Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

Alberta Innovates - Request for Proposal - Supply, Installation and Commissioning of a Three-Chamber Controlled Atmosphere Glovebox System

Active
AB-2026-06149International

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Alberta Innovates is seeking proposals for the supply, installation, and commissioning of a three-chamber controlled atmosphere glovebox system for its battery cell assembly and validation laboratory in Vegreville, Alberta. The required system must include a gas purification unit capable of maintaining ultra-low concentrations of oxygen and moisture to ensure the safe handling of sensitive battery materials and components. All equipment must carry a valid Canadian electrical certification mark, such as CSA, cULus, cETLus, or cTUVus, upon delivery. Proponents who do not currently hold these certifications must provide a detailed description of how they will obtain them and include the full cost of Canadian field certification in their proposal. The deadline for responses to this solicitation is September 22, 2026.

General Info

Alberta Innovates seeks a certified three-chamber glovebox system by September 22, 2026.

Agency

Alberta InnovatesView Agency

NAICS

333414 - Heating Equipment (except Warm Air Furnaces) ManufacturingView NAICS

Place of Performance

Vegreville, AB, CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyAlberta Innovates
Contacts1 person available
OfficeN/A
Organization / Agency
Alberta Innovates
View Agency Profile
Office AddressN/A
Contacts
Marcel WeinansIntermediate Buyer
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
InnoTech Alberta is establishing a battery cell assembly and validation laboratory at its Vegreville, Alberta facility to manufacture and test battery cells. The laboratory requires a glovebox system equipped with a gas purification unit capable of continuously removing oxygen and moisture from the enclosure atmosphere and maintaining both at ultra-low concentrations suitable for handling moisture- and oxygen-sensitive battery materials and components. Please RFP document for information.
The complete system shall carry a valid Canadian electrical certification mark upon delivery. Accepted certifications include: • CSA • cULus • cETLus • cTUVus Where certification is not currently held, proponents shall include: • Full cost of Canadian field certification; and • A description of how certification will be obtained. U.S.-only or European-only certification is not acceptable. Proposals offering Canadian certification obtained after delivery, priced separately, are acceptable.

Similar Contracts

Same NAICS industry code

NAICS: 333414
New
SLED
MoDOT KC District Woodchippers
Solicitation # MODOT KC 0000000069SL
The Missouri Department of Transportation Kansas City District is soliciting bids for the procurement of Vermeer BC1500 or equivalent woodchippers to be provided on an as needed basis. This contract will be awarded to the vendor offering the lowest and best firm fixed pricing. The agreement begins upon the notice of award and runs through September 30, 2027, with the possibility of four additional one-year renewal options. Interested parties must submit their responses by September 18, 2026.
MODOT KANSAS CITY DISTRICT

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 333414
New
DIBBS
FAN, VANEAXIAL
Solicitation # SPE8E7-26-T-3808
This contract, identified as SPE8E7-26-T-3808, is a solicitation for the procurement of eight vane axial fans, part number WA5001NH, with the National Stock Number 4140016066071. The requirement is set aside for Women-Owned Small Businesses under NAICS code 333414. Delivery is required within 111 days after the order, with a need ship date of August 31, 2026, and an original required delivery date of November 8, 2026. The items are to be delivered FOB Origin to DLA Distribution San Diego. The contract mandates strict adherence to DLA packaging and quality requirements, specifically referencing RP001 and ASTM D3951 for packaging, and MIL-STD-129 for marking and labeling. Inspection and acceptance will occur at the destination. Technical and quality requirements are governed by the DLA Master List, and the contract includes provisions for the removal of government identification from non-accepted supplies and the handling of covered defense information.
SAN DIEGO

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 333414
New
DIBBS
GUARD, FAN IMPELLER
Solicitation # SPE87-26-T-3812
This contract is for the procurement of 23 units of fan impeller guards, identified by NSN 4140015905141 and part number 13024786. The order is governed by solicitation number SPE8E7-26-T-3812 and requires adherence to technical and quality requirements set forth in the DLA Master List, including specific packaging standards under ASTM D3951 and MIL-STD-129. The items must be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with a required delivery date of September 17, 2026. Quality assurance will be managed through sampling methods consistent with MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. The contract specifies a zero percent quantity variance and mandates the removal of government identification from any non-accepted supplies. Technical specifications are based on TDP Rev A Gen 1 drawing 19200 13024786, and the delivery timeline is set at 79 days after order.
DDSP NEW CUMBERLAND FACILITY

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 333414
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7L3-26-T-224D
This contract is a solicitation for the procurement of 85 wiper rings under part number 0001S00000053 for the Department of Defense, specifically the Land Supplier Opns Vehicle Spt. The delivery timeline is set for 290 days after the order is placed, with performance located at Hill AFB. The procurement is governed by the DLA Master List of Technical and Quality Requirements, including specific standards for identification marking under MIL-STD-130N and strict packaging mandates. Because the items are susceptible to ultraviolet ray deterioration, they must be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117. The contract contains stringent regulatory requirements regarding the handling of technical data. It is subject to export controls under ITAR and EAR, meaning technical data cannot be exported or disclosed to foreign nationals without prior authorization from the Department of State or Commerce. Access to this data is limited to contractors with approved US/Canada Joint Certification Program certification and completed DLA export-control training. Additionally, the contract mandates the removal of government identification from any non-accepted supplies.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 333414
New
DIBBS
Supply of Nonimmersion Electrical Heating Elements
DDSP NEW CUMBERLAND FACILITY

POSTED

3 days ago

DEADLINE

in 9 days
View Details
NAICS: 333414
New
DIBBS
Electro Steam Generator SupplyThis subcontract involves the procurement and delivery of 15 electro steam generators, part number NG-DS150-3, for prime contractors working on DLA Troop Support projects. The units must be manufactured in strict compliance with a specific set of drawing specifications and packaged according to ASTM D3951 standards. The contract is managed by the Department of Defense through DLA Dist San Joaquin, with the place of performance located in Tracy, California. Delivery of the 15 completed units is required on an FOB Origin basis under NAICS code 333414.
DLA DIST SAN JOAQUIN

POSTED

3 days ago

DEADLINE

in 9 days
View Details
NAICS: 333414
New
DIBBS
Supply of Nonimmersion Electrical Heating Elements
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

3 days ago

DEADLINE

in 9 days
View Details
NAICS: 333414
New
DIBBS
Supplier of Nonimmersion Electrical Heating ElementsThis subcontract involves the supply of 17 nonimmersion electrical heating elements, identified by NSN 4520012329768, for prime contractors under Department of Defense DLA supply contracts. The selected provider is responsible for manufacturing or sourcing these units while ensuring strict adherence to DLA Packaging Requirements RP001. The agreement is managed by the DDSP New Cumberland Facility and specifies that delivery will be handled as FOB Destination. The performance of the contract is centered in New Cumberland, Pennsylvania, under NAICS code 333414.
DDSP NEW CUMBERLAND FACILITY

POSTED

3 days ago

DEADLINE

in 9 days
View Details
NAICS: 333414
New
DIBBS
Supply of Circulating Fans (NSN 4140015456800)
DLA DIST SAN JOAQUIN

POSTED

3 days ago

DEADLINE

in 9 days
View Details
NAICS: 333414
New
DIBBS
MASK, OXYGEN
Solicitation # SPE4A6-26-T-01NG
The U.S. Department of Defense, through the Defense Logistics Agency, has issued a solicitation for 133 oxygen masks identified by NSN 1660-01-652-7884 under solicitation number SPE4A6-26-T-01NG. This federal procurement is open for responses until July 6, 2026, with the solicitation posted on June 28, 2026. The equipment is intended for military use and falls under a federal procurement framework without a specified small business set-aside. The contract does not designate a specific place of performance or provide a point of contact, and all responses must be submitted through the DIBBS platform via the provided link. The nature of the requirement indicates a high-priority logistics need for life-supporting aviation or medical oxygen equipment within the defense supply chain.
ASC COMMODITIES DIVISION

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 333414
New
DIBBS
HEATING ELEMENT, ELECTR
Solicitation # SPE8E8-26-T-5435
Solicitation SPE8E8-26-T-5435, issued by DLA Troop Support Construction and Equipment, is a request for quotations for 17 units of non-immersion electrical heating elements, identified by NSN 4520-01-232-9768 and part numbers 571X-68045 or 571X-68045-02007. This critical application item is subject to strict technical and quality requirements as defined in the DLA Master List and requires compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. The procurement prohibits the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions. The delivery is scheduled for February 25, 2027, with a need ship date of March 1, 2027, to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Inspection and acceptance will occur at the destination. The contract incorporates various FAR and DFARS clauses, including the Buy American and Balance of Payments Program, safeguarding of covered defense information, and the use of the Wide Area Workflow system for electronic invoicing. All quotations must be submitted via the DIBBS portal, and offerors must represent that they will not provide covered telecommunications equipment or services.
DDSP NEW CUMBERLAND FACILITY

POSTED

3 days ago

DEADLINE

in 9 days
View Details
NAICS: 333414
New
DIBBS
HEATING ELEMENT, ELECTR
Solicitation # SPE8E8-26-T-5467
Solicitation SPE8E8-26-T-5467 is a request for quotations issued by DLA Troop Support Construction and Equipment for the procurement of 37 electrical nonimmersion heating elements, identified by NSN 4520016283360. The requirement is managed under NAICS code 333414 and is designated as a candidate for automated award. The need ship date is March 1, 2027, with an original required delivery date of March 15, 2027. Delivery is set as FOB Origin, with the destination and inspection point located at the DLA Distribution DSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to packaging and marking standards, requiring compliance with ASTM D3951 and MIL-STD-129, while noting that the DLA Master List of Technical and Quality Requirements takes precedence. Palletization must follow RP001 requirements. Key regulatory clauses include DFARS 252.225-7001 for the Buy American and Balance of Payments Program and DFARS 252.204-7012 for safeguarding covered defense information. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system. Offerors are prohibited from using additive manufacturing processes unless specifically authorized and must represent their status regarding covered defense telecommunications equipment.
DDSP NEW CUMBERLAND FACILITY

POSTED

3 days ago

DEADLINE

in 10 days
View Details

More opportunities from Alberta Innovates

Same awarding agency

NAICS: 334515
New
International
Alberta Innovates - Request for Quotes - (4) Single-Channel Potentiostats with Electrochemical Impedance Spectroscopy
Solicitation # AB-2026-06116
Alberta Innovates is seeking quotes for the procurement of four single-channel potentiostats with electrochemical impedance spectroscopy capability for its battery cell assembly and validation laboratory in Vegreville, Alberta. These instruments will be utilized to characterize battery materials and components by applying controlled voltage and current signals to measure electrical responses, internal resistance, and cell ageing mechanisms to support research and development activities. The solicitation, identified as AB-2026-06116, requires that all equipment carry a valid Canadian electrical certification mark such as CSA, cULus, cETLus, or cTUVus upon delivery. Suppliers must provide a certificate or listing reference with their submission, and any costs associated with obtaining Canadian certification must be included in the quoted price. The deadline for responses is September 18, 2026.
Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 334512
New
International
Alberta Innovates - Request for Quotes - Benchtop Environmental Test Chamber
Solicitation # AB-2026-06110
Alberta Innovates is seeking quotes for the procurement of one benchtop environmental test chamber to support a battery materials testing laboratory in Vegreville, Alberta. The equipment will be used to maintain battery cells at controlled temperatures during electrochemical testing and must integrate with battery cycling equipment for automated data collection and temperature control. The contract includes requirements for delivery, installation, commissioning, calibration, and operator training. A critical requirement is that the chamber must carry a recognized Canadian certification mark from an accredited body, such as cULus or cCSAus. Bidders must ensure the equipment is certified for use in Canada, or provide separate pricing for Canadian field certification if not included at delivery. The response deadline for this solicitation is September 18, 2026.
Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 518210
International
Alberta Innovates - Request for Proposal - Digital Asset Management Solution for Centralized Storage and Management of Multimedia Assets
Solicitation # AB-2026-05775
Alberta Innovates is issuing a request for proposal under solicitation number AB-2026-05775 to acquire a digital asset management solution. The goal is to implement a secure, scalable, and governed environment for the centralized storage, organization, and distribution of multimedia assets, such as design files, videos, and photographs, as part of a broader evolution of the organization's digital content and communications capabilities. The solicitation was posted on August 18, 2026, with a response deadline of September 11, 2026, at 8:00 PM. This project will be performed in Alberta, and the primary point of contact for the procurement process is Erin Sand, an Intermediate Buyer at Alberta Innovates.
Computing Infrastructure Providers, Data Processing, Web Hosting, and Related Services

POSTED

18 days ago

DEADLINE

in 6 days
View Details
NAICS: 541690
International
Alberta Innovates - Request for Proposal - Consultancy Services - Intellectual Property (IP) Audit for Alberta Innovates
Solicitation # AB-2026-05760
Alberta Innovates is seeking consultancy services to conduct a comprehensive intellectual property audit to support the establishment of a new IP Office for Alberta. The primary goal of this initiative is to create a systematic and accurate map of IP creation and ownership across the province, addressing the challenge of retaining innovation and revenue within Alberta's priority sectors, including energy transition, health sciences, artificial intelligence, and advanced materials. Under solicitation number AB-2026-05760, the selected proponent must provide a detailed methodology, a clear rationale for their approach, and a specific list of deliverables that contribute to a final audit report. The proposal must also include a qualified project team with defined roles and a detailed timeline for completion. Interested parties must submit their responses by the deadline of September 8, 2026, for work to be performed in Edmonton, Alberta.
Other Scientific and Technical Consulting Services

POSTED

19 days ago

DEADLINE

in 3 days
View Details