Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

GUARD, FAN IMPELLER

Active
SPE8E7-26-T-3812Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of 23 units of fan impeller guards, identified by NSN 4140015905141 and part number 13024786. The order is governed by solicitation number SPE8E7-26-T-3812 and requires adherence to technical and quality requirements set forth in the DLA Master List, including specific packaging standards under ASTM D3951 and MIL-STD-129. The items must be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with a required delivery date of September 17, 2026. Quality assurance will be managed through sampling methods consistent with MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. The contract specifies a zero percent quantity variance and mandates the removal of government identification from any non-accepted supplies. Technical specifications are based on TDP Rev A Gen 1 drawing 19200 13024786, and the delivery timeline is set at 79 days after order.

General Info

Procurement of 23 fan impeller guards for DLA by September 17, 2026.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

333414 - Heating Equipment (except Warm Air Furnaces) ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → DDSP NEW CUMBERLAND FACILITY
View Agency Profile
Office AddressUSA
Contacts
Kelly Mitchell
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
GUARD,FAN IMPELLER
GUARD,FAN IMPELLER
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT
DLA DURING "OPEN SOLICITATION ONLY".
TO RECEIVE A COPY OF THE DRAWING(S)<(>,<)>
FOR EBS SOLICITATIONS USE URL
HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
TDP Rev A Gen 1 IAW BASIC DRAWING NR 19200 13024786 REVISION NR A DTD 09/18/2009 PART PIECE NUMBER: P/N 13024786
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE8E7-26-T-3812
SECTION B
PR: 7015772775 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7015772775 0001 EA 23.000
NSN/MATERIAL:4140015905141
DELIVERY (IN DAYS):0079
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:08/31/2026 Original Required Delivery Date:09/17/2026
SPE8E7-26-T-3812 NSN/Part Number: 4140-01-590-5141 Quantity: 23 EA Purchase Request: 7015772775QTY: 23 Delivery: 79 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333414
New
DIBBS
FAN, VANEAXIAL
Solicitation # SPE8E7-26-T-3808
This contract, identified as SPE8E7-26-T-3808, is a solicitation for the procurement of eight vane axial fans, part number WA5001NH, with the National Stock Number 4140016066071. The requirement is set aside for Women-Owned Small Businesses under NAICS code 333414. Delivery is required within 111 days after the order, with a need ship date of August 31, 2026, and an original required delivery date of November 8, 2026. The items are to be delivered FOB Origin to DLA Distribution San Diego. The contract mandates strict adherence to DLA packaging and quality requirements, specifically referencing RP001 and ASTM D3951 for packaging, and MIL-STD-129 for marking and labeling. Inspection and acceptance will occur at the destination. Technical and quality requirements are governed by the DLA Master List, and the contract includes provisions for the removal of government identification from non-accepted supplies and the handling of covered defense information.
SAN DIEGO

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333414
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7L3-26-T-224D
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333414
New
DIBBS
Supply of Nonimmersion Electrical Heating Elements
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 333414
New
DIBBS
MASK, OXYGEN
Solicitation # SPE4A6-26-T-01NG
The U.S. Department of Defense, through the Defense Logistics Agency, has issued a solicitation for 133 oxygen masks identified by NSN 1660-01-652-7884 under solicitation number SPE4A6-26-T-01NG. This federal procurement is open for responses until July 6, 2026, with the solicitation posted on June 28, 2026. The equipment is intended for military use and falls under a federal procurement framework without a specified small business set-aside. The contract does not designate a specific place of performance or provide a point of contact, and all responses must be submitted through the DIBBS platform via the provided link. The nature of the requirement indicates a high-priority logistics need for life-supporting aviation or medical oxygen equipment within the defense supply chain.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 333414
New
DIBBS
HEATING ELEMENT, ELECTR
Solicitation # SPE8E8-26-T-5435
Solicitation SPE8E8-26-T-5435, issued by DLA Troop Support Construction and Equipment, is a request for quotations for 17 units of non-immersion electrical heating elements, identified by NSN 4520-01-232-9768 and part numbers 571X-68045 or 571X-68045-02007. This critical application item is subject to strict technical and quality requirements as defined in the DLA Master List and requires compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. The procurement prohibits the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions. The delivery is scheduled for February 25, 2027, with a need ship date of March 1, 2027, to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Inspection and acceptance will occur at the destination. The contract incorporates various FAR and DFARS clauses, including the Buy American and Balance of Payments Program, safeguarding of covered defense information, and the use of the Wide Area Workflow system for electronic invoicing. All quotations must be submitted via the DIBBS portal, and offerors must represent that they will not provide covered telecommunications equipment or services.
DDSP NEW CUMBERLAND FACILITY

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 333414
New
DIBBS
HEATING ELEMENT, ELECTR
Solicitation # SPE8E8-26-T-5467
Solicitation SPE8E8-26-T-5467 is a request for quotations issued by DLA Troop Support Construction and Equipment for the procurement of 37 electrical nonimmersion heating elements, identified by NSN 4520016283360. The requirement is managed under NAICS code 333414 and is designated as a candidate for automated award. The need ship date is March 1, 2027, with an original required delivery date of March 15, 2027. Delivery is set as FOB Origin, with the destination and inspection point located at the DLA Distribution DSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to packaging and marking standards, requiring compliance with ASTM D3951 and MIL-STD-129, while noting that the DLA Master List of Technical and Quality Requirements takes precedence. Palletization must follow RP001 requirements. Key regulatory clauses include DFARS 252.225-7001 for the Buy American and Balance of Payments Program and DFARS 252.204-7012 for safeguarding covered defense information. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system. Offerors are prohibited from using additive manufacturing processes unless specifically authorized and must represent their status regarding covered defense telecommunications equipment.
DDSP NEW CUMBERLAND FACILITY

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 333414
New
DIBBS
LIGHT, INDICATOR
Solicitation # SPE8E7-26-T-3774
Solicitation SPE8E7-26-T-3774 is a fixed-price request for quotations issued by DLA Troop Support for the procurement of 16 indicator lights, identified by NSN 6210-01-597-2159 and Perko Inc part number 0170BSD12L. The requirement specifies a delivery timeframe of 167 days after order, with an original required delivery date of February 6, 2027, and a need ship date of March 1, 2027. Shipping is established as FOB Origin, with the destination for both inspection and acceptance being the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to technical and quality standards, specifically incorporating the DLA Master List of Technical and Quality Requirements (RA001) and requiring packaging in accordance with ASTM D3951 and RP001 for palletization. All shipments must be marked and labeled per MIL-STD-129. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and receiving reports. Additionally, the procurement is subject to DFARS 252.204-7012 for safeguarding covered defense information and requires compliance with the Buy American Act and the Berry Amendment. All quotes must be submitted electronically via the DLA Internet Bid Board System (DIBBS).
DDSP NEW CUMBERLAND FACILITY

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 333414
New
DIBBS
HEATER, WATER, STEAM AND
Solicitation # SPE8E8-26-T-5490
Solicitation SPE8E8-26-T-5490 is a fixed-price request for quotations issued by DLA Troop Support Construction and Equipment for the procurement of 15 water, steam, and electric heated units. Specifically, the requirement is for Electro Steam Generator 09096, part number NG-DS150-3, covering various drawing numbers including 53, 54, 55, 67, 68, 69, 77, 78, 79, 87, and 88. The items are identified by NSN 4520016463534. Quotations were due by September 14, 2026, with a required delivery date of February 18, 2027, and a need ship date of March 1, 2027. The contract specifies delivery as FOB Origin to DLA Dist San Joaquin in Tracy, California, with both inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 and RP001, while marking and labeling must adhere to MIL-STD-129. Technical and quality requirements are governed by the DLA Master List under RA001, and the contractor must ensure the removal of government identification from non-accepted supplies per RQ011. Invoicing and payment processing are required through the Wide Area Workflow system. The procurement falls under NAICS code 333414 and incorporates various FAR and DFARS clauses, including the Buy American Act, Berry Amendment, and cybersecurity reporting requirements under DFARS 252.204-7012.
DLA DIST SAN JOAQUIN

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 333414
New
DIBBS
HEATER, FLUID, INDUSTRIA
Solicitation # SPE8E8-26-T-5423
This contract, solicitation number SPE8E8-26-T-5423, is a total small business set-aside for the procurement of eight industrial fluid heaters, identified by NSN 4420-01-306-6440 and Libby Power Systems part number 115-2343. The items are designated as critical application items and require specific attention to weld quality. The procurement is managed by the Department of Defense through the DLA Distribution DDSP New Cumberland Facility, with a required delivery date of June 30, 2027, and a delivery window of 167 days after the order is placed. The agreement mandates strict adherence to technical and quality requirements, including DLA packaging requirements, ASTM D3951, and MIL-STD-129 for marking and labeling. Compliance with Covered Defense Information and Cybersecurity Maturity Model Certification Level 2 self-assessment is required. Delivery is set as FOB Origin, with both inspection and acceptance occurring at the destination in New Cumberland, Pennsylvania. All shipping and palletization must follow the DLA Master List of Technical and Quality Requirements and specific procurement notes.
DDSP NEW CUMBERLAND FACILITY

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 333414
New
DIBBS
ROD, NONMETALLIC
Solicitation # SPE8E9-26-T-3650
Solicitation SPE8E9-26-T-3650 is a fixed-price request for quotations issued by DLA Troop Support, Construction and Equipment MRO SVC I, for the procurement of 60 nonmetallic rods. The specific requirement is for part number ZYTEL 66, measuring 0.750 inches in diameter by 8 feet, identified by NSN 4520011697691. The original required delivery date is October 28, 2026, with a need ship date of March 1, 2027. Delivery is to be made to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. A critical material restriction prohibits the intentional addition of mercury or mercury-containing compounds to the supplies. Inspection and acceptance will occur at the destination. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS), and the contractor is required to use the Wide Area WorkFlow (WAWF) system for electronic invoicing and receiving reports. The procurement is subject to various federal regulations, including the Buy American Act, the Berry Amendment, and DFARS requirements for safeguarding covered defense information.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 333414
New
DIBBS
HEATING ELEMENT, ELECTR
Solicitation # SPE8E8-26-T-5438
Contract SPE8E8-26-T-5438 is a solicitation issued by the Department of Defense, specifically DLA Distribution San Joaquin, for the procurement of 52 non-immersion electrical heating elements. These components, identified by NSN 4520-01-317-8875 and part number 15464-2, are designed for use on Model 53Vane laundry presses and must meet specifications of 440 Volts AC, 60 cycle, and 2100 Watts. The contract mandates that mercury or mercury-containing compounds shall not be intentionally added to the hardware, with specific exceptions for functional components as defined by NAVSEA. The delivery is required within 95 days after the order, with a need ship date of July 28, 2025, and an original required delivery date of January 30, 2027. Shipping is FOB Origin, with the destination and inspection point located at DLA Distribution San Joaquin in Tracy, California. Packaging and marking must comply with MIL-STD-129, MIL-STD-2073-1E, and DLA packaging requirements RP001. The solicitation also incorporates technical and quality requirements from the DLA Master List and specifies that covered defense information potentially applies under RD003.
DLA DIST SAN JOAQUIN

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 333414
New
DIBBS
HEATER
Solicitation # SPE8E8-26-T-5507
This solicitation, identified as SPE8E8-26-T-5507, is issued by the Department of Defense through the DDSP New Cumberland Facility for the procurement of 17 heaters under NSN/Part Number 4520-99-669-5075. The requirement falls under NAICS code 333414 and specifies a delivery timeline of 167 days after the order is placed. The place of performance is located in New Cumberland, Pennsylvania, and the primary point of contact for this acquisition is Alexis Selby. The contract incorporates specific technical and quality requirements as defined by the DLA Master List, including RP001 for packaging and RQ011 regarding the removal of government identification from non-accepted supplies. Quotations are due by September 14, 2026, and must be submitted via the DIBBS system. Compliance with the Buy American Act, domestic sourcing regulations, and telecommunications representations is mandatory for all bidders.
DDSP NEW CUMBERLAND FACILITY

POSTED

1 day ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

NAICS: 332111
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-T-2197
This contract is for the procurement of 15 feet of round hot rolled steel bar, specifically Steel Comp 410 with an intermediate temper and a 4.000 inch diameter. The material must be descaled overall and supplied in whole foot lengths between 10 and 12 feet. Delivery is set for 167 days after the order, with a required delivery date of November 11, 2026, and a need ship date of March 1, 2027. The items are to be delivered FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. Compliance requires strict adherence to technical and quality standards, including the provision of a Certificate of Quality Compliance and Metal Certification for every shipment. Suppliers must be listed on the Qualified Suppliers List for Distributors (QSLD) to be eligible for award. Detailed marking requirements are mandatory, including the contract delivery order number, NSN, and manufacturer details, using stamping or stenciling methods. Packaging and preservation must follow MIL-STD-129 and ASTM A700 standards.
Iron and Steel Forging

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333515
New
DIBBS
ROUND SOAPSTONE
Solicitation # SPE8E5-26-T-4267
This solicitation, identified as SPE8E5-26-T-4267, is for the procurement of 1,194 units of round soapstone under NSN 3460-01-646-9233. The contract is issued by the Department of Defense through the DDSP New Cumberland Facility, with a required delivery timeline of 167 days after receipt of order. Strict compliance with DLA packaging requirements and export control regulations is mandatory. Because the item contains technical data subject to ITAR or EAR regulations, access is limited to contractors with an approved US/Canada Joint Certification Program certification and completed DOD export-control training. All technical data must be handled according to DFARS 252.225-7048 to prevent unauthorized disclosure to foreign persons.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331491
New
DIBBS
SHEET, METAL
Solicitation # SPE8E4-26-T-2196
This contract is for the procurement of 283 aluminum alloy metal sheets, each measuring 0.100 inches thick, 48.00 inches wide, and 96.00 inches long. The material must adhere to specific technical standards, including SAE AMS-QQ-A-250/8C and ASTM B660, and must be supplied as strain hardened ALY 5052, H-32. This is designated as a critical application item, requiring strict adherence to exact dimensions with no test coupons allowed. Eligible awardees must be listed on the Qualified Suppliers List for Distributors (QSLD) or Manufacturers (QSLM). Key requirements include the provision of a Certificate of Quality Compliance with every shipment and detailed continuous identification markings on each unit, such as the contract delivery order number, NSN, and manufacturer details. Delivery is set for the DLA Distribution New Cumberland facility, with packaging and preservation requirements following MIL-STD-129 and ASTM B660.
Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 424950
New
DIBBS
BRUSH, ARTIST'S
Solicitation # SPE8E7-26-T-3814
This contract, identified by solicitation number SPE8E7-26-T-3814, is for the procurement of 36 artist brushes for the Department of Defense. The specific requirements call for Type II oil and water color brushes, Class 2 pure red sable hair, Style A round with a single taper point and a size of 13/128 inch, conforming to basic CID A-A-3191A. The items are identified by NSN 8020-00-257-0378 and must be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The agreement specifies a delivery timeframe of 32 days after order, with a required delivery date of August 11, 2026. Packaging must adhere to ASTM D3951 and MIL-STD-129, while following DLA packaging requirements for procurement. The contract is FOB Origin, with inspection and acceptance occurring at the destination. Technical and quality requirements are governed by the DLA Master List, including provisions for the removal of government identification from non-accepted supplies and the handling of covered defense information.
Paint, Varnish, and Supplies Merchant Wholesalers

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333415
New
DIBBS
COOLER UNIT, AIR
Solicitation # SPE8E8-26-T-5528
This contract is for the procurement of two air cooler units, identified by NSN 4130-01-372-2898 and part number H-4 LVR-4.0KW from Engineered Coil Company. The agreement specifies a delivery timeframe of 153 days, with a required delivery date of April 25, 2027, and a need ship date of February 15, 2027. Shipping is designated as FOB Origin, with the destination being the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to DLA packaging and marking requirements, including MIL-STD-2073-1E and MIL-STD-129. It explicitly prohibits the intentional addition of mercury or mercury-containing compounds, except for specific functional components like batteries or sensors as specified by NAVSEA. Technical and quality requirements are governed by the DLA Master List, and the contract includes provisions for the removal of government identification from non-accepted supplies and the handling of covered defense information.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 325510
New
DIBBS
EPOXY COATING KIT
Solicitation # SPE8ES-26-T-2726
This contract is for the procurement of 41 epoxy coating kits, identified by NSN 8010-01-727-1881 and part number RK-BAE-001-S. The items must be manufactured according to specific technical drawings and delivered to the DLA Distribution New Cumberland facility in Pennsylvania. Delivery is required within 67 days, with a need ship date of November 25, 2025, and an original required delivery date of January 28, 2027. The supplier must adhere to strict hazardous material standards, including the submission of Safety Data Sheets and compliant labeling per OSHA and 29 C.F.R. 1910.1200. The product has a non-extendable shelf life of 60 months, and it must be delivered with at least 85% of that shelf life remaining. Packaging and marking must comply with MIL-STD-129 and DLA packaging requirements for hazardous materials.
Paint and Coating Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 6 days
View Details
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7MC-26-Q-0428
This solicitation, issued by the Department of Defense under the DDSP New Cumberland Facility, is for the procurement of 46 cover plates for valves, identified by part number 0001S00000053. The contract requires delivery within 149 days after the order is placed. Bidders must adhere to a response deadline of September 16, 2026, for solicitation number SPE7MC-26-Q-0428. Compliance requirements are stringent, requiring CMMC Level 2 certification from a C3PAO and adherence to SAE AS9100 quality standards. Because the item involves technical data subject to ITAR or EAR export controls, contractors must have an approved US/Canada Joint Certification Program certification and have completed specific DLA export-control training and questionnaires to access the necessary technical data.

POSTED

about 6 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332313
New
DIBBS
ARMOR PLATE
Solicitation # SPE8E4-26-T-2037
The contract solicitation SPE8E4-26-T-2037, issued by the Department of Defense through the DDSP New Cumberland Facility, seeks the procurement of 10 units of armor plate identified by NSN 9535-01-737-6312 under a FOB Origin delivery term. Delivery is required within 164 days after order placement, with an original delivery date of February 5, 2027 and a need ship date of February 1, 2027. The items must be packaged in strict compliance with MIL-STD-2073-1E, palletized according to DLA Packaging Requirements RP001, and marked per MIL-STD-129 with no special marking required. Preservation is to be achieved through cling/dry methods using bulk cushioning, and the unit container must be designated as EC with an open/sealed indicator of M. Inspection and acceptance occur at the destination facility located at 2083 Normandy Drive, Door 113 to 134, New Cumberland, PA 17070-5002, with no variance permitted in quantity. The contract mandates electronic invoicing through Wide Area WorkFlow (WAWF), and all hazardous materials must be accompanied by Safety Data Sheets and labeled in accordance with 29 CFR 1910.1200, while radioactively contaminated items must comply with MIL-STD-129 thresholds. Cybersecurity compliance is mandated through NIST SP 800-171 assessment requirements and CMMC Level 2 self-assessment for covered defense information, with the contractor required to adhere to DFARS 252.204-7012 for cyber incident reporting. The contract includes clauses on equal opportunity, trafficking in persons, employment verification, sustainable procurement, and subcontractor management, with no cost data provided in the solicitation, leaving pricing as an open item for offeror submission. Offerors must hold an active Unique Entity ID and CAGE code, and any small business or socioeconomic status claims must be validated in SAM. Proposals are to be submitted exclusively via the DLA Internet Bid Board System by August 20, 2026, with no physical submissions permitted. The type of contract, though referenced in FAR 52.216-1 Alternate I, remains undefined pending award.
Plate Work Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332911
New
DIBBS
VALVE, RESTRICTOR CH
Solicitation # SPE7MC-26-T-248Y
This contract is for the procurement of four restrictor check valves, identified by NSN 4820006178346 and part number 1R30613-041R from SAF Industries LLC. The items are designated as critical application items and must adhere to Class 3 thread standards. Delivery is required within 104 days, with a required delivery date of August 12, 2026, shipped FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The agreement mandates strict compliance with DLA Master List technical and quality requirements, including CMMC Level 2 self-assessment and the protection of covered defense information. Packaging must follow ASTM D3951 and MIL-STD-129 standards, with specific palletization requirements outlined in RP001. Inspection and acceptance will take place at the destination, and the contract specifies a zero percent quantity variance.
Industrial Valve Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 321114
New
DIBBS
ANTISEIZE COMPOUND
Solicitation # SPE8ES-26-T-2725
This contract is a solicitation for the procurement of seven units of antiseize compound, identified by NSN 8030-01-653-2475. The agreement is managed by the Department of Defense under the DDSP New Cumberland Facility, with a delivery requirement of 172 days after the order is received. Compliance with DLA master lists for technical and quality requirements is mandatory, and specific attention is given to packaging, physical item marking, and the removal of government identification from non-accepted supplies. A significant portion of the contract focuses on hazardous material compliance. Suppliers must adhere to the Hazard Communication Standard and Federal Standard 313-E, which requires the submission of Safety Data Sheets and compliant labels to the contracting officer for approval prior to the award. Additionally, the supplier is responsible for training employees on these safety standards and ensuring that all MIL-STD-129 labels include the appropriate lot or batch numbers.
Wood Preservation

POSTED

about 6 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333415
New
DIBBS
COOLING COIL, AIR, DUCT
Solicitation # SPE8E8-26-T-5529
This contract is for the procurement of seven duct type air cooling coils, identified by NSN 4130012246431. The items are critical application components associated with Engineered Coil Company part numbers 1336D00, 1336D01, and 4W8-31-5611T. The delivery is set for 136 days after the order, with a required delivery date of April 12, 2027, and shipping is designated as FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129. It includes environmental restrictions prohibiting the intentional addition of mercury or ozone-depleting substances, except where functionally required by NAVSEA specifications. Technical and quality requirements are governed by the DLA Master List, and the contract specifies that inspection and acceptance will occur at the destination.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
DISK, VALVE
Solicitation # SPE7MC-26-T-248U
Industrial Valve Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details