Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Aircraft Structural Component Manufacturing

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the full production of six structural aircraft components, encompassing all stages from fabrication and assembly to inspection and final delivery, executed in two distinct phases. Each component must meet stringent quality standards and comply with origin inspection requirements to ensure compliance with defense specifications. The work is classified as a subcontract under the NAICS code 336411, which pertains to aircraft component and accessory manufacturing, and is managed by the Defense Logistics Agency under the Department of Defense. All delivered parts must be traceable and verified through approved inspection protocols, with performance expectations aligned to defense-grade reliability and precision. Delivery timelines and phase milestones are tightly controlled to support programmatic needs, though specific locations for performance and point of contact details are not provided in the available data.

General Info

Six aircraft components produced in two phases to defense specs, traceable, inspected, delivered per DLA contract.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

336411 - Aircraft ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-26-T-746M.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SUPPORT, STRUCTURAL

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 16

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Full production of six structural aircraft components including fabrication, assembly, inspection, and delivery in two phases. Must comply with quality standards and origin inspection requirements.

Similar Contracts

Same NAICS industry code

HARNESS, CARRYING, OXYGE

Solicitation # SPE4A7-26-T-678C

DLA Aviation is soliciting quotes for the procurement of 388 oxygen carrying harnesses under solicitation number SPE4A726T678C. The items are identified by NSN 1660005712239 and are to be delivered to DLA Distribution Warner Robins within 169 days after the order is placed. This opportunity is designated as a total small business set-aside under NAICS code 336411. Interested parties must submit their quotes electronically by the deadline of August 26, 2026. The solicitation is available exclusively online, and any necessary digitized drawings or military specifications must be retrieved electronically. All inquiries regarding this procurement should be directed to the buyer via the DLA Dibbs portal or the provided email contact.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

SHAFT, BUTTERFLY, VAL

Solicitation # SPE4A1-26-T-2542

This solicitation is for the procurement of 12 butterfly valve shafts under NSN 1660-00-628-2772 for the Department of Defense Aviation Supply Chain. The contract requires delivery within 171 days after the order is placed and will be performed at Tinker AFB. The primary point of contact for this requirement is Scott Brunner. The agreement is subject to several technical and quality requirements, including DLA packaging standards, tailored higher level quality requirements, and configuration change management protocols. While Item Unique Identification is not required by the service customer, the contract does mandate compliance with covered defense information regulations. Alternate offerors must provide a complete data package for both approved and alternate parts.

AVIATION SUPPLY CHAIN

POSTED

DEADLINE

LOCK PIN ASSEMBLY, FOLD

Solicitation # SPE4A6-26-T-20XF

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE4A5-26-T-377J

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

VALVE ASSEMBLY, ENVI

Solicitation # SPE4A5-26-T-377B

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

PLATE, CENTERING BEARIN

Solicitation # SPE4A7-26-T-678R

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Solicitation # SPE7LX-26-U-9167

Solicitation SPE7LX-26-U-9167 is an Indefinite Delivery Contract issued by the Department of Defense Strategic Acquisition Program Directorate for the procurement of gaskets, identified by NSN 5330-01-168-1813. The requirement is for an estimated annual quantity of 57 units, with a guaranteed minimum of 8 units upon the issuance of the first delivery order. The contract has a maximum value of 350,000.00 dollars. Delivery is required 78 days after the date of order, with terms set as FOB Origin. Inspection and acceptance will occur at the destination. The contractor must adhere to strict packaging and marking standards, including MIL-STD-2073-1E, MIL-STD-129, and MIL-DTL-117 for UV-sensitive materials. A critical technical requirement is the total prohibition of asbestos as defined in FED-STD-313. Hazardous materials must be labeled according to 29 CFR 1910.1200 and DFARS 252.223-7001. Invoicing must be processed electronically via Wide Area Workflow. Proposals are due by August 18, 2026, and must be submitted through the DLA Internet Bid Board System.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

in about 15 hours

SCREW AND PIN ASSEMBLY

Solicitation # SPE4A7-26-T-681J

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

ADAPTER, AIR INLET, HEAT

Solicitation # SPE4A6-26-T-20VP

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE4A5-26-T-379H

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

PLUG, SIGHT GLASS

Solicitation # SPE4A7-26-T-680H

DLA Aviation is soliciting quotes for the procurement of sight glass plugs under NSN 1615013089451. The requirement is divided into three lines, totaling 165 units, all to be delivered to DLA Distribution Corpus Christi, Texas. Delivery timelines vary by line, ranging from 60 to 408 days after order. This opportunity is a total small business set aside under NAICS code 336411. Interested responsible sources must submit their quotes electronically by the deadline of August 27, 2026. All inquiries and submissions should be directed through the specified DLA electronic channels.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

SLEEVE, STRAINER

Solicitation # SPE4A6-26-T-15DV

This contract is for the procurement of five strainer sleeves, identified by NSN 1615-01-240-5451 and Sikorsky part number 65394-07021-102. This is designated as a critical application item with a delivery window of 171 days after order. The items are to be delivered FOB Origin with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The agreement incorporates several DLA Master List technical and quality requirements, including CMMC Level 2 self-assessment, covered defense information protocols, and specific packaging standards such as ASTM D3951 and MIL-STD-129. Because the item contains restricted technical data not releasable to foreign nationals, vendors must complete specific authorization forms. Additionally, the contract allows for an alternate sampling plan via Sikorsky Corporation provided it meets ASQ H1331 or MIL-STD-1916 standards.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

LINER, FUEL TANK

Solicitation # SPE4A7-26-R-0714

The contract is for a liner, fuel tank item designated for use on the UH-60 helicopter, identified by NSN 1560-011215115 and part number 70211-03010-105, manufactured in full compliance with drawing 78286 70211-03010, revision K dated November 30, 2017. This procurement is structured as an indefinite quantity contract with a two-year base period and no options, issued as a total small business set-aside, with an estimated annual requirement of 80 units. All delivery of production units must be completed within 300 days of order placement, with FOB origin terms and inspection and acceptance performed at the manufacturer’s location. Access to technical data associated with this item is restricted to contractors certified under DOD 5220.22M, requiring submission of DD Form 2345 to the Defense Logistics Information Service to gain authorization. The solicitation, numbered SPE4A726R0714, will be made available exclusively through the DLA Internet Bid Board System on or about August 20, 2026, with proposals due by September 21, 2026. No paper copies will be distributed, and potential bidders must use the latest Adobe Acrobat Reader to access the PDF solicitation documents. The contracting office is located in Richmond, Virginia, with primary point of contact Ryan Loeffelholz.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

in about 1 month

Packaging, Palletizing & FOB-Origin Logistics

Other Warehousing and Storage

POSTED

DEADLINE

in about 15 hours

Hazardous Materials Compliance & Labeling Services

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

in about 15 hours

Special-Purpose Electrical Cable Assembly Manufacturing

Current-Carrying Wiring Device Manufacturing

POSTED

DEADLINE

in about 15 hours

Cybersecurity Compliance (NIST SP 800-171 Assessment & Reporting)

Computer Systems Design Services

POSTED

DEADLINE

in about 15 hours

Hazardous Materials Compliance & SDS Management

Environmental Consulting Services

POSTED

DEADLINE

in about 15 hours

Military-Grade Packaging and Marking Services

POSTED

DEADLINE

in about 15 hours

Precision Valve Manufacturing – Linear Directional Control Valve

Industrial Valve Manufacturing

POSTED

DEADLINE

in about 15 hours

Butterfly Valve Manufacturing and Supply

Industrial Valve Manufacturing

POSTED

DEADLINE

CMMC Level 2 and NIST SP 800-171 Compliance Support

Computer Systems Design Services

POSTED

DEADLINE

in about 15 hours

Domestic Freight Delivery to DLA New Cumberland

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

in about 15 hours

Military-Compliant Packaging, Labeling, and Hazard Communication

Other Warehousing and Storage

POSTED

DEADLINE

in about 15 hours