requirements and avoid any risk of nonconformance. The solicitation, issued under the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, is structured as a subcontract and falls under NAICS code 332721 for machine shops. The response deadline is set for July 21, 2026, with the posting date on July 17, 2026. Place of performance details are unspecified, but the requirement for traceability and origin inspection implies that manufacturing and inspection activities must occur within approved facilities capable of meeting defense standards. The lack of a set-aside designation suggests this opportunity is open to all qualified suppliers, with the emphasis squarely on technical compliance, documentation rigor, and proven capability in producing mission-critical aerospace and defense hardware.
Precision Turned Product Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 3 days
View Details
NAICS: 332813
New
DIBBS
Specialized Material Supply and ProcessingThe contract calls for the supply of alloy steel and corrosion-resistant materials alongside specialized processing services including heat treatment, plating, anodizing, and welding, all requiring full documentation, certification, and traceability to ensure compliance with stringent quality standards. The materials and services are intended to meet precise technical specifications critical for defense and aerospace applications, with all work subject to rigorous inspection and adherence to industry-approved protocols. Issued under the NAICS code 332813 for forge shops and foundries, this subcontract is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with responses due by July 24, 2026. The work is expected to be performed without geographic restriction specified, and all deliverables must be accompanied by comprehensive records verifying material origins, processing steps, and final inspections to ensure full accountability and readiness for military use.
Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 14 hours ago

DEADLINE

in 6 days
View Details
NAICS: 541380
New
DIBBS
First Article Testing and Certification ServicesThe contract solicits independent testing and certification services for the first article unit, requiring comprehensive dimensional inspection, material verification, and nondestructive testing in compliance with ASTM-E1417 standards. The work must be performed to.validate conformance to technical specifications prior to formal acceptance, with all findings and documentation submitted to Hill Air Force Base. This subcontract is categorized under NAICS code 541380, indicating it falls within the scientific and technical consulting services sector, and is issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The solicitation was posted on July 17, 2026, with a response deadline of July 24, 2026, requiring proposers to submit their offerings within this seven-day window. Performance is expected to be conducted in accordance with federal contracting requirements, though the specific place of performance and point of contact details are not provided.
Testing Laboratories and Services

POSTED

about 14 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332721
New
DIBBS
Precision Manufacturing of Quick Release Pin ReceptacleThe contract calls for the precision machining and production of a quick release pin receptacle designated by NSN 5342-01-049-0333, manufactured to strict military specifications with full compliance to all applicable effectivity bullets and MIL-STD-130 marking requirements. The component must meet all first article inspection criteria to ensure dimensional accuracy, material integrity, and functional performance in demanding operational environments. Production must be executed under a subcontracting arrangement, with adherence to defense procurement protocols governing quality assurance, traceability, and documentation. The solicitation was posted on July 17, 2026, with a response deadline of July 24, 2026, and falls under NAICS code 332721 for metal forging and stamping. The contracting organization is the ASC SUPPLIER OPER AE AND AF DIV within the Department of Defense, indicating direct relevance to military supply chain operations. Although no specific place of performance or point of contact is detailed, the requirement implies that all work must be performed by qualified suppliers capable of meeting defense-grade manufacturing standards and delivering fully compliant hardware on schedule.
Precision Turned Product Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332999
New
DIBBS
Supply of Blind Rivets (NSN 5320-00-883-9393)The contract entails the manufacture and delivery of exactly 70 units of a specific blind rivet identified by NSN 5320-00-883-9393, under a firm fixed-price arrangement, ensuring cost certainty for both parties. All items must comply with mandatory military packaging and labeling specifications to meet Department of Defense standards for readiness and logistics. The work is procured as a subcontract under NAICS code 332999, indicating it falls under other miscellaneous fabricated metal product manufacturing, and is managed by the ASC SUPPLIER OPER AE AND AF DIV under the broader Department of Defense. The solicitation was posted on July 17, 2026, with responses required by July 21, 2026, establishing a tight, four-day window for submission. The place of performance and point of contact details are not specified, but the official solicitation is accessible via the DIBBS platform for further procurement details.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 3 days
View Details
NAICS: 484220
New
DIBBS
Domestic and International Freight LogisticsThe contract involves the transportation of manufactured units from their origin to designated government destinations, encompassing both domestic trucking and potential international ocean freight services. All logistics operations must strictly comply with U.S. cargo preference laws, ensuring compliance with federal requirements for the use of U.S.-flagged vessels and domestic carriers where applicable. The work is classified as a subcontract under NAICS code 484220, which pertains to truck transportation for moving goods, and is issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Responses are due by July 19, 2026, with the solicitation posted on July 17, 2026, and all performance activities are tied to government-controlled endpoints without specified geographic limitations.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 14 hours ago

DEADLINE

in 1 day
View Details
NAICS: 326199
New
DIBBS
Specialized Packaging and PreservationThis contract mandates the application of military-compliant preservation and packaging standards in strict accordance with MIL-STD-2073-1E and MIL-STD-129R, ensuring that all items are protected for long-term storage and transportation under demanding conditions. The required procedures include vacuum sealing to eliminate moisture and contaminants, the inclusion of appropriate desiccants to maintain low humidity levels within packaging, and the placement of Type I (Code U) shelf-life labels that clearly indicate the expiration and storage requirements for the preserved items. These measures are essential to maintain the operational readiness and integrity of defense-grade equipment and components throughout their designated service life. The contract is structured as a subcontract under the NAICS code 326199, which corresponds to other plastic product manufacturing, and is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. The solicitation was posted on July 17, 2026, with a firm response deadline of July 19, 2026, indicating a tight turnaround for qualified vendors to submit proposals. The place of performance and point of contact details are unspecified, leaving full responsibility for logistics and coordination to the subcontractor. Compliance with all technical specifications and labeling requirements is mandatory, and failure to meet these standards may result in rejection of delivered goods or contract termination.
All Other Plastics Product Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 1 day
View Details