Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Alternate Source Qualification and Technical Validation Services

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract involves providing specialized support services to manufacturers aiming to qualify alternate sources for the part number 22150 container. The scope of work includes the preparation of Source Approval Requests (SAR), development of technical documentation, and facilitating coordination with the relevant government engineering authority to secure approval from NAVSUP WSS N241. These services are essential to ensure compliance and validation of alternative suppliers within the Department of Defense supply chain. The subcontract is managed by the Department of Defense through the Pa DLA Aviation office in Philadelphia, with the work being performed in Richmond. Classified under NAICS code 541330, the contract focuses on technical and professional services related to engineering support. The overall objective is to streamline the alternate source qualification process, enabling manufacturers to meet stringent government requirements and maintain the integrity of vital supply components.

General Info

Provide technical support for alternate source qualification of 22150 container with NAVSUP approval.

Agency

Department Of Defense → Pa DLA Aviation At PhiladelphiaView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

Richmond, IN, USA

Set-Aside

NONE

Documents

This scope was carved out of SPRPA126CVA35.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SHIPPING AND STORAGE CONTAINER

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedMay 11

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Pa DLA Aviation At Philadelphia

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Pa DLA Aviation At Philadelphia

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Support for manufacturers seeking alternate source qualification for the P/N 22150 container, including SAR preparation, technical documentation, and coordination with the cognizant government engineering activity for NAVSUP WSS N241 approval.

Similar Contracts

Same NAICS industry code

Scattergood GS. Units 1&2 Green Hydrogen-Reaady Modernization

Solicitation # scattergood-gs-units-12-green-hydrogen-reaady-modernization

Kiewit Infrastructure West Co. is seeking sub-quotes for the Scattergood GS Units 1 and 2 Green Hydrogen-Ready Modernization project for the City of Los Angeles Department of Water and Power. The scope of work is extensive, encompassing professional and technical services such as civil, structural, mechanical, electrical, and instrumentation and controls engineering, as well as utility locating, geotechnical and geophysical investigations, BIM/3D modeling, and environmental assessments. Additional requirements include hazardous materials surveys, permitting support, and CPM scheduling. Interested firms must contact Kiewit to receive an Invitation to Bid via the Building Connected system, with a bid date of September 11, 2026, and a response deadline of September 30, 2026. Eligible bidders include Disadvantaged, Minority, Women, and Other Business Enterprises, provided they hold certifications from recognized agencies such as the SBA or MBDA. Responsive bidders must possess a valid California Contractor's license and provide acceptable insurance. Subcontractors and material contractors are required to provide bonding for 100 percent of their contract value, though Kiewit will reimburse the associated bond premiums. Furthermore, Kiewit, as a signatory to various collective bargaining agreements, requires bidders to demonstrate an ability to maintain labor harmony on the project. For further information or to review plans and specifications, interested parties should contact Lead Estimator Joe Bockelman.

Kiewit Infrastructure West Co.

POSTED

about 10 hours ago

DEADLINE

Seeking Qualified Subconsultants for City of Bend’s Southwest Sewer Improvement Phase 3, Project No. 1SSW3

Solicitation # seeking-qualified-subconsultants-city-bends-southwest-sewer-improvement-phase-3-project-no-1ssw3

Water Systems Consulting, Inc. is seeking qualified subconsultants to assist with the Southwest Sewer Improvement Phase 3 project for the City of Bend, Oregon. The scope of work involves professional design services to address sewer system deficiencies, including the extension of gravity sewer mainlines, the decommissioning of existing pump stations, and the installation of service laterals for properties currently using onsite septic systems. The project may also encompass necessary transportation improvements. WSC is specifically looking for expertise in roadway and drainage engineering, surveying and mapping, right of way services, and public outreach. This project is funded by the Clean Water State Revolving Fund through the Oregon Department of Environmental Quality. The solicitation is open to various small business certifications, including DBE, WOSB, and SDVOSB, with a response deadline of September 29, 2026.

Water Systems Consulting, Inc.

POSTED

about 10 hours ago

DEADLINE

SEEKING QUALIFIED SUBCONSULTANTS IN RIVERSIDE COUNTY/SOCAL TO SUPPORT WELL REPLACEMENT PROJECT WITH WATER DISTRICT

Solicitation # seeking-qualified-subconsultants-riverside-countysocal-support-well-replacement-project-water

GHD Inc. is soliciting qualified subconsultants to support the Corydon Well Replacement Design Project for the Elsinore Valley Municipal Water District in California. The project seeks expertise in engineering, environmental services, surveying, geotechnical analysis, permitting, public outreach, and utility location. This opportunity is specifically open to Disadvantaged, Small, Women-Owned, and Minority-Owned Business Enterprises, as well as other certified small business entities. Interested firms must contact Charlie Brown via email to submit a qualifications package and request solicitation documents. The deadline for initial contact is August 7, 2026, with a final deadline to receive solicitation documents by 5pm PST on Friday, August 14, 2026. Relevant NAICS codes for this engagement include 541330, 237110, and 541490, among others.

POSTED

about 10 hours ago

DEADLINE

Subcontracting Opportunity: City of Bend’s Southwest Sewer Improvement Phase 3, Project No. 1SSW3

Solicitation # 27-3214

Parametrix is seeking qualified subconsultants to provide civil engineering design and right-of-way services for the City of Bend’s Southwest Sewer Improvement Phase 3, Project No. 1SSW3. The project aims to address sewer system deficiencies in southwest Bend by extending a gravity trunk sewer line to unsewered areas, decommissioning existing pump stations in the Romaine Village area, and installing service laterals to transition properties from private septic systems to public sewer. The scope may also include roadway reconstruction, ADA curb ramp and curb design, and minor transportation improvements such as turn lanes or mini roundabouts. The project is funded by the Clean Water State Revolving Fund administered through the Oregon Department of Environmental Quality, with a total design and construction budget of 3,875,000 dollars. The procurement process is managed by the City of Bend, with a proposal deadline of September 29, 2026. Selection is based on technical and administrative capabilities, with the potential for interviews to influence final scoring. Key deliverables include a preliminary engineering report, a public outreach plan, and construction contract documents at 30, 60, 90, and 100 percent completion, culminating in record drawings. The City intends to advertise for construction services in Fall or Winter 2027. Parametrix is actively soliciting firms with recognized federal, tribal, state, local, or independent DBE certifications as part of a good faith effort to include small, minority-owned, women-owned, and veteran-owned businesses.

POSTED

about 10 hours ago

DEADLINE

Design / Engineering for Microgrid System and DC fast charger

Solicitation # PE-64458-NONST-2027-000000037

The City of Decatur is soliciting proposals from qualified vendors to provide turnkey services for the design, bid assistance, and construction administration of a microgrid system. This project, located at the Decatur Police Department at 420 West Trinity Place in Decatur, Georgia, involves the installation of a solar photovoltaic generation system, a battery energy storage system, and a DC fast charger. The solicitation, identified as PE-64458-NONST-2027-000000037, was posted on September 11, 2026, with a response deadline of October 13, 2026. The project start date will be established following the award and coordination with Georgia Power. Interested parties may contact David Junger for further information regarding this SLED organization opportunity.

City of Decatur

POSTED

about 11 hours ago

DEADLINE

in about 1 month

Infrastructure - Request for Proposal - RFP FOR SITE AND GEOTECHNICAL INVESTIGATION CONSULTANT SERVICES FOR VARIOUS LOCATIONS – ELEVEN (11) SOUTH ALBERTA SCHOOL SITES

Solicitation # AB-2026-06239

The Infrastructure agency is seeking proposals from qualified consultants to provide site and geotechnical investigation services for eleven school sites located in South Alberta. This solicitation, identified as AB-2026-06239, focuses on essential land assessments and technical investigations to support the development of educational facilities in the Calgary region. Interested parties must submit their responses by the deadline of October 7, 2026, at 10:00 PM. The procurement process is being managed by Project Procurement Specialist Nkechi Nzewi, and further details regarding the submission process can be found through the official Alberta purchasing portal.

POSTED

about 11 hours ago

DEADLINE

Civil/Roadway Engineering Design (100% Plans)

Department of Environmental Protection

POSTED

about 12 hours ago

DEADLINE

Professional Services for Pensacola Bay Unpaved Roads Project

Solicitation # 2027002

The Department of Environmental Protection of Florida is seeking qualified vendors to provide professional services for the Pensacola Bay Unpaved Roads Project under solicitation number RFSOQ 2027002, which was posted on July 7, 2026, with a response deadline of August 11, 2026, at 7:00 PM Eastern Time. The work falls under NAICS code 70171503 and is classified as a state, local, or educational government procurement, with performance location specified within the state of Florida. Interested parties must submit their responses by the stated deadline, and failure to file a formal protest within the timeframe outlined in section 120.57(3) of the Florida Statutes or to post the required bond or security will result in the waiver of rights to pursue any administrative proceedings under Chapter 120. All inquiries and submissions should be directed to Sabina Flanagan at sabina.flanagan@FloridaDEP.gov or by phone at 850-245-2187. Additional details regarding technical and administrative requirements are contained within the full solicitation document accessible via the provided online portal.

Department of Environmental Protection

POSTED

about 12 hours ago

DEADLINE

Engineering Services for the Mountain View Sanitary Pump Station Facility Rehabilitation

Solicitation # RFP 2417

The Township of Wayne, through its Division of Water and Sewer, is soliciting proposals from qualified professional engineering firms for the rehabilitation of the Mountain View Sewer Pump Station. The selected firm will be responsible for providing comprehensive design, bidding, and construction administration services to ensure the successful facility upgrade. This solicitation, identified as RFP 2417, was posted on September 11, 2026, with a response deadline of October 6, 2026, at 3:00 PM. Interested parties should direct inquiries to Nicole Lee, the Specifications Writer, via email or phone. The project is managed by the Purchasing Division of the Township of Wayne in New Jersey.

Purchasing Division

POSTED

about 14 hours ago

DEADLINE

Specialized Technical Services (IT & Planning)

Navsup Flt Logistics Ctr Yokosuka

POSTED

about 15 hours ago

DEADLINE

CryCam UV System Installation and Personnel Training

Brookhaven National Labor -Doe Contractor

POSTED

about 15 hours ago

DEADLINE

Architectural & Engineering Design Services

Department Of Commerce Sspo

POSTED

about 15 hours ago

DEADLINE

More opportunities from Department Of Defense → Pa DLA Aviation At Philadelphia

Same awarding agency

81--CONTAINER,SHIPPING

Solicitation # SPRPA126RVC30

This solicitation is for the procurement of aluminum shipping containers, specifically part number 20140, to be manufactured according to Champion Company drawings. The contract is being extended to October 13, 2026, to promote competition. Key technical requirements include the use of specific weld fillers for 6061 and 5000 series aluminum, adherence to AWS welding standards, and the application of an electrodeposited alkaline Zinc-Nickel Alloy finish. Each container must feature a Unique Identification marking on a nameplate and include a specific amount of desiccant based on interior volume. A critical component of this contract is the First Article Testing (FAT) process, which includes dimensional inspections, a form and fit check with a T408-GE-400 engine, and a rigorous 18-inch free-fall drop test followed by pneumatic leak testing. New manufacturers may be subject to pre-award surveys and post-award conferences. While the government estimates first article testing costs at 12,000 dollars, all costs associated with the submission and shipment of FAT samples are the responsibility of the contractor. The contract also specifies strict chemical deoxidizing and mechanical cleaning procedures to be performed immediately prior to welding.

Other Metal Container Manufacturing

POSTED

about 15 hours ago

DEADLINE

in about 1 month

81--SHIPPING AND STORAG

Solicitation # SPRPA126RVC10

This solicitation from the DLA Aviation office in Philadelphia is for the manufacture and delivery of aluminum containers according to drawing 875E001. The contract emphasizes strict quality control, requiring adherence to AWS welding standards and specific chemical deoxidizing and cleaning processes to prevent corrosion. Key technical requirements include the use of specific desiccant amounts, the application of Zinc-Nickel Alloy finishing instead of cadmium plating, and the installation of approved shock mounts. Each unit must feature a Unique Identification marking and follow a specific serial number convention. The agreement mandates a rigorous First Article Testing process, including dimensional inspections, a form and fit check, and a series of leak and 18-inch free-fall drop tests. All production units are also subject to a 100% production leak test following a drop test to ensure structural integrity. Contractors must provide their own tooling and manufacturing aids, and new manufacturers may be subject to pre-award surveys and post-award conferences due to the critical nature of the items.

Other Metal Container Manufacturing

POSTED

about 15 hours ago

DEADLINE

in about 1 month

16--PUMP,WINDOW WASHER

Solicitation # SPRPA126QUB47

This solicitation, issued by the Department of Defense via DLA Aviation in Philadelphia, is for the procurement of window washer pumps under solicitation number SPRPA126QUB47. The closing date for responses is September 30, 2026. This requirement is issued under EAF authority and is specifically for non-CLSSA Foreign Military Sales, meaning the assets will be owned by customer countries rather than the U.S. Government. Consequently, standard Item Unique Identification and Valuation requirements are waived. Eligible suppliers must be government-approved sources providing newly manufactured spares; refurbished or repaired materials are strictly prohibited. All parts must be FAA-certified and accompanied by an FAA Form 8130-3 Airworthy Approval Tag. Quality requirements include adherence to AS/EN/JISQ 9100 or an equivalent standard. Authorized distributors must provide a formal distributor letter on the source's letterhead at the time of proposal submission to be considered technically acceptable.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

15--DOOR,ACCESS,AIRCRAF

Solicitation # SPRPA126QUC06

This solicitation, issued by the DLA Aviation office in Philadelphia, is for the procurement of two aircraft access doors under contract NSN 7R-1560-017005796-P8. The acquisition is conducted as a commercial item procurement under FAR Part 12, requiring that all components be newly manufactured spares; refurbished or repaired materials are strictly prohibited. Delivery is set as FOB Origin, and the items must meet all government form, fit, and function requirements. Eligible offerors must be government-approved sources of supply or provide an authorized distributor letter. A critical requirement for award is the provision of an FAA Form 8130-3 Authorized Release Certificate to certify airworthiness and traceability from the original manufacturer. Vendors must provide documentation supporting the commerciality of the items, a standard commercial warranty, and full supply chain traceability. IUID is not required for these items as they are captured under the parent end item in the DoD registry.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

in about 2 months

16--FIRE CONTROL PANEL

Solicitation # SPRPA126QUC04

This solicitation, issued by the Department of Defense via the DLA Aviation office in Philadelphia, is for the procurement of two aircraft fire control panels under NSN 7R-1680-016679280-P8. The items are classified as commercial products and must be newly manufactured spares; refurbished, remanufactured, or repaired materials are strictly prohibited. Delivery is set as FOB Origin, and the acquisition is governed by FAR Part 12 and applicable DFARS regulations. Eligible offerors must be government-approved sources of supply or provide an authorized distributor letter. A critical requirement for award is the provision of an FAA Form 8130-3 Authorized Release Certificate to certify airworthiness and traceability from the original manufacturer. Vendors must provide documentation supporting the commerciality of the items, including technical specifications and sales history, and ensure the components meet all form, fit, and function requirements. A standard commercial warranty covering workmanship and replacement parts is required.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

66--TRANSDUCER,MOTIONAL

Solicitation # SPRPA126QUB95

This solicitation, issued by the DLA Aviation office in Philadelphia, is for the procurement of two new motional transducers under contract NSN 7R-6695-015731832-P8. The items are classified as commercial products and must be newly manufactured; refurbished or repaired materials are strictly prohibited. Delivery is set as FOB Origin, and the acquisition follows FAR Part 12 and DFARS 212 regulations. Eligible offerors must be government-approved sources of supply or provide an authorized distributor letter on the source's letterhead. A critical requirement for award is the provision of an FAA Form 8130-3 Authorized Release Certificate to certify airworthiness and traceability from the original manufacturer. Vendors must also provide documentation supporting the item's commerciality, a standard commercial warranty, and technical specifications ensuring the components meet the required form, fit, and function.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

16--TAXI,NOSE GEAR,AIR

Solicitation # SPRPA126QUC02

This solicitation, issued by the DLA Aviation office in Philadelphia, is for the procurement of two new nose gear taxi aircraft components under NSN 7R-1680-015885785-P8. The acquisition is conducted as a commercial item procurement in accordance with FAR Part 12 and DFARS 212, requiring that all provided components be newly manufactured spares. Refurbished, remanufactured, or repaired materials are strictly prohibited and will be deemed ineligible for award. Suppliers must be government-approved sources of supply and provide an FAA Form 8130-3 Authorized Release Certificate to certify airworthiness and conformity to design data. Offerors are required to submit documentation supporting the commerciality of the items, such as sales history or price lists, and must provide full traceability from the original manufacturer. Delivery is specified as FOB Origin, and the contract requires a standard commercial warranty covering workmanship and replacement parts.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

48--VALVE,CROSS

Solicitation # SPRPA126QUC03

This solicitation, issued by the DLA Aviation office in Philadelphia, is for the procurement of nine aircraft cross valves under NSN 7R-4810-016016223-P8. The items are classified as commercial products and must be newly manufactured spares; refurbished, remanufactured, or repaired materials are strictly prohibited. Delivery is set as FOB Origin, and all components must meet the government's form, fit, and function requirements. A critical requirement for this contract is the provision of an FAA Form 8130-3 Authorized Release Certificate to ensure airworthiness and traceability from the original manufacturer. Offerors must provide documentation supporting the commerciality of the items and must be government-approved sources of supply or provide an authorized distributor letter. The acquisition is conducted under FAR Part 12 and EAF Authority, requiring a standard commercial warranty and adherence to specific packaging and labeling standards.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

81--SHIPPING AND STORAG

Solicitation # SPRPA126RVC35

This solicitation, issued by DLA Aviation at Philadelphia, seeks the procurement of an aluminum outer shell container and an Inner Frame Adapter Assembly for the T-56 QECA engine. The contract is extended to October 13, 2026, to promote competition and is designated as a total small business set-aside. Manufacturing must adhere to specific Container Research Corporation drawings and AWS welding standards, with a strict requirement for engineering source approval for new manufacturers. Key technical specifications include the use of electrodeposited alkaline Zinc-Nickel Alloy finishing and the installation of specific desiccant and shock mounts. Quality assurance is a critical component of this contract, requiring 100% production leak testing and a rigorous First Article Testing (FAT) process. The FAT includes dimensional inspections, an 18-inch free-fall drop test, and form and fit verification. Contractors must provide a first article sample within 160 calendar days of the contract date to designated facilities in New Jersey. All items must feature Unique Identification (UID) markings and comply with Buy American and Free Trade Agreement certifications.

Other Metal Container Manufacturing

POSTED

DEADLINE

in about 1 month

16--CABIN TEMPERATURE I

Solicitation # SPRPA126QUB92

This solicitation, identified by NSN 7R-1680-016010190-P8 and reference number 162BL902, is for the procurement of one aircraft component determined to be a commercial item. The acquisition is governed by FAR Part 12 and DFARS 212, requiring that the component be currently in production or previously offered in the commercial marketplace. All submitted items must be newly manufactured spares; refurbished, remanufactured, or repaired materials are strictly prohibited and will be deemed ineligible for award. To be considered technically acceptable, offerors must be government-approved sources of supply or provide an authorized distributor letter. A critical requirement is the provision of an FAA Form 8130-3 Authorized Release Certificate to certify airworthiness and traceability from the original manufacturer. Vendors must provide documentation supporting the item's commerciality, such as price lists or sales history, and ensure the component meets all form, fit, and function requirements. Delivery is FOB Origin, and the contract requires a standard commercial warranty covering workmanship and replacement parts.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

NRP,FWD FAIRING ASS

Solicitation # SPRPA126QUB93

This solicitation, issued by the Department of Defense via the DLA Aviation office in Philadelphia, is for the procurement of NRP FWD Fairing Assemblies. The contract requires that all parts be newly manufactured, as refurbished, remanufactured, or repaired materials are strictly prohibited. Suppliers must be government-approved sources and provide FAA-certified parts accompanied by an FAA Form 8130-3 Airworthy Approval Tag. Distributors must submit an authorized distributor letter on the source's letterhead to be considered technically acceptable. The agreement mandates compliance with AS/EN/JISQ 9100 quality standards and includes a 12-month warranty for supplies of a noncomplex nature. Payments are to be processed through the Wide Area Workflow system using combined invoice and receiving reports. While IUID is generally required, it is waived for these commercial items per the PMA-290 implementation plan. The solicitation is issued under EAF authority, and responses are due by October 13, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

81--NRP,SHIPPING AND ST

Solicitation # SPRPA126RVC02

This solicitation is for the manufacture of plastic containers produced via rotomolding, specifically following drawing 829E001. The contract includes strict quality assurance requirements, including a First Article Test (FAT) involving dimensional inspections, 18-inch free fall drop tests, and pneumatic leak testing. All production units must undergo 100% leak testing and be affixed with a Unique Identification (UID) marking on a nameplate. The contractor is responsible for all tooling, fixtures, and the cost of FAT shipment and repair. Key technical specifications require the use of a specific amount of desiccant per cubic foot and the substitution of alkaline Zinc-Nickel Alloy plating for cadmium. The contract is a total small business set-aside and includes various federal clauses regarding the Buy American Act and the Trade Agreements Act. The current amendment extends the solicitation period to September 23, 2026, to promote competition. New manufacturers must obtain engineering source approval from the design activity and may be subject to pre-award surveys and post-award conferences.

Other Metal Container Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS