This Solicitation opportunity from Government of Canada was posted on March 27, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Aircraft replacement parts

Closed

W8485-269295International

Submission Closed03/27/2026, 02:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE4A7-26-T-650C

This solicitation from the Department of Defense, specifically the ASC Supplier Oper AE and AF Div, is for the procurement of one guide pin under part number 1450-01-657-8395. The contract requires delivery within 117 days after receipt of order. The solicitation was posted on August 12, 2026, with a response deadline of August 20, 2026, and is categorized under NAICS code 336419. A critical component of this contract is the strict export control of technical data under ITAR and EAR regulations. Access to this data is restricted to DLA contractors who possess an approved US/Canada Joint Certification Program certification and have completed the required training and questionnaires. Compliance with DFARS 252.225-7048 is mandatory, as the technical data cannot be exported or disclosed to foreign persons without prior authorization from the Department of State or Department of Commerce.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

GOVERNMENT FIRST ARTIC

Solicitation # SPE8E6-26-T-4225

This solicitation, issued by the Defense Logistics Agency under number SPE8E6-26-T-4225, is for the procurement of 14 units of part number 0001S00000052. The contract requires delivery within 215 days after receipt of the order. The primary focus of the technical requirements involves the submission and review of Production Lot Test reports, which must be presented to the Quality Assurance Representative for approval. To ensure compliance, all shipments of Production Lot Test reports must be accompanied by specific documentation, including DD Form 1222, DD Form 250 or iRAPT receiving reports, a copy of the contract, and all applicable test reports showing actual results against technical data package tolerances. Additionally, the contractor must provide material and process certifications, inspection method sheets, and the drawings used during manufacture.

Defense Logistics Agency

POSTED

DEADLINE

MMIII Support Assembly FR

Solicitation # SPRHA2-26-R-0008

This contract, solicitation SPRHA2-26-R-0008, is a full small business set-aside under FAR 19.5 for the procurement of 40 units of NSN 1420-00-435-1313, identified as the MMIII Support Assembly, issued by the Department of Defense through DLA Aviation at Hill Air Force Base, Utah. The acquisition is structured as a firm fixed-price negotiated request for proposal with two bid options: Bid A requires first article testing and submission of a 39-unit production lot, while Bid B allows eligible vendors with prior contract history within 36 months to waive first article requirements and bid on a 40-unit production lot. The delivery deadline for all units is October 15, 2026, with shipments to be made F.O.B. destination to the government facility at Hill AFB, Utah, adhering to strict military packaging standards including MIL-STD-2073-1E, MIL-STD-129R with Code 39 barcodes, and MIL-STD-147 for palletization, along with proper DD Form 1574 tagging and hazardous material handling per DoD regulations. The offeror must comply with extensive documentation requirements including supply chain traceability, test reports, material certifications, first article test reports, and engineering data per Attachment A, underpinned by compliance with NIST SP 800-171 cybersecurity measures, DFARS 252.204-7012 for defense information safeguarding, and the Federal Acquisition Supply Chain Security Act. All pricing must remain firm for 120 days, and payment processing is mandatory through the Wide Area WorkFlow system with SAM registration required. Evaluation is heavily weighted toward price, with first article testing costs estimated at $3,000, and the government will assess supplier performance using the Supplier Performance Risk System, including NIST assessment scores. The contractor must also affirm compliance with Buy American, Trade Agreements, and anti-trafficking regulations, and is bound by FAR and DFARS clauses addressing disputes, changes, bankruptcies, subcontracting, liability, and contract administration. Proposals are due by July 13, 2026, and must clearly designate Bid A or Bid B with full supporting documentation to be considered responsive.

Ut DLA Aviation At Ogden

POSTED

DEADLINE

All Up Round plus Canister Simulator (AURCS)

Solicitation # 45-0268

The Naval Undersea Warfare Center Division Newport is seeking industry input through a Request for Information to assess capabilities for the future fabrication of the All Up Round plus Canister Simulator, a complex developmental system requiring advanced manufacturing, precision machining, and stringent welding standards. Respondents must demonstrate the capacity to handle large, heavy components with detailed facility infrastructure including lifting and assembly capabilities, along with proven expertise in large-scale precision machining and welding that meets strict military specifications. The future contract effort would involve producing a First Article Unit for validation through Manufacturing Readiness Review and Physical Configuration Audit, followed by recurring production of AURCS units and associated Peculiar Support Equipment, plus ongoing engineering change management and supply chain obsolescence mitigation. The government will provide the Technical Data Package and Statement of Work upon solicitation but currently seeks evidence of industry readiness through a white paper response no longer than ten pages, complemented by supporting visuals. Companies responding must provide a comprehensive company profile including CAGE code, UEI, size classification under NAICS 336419, and point of contact details, while explicitly addressing five key capability areas: facility infrastructure for handling heavy components, precision machining experience with tight tolerances on large assemblies, welding program certification and NDT inspection capabilities, ability to meet aggressive production schedules, and relevant past performance in naval or submarine-related fabrication projects. Two government contract references are required, and proprietary information must be clearly marked. All responses are due by August 14, 2026, submitted via email to designated Navy points of contact. Importantly, this RFI is not a solicitation, does not obligate the government to award a contract, and respondents bear all costs associated with their submission. Access to controlled attachments, including the draft Statement of Work and background slides, requires a SAM.gov role and formal request with justification, and all received information will be handled as Controlled Unclassified Information.

Nuwc Division Newport

POSTED

DEADLINE

Ground-Based Launcher Request for Information (RFI)

Solicitation # FA8612_RFI_C3BM_2026_0002

The Air Force Life Cycle Management Center’s Command, Control, Communications, and Battle Management Directorate at Wright-Patterson Air Force Base in Ohio is conducting market research through a Request for Information to explore potential industry capabilities for a Ground-Based Launcher. This RFI, identified by solicitation number FA8612_RFI_C3BM_2026_0002, is strictly for gathering information and does not represent a solicitation for proposals, nor does it obligate the government to initiate a contract or issue a future Request for Proposal. Responses are due by August 7, 2026, and submissions must align with the North American Industry Classification System code 336419. The opportunity is not set aside for any specific business size or veteran-owned category, and the government is not accepting unsolicited proposals at this stage. All inquiries and submissions should be directed to the designated point of contact, Christopher Core, with Heather Bakker available as a secondary contact for clarification. The response must be submitted through the SAM.gov portal linked in the official posting, and interested parties are advised to review all provided documentation for detailed technical expectations and requirements.

FA8612 Aflcmc C3BM C3

POSTED

DEADLINE

59--HEATER,THERMAL RELEASE

Solicitation # SPE7M526T384R

The U.S. Department of Defense, through DLA Land and Maritime, is soliciting quotes for 72 thermal release heaters under NSN 5999005387278, to be delivered to W1A8 DLA DISTRIBUTION within 168 days of award. The solicitation, identified as SPE7M526T384R and posted on August 6, 2026, is an open, unrestricted RFQ with a response deadline of August 17, 2026. Only electronic submissions are accepted, and hard copies are not available; all quotes must be submitted through the designated online portal. The approved source for this item is 27192 9104H3968, and no specifications, plans, or drawings are provided. The contract falls under NAICS code 336419 and is managed from the office located in Columbus, Ohio. Interested vendors must obtain the full solicitation document via the online link provided, and inquiries should be directed to the designated point of contact via email, as no other contact methods are listed.

DLA Land And Maritime

POSTED

DEADLINE

Solicitation # SPE4A6-26-R-0265

The U.S. Department of Defense, through DLA Aviation, is soliciting a firm fixed price contract for 211 units of Probe Assembly with NSN 6610-000649349, specifically for use on the Stratolifter C/KC aircraft, as designated by WSDC 05F. The only approved source for this item is Aerosonic LLC, with part number 123-0071, and the procurement is being conducted under Other Than Full and Open Competition as authorized by 10 U.S.C. 2304(c)(1), due to the exclusive nature of the part. Delivery is required within 185 days after receipt of order, with inspection and acceptance occurring at the destination point under FOB terms. The contract award will consider price, past performance, and other evaluation criteria as outlined in the formal solicitation, and the Higher-Level Contract Quality Requirement clause applies. No alternate or substitute products will be accepted unless the offeror provides complete technical data to demonstrate full equivalence to the specified part, and all offerors must meet qualification standards at the time of award. The solicitation, numbered SPE4A626R0265, will be issued on or about August 4, 2026, and responses are due by September 3, 2026. Interested parties may submit proposals within forty-five days of this notice’s publication, though no competition is guaranteed, and the government retains sole discretion to proceed without competition based on responses. This acquisition does not follow commercial item procedures under Part 12, but vendors may still indicate within fifteen days if they can provide a commercial item meeting the requirement. All solicitation documents will be available exclusively via the DIBBS website in PDF format, requiring Adobe Acrobat Reader for access; no paper copies will be provided. The primary point of contact for inquiries is Melinda Clayton of DLA Aviation in Richmond, Virginia, reachable by phone or email, with Lionel Allamby listed as a secondary contact.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Flight Data Transmitter (FDT) Phase III

Solicitation # FA8128

The Elevon Actuator Controller Phase III contract, identified by solicitation number FA8128-26-D-B002, is a justification document issued by the Department of Defense through the Air Force Life Cycle Management Center at Tinker Air Force Base in Oklahoma. The contract is designated under NAICS code 336419, which corresponds to aircraft engine and engine parts manufacturing, indicating the technical nature of the deliverables related to advanced flight control systems. The primary point of contact is Natalie Stokely, reachable via email and phone, and the work is expected to be performed at Wright-Patterson Air Force Base in Ohio, reflecting a collaboration between development and operational testing facilities. Although the specific financial terms and technical specifications are redacted, the contract’s purpose is to advance the capability of elevon actuator controllers, likely supporting next-generation aerospace platforms. The solicitation was posted on July 8, 2026, and is classified as a justification rather than a competitive award, suggesting a sole-source or non-competitive procurement rationale has been formally documented.

POSTED

DEADLINE

HEATER, THERMAL RELEASE

Solicitation # SPE7M1-26-U-4880

Solicitation SPE7M1-26-U-4880 is a total small business set-aside issued by the Department of Defense Maritime Supply Chain for the procurement of 74 thermal release heaters, identified by NSN 5999-00-504-9617. This is a unilateral indefinite delivery contract with a maximum ceiling of 350,000 dollars and no guaranteed purchase obligation. The required delivery timeline is 118 days after the date of award with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The contract mandates strict adherence to MIL-STD-2073-1E for packaging, utilizing dry preservation with desiccant and corrosion inhibiting paper, and MIL-STD-129 for shipment marking. Special material restrictions prohibit the intentional addition of mercury, except for specific functional uses approved by NAVSEA. Contractors must comply with DFARS 252.223-7001 regarding hazardous material labeling and the submission of Safety Data Sheets. Administrative requirements include electronic invoicing via Wide Area WorkFlow and compliance with NIST SP 800-171 assessment requirements. Proposals must be submitted through the DIBBS portal by August 19, 2026.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Kuwait Deferred OPTEMPO Spares, Sole Source to Raytheon

Solicitation # SPRRA2-26-R-0079-AMD

This contract, issued under solicitation number SPRRA2-26-R-0079-AMD and amended as AMD 001, is an 8(a) Sole Source award to Raytheon for the procurement of spares and components critical to military communication and control systems. The solicitation was originally posted on May 27, 2026, with an initial response deadline of July 7, 2026, which was extended to August 8, 2026, before the final due date of August 14, 2026. The contract is managed by the Defense Logistics Agency Aviation at Redstone Arsenal, Alabama, with performance required in Andover, Massachusetts. The award is structured under a sole source authority granted by FAR 19.8, confirming the offeror's qualification under the Small Business Administration’s 8(a) Business Development Program, though no specific UEI or CAGE code is provided. The scope of work involves supplying ruggedized digital systems, missile guidance consoles, lightning arresters, cabling, and related hardware, with quantities outlined across two contract line items but without specified unit or total prices, rendering the estimated contract value unobtainable. Delivery is to be made to Andover, Massachusetts, under an undetermined period of performance and without defined FOB terms. The contract lacks explicit provisions for inspection and acceptance criteria, packaging and marking standards compliant with MIL-STDs, payment or invoicing mechanisms, contracting officer representation details, and specialized requirements such as security clearances, key personnel qualifications, options, or organizational conflict of interest mitigations. The technical specifications include part numbers and item descriptions, but no performance standards, test protocols, or governing technical specifications are cited, suggesting the document primarily serves as a procurement schedule rather than a complete statement of work.

Al DLA Aviation At Huntsville

POSTED

DEADLINE

REQUEST FOR INFORMATION (RFI) Fair Share Sustainment Operations (FSSO) HAWK Missile System.

Solicitation # W314Q-R-27-A046

The U.S. Army Contracting Command – Redstone Arsenal is issuing a Request for Information (RFI) to identify qualified vendors capable of providing total system performance responsibility and comprehensive sustainment services for the Homing All Way Killer (HAWK) Missile System. This sources-sought notice, identified by solicitation number W31P4Q-27-R-A046 and NAICS code 336419, supports market research for a potential future acquisition under the Fair Share Sustainment Operations (FSSO) and Contract Logistics Services (CLS) programs. The government seeks firms with proven experience in logistics, engineering, material supply, test and product assurance, configuration management, technical documentation, and field support for HAWK missiles and associated Ground Support Equipment (GSE), including integration with Sentinel, NASAMS, and SHORAD systems. Support is required for Foreign Military Sales (FMS) and Building Partner Capacity (BPC) partner nations, as well as for U.S. Government-owned contractor-operated facilities at White Sands Missile Range, including the HAWK Support Center and Theater Readiness Monitoring Facility. Responses will inform the Army’s acquisition strategy and are not intended to commit the government to a contract or procurement. Interested firms must submit a statement of qualifications including their name, address, unique entity ID, CAGE code, verified SAM registration status, business size designation, and detailed evidence of expertise supporting HAWK systems, such as prior contract history with scope, quantity, contract numbers, and point of contact details. The performance work statement containing Controlled Unclassified Information is not included in the public notice and must be requested formally via email with a brief qualifications narrative. All submissions must be received by August 23, 2026 at 1:00 p.m. EST to Michael Weaver at micheal.e.weaver.civ@army.mil. This RFI is purely for planning purposes; no payment, obligation, or formal solicitation is implied by submission, and responses will not be treated as bids or proposals. Participation in this RFI does not guarantee eligibility for any future request for proposal, which will be independently posted on SAM.gov should it be issued.

POSTED

DEADLINE

Precision Aerospace Machining and FabricationThe contract involves the precision manufacturing of a bomb bay door fairing designated by NSN 1560010707747, a mission-critical component for military aircraft that demands high-accuracy machining, sheet metal forming, and final assembly under stringent aerospace quality requirements. The work must comply with industry-specific standards to ensure structural integrity, aerodynamic performance, and operational reliability under extreme conditions, with no tolerance for deviation in dimensional control or material specifications. This is a subcontract issued under the Defense Logistics Agency’s Department of Defense procurement system, categorized under NAICS code 336419 for other aerospace product and parts manufacturing, with performance expected to meet stringent military and aerospace compliance guidelines. The contract was posted on July 21, 2026, and the award is linked to the DIBBS system under contract number SPE4A726P4818, indicating a formal procurement pathway within the defense supply chain. All work must be executed with traceability, documentation rigor, and adherence to defense-grade quality assurance protocols without deviation.

Defense Logistics Agency

POSTED

23 days ago

DEADLINE

N/A

General Info

Agency

Government of Canada → Department of National DefenceView Agency

NAICS

336419 - Other Guided Missile and Space Vehicle Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

*Canada *Alberta, CAN

Set-Aside

NONE

Documents

(3)

W8485-269295 - RFP FR.pdf

PDF

W8485-269295 - RFP EN.pdf

PDF

w8485-269295---rfp-en.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedMar 27

Solicitation

Response DeadlineMar 27

Deadline has passed

Submission Closed

03/27/2026, 02:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Department of National Defence

Contacts1 person available

OfficeN/A

Organization / Agency

Government of Canada → Department of National Defence

View Agency Profile

Office AddressN/A

Contacts

Ben LeBlancPoint of Contact

contact@example.gov

+1 (555) 000-0000

Full Description

***NOTICE OF PROPOSED PROCUREMENT – W8485-269295/A*** The Department of National Defence has a requirement for the item detailed below. The delivery is requested at the Supply Depot indentified below. Item 1 GSIN: 1630 NSN: 1630-01-320-4502, Lining Friction Part No.: 5006350-2 NCAGE: 0B9R9 Quantity: 800 Unit of Issue: Each/Set From FCA Plant to 7 CFSD Edmonton Materiel is used on the Canadair CT-114 Tutor aircraft. Bidders proposing an Equivalent or a Substitute Product must indicate the Part Number and the NCAGE they are offering. The Crown retains the rights to negotiate with suppliers on any procurement. The requirement is subject to the provisions of the following Trade Agreement: Canadian Free Trade Agreement (CFTA). Barring any other conditions or international sanctions, Canadian Suppliers, Suppliers of an Applicable Trading Partner and Suppliers of a Non-Trading Partner, are eligible for this solicitation of offers. Documents may be submitted in either official language of Canada.