Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Aircraft Protection Technology Testing and Evaluation (T&E)

Active

Federal

Response Deadline11/23/2030, 10:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Aircraft Protection Technology Testing and Evaluation subcontract, managed by the Department of Defense under agency FA2057 Aflcmc Hnjk, focuses on the testing and evaluation of fabricated products for prime contractors on Air Force aircraft protection projects. The scope of work includes conducting environmental and stress testing, performance validation, and evaluation against government milestones using specialized equipment such as testing chambers, sensors, and data acquisition systems. Based at Hanscom AFB, the contract requires the delivery of comprehensive test reports, evaluation data, and validation certifications. Due to the nature of the work, a NIST assessment is required for access to Controlled Unclassified Information. The opportunity is categorized under NAICS code 541380 and has a response deadline of November 23, 2030.

General Info

DoD subcontract for testing and evaluating aircraft protection products at Hanscom AFB.

Agency

Department Of Defense → FA2057 Aflcmc HnjkView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

Hanscom AFB, MA, 01731, USA

Set-Aside

NONE

Documents

This scope was carved out of FA2057-26-S-C001.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Research and Development (R&D) for Next Generation Aircraft Protection Technologies

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedFeb 8

subcontract

Response DeadlineNov 23

Submission deadline

Response Deadline

11/23/2030, 10:00:00 PM UTCin about 4 years

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA2057 Aflcmc Hnjk

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FA2057 Aflcmc Hnjk

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs testing and evaluation of fabricated products for prime contractors on Air Force aircraft protection projects. Conducts environmental testing, stress testing, performance validation, and evaluation against government milestones. Utilizes testing chambers, impact testing equipment, sensors, and data acquisition systems. Requires NIST assessment for CUI access. Delivers test reports, evaluation data, and validation certification.

Similar Contracts

Same NAICS industry code

Ladder and Hose Testing Services

Solicitation # 799

The Capitol Region Purchasing Council, under DAS Procurement for the state of Connecticut, is soliciting bids for solicitation number 799-2026 to provide on-site ladder and fire hose inspection, testing, and certification services for its participating members. The contract requires all services to be performed in accordance with NFPA 1932, 1914, 1961, and 1962 standards. The established contract period runs from October 1, 2026, through September 30, 2027. Interested vendors must submit their responses by the deadline of September 23, 2026, at 1:00 PM. The solicitation includes specific requirements regarding pricing rules, insurance, indemnification, and performance liability. Primary coordination for this opportunity is managed by Kimberly Bona, and further details and submission processes are hosted on the Bonfire hub and the CTSource Bid Board.

DAS Procurement

POSTED

about 14 hours ago

DEADLINE

Air Flask Ultrasonic Shear Wave and Thickness Inspection

POSTED

about 15 hours ago

DEADLINE

Environmental & Qualification Testing

FA2103 Afnwc Ndb Ndke

POSTED

about 15 hours ago

DEADLINE

in about 2 months

Material Testing and Certification (Destructive Testing)

Navsup Weapon Systems Support Mech

POSTED

about 15 hours ago

DEADLINE

Diesel Jacket Water Analysis Services

Nswc Philadelphia Division

POSTED

about 15 hours ago

DEADLINE

Petrofluid and Lubricant Testing Services

Nswc Philadelphia Division

POSTED

about 15 hours ago

DEADLINE

Ultrasonic Inspection of Bearing Ball Starting Material

Navsup Weapon Systems Support Mech

POSTED

about 15 hours ago

DEADLINE

Cat 6 Permanent Link and Channel Certification

POSTED

about 15 hours ago

DEADLINE

16S V4 Amplicon Library Preparation Services

Ofc Of Acquisition Grants-Denver

POSTED

about 15 hours ago

DEADLINE

H--BPA for ISOTOPIC/MINERALOGICAL ANALYSIS

Solicitation # 140G0126Q0254

The USGS Florence Bascom Geoscience Center is establishing a five-year Blanket Purchase Agreement (BPA) from September 15, 2026, to September 14, 2031, for laboratory services to process geologic samples. The scope includes geochemical, mineralogical, and isotopic analyses, specifically utilizing X-ray diffraction (XRD) via the Rietveld method and radiogenic and stable isotope analysis for Pb, Nd, Sm, Sr, O, S, N, and C. The contract is a total small business set-aside under NAICS code 541380, with a total not-to-exceed value of $200,000 over the five-year period. While no minimum or maximum order amounts are guaranteed annually, individual calls will be processed as firm fixed-price contracts based on unit prices per sample. To be eligible, laboratories must be registered with SAM.gov and certified to ISO/IEC 17025:2017 standards, including ISO 9001:2015 and ISO 9002 specifications. Key deliverables include analytical results and QA/QC data provided in Excel workbook format within 120 days, with processed samples returned to the USGS within 90 days. Award decisions will be based on the most advantageous offer, weighing price and past performance equally. Payments will be processed electronically through the Treasury's Invoice Processing Platform (IPP), and the contractor must adhere to Wage Determination No. 2015-4281 Rev. 38.

Ofc Of Acqusition Grants-National

POSTED

about 15 hours ago

DEADLINE

33-0074; Petrofluid Testing Services

Solicitation # N64498-26-RFPREQ-PD-33-0074

The Naval Surface Warfare Center, Philadelphia Division (NSWCPD) is conducting market research via a Sources Sought notice (N64498-26-RFPREQ-PD-33-0074) to identify capable contractors for a potential single-award, firm-fixed-price IDIQ contract. The requirement is for comprehensive testing services of U.S. Navy lubrication oil, fuel oil, hydraulic oil, grease, and jacket water. The anticipated contract will feature a 60-month ordering period within a total 72-month period of performance, including a 90-day phase-in period. Services will be performed primarily at the contractor's facility, which must be ISO/IEC 17025 certified and located within the Continental United States. The contractor will be responsible for providing sampling kits, managing the receipt and storage of samples for 45 days, and performing analysis according to ASTM and ISO standards. Key deliverables include daily electronic data uploads, monthly status reports, and calibration certificates. Security requirements are stringent, requiring personnel to have Tier 3 investigations recorded in DISS for system access and strict adherence to NIST SP 800-171 for handling Controlled Unclassified Information. Interested respondents must submit a capability statement of no more than five pages to the designated point of contact by August 27, 2026, demonstrating their technical capacity, management experience, and ability to perform at least 50 percent of the work using in-house employees.

Nswc Philadelphia Division

POSTED

about 15 hours ago

DEADLINE

FCC Terre Haute DRINK WATER TESTING FY27

Solicitation # 15B418Q00000002

The Federal Bureau of Prisons is soliciting quotes for weekly drinking water testing and water operator services at the Federal Correctional Complex in Terre Haute, Indiana. The primary period of performance runs from October 1, 2026, through September 30, 2027, with four additional one-year option periods. Services must comply with EPA and Indiana Department of Environmental Management requirements and include chlorine residual testing, iron and manganese testing, monthly reporting, and the provision of certified operators with DSL and WT3 licensing. This is a total small business set aside under NAICS code 541380. The government will award the contract based on best value, prioritizing past performance and price. This is an all-or-none quote, meaning vendors must quote all items to be considered. Interested parties must be registered in the System for Award Management and submit their quotes electronically to Richard Moothery by September 22, 2026, at 11:00 AM.

USP Terre Haute

POSTED

about 15 hours ago

DEADLINE

in about 1 year

More opportunities from Department Of Defense → FA2057 Aflcmc Hnjk

Same awarding agency

Aircraft Protection Component FabricationThis subcontract for Aircraft Protection Component Fabrication supports prime contractors on Air Force aircraft protection projects through the Department of Defense. The scope of work involves the sourcing of aerospace-grade materials, precision machining using CNC equipment, and the assembly of prototypes and final hardware. Performance will take place at Hanscom AFB. To qualify, providers must adhere to AS9100 quality management standards and undergo a NIST assessment for Controlled Unclassified Information access. The contract falls under NAICS code 332710 and remains open for responses until November 23, 2030.

POSTED

DEADLINE

in about 4 years

Aircraft Protection System DesignThis subcontract for the Department of Defense, specifically the FA2057 Aflcmc Hnjk agency, involves providing detailed engineering design services for Air Force aircraft protection projects. The selected contractor will support prime contractors by converting feasibility results into technical blueprints, CAD modeling, systems engineering, and design specifications for fabrication. This work requires the use of advanced CAD/CAM software and aerospace engineering simulation tools, with a final delivery consisting of a complete design package, technical drawings, and specifications. The project is performed at Hanscom AFB under NAICS code 541330. Due to the nature of the work, a NIST assessment is required for access to Controlled Unclassified Information. The opportunity was posted on February 8, 2026, with a response deadline of November 23, 2030.

Engineering Services

POSTED

DEADLINE

in about 4 years

Aircraft Protection Technology Feasibility ResearchThe Aircraft Protection Technology Feasibility Research subcontract, issued by the Department of Defense under agency FA2057 Aflcmc Hnjk, focuses on initial research and development for Air Force aircraft protection projects. The selected provider will perform feasibility studies, theoretical modeling, and proof-of-concept development to validate technology concepts using simulation software, prototyping tools, and R&D laboratory facilities. The primary deliverables for this effort are a comprehensive feasibility report and a successful proof-of-concept demonstration. This project is categorized under NAICS code 541715 and will be performed at Hanscom AFB. Due to the nature of the work, the contractor must maintain NIST assessment compliance for handling Controlled Unclassified Information. The solicitation was posted on February 8, 2026, with a response deadline set for November 23, 2030.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

in about 4 years

Research and Development (R&D) for Next Generation Aircraft Protection Technologies

Solicitation # FA2057-26-S-C001

The Department of the Air Force, through AFLCMC/HNJW, is soliciting innovative solutions for the Research and Development of Next Generation Aircraft Protection Technologies under solicitation FA2057-26-S-C001. This effort seeks to develop a modular, upgradable protection system based on open architecture standards, focusing on four primary areas of interest: System Architecture, Modeling and Simulation; the Detect Layer (Sensing); the Decide Layer (Processing); and the Defeat Layer (Countermeasures and Effectors). The government is interested in advanced sensor technologies, processing hardware and software, and both kinetic and non-kinetic countermeasures. All submissions must demonstrate compliance or provide a roadmap for the Agile Mission Suite Government Reference Architecture. The procurement utilizes a two-step closed submission process consisting of an initial white paper followed by a full proposal if requested. The project structure is divided into base period tasks to demonstrate technology feasibility and subsequent option tasks for design, fabrication, testing, and evaluation, with the latter being contingent upon performance in the base period. Eligible vendors include traditional and nontraditional defense contractors, small and large businesses, and research institutions. Because the solicitation contains Controlled Unclassified Information, vendors must have current NIST assessments uploaded to the Supplier Performance Risk System to gain access to attachments. The solicitation remains open for a five-year period, during which the government may amend the areas of interest.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

in about 4 years

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS