Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Aircraft Recovery System

Active

W912QM25Q0057Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract pertains to the procurement of an Aircraft Recovery System, including one Aircraft Airlift System and one Air Bab Pneumatic Control Console, with shipping designated to Charleston, South Carolina. The requirement is contingent upon the availability of funds, indicating that the contract's execution depends on budget confirmation. The solicitation, identified by number W912QM25Q0057, was posted on September 11, 2025, by the Department of Defense under the Agency Code 0410 Aq Hq Contract. It is listed as a presolicitation with no set-aside status, meaning it is open for competition without specific restrictions for small or disadvantaged businesses. The contract falls under the NAICS code 336413, which corresponds to guided missile and space vehicle manufacturing, aligning with the nature of the aircraft recovery equipment being procured. The point of contact for this acquisition is Eduardo Castillo, reachable via email or phone. The place of performance is Comayagua, with the office responsible for the contract located in APO, AA 34042-5720, USA. The contract documentation and related updates are accessible through the provided SAM.gov workspace link.

General Info

Procurement of Aircraft Recovery System with Airlift and Pneumatic Console, contingent on funding, open competition.

Agency

Department Of Defense → 0410 Aq Hq ContractView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

Comayagua, AA, 12101, HND

Set-Aside

NONE

Documents

(1)

612_Salient+Characteristics_CCDAR.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update

PhasePresolicitation

PostedSep 11

Presolicitation

Amendment 1Sep 11

Contract was updated

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → 0410 Aq Hq Contract

Contacts1 person available

OfficeAPO, AA, 34042-5720, USA

Organization / Agency

Department Of Defense → 0410 Aq Hq Contract

View Agency Profile

Office AddressAPO, AA, 34042-5720, USA

Contacts

Eduardo Castillo

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

REQUIREMENT SUBJECT TO AVAILABILITY OF FUNDS - One (1ea) Aircraft Airlift System - One (1ea) Air Bab Pneumatic Control Console - Shipping to Charleston, SC

Similar Contracts

Same NAICS industry code

Manufacture of Navigational Lights (Prime-Level Assembly & Testing)

DDSP NEW CUMBERLAND FACILITY

POSTED

about 17 hours ago

DEADLINE

Pump Assembly, Cylinder Supply (NSN 1730-00-140-2526)The contract outlines the procurement and delivery of one unit of a pump assembly, cylinder with National Stock Number 1730-00-140-2526, required to meet all applicable military packaging, labeling, and hazardous materials standards to ensure safe handling and transportation. This is a subcontract under the NAICS code 336413, which corresponds to aerospace product and parts manufacturing, and is managed by the Department of Defense under the organizational designation Construction & Equipment Manu & Con. The solicitation was posted on July 22, 2026, with a response deadline of August 3, 2026, indicating a tight timeline for potential vendors to submit proposals. The place of performance is specified as New Cumberland, Pennsylvania, with a ZIP code of 17070-5002, suggesting the component is intended for use or integration at a Defense Logistics Agency facility or associated military installation. Although no point of contact or set-aside details are provided, the requirement for compliance with stringent military logistics standards implies that only qualified suppliers with appropriate certifications and experience in defense-grade equipment are eligible to respond. The contract is accessible via a DIBBS portal link for further submission details and documentation.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 17 hours ago

DEADLINE

PARTS KIT, JACKThis contract pertains to the procurement of a Parts Kit, Jack, identified by NSN 1730-00-673-4718 and part number TES3-3, with a total quantity of 16 units, each to be delivered at a unit price of $16.00, resulting in a total contract value of $256.00. The delivery is to be made FOB origin within 167 days from the solicitation, with no variance allowed in quantity, and inspection and acceptance occur at the destination. All packaging must comply strictly with ASTM D3951 and MIL-STD-129 for marking and labeling, and palletization must adhere to DLA’s Packaging Requirements for Procurement, which supersede all other standards. The DLA Master List of Technical and Quality Requirements takes precedence over all other specifications, and covered defense information protocols apply. The item is subject to a total small business set-aside under NAICS code 336413, and the delivery destination is DLA Distribution Jacksonville at Bldg 175, Swan Road, Jacksonville, FL 32212-0103, with Russell Keiser listed as the primary point of contact. The original required delivery date is December 5, 2026, with a revised ship date of January 18, 2027.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 17 hours ago

DEADLINE

PUMP ASSEMBLY, CYLINThe contract is for the procurement of one unit of a pump assembly, cylinder, identified by NSN 1730-00-140-2526 under purchase request 7017585531, with a delivery requirement of 167 days after award. The solicitation number is SPE8EF-26-T-1501, posted on July 22, 2026, with responses due by August 3, 2026. It falls under NAICS code 336413 and is categorized as a federal procurement by the Department of Defense under the Construction & Equipment Manu & Con organization. Performance is required at New Cumberland, Pennsylvania, 17070-5002. The contract incorporates technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with compliance based on the version in effect at the time of solicitation or award depending on acquisition type. Cybersecurity Maturity Model Certification Level 2 self-assessment is mandated, and the handling of covered defense information is required. Packaging must meet DLA standards, and government identification must be removed from any non-accepted supplies. The primary point of contact is Raymond Horn, reachable via phone and email provided.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 17 hours ago

DEADLINE

LINER, ACTUATORThe contract pertains to the procurement of LINER, ACTUATOR with part number 292340, sourced from Linear Motion LLC, and also includes alternate suppliers Ontic Engineering & Manufacturing Inc and Mistequay Group Ltd with part number CA67818-001. The item is designated as a critical application item and is governed by stringent technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which override any other referenced standards. The contract mandates adherence to MIL-STD-1916 or ASQ H1331 for sampling, with zero non-conformances required unless otherwise specified, and applies specific verification levels and AQLs for critical, major, and minor attributes. Configuration changes require formal engineering change proposals or variance requests, and all non-accepted supplies must have government identification removed prior to return. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA’s RP001, and all items must be clearly marked as per RQ017. Delivery is FOB origin, with inspection and acceptance occurring at destination after a 170-day delivery window, and the quantity is fixed at 14 units with no variance permitted. The unit price is $14.00, totaling $196.00, and the NSN is 1680-00-492-0817. The required delivery date is September 22, 2027, with a need ship date of January 17, 2027. All shipments must be routed to DLA Distribution Depot Hill at Hill AFB, Utah, following DLAD procedural notes C19 and C20 for transportation and first destination logistics.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 17 hours ago

DEADLINE

LIGHT, NAVIGATIONAL,The contract pertains to the procurement of 70 units of a navigational light, identified by NSN 6220-01-628-9651 and part number 34000-7 manufactured by GLAMOX AQUA SIGNAL CORPORATION, under solicitation SPE8E7-26-T-3386. Delivery is required within 167 days from the award date, with terms set at FOB origin and no variance allowed in quantity, meaning exactly 70 units must be delivered. Inspection and acceptance occur at the destination, and packaging must comply fully with MIL-STD-2073-1E and MIL-STD-129 for marking, including precise codes for packaging methods, materials, and containers as specified. The item is subject to DLA’s Packaging Requirements for Procurement and Hazmat packaging standards, with shipments directed to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract incorporates technical and quality requirements referenced from the DLA Master List, and all provisions are governed by the version of the master in effect on the solicitation issue date. The original delivery deadline is December 14, 2026, but the needed ship date is set for January 18, 2027, allowing time for processing and logistics. Payment is based on a unit price of $70, resulting in a total contract value of $4,900. The point of contact for inquiries is Kelly Mitchell of the Department of Defense, with all correspondence and compliance governed under DLA procedures and federal acquisition standards.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 17 hours ago

DEADLINE

PARTS KIT, HYDRAULICThis contract pertains to the procurement of a hydraulic parts kit, specifically a jack, identified by NSN 1730-01-206-1710 and manufacturer part number 120A1540 from Columbus Jack Corporation, with a total quantity of 4 kits. The item is classified as a critical application item and a Type I shelf-life item with a non-extendable 120-month shelf life, requiring a minimum of 85% remaining shelf life upon receipt by the first government activity. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, including clear indications of manufactured and expiration dates and special marking code 32 for Type I shelf life. The delivery is FOB origin with a required delivery date of December 7, 2026, and a need ship date of May 28, 2027, allowing 297 days for delivery. All packaging must adhere to DLA’s procurement requirements and palletization standards. The item is subject to DLA’s master list of technical and quality requirements, and any covered defense information provisions apply. Inspection and acceptance occur at the destination, with no variance allowed in quantity. The delivery address is DLA Distribution San Diego, and transportation details follow DLA procedural notes C19 and C20.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 17 hours ago

DEADLINE

BRAKE, CASTER ASSEMBThe contract solicitation is for a Brake, Caster Assembly with NSN/Part Number 1730-00-129-8652, requiring a quantity of nine units under Purchase Request 7017585489. The delivery window is set at 167 days ADO, and the solicitation number is SPE8EF-26-T-1481, issued by the Department of Defense through the Construction & Equipment Manu & Con agency. Offers must be submitted by the response deadline of August 3, 2026, with the solicitation posted on July 22, 2026. The North American Industry Classification System code is 336413, indicating the procurement falls under the manufacturing of aircraft parts and accessories. Performance is to occur at Robins AFB, Georgia, with Russell Keiser identified as the primary point of contact for inquiries. The contract incorporates all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and the applicable version is determined by the solicitation issue date or any subsequent amendment. Government identification must be removed from non-accepted supplies as per RQ011 requirements. No bidset is available from DLA, and the alternate offeror must provide a complete data package including specifications for both approved and alternate parts, with no sampling data currently available.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 17 hours ago

DEADLINE

MAINTENANCE PLATFORThis contract, issued under solicitation SPE8EF-26-T-1505 by the Department of Defense through the Defense Logistics Agency, specifies the procurement of one unit of a maintenance platform identified by NSN 1730-01-694-8732 and part number MXPS-SD-KIT-USN. The item must be delivered FOB origin within 167 days of the requirement, with no variance allowed in quantity, and is subject to inspection and acceptance at the destination. Packaging and labeling must comply with MIL-STD-129 and ASTM D3951, with precedence given to DLA Master List of Technical and Quality Requirements, and palletization must adhere to DLA Packaging Requirements for Procurement. Cybersecurity requirements mandate a CMMC Level 2 Self-Assessment, and all documentation must reflect compliance with guidelines for handling covered defense information and the removal of government identification from non-accepted supplies. The delivery destination is identified as DLA District San Joaquin in Tracy, California, with the required ship date set for January 18, 2027, following an original delivery deadline of January 9, 2027. The contract references applicable technical and quality standards through DLA’s official eProcurement portal and requires adherence to specific unit of issue and packaging configurations. The point of contact for this solicitation is Russell Keiser, and the NAICS code for the acquisition is 336413, indicating its classification under construction and equipment manufacturing.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 17 hours ago

DEADLINE

FLUID SERVICE UNITThe Fluid Service Unit contract under solicitation SPE8EF-26-T-1488 specifies the procurement of four units with NSN 1730-01-088-4611 and part number 630AS100-11, to be delivered FOB origin within 167 days of the contract award, with a required ship date of January 18, 2027 and an original delivery deadline of July 20, 2027. The units must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, and packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, including specific preservation, wrapping, and palletization protocols per DLA Packaging Requirements. The delivery destination is DLA Distribution Red River, Receiving Building 499 in Texarkana, TX, and inspection and acceptance occur at the destination with zero variance allowed in quantity. The contract mandates Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment compliance and applies covered defense information protocols. Payment terms are set at $4.00 per unit, totaling $16.00, with the unit of issue being each. The procurement is governed by DLA procedures for transportation and freight, and the solicitation was posted on July 22, 2026, with a response deadline of August 3, 2026, under NAICS code 336413 for aircraft and parts manufacturing.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 17 hours ago

DEADLINE

COVER, AIRCRAFT GROUThis contract pertains to the procurement of eight aircraft cover units, identified by NSN 1730-01-692-2667 and part number 23060203, supplied by L&C PROTEC, INC. The item is classified as a critical application component and must adhere to all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede any other standards such as ASTM D3951. Packaging must conform to MIL-STD-129 for marking and labeling, and palletization must comply with DLA’s specific packaging requirements outlined in RP001. The unit of issue is each, with a contract unit price of $8.00, totaling $64.00. Delivery is scheduled for 167 days after award, with FOB origin terms, and inspection and acceptance occur at the destination warehouse in Tracy, California. The item must be delivered no later than February 21, 2027, with an original need date of January 18, 2027. Cybersecurity compliance is mandated at CMMC Level 2 via self-assessment, and covered defense information protocols apply. All government identification must be removed from non-accepted supplies, and the contract is subject to DoD unit of issue standards as referenced in the official DLA documentation. The procurement is under solicitation SPE8EF-26-T-1494, issued by the Department of Defense, with Russell Keiser as the primary point of contact.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 17 hours ago

DEADLINE

WHEEL, ABRASIVEThe contract governs the procurement of 11 abrasive wheels with NSN 3460015960071 and part number 07660788246 from Norton Co Advanced Ceramics under solicitation SPE8E6-26-T-3803, issued by the Department of Defense’s DDSP New Cumberland Facility. The item is priced at $11.00 per unit for a total contract value of $121.00, with delivery required within 167 days after award, targeting an original delivery date of November 29, 2026, and a need ship date of January 18, 2027. All supplies must be delivered FOB origin, inspected and accepted at the destination located at 2083 Normandy Drive, Door 113 to 134, New Cumberland, PA 17070-5002. Packaging must strictly adhere to MIL-STD-129 for marking, labeling, and barcoding, including NSN, unit of issue, and quantity per unit pack details, while palletization follows RP001: DLA Packaging Requirements for Procurement. Although ASTM D3951 is referenced for commercial packaging, it is superseded entirely by the DLA Master List of Technical and Quality Requirements, which controls all technical and quality standards. The contract mandates compliance with Far clauses related to fixed-price terms, inspection at destination, default provisions, and safeguarding of covered defense information as per NIST SP 800-171 and DFARS 252.204-7008. Offerors must represent their small business status and comply with employment and trafficking in persons requirements, while hazardous materials must be labeled according to 29 CFR 1910.1200 and DFARS 252.223-7001. Payment must be submitted exclusively through WAWF using the DoDAAC system, and all proposals must be submitted electronically via DIBBS by August 3, 2026. The solicitation includes multiple FAR and DFARS clauses, including those on subcontracting, equal opportunity, employment eligibility verification, and sustainable products, with no option periods or additional CLINs specified. The contract imposes a zero variance in quantity, and no preservation or special handling requirements beyond packaging and labeling are indicated.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 17 hours ago

DEADLINE

More opportunities from Department Of Defense → 0410 Aq Hq Contract

Same awarding agency

UTV Maintenance and Inspection Services

POSTED

DEADLINE

UTV Safety and Compliance Equipment Supply

Sporting and Athletic Goods Manufacturing

POSTED

DEADLINE

Procurement of Extended-Bed CASEVAC-Configured UTVs

Heavy Duty Truck Manufacturing

POSTED

DEADLINE

Rental of Standard Gasoline-Powered UTVs

Passenger Car Leasing

POSTED

DEADLINE

Utility Task Vehicles (UTVs) - PanamaThe U.S. Department of Defense is seeking qualified vendors to provide six Utility Terrain Vehicles (UTVs) for a six-month rental period beginning July 30, 2026, and ending January 29, 2027, at Base Aeronaval Cristóbal in Colón, Panama. The contract requires four standard side-by-side UTVs capable of seating at least four personnel and two extended-bed models designed for two occupants with a cargo bed that can secure a litter, all of which must be no more than two years old, operate on regular unleaded gasoline, and be built for rugged off-road conditions. Vendors must deliver the vehicles fully equipped with a full fuel tank, two keys, and essential safety gear including a fire extinguisher, first aid kit, and reflective triangle, and assume full responsibility for transportation to and from the site. Maintenance is the contractor’s obligation throughout the rental period, with a requirement to provide replacement vehicles within three days if any unit becomes inoperable. All UTVs must be covered by full-coverage insurance compliant with Panamanian law, and all personnel involved must have cleared background checks through local authorities. The solicitation, identified as W912CL-26-Q-A026, is a firm-fixed-price contract with no set-aside, falling under NAICS code 532284 and PSC W023. Proposals are due by July 22, 2026, at 3:00 PM Central Time, with questions due the prior week. Performance must begin punctually on July 30, 2026, and offerors must demonstrate clear capability to meet this critical start date, as it is a key evaluation factor. The contract requires strict adherence to the Performance Work Statement and regulatory addenda, including FAR clauses covering instructions to offerors and evaluation criteria. All submissions must reflect an understanding of the operational environment in Panama and the logistical demands of supporting U.S. military activities at the JOTC site, with the point of contact for inquiries listed as Craig Dogger and MAJ Vernon Shank from Fort Sam Houston, Texas.

Recreational Goods Rental

POSTED

DEADLINE

PANAMAX 2026, CJTF Main Rental VansThe contract requires a 14-day rental of 16 passenger vans, each with a seating capacity of 15, for use in and around Fort Bragg, North Carolina, with performance strictly limited to the period of August 1–15, 2026. All vehicles must be 2023 model year or newer, equipped with four doors, and powered by gasoline or diesel fuel. The contractor must be located within a 10-mile radius of the Mission Training Complex at N-3627 Blackjack St, Fort Bragg, NC, and must have all vehicles ready for pickup no later than 0800 ET on August 1, 2026. Full coverage insurance is mandatory, and the contractor is responsible for all scheduled and unscheduled maintenance, repairs, and replacement vehicles to ensure uninterrupted service throughout the contract period. Each van must be delivered in clean, fully operational condition with a full tank of fuel and equipped with standard safety items including a fire extinguisher, first aid kit, and reflective triangles. The requirement is open without set-aside restrictions under NAICS code 532111, with responses due by July 23, 2026, and the contract is managed by the Department of Defense through the Office of Contract in Fort Sam Houston, Texas.

Passenger Car Rental

POSTED

DEADLINE

in about 10 hours

Proposed Contract Action SynopsisThe contract, issued by the Department of Defense and managed through the contracting office located at Soto Cano Air Base in Honduras, involves the procurement of specialized equipment consisting of four 26-ton pneumatic lifting bags accompanied by a control console. This purchase order, with a proposed solicitation number W912QM-25-Q-0057, is intended to be awarded to a single source, specifically AGE Logistics Corporation, with a total contract value of $525,780. The contract performance is designated to take place in Comayagua, Honduras, and no set-aside status is applied to this acquisition. The solicitation was posted on September 23, 2025, and the contract award date remains to be determined. The action code for this procurement is a purchase order, and the associated product or service code is 1680, which aligns with the manufacturing and supply of lifting equipment. Key contacts for this contract include Yesica M. Valladares, the contracting officer, and CPT Christopher Lucero, who can address inquiries regarding this acquisition. The acquisition falls under NAICS code 336413, further identifying the nature of the product category. This acquisition supports operational requirements in Honduras, ensuring the government obtains necessary equipment through a streamlined single-source procurement method.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Expeditionary Packaging and Crating for Military ShipmentThis contract involves the design and supply of robust shipping crates that meet the MIL-STD-2073 standard for military packaging. The crates are specified to accommodate sizeable system components, with examples measuring approximately 72 by 34 by 57 inches. Their purpose is to ensure the secure transport of these components from Comayagua, Honduras, to Charleston Air Force Base in South Carolina. The contract is categorized under the NAICS code 322220, related to paper bag and coated and treated paper manufacturing, which may reflect the packaging materials involved. Issued by the Department of Defense, specifically the agency referenced as “0410 Aq Hq Contract,” this subcontract targets expeditionary packaging and crating needs for military shipments. The place of performance is designated as Comayagua, with logistics extending to a U.S. military base, emphasizing the importance of durability and compliance for transport and handling during military operations.

Paper Bag and Coated and Treated Paper Manufacturing

POSTED

DEADLINE

Protective Pads and Repair Kit SupplyThe contract involves the supply of four protective rubber pads and one field repair kit designed to support the maintenance of pneumatic lifting modules used in expeditionary environments. This procurement is managed as a subcontract by the Department of Defense, specifically through the 0410 Aq Hq Contract office. The requirement is aligned with the NAICS code 326299, which corresponds to the manufacture of other rubber products. The place of performance is established in Comayagua, and the contract was posted on September 11, 2025. The materials provided under this agreement are critical for ensuring operational readiness and durability of equipment deployed in challenging field conditions, emphasizing the importance of quick and effective onsite maintenance capabilities. No specific set-aside provisions or additional organizational details were provided within the contract data.

All Other Rubber Product Manufacturing

POSTED

DEADLINE

Pneumatic Module and Hose Assembly SupplyThe contract entails the supply of five pneumatic lifting modules and fifteen hose assemblies designed for integration into an aircraft recovery system. These components are required to meet stringent high-pressure specifications and demonstrate durability suitable for field operations, ensuring reliable performance under demanding conditions. The procurement supports the enhancement of military equipment capabilities through robust and high-quality pneumatic technologies. Issued by the Department of Defense under the NAICS code 332997, the subcontract is set to be performed in Comayagua. While some administrative details such as solicitation number and point of contact are not specified, the contract underscores a focus on specialized manufacturing within the metal valve and fittings industry. The acquisition reflects a critical effort to maintain and upgrade essential recovery system components to support military readiness and operational efficiency.

Industrial Pattern Manufacturing

POSTED

DEADLINE

Pneumatic Control Console ManufacturingThis contract involves the fabrication and assembly of a military-spec pneumatic control console designed to include key features such as pressure regulation, moisture filtration, and a Class 1 gauge. It specifically incorporates the National Stock Number (NSN) 1730-01-305-6846, indicating that the product meets standardized military specifications. The contract falls under NAICS code 332996, which relates to the manufacturing of metal valve manufacturing, reflective of the specialized nature of the equipment. The subcontract is issued by the Department of Defense, identified by the agency code 0410 Aq Hq, and the work will be performed in Comayagua, with the postal code 12101. Although solicitation details and set-aside status are not specified, the contract is clearly focused on producing a precision pneumatic control console for military applications, supporting operational readiness and equipment reliability.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

Pneumatic Lifting System Design and IntegrationThis contract involves the engineering, design, and integration of a high-capacity pneumatic lifting system intended for controlled aircraft recovery operations in field conditions. The system must be capable of lifting loads up to 52,000 pounds, with an adjustable lifting range between 24 and 120 inches, ensuring versatility and operational efficiency in challenging environments. The contract is classified as a subcontract under NAICS code 333994 and is being managed by the Department of Defense through the 0410 Aq Hq Contract office. The work is to be performed in Comayagua, with the postal code 12101. This project emphasizes advanced pneumatic technology to support military recovery missions, highlighting the need for robust and reliable lifting solutions in the field.

Industrial Process Furnace and Oven Manufacturing

POSTED

DEADLINE