Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 14 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

This Government Contract opportunity from Department Of Defense was posted on August 26, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Airside (Tarmac/Runway) Snow and Ice Control Services

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 561730
New
Dorm and Common Area Landscaping
Solicitation # 26-137
Solicitation 26-137 is a subcontracting opportunity issued by Adams and Associates, Inc. for the Atterbury Job Corps Center in Edinburgh, Indiana. The project requires comprehensive landscaping, tree trimming, bush and shrub maintenance, and building beautification services for several facilities, including the Administration, Welcome Center, Academics, and various dorms such as MLK, ABL, LBJ, and Rosa Parks. The scope involves an immediate beautification effort followed by quarterly revisits to ensure grounds remain clean, safe, and professional. Work must commence within 14 days of the Notice to Proceed and includes a one-year workmanship guarantee. This is a small business set-aside opportunity where award is based on best value rather than lowest price. Evaluation criteria are weighted by price at 60 percent, quality at 20 percent, past performance at 10 percent, and schedule at 10 percent. Bidders must attend a mandatory site visit on October 2, 2026, and submit typed proposals on company letterhead by October 12, 2026. Required documentation includes a lump sum cost, a valid Indiana Contractor's License, a W9, a completed vendor questionnaire, and proof of insurance, including automobile liability and workers compensation. Contractors must comply with EPA and OSHA regulations, as well as Davis Bacon Act wage rate decisions. Payment terms are Net 30, with final payment contingent upon the submission of certified payroll records, a completed SF 1413, and the release of liens. All work must adhere to state and local codes, with Indiana regulations prevailing if they are more stringent than federal standards.
Adams & Associates, Inc.

POSTED

about 13 hours ago

DEADLINE

in 9 days
NAICS: 561730
New
Dorm and Common Area Landscaping
Solicitation # 26-138
Solicitation 26-138 is a subcontracting opportunity managed by Adams and Associates, Inc. for the U.S. Department of Labor to establish a comprehensive quarterly landscaping and grounds maintenance program at the Atterbury Job Corps Campus in Edinburgh, Indiana. The scope of work includes regular mowing and weed eating of all designated grassy areas, including main entrances, administrative and classroom buildings, student dormitories, dining facilities, recreational spaces, and campus boundaries. All activities must be performed in compliance with EPA and OSHA regulations, as well as state and local codes, while minimizing disruptions to campus operations. Interested vendors must attend a mandatory bid conference and site visit on October 2, 2026, at 11:30 AM to be eligible for consideration. Proposals are due by October 12, 2026, and must be submitted as a single lump sum contract with a detailed cost breakdown for labor, materials, and equipment. Award will be based on best value, with evaluation weights assigned to price (60 points), quality (20 points), past performance (10 points), and schedule (10 points). Required submission documents include a completed SF 1413, Vendor Questionnaire, W9, proof of a valid Indiana Contractor License, and certification of conformity to Davis Bacon Act Wage Rate decisions. The selected contractor must provide a sequenced construction schedule within 10 days of the Notice to Proceed and start work within 14 days. The contract requires a one-year workmanship guarantee and adherence to Net 30 payment terms. Insurance requirements include Workers Compensation and Automobile Liability coverage, with Adams and Associates, Inc. named as an additional insured. Compliance with FAR 52.222-41(g) regarding minimum wage notifications for employees is mandatory.
Adams & Associates, Inc.

POSTED

about 13 hours ago

DEADLINE

in 9 days
NAICS: 561730
New
SLED
Site Improvements & Landscaping
Dekalb County Board of Education

POSTED

about 17 hours ago

DEADLINE

in about 1 month
NAICS: 561730
New
SLED
Cul-de-Sac and Access Street Snow Removal
City of Saint Paul

POSTED

about 18 hours ago

DEADLINE

in 26 days
NAICS: 561730
New
SLED
RFP-DSI-SNOW & ICE REMOVAL FROM PUBLIC SIDEWALKS
Solicitation # 1761
City of Saint Paul

POSTED

about 18 hours ago

DEADLINE

in 28 days
NAICS: 561730
New
SLED
RFB-PW-CUL DE SAC SNOW PLOWING 2026
Solicitation # 1769
City of Saint Paul

POSTED

about 18 hours ago

DEADLINE

in 26 days
NAICS: 561730
New
SLED
Tree Removal and Stump Grinding Services
California Department of Transportation

POSTED

about 18 hours ago

DEADLINE

in 13 days
NAICS: 561730
New
SLED
Certified Tree Trimming and Pruning
California Department of Transportation

POSTED

about 18 hours ago

DEADLINE

in 13 days
NAICS: 561730
New
SLED
*SB/DVBE ONLY* IFPQ 11A4446 Tree Trimming, Pruning, and Removal Services in San Diego County
Solicitation # 11A4446
The California Department of Transportation is soliciting price quotes for tree trimming, pruning, and removal services within Caltrans District 11 in San Diego County. The scope of work includes thinning, skirting, chipping, and stump grinding for trees, shrubs, and vines, specifically those adjacent to energized and non-energized power lines along Routes 5, 8, 52, 54, 805, and 94. The contractor is responsible for providing all labor, equipment, traffic control, and disposal services. Performance is estimated to run from November 9, 2026, through November 8, 2029. The contract is restricted to certified Small Businesses, Microbusinesses, or Disabled Veteran Business Enterprises, and bidders must hold current Arborist Certification from the International Society of Arboriculture and Line-Clearance Tree Trimmer certification per OSHA 1910.269. The agreement will be awarded to the responsible bidder offering the lowest price quote, provided it does not exceed the maximum limit of 484,000 dollars. Key compliance requirements include adherence to California Labor Code Section 1776 for payroll records and prevailing wage requirements for bids exceeding 15,000 dollars. Contractors must ensure annual certification of personnel hoists and follow strict safety standards, including the use of Class II reflective wear. Payment is governed by Government Code Chapter 4.5, with a requirement that subcontractors be paid within seven calendar days of the prime contractor's receipt of payment. All quotes must be submitted by October 15, 2026.
California Department of Transportation

POSTED

about 18 hours ago

DEADLINE

in 13 days
NAICS: 561730
New
International
Heavy Snow Management (Tractor/Blower)
Region of Waterloo

POSTED

about 18 hours ago

DEADLINE

in 21 days
NAICS: 561730
New
International
Ice Control & De-icing Services
Region of Waterloo

POSTED

about 18 hours ago

DEADLINE

in 21 days
NAICS: 561730
New
International
Specialized Pedestrian Clearing & Hand Shovelling
Region of Waterloo

POSTED

about 18 hours ago

DEADLINE

in 21 days

AI Contract Overview

Show more

This subcontract for the Department of Defense involves providing specialized snow removal and chemical deicing services for US Army aviation facilities. The contractor is responsible for plowing tarmac and runway ramps using polyurethane-tipped plows and applying both preventative anti-ice and granular de-icers. To prevent aircraft corrosion and ensure safety, all operations must strictly adhere to SAE ASM 1435 and FAA Advisory Circular 150/5200-30A standards. The opportunity is a total small business set-aside under NAICS code 561730, with performance located in the 15902 zip code area. Personnel are required to have Level I OPSEC training to ensure secure operations. Interested parties must submit their responses by September 8, 2026, to support the delivery of ice-free airside environments compliant with FAA safety regulations.

General Info

DoD subcontract for Army aviation snow removal and deicing services, due September 8, 2026.

Agency

Department Of Defense → W6QK Acc-Ri-Picatinny

NAICS

561730 - Landscaping Services

Place of Performance

NJ, 15902

Set-Aside

SBA

Documents

This scope was carved out of W15QKN26QA142.

The full solicitation package (9 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Snow and Ice Removal Services in Johnstown, PA (PA051)(PA052)(PA053) - W15QKN26QA142

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QK Acc-Ri-Picatinny
ContactsNo contacts available
OfficeN/A
Organization / AgencyDepartment Of Defense → W6QK Acc-Ri-Picatinny
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Performs specialized snow removal and chemical deicing for prime contractors on US Army aviation facility projects. Plows tarmac and runway ramps using polyurethane-tipped plows; applies preventative anti-ice and granular de-icers. Adheres to SAE ASM 1435 and FAA Advisory Circular 150/5200-30A to prevent aircraft corrosion. Requires Level I OPSEC training. Delivers safe, ice-free tarmac and runway ramps compliant with FAA safety standards.

More opportunities from Department Of Defense → W6QK Acc-Ri-Picatinny

Same awarding agency

NAICS: 332992
New
Federal
M1041 9mm CCMCK Marking Cartridges
Solicitation # W15QKN-26-R-A052
The U.S. Army Contracting Command Rock Island at Picatinny, acting for the Office of the Project Manager, Maneuver Ammunition Systems, intends to issue a competitive request for proposal for the production of M1041 9mm marking ammunition. These non-lethal, reduced-energy cartridges are designed for use with the Close Combat Mission Capability Kit in M9, M11, M4, M17, and M18 weapon systems. The ammunition must leave a water-soluble color mark on target without penetrating Army Combat Uniforms or Personal Protective Equipment to allow for accurate assessment of simulated lethality. The selected contractor will be responsible for providing all materials, personnel, facilities, and equipment necessary for the manufacture, inspection, and testing of the ammunition according to government performance specifications. The government anticipates making a single award with deliveries required within 24 months of the contract award. A formal solicitation is expected around September 17, 2026, under solicitation number W15QKN-26-R-A052.
Small Arms Ammunition Manufacturing

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 561790
New
Federal
Snow and Ice Removal Services at the SGT Catalin D. Dima AFRC, 910 RAZ Ave., New Windsor NY 12553
Solicitation # W15QKN26QA180
Solicitation W15QKN26QA180 is a 100 percent Small Business Set-Aside for a Firm Fixed Price requirements contract to provide snow and ice removal services at the SGT Catalin D. Dima AFRC located at 910 Raz Avenue, New Windsor, NY. The scope of work includes all personnel, equipment, and materials necessary to perform plowing and shoveling across designated areas, specifically 153,720 square feet of plowing and 24,480 square feet of shoveling. Key performance requirements include a two-hour response time upon notification and the submission of time-stamped before and after photos for invoice verification. The contract structure consists of a 12-month base period running from December 4, 2026, to December 3, 2027, with four additional 12-month option periods. Proposals must be submitted electronically via the PIEE Solicitation Module by October 14, 2026, at 2:00 PM. Required submission documents include completed blocks 12, 17, and 30 of the SF1449, a valid Certificate of Insurance, and detailed unit and extended pricing for all contract line item numbers. Award will be granted to the responsible offeror whose proposal is most advantageous to the government, based on an evaluation of price and past performance. The contractor must adhere to Department of Labor Wage Determination 2015-4159 and follow all federal, state, and local regulations, including Army Regulation 420-1. Invoicing and payment will be processed through the Wide Area WorkFlow system.
Other Services to Buildings and Dwellings

POSTED

3 days ago

DEADLINE

in 12 days
View Details
NAICS: 332993
Federal
155mm Modular Artillery for Combat Effectiveness (MACE)
Solicitation # W15QKN26R1C5R
The 155mm Modular Artillery for Combat Effectiveness (MACE) program is a prototype project issued by the Army Contracting Command-Rock Island at Picatinny under the authority of 10 U.S.C. § 4022. The objective is to develop and qualify 155mm cargo-carrying artillery projectile prototypes featuring interchangeable lethal and non-lethal payload capabilities. These projectiles must be compatible with M777A2 and M109A7 howitzers, deliver effects at ranges of 30 km to 35 km when fired from 39-caliber systems, and maintain a standard interface for existing qualified fuzes. The government intends to award up to two Other Transaction Agreements (OTAs) to performers capable of establishing a resilient, scalable domestic manufacturing base. The project is structured in two phases, with Phase I focusing primarily on schedule and Phase II emphasizing technical performance. Key deliverables include the production of up to 115 projectiles for engineering tests, 335 for limited safety tests, and up to 1,200 IPB prototypes. To be eligible, at least one nontraditional defense contractor or nonprofit research institution must participate significantly, and at least one third of the total project cost must be funded by non-federal sources. Proposals are due by October 30, 2026, and must be submitted via SAM.gov in specific volumes, with strict page limits and formatting requirements. Access to sensitive technical data packages requires the submission of a non-disclosure agreement, a technical data request questionnaire, and a military critical technical data agreement.
Ammunition (except Small Arms) Manufacturing

POSTED

8 days ago

DEADLINE

in 28 days
View Details
NAICS: 332992
Federal
Shank 2.0 payload, training warhead, and pre-packed anti-personnel warhead
Solicitation # W15QKN-26-X-1CFG
The U.S. Army Contracting Command-Rock Island at Picatinny (ACC-RIP), acting for the Office of the Project Manager, Close Combat Systems, is conducting market research via a sources sought notice (W15QKN-26-X-1CFG) to identify potential industry partners for the production of Shank 2.0 payloads, training warheads, and pre-packed anti-personnel warheads for small Unmanned Aerial System (sUAS) platforms. The government is seeking capabilities statements from interested firms, including those in all small business set-aside categories, to evaluate their ability to manufacture these systems using the small Universal Payload Interface (sUPI) and Picatinny CLIK standards. A critical requirement is the ability to scale production capacity up to 40,000 systems per month, for which respondents must provide Rough Order of Magnitude (ROM) pricing and implementation schedules. Additionally, the government is soliciting industry recommendations to improve the Technical Data Package (TDP) for better producibility. Due to the nature of the technology, this effort is subject to strict export controls under the Arms Export Control Act and the Export Administration Act of 1979. Interested respondents must possess a facility clearance to handle classified material and submit a DD Form 2345 Militarily Critical Technical Data Agreement to access the TDP. The government intends to utilize the results of this research to solicit under Title 10 USC 4022 and 4023 authorities for prototype and experimental procurement. Submissions must include detailed company information, CAGE and UEI codes, and evidence of technical expertise regarding High Voltage Electronic Safe and Arm Device (ESAD) initiation systems and Low Energy Exploding Foil Initiator (LEEFI) or shock tube initiation chains.
Small Arms Ammunition Manufacturing

POSTED

15 days ago

DEADLINE

in 20 days
View Details
NAICS: 332993
Federal
155mm Artillery Cannister Assembly
Solicitation # W15QKN-26-X-1CJZ
The Army Contracting Command-Rock Island at Picatinny, acting for the Office of the Project Manager for Combat Ammunition Systems, is conducting a market survey under solicitation W15QKN-26-X-1CJZ to identify potential sources within the National Technology Industrial Base capable of manufacturing 155mm Artillery Cannister Assemblies. This is an informational effort for planning purposes and not a Request for Proposal. The assembly consists of four specific components: a 4140 steel payload canister, a 7075 T6 aluminum payload cover, and two clocking keys made from AISI S2 or S7 tool steel. The government is seeking sources that can scale production to at least 450 units per year by October 2027, 1,000 units per year by March 2028, and 10,000 units per year by January 2031. Interested sources must be registered in the System for Award Management and provide detailed capabilities statements, including manufacturing experience with artillery metal parts, facility descriptions, quality management certifications, and projected production capacities. Access to the Technical Data Package is restricted to Department of War and authorized contractors, requiring the submission of a signed DD Form 2345, AMSTA-AR Form 1350, and a Non-Disclosure Agreement. All provided technical data is subject to strict distribution controls, export laws, and prohibitions against reverse engineering. Inquiries regarding this requirement must be directed via email to the primary point of contact, Cameron Sacco, or secondary contact, Christopher Brown.
Ammunition (except Small Arms) Manufacturing

POSTED

21 days ago

DEADLINE

in 6 days
View Details
NAICS: 331110
Federal
Ordnance-Grade Metal Supply for 155mm CannistersThis subcontract involves the supply of ordnance-grade raw materials and specialized alloys required for the 155mm Artillery Cannister Assembly. Supporting prime contractors for the Army Contracting Command Rock Island at Picatinny, the provider must deliver certified metal stock in the form of sheets, tubes, or bars. All materials must strictly adhere to the specifications defined in the Technical Data Package and be accompanied by Mill Test Reports to verify compliance with military standards and U.S. Export Laws. The opportunity is managed by the Department of Defense under NAICS code 331110. Interested parties must submit their responses by October 8, 2026, to support the critical production of high-strength alloys and steel grades necessary for these defense projects.
Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

22 days ago

DEADLINE

in 6 days
View Details
NAICS: 332994
Federal
155mm Artillery Cannister Metal Parts ManufacturingThis subcontract involves the manufacture of precision metal components for the 155mm Artillery Cannister Assembly, supporting prime contractors for the Army Contracting Command Rock Island at Picatinny. The selected provider will be responsible for fabricating artillery metal parts according to the Technical Data Package and Combined RF Smoke drawings, with production requirements scaling from 450 to 10,000 units annually. To qualify, manufacturers must possess precision machining equipment and maintain either ISO 9001 or AS9100 certification, as well as provide DD Form 2345. The contract falls under NAICS code 332994 and is managed by the Department of Defense. Responses are due by October 8, 2026.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

22 days ago

DEADLINE

in 6 days
View Details
NAICS: 332999
Federal
Primer Feed Mechanisms (PFMs)
Solicitation # W15QKN26RA044
The U.S. Army Contracting Command - New Jersey, for the Project Manager, Combat Ammunition Systems, is seeking a contractor to manufacture, test, and deliver Primer Feed Mechanism (PFM) assemblies and associated components for the M777A2 Lightweight 155mm Howitzer. The scope includes the production of Body, Tray, and Magazine assemblies, as well as down parts such as Dog Coupler Assemblies, Magazine Primer Stops, Injector Arm Assemblies, Firing Pins, Cross Pins, and Inert Primers. The government intends to award a single, five-year Indefinite Delivery Indefinite Quantity (IDIQ) contract with Firm Fixed Price (FFP) delivery orders, featuring five one-year ordering periods from Fiscal Year 2027 through 2032. This procurement is a 100% Small Business Set-Aside. Award will be based on the best overall value, with evaluation factors prioritized by Technical capability, Price, and Past Performance. Technical evaluation focuses on manufacturing capability, production history, and quality management systems. The contractor must adhere to strict quality requirements, including first article testing and specific packaging and marking standards such as MIL-STD-129 and MIL-STD-130. While the solicitation was previously active with multiple amendments to extend deadlines and clarify pricing for the PFM spares catalog, it is currently on hold. For administrative purposes, the closing date has been extended to November 18, 2026, and proposal submission is not required until further notice.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

23 days ago

DEADLINE

in about 2 months
View Details
NAICS: 541330
Federal
FCCD-ACM-MJ Support Services
Solicitation # W15QKN-26-Q-1CAC
The U.S. Army Combat Capabilities Development Command Armaments Center is conducting market research via a sources sought notice to identify qualified engineering firms capable of providing complete life cycle engineering for various munition systems. The required services encompass the entire development process, including exploratory research, advanced engineering, experimental testing, quality evaluation, and production manufacturing. Selected contractors will provide professionals skilled in system architecture, CAD modeling, finite element analysis, embedded software development, and the creation of technical data packages to support the reliable delivery and sustainment of munition systems. Key responsibilities include performing requirements decomposition, reviewing Engineering Change Proposals, and collaborating with multi-disciplinary teams through Integrated Product Team meetings. Contractors must provide technical advice on project feasibility and risk while maintaining regular communication with project leads and supervisors. This is an informational request for capabilities statements under NAICS code 541330 and is not a formal solicitation for a contract. Interested parties must be registered in the System for Award Management and submit their qualifications to the U.S. Army Contracting Command - Rock Island by October 3, 2026.
Engineering Services

POSTED

29 days ago

DEADLINE

in 1 day
View Details
NAICS: 336413
Federal
Interchangeable Payload Module DevelopmentThis subcontract focuses on the development of interchangeable lethal and non-lethal payload modules for prime contractors supporting Army Contracting Command-Rock Island at Picatinny projects. The scope of work involves engineering modular payload inserts and electronic fuzing interfaces specifically designed for operation in GPS-denied environments, utilizing energetic materials and modular cargo housing. The project requires strict adherence to Energetic Material Qualification standards as specified in the statement of work. The successful contractor will be responsible for delivering fully functional payload modules along with comprehensive qualification reports. This opportunity is categorized under NAICS code 336413 and is managed by the Department of Defense.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 1 month ago

DEADLINE

in 28 days
View Details
NAICS: 336413
Federal
Range Extension System Development & SupplyThis subcontract with the Department of Defense, specifically the W6QK Acc-Ri-Picatinny agency, focuses on the development and supply of range extension sub-systems for 155mm projectiles. The primary objective is to extend the range of these projectiles beyond 35 km through the design and manufacture of propulsion-based or aerodynamic components. These components will utilize precision guidance and stabilization tools along with advanced composites to ensure optimal performance. The scope of work includes performing stability and range performance testing to validate the effectiveness of the systems. The contractor is responsible for delivering up to 100 alternate range extension sub-systems to prime contractors. This project falls under NAICS code 336413 and has a response deadline of October 30, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 1 month ago

DEADLINE

in 28 days
View Details
NAICS: 332312
Federal
155mm Projectile Body FabricationThis subcontract with the Department of Defense, specifically W6QK Acc-Ri-Picatinny, involves the manufacture of physical shells and bodies for 155mm cargo-carrying projectiles. The contractor is responsible for the precision machining and fabrication of projectile bodies compatible with 39-caliber platforms, utilizing CNC equipment and high-grade steel or alloy forging in accordance with provided 3D models and Technical Data Packages. All deliverables must adhere to MIL-STD-129 and CFR 49 standards. The scope of work focuses on delivering finished 155mm projectile bodies for prime contractors under the Army Contracting Command-Rock Island at Picatinny projects. The opportunity is categorized under NAICS code 332312, with a response deadline of October 30, 2026.
Fabricated Structural Metal Manufacturing

POSTED

about 1 month ago

DEADLINE

in 28 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS