Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Aluminum Alloy Metal Sheet Supply

Active

Federal

Response Deadline07/23/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the supply of five sheets of aluminum alloy 2024-T81 compliant with military and aerospace specifications, adhering to ASTM and SAE standards to ensure material integrity and performance in critical applications. The material must meet exacting mechanical and chemical requirements typical of high-stress aerospace environments, with strict quality control protocols expected during fabrication and delivery. The sheets are intended for use in defense-related maintenance, repair, and overhaul operations under the Department of Defense. This is a subcontract posting issued under NAICS code 331315, with a response deadline of July 23, 2026, and a posted date of July 16, 2026. The contract falls under the purview of the Construction & Equipment MRO SVC I office within the Department of Defense, and the place of performance and point of contact information are not specified. Interested parties must submit proposals through the official DIBBS portal using the provided link before the deadline to be considered for award.

General Info

Supply five aluminum alloy 2024-T81 sheets for DoD MRO, meeting ASTM/SAE specs, deadline July 23, 2026.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC IView Agency

NAICS

331315 - Aluminum Sheet, Plate, and Foil ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 16

subcontract

Response DeadlineJul 23

Submission deadline

Response Deadline

07/23/2026, 05:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of 5 sheets of aluminum alloy 2024-T81 meeting military and aerospace specifications including ASTM and SAE standards.

Similar Contracts

Same NAICS industry code

SHEET, METALThis procurement contract specifies the supply of aluminum alloy sheet metal, 0.060 inches thick, 48 inches wide, 144 inches long, made from 2024 alloy in T81 temper, with a nominal weight of 41.886 pounds per sheet. All material must meet strict technical standards including SAE AMS4268B, ASTM B666/B666M-20, ASTM B660-23, and SAE AMS-QQ-A-250/4B, and must be supplied in even-foot lengths only. Every unit must be permanently marked with the DLA contract delivery order number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and exact dimensions using stamped or stenciled characters that are legible, waterproof, and non-contaminating. Adhesive labels are permitted for smaller bars, tubes, and shapes under 0.250 inches nominal OD, and tags are acceptable for wire. A Certificate of Quality Compliance, signed by the manufacturer, must accompany every shipment and be forwarded to the DLA Troop Support Contracting Officer. The contract mandates strict adherence to the Qualified Suppliers List for Distributors (QSLD); only suppliers listed on this official DLA roster are eligible for award, and any deviation must be explicitly declared. Products not sourced from approved QSLD distributors are considered unauthorized substitutions and may lead to criminal penalties. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, incorporating robust edge and corner protection, full top and bottom coverage with fiberboard or better, and preservation methods per ASTM B660. All shipments are destined for the Parts-Attach General Depot in Tainan, Taiwan, under FOB origin terms with a 60-day delivery window. Pricing is firm fixed price with zero variance allowed, inspection and acceptance occur at destination, and the government waives source inspection requirements for QSL-compliant suppliers. The technical data package references multiple standards and CDRL requirements, and all documentation must align with the DLA Master List of Technical and Quality Requirements in effect on the solicitation issue date.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 17 hours ago

DEADLINE

Transition Training Panels

FA3020 82 Cons Lgc

POSTED

about 22 hours ago

DEADLINE

Precision Aluminum Alloy Plate ManufacturingThe contract requires the manufacture of large-format precision aluminum alloy plates measuring 3 inches thick by 36 inches by 96 inches, adhering strictly to military specifications including SAE AMS4201H, ASTM B660-23, and ASTM B666/B666M-20. Full compliance is mandated across all stages of production—material sourcing, machining precision, preservation techniques, packaging protocols, and documentation certification—to ensure the plates meet the rigorous demands of defense applications. The work is to be performed at Tinker Air Force Base, Oklahoma, with all deliverables subject to defense quality assurance standards. This is a small business set-aside subcontract under the SBA program, classified under NAICS code 331315 for aluminum manufacturing, and is issued by the Department of Defense through Depot Oklahoma. The solicitation was posted on July 16, 2026, with a response deadline of July 24, 2026, limiting participation to businesses certified as small under federal guidelines. The contract emphasizes stringent quality control, traceability, and adherence to military-grade tolerances, ensuring the final products are suitable for high-performance aerospace and defense systems. All submissions must fully address technical, compliance, and certification requirements outlined in the referenced standards.

POSTED

DEADLINE

Supply of Aluminum Alclad Metal SheetsThe contract requires the manufacture and supply of 30,000 aluminum Alclad sheets adhering to stringent industry standards including SAE AMS4461C, ASTM B666/B666M-20, and QQ-A-250/5C, ensuring material quality, composition, and surface characteristics meet military-grade specifications. Each sheet must comply with exact thickness, dimensional tolerances, and weight parameters to guarantee compatibility and performance in critical applications. The materials are intended for use within defense and aerospace systems where structural integrity and corrosion resistance are paramount. The solicitation is classified as a subcontract under NAICS code 331315, indicating involvement in aluminum rolling and extruding operations. The opportunity was posted on July 16, 2026, with a firm response deadline of July 24, 2026, and is managed by the Department of Defense through its Construction & Equipment MROSvc I procurement arm. While specific performance location and point of contact details are not provided, the contract is accessible through the DIBBS platform, and bidders must ensure full compliance with all technical and regulatory requirements to be considered for award.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Aluminum Alloy Sheet Metal SupplyThe contract requires the supply of aluminum alloy sheet metal meeting exact specifications including a thickness of 0.025 inches and dimensions of 36 by 96 inches, identified by National Stock Number 9535-00-250-6498. All materials must be provided in whole-foot lengths and must include full traceability and compliance documentation to ensure adherence to federal standards. The work falls under NAICS code 331315 and is classified as a subcontract under the Department of Defense’s Construction & Equipment MRO SVC I program. The solicitation was posted on July 16, 2026, with a response deadline of July 23, 2026, and is accessible via the DIBBS platform for qualified vendors to submit proposals.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Supply of Aluminum Alloy Metal Sheets (0.100" x 48" x 144")The contract requires the supply of 15 aluminum alloy sheets with precise dimensions of 0.100 inch thickness by 48 inches width by 144 inches length, fully compliant with stringent military specifications covering marking, packaging, and documentation. Vendors must adhere to strict protocols for Controlled Unclassified Information safeguards and proper handling of hazardous materials throughout all phases of fulfillment. The work includes complete packaging, labeling, and timely delivery to Tinker Air Force Base, with the final destination zip code specified as 73145-8000. The contract is classified as a subcontract under NAICS code 331315 and is issued by the Department of Defense under the agency name CONSTRUCTION & EQUIPMENT MRO SVC I. Responses are due by July 23, 2026, following a posting date of July 16, 2026, ensuring a seven-day window for submission. All deliverables must meet federal and defense regulatory standards, with full traceability and compliance documentation required.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

SHEET, METALThe contract specifies the procurement of aluminum alloy metal sheets with precise dimensional and material requirements: 0.160 inches thick, 48 inches wide, 96 inches long, weighing 73.60 pounds per sheet, and must be supplied in whole-foot lengths only. Compliance with SAE AMS4268B, ASTM B666/B666M-20, ASTM B660-23, and ASTM B660 standards is mandatory, and the material must conform to alloy 2024 in temper T81. Every shipment requires a Certificate of Quality Compliance, which must accompany the product and be forwarded to the DLA Troop Support Contracting Officer. Continuous markings on each sheet are mandatory, including the DLA contract delivery order number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and exact dimensions. Markings must be legible, waterproof, and applied via stamping or stenciling without contaminating the material, and adhesive labels are permitted for small bars or tubes under 0.250 inches in nominal OD. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award, and deviations or use of non-approved suppliers incur risk of criminal penalties. The product is classified as a critical application item, and no test coupons are permitted. Packaging must comply with MIL-STD-2073-1E and Level A requirements of ASTM B660, including full corner and edge protection, robust fiberboard coverage, and marking per MIL-STD-129 and the purchase order text. Delivery is to Tinker AFB, Oklahoma, with a firm fixed price, zero variance in quantity, and a delivery window of 87 days after award date. Inspection and acceptance occur at destination, and government source inspection requirements are waived under the QSL program.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

SHEET, METALThe contract specifies the procurement of aluminum Alclad metal sheets with a thickness of 0.0020 inches on both sides and a base thickness of 0.040 inches, measuring 36 inches in width and 144 inches in length, totaling 20.73 pounds per sheet. All material must strictly adhere to the specified dimensions and may not include test coupons. The sheets must be supplied in whole-foot lengths only and conform to industry standards including SAE AMS4461C, ASTM B666/B666M-20, ASTM B660-23, and ASTM QQ-A-250/5C for Alclad 2024 temper. A Certified Quality Compliance document, including mill-material certification, is mandatory for every shipment and must be delivered to both the receiving depot and the DLA Troop Support Contracting Officer. Each unit must bear continuous identification markings including the DLA contract number, NSN, specification revision, alloy grade, manufacturer details, heat and lot numbers, and dimensions. Markings must be applied via stamping or stenciling using waterproof, non-contaminating fluids and must remain legible after normal handling. Adhesive labels are permitted for small-diameter bars, tubes, and shapes under 0.250 inches nominal OD, with tags acceptable for wire. Packaging must meet MIL-STD-2073-1E Level A requirements using preservation methods in accordance with ASTM B660 and marking per ASTM B666. Shipping containers require full edge and corner protection, with robust fiberboard or equivalent top and bottom coverage. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to bid under this solicitation, and any deviation from this requirement constitutes an exception that must be clearly stated. Products supplied by non-QSLD distributors, even if manufactured to specification, are considered unauthorized substitutions and may lead to criminal penalties. Quality conformance inspections, source inspection, and related requirements are waived for QSLD-compliant suppliers. The shipment must be delivered within 90 days of award to the specified DLA Distribution Depot in Tinker AFB, Oklahoma, with FOB origin and firm fixed pricing with zero variance allowed. The items must be marked with both units of measure on the packaging if applicable. The contract further references specific DLA packaging, labeling, and compliance directives that govern all aspects of material preparation, documentation, and delivery.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

SHEET, METALThis contract governs the procurement of aluminum alloy sheet metal specified as 0.025 inches thick, 36 inches wide, and 96 inches long, weighing 8.47 pounds per sheet, under NSN 9535-00-250-6498. All deliveries must strictly adhere to exact dimensional requirements with no tolerance for test coupons and must be supplied in whole-foot lengths only. Each unit must carry continuous identification markings including the DLA contract delivery order number, NSN, specification revision, alloy and temper designation, manufacturer’s name, heat and lot number, and dimensions, applied by stamping or stenciling in a legible, waterproof, and durable manner that does not contaminate the material. Adhesive labels are required for small-diameter bars, tubes, and shapes under 0.250 inches, while tags are acceptable for wire. A Certificate of Quality Compliance, or mill certification, must accompany every shipment and be forwarded to the DLA Troop Support Contracting Officer. Packaging must follow MIL-STD-2073-1E and RP001 DLA Packaging Requirements, with preservation and marking methods conforming to ASTM B660 and ASTM B666/B666M-20 standards, and all markings must include both units of measure when applicable. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to respond to this solicitation, and any deviation from this requirement constitutes a non-compliant bid subject to rejection. Non-QSLD suppliers must explicitly declare their deviation, and products supplied by unauthorized distributors—even if otherwise compliant—are considered unauthorized substitutions with potential criminal penalties. The material must conform to SAE AMS4027P, ASTM B666/B666M-20, and ASTM B660-23 specifications, with the TDP referencing revision levels as outlined. Delivery is required within 80 days of award, with firm fixed pricing and zero variance allowed in quantity. Inspection and acceptance occur at destination, with FOB origin. The shipping address is the DLA Distribution DDSP New Cumberland facility, and all shipment markings must comply with MIL-STD-129. The solicitation waives source inspection requirements for QSL-compliant suppliers, eliminating the need for COQC, PVT, QAP-EQ003, and RQ006 compliance, unless otherwise specified for Foreign Military Sales

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

PLATE, METALThis contract specifies the procurement of an aluminum alloy metal plate measuring 3.000 inches thick, 36.00 inches wide, and 96.00 inches long, with a nominal weight of 1057.536 pounds per piece. The material must fully comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, including adherence to SAE AMS4201H, MIL-STD-129R, ASTM B666/B666M-20, and ASTM B660-23, as outlined in the Technical Data Package. All units must be supplied in whole-foot lengths within specified dimensional tolerances, with no test coupons permitted. Continuous marking on every unit is mandatory, including the DLA contract delivery order number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and exact dimensions, applied via stamping or stenciling using non-contaminating, waterproof, and durable methods. Adhesive labels are required for smaller bars, tubes, and shapes under 0.250 inches nominal OD. The solicitation is subject to the Qualified Suppliers List for Distributors (QSLD) requirement, meaning only suppliers listed on the DLA Troop Support QSLD are eligible to bid; non-compliant offers must explicitly state deviation. Substitution by unapproved distributors is prohibited and may result in criminal penalties. Quality compliance is enforced through a Certificate of Quality Compliance (Mill-Material Certification), which must accompany each shipment and be forwarded to the contracting officer. Packaging must follow MIL-STD-2073-1E and Level A of ASTM B660, with special preservation and marking codes ZZ and Z applied as dictated. The item is designated a Critical Application Item, with firm fixed pricing, zero quantity variance, destination inspection and acceptance, and FOB origin terms. Delivery is required within 105 days of award to the designated DLA Distribution Depot in Tinker AFB, Oklahoma. The contract is a total small business set-aside under FAR 19.5, with no source inspection required for QSLD-compliant suppliers.

POSTED

DEADLINE

SHEET, METALThe contract specifies the procurement of aluminum alloy metal sheets measuring 0.100 inches thick by 48 inches wide and 144 inches long, with a reference weight of 69.79 pounds per sheet, and requires strict adherence to exact dimensions without tolerance for test coupons. Each sheet must be supplied in whole-foot increments and bear continuous identification markings including the DLA contract delivery order number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and dimensions. Markings must be applied via stamping or stenciling using waterproof, non-contaminating fluids that remain legible under normal handling; adhesive labels are permitted for smaller bars, tubes, and shapes under 0.250 inches in nominal OD, with tags acceptable for wire. A Certificate of Quality Compliance, or mill-material certification, is mandatory for every shipment and must be provided to both the receiving depot and the DLA Troop Support Contracting Officer. The material must conform to multiple technical standards including SAE AMS4044, ASTM B666/B666M-20, ASTM B660-23, and ANSI/MS-QQ-A-250/24C, with certification referencing CDRL-METALSCERT-26124 and the Technical Data Package Revision A Gen 2. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award, and deviations from this requirement must be explicitly declared; failure to comply constitutes an unauthorized substitution with potential criminal penalties. Packaging must meet MIL-STD-2073-1E and Level A requirements of ASTM B660, including robust corner protection, full edge coverage, and fiberboard top and bottom protection. The unit of issue is the sheet (SH), with a firm fixed price and zero variance in quantity. Delivery is due 85 days after award, with inspection and acceptance occurring at destination under FOB origin terms. The shipment address is the DLA Distribution Depot in Tinker AFB, Oklahoma, and all marking and packaging must comply with MIL-STD-129 and special requirements designated as ZZ.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

PLATE, METALThe contract specifies the procurement of aluminum alloy plates with precise mechanical and metallurgical requirements: 0.500 inches thick, 60.00 inches wide, and 240.00 inches long, weighing approximately 691.200 pounds per unit, made from high-magnesium aluminum alloy 5086 in temper H116, conforming to ASTM B928/B928M-15 and other referenced technical standards. The material must be supplied in whole-foot lengths only, with no test coupons permitted, and each unit must be continuously marked with the DLA contract delivery order number, NSN, specification revision, alloy and temper designation, manufacturer’s name, heat and lot number, and dimensions using stamping or stenciling that remains legible, waterproof, and durable under normal handling; adhesive labels are required for narrow bars, tubes, or shapes under 0.250 inches nominal outer diameter. Packaging must strictly adhere to MIL-STD-2073-1E and Level A requirements of ASTM B660-23 with special code ZZ, including preservation methods that ensure no contamination or performance degradation, and all shipments must be palletized per DLA Packaging Requirements for Procurement. Marking on the exterior of packages must comply with MIL-STD-129R(3), including 2D Data Matrix barcodes for automated tracking, and both unit quantities must be labeled when dual units are specified on the contract. A Certificate of Quality Compliance, or mill material certification, must accompany every shipment and be forwarded to the DLA Troop Support Contracting Officer. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) as of June 1994 are eligible to respond; non-compliant bids must declare deviation and any non-QSLD product is considered an unauthorized substitution with potential criminal penalties. For QSLD-compliant suppliers, quality conformance inspections including COQC, PVT, and RQ006 are waived unless the order is part of a Foreign Military Sale. The product must be manufactured to exact dimensions and fully conform to the referenced Technical Data Package, including Disc Drawing No. 01735 and QAP 13873. Delivery is required FOB origin within 110 days after order date, with a target ship date of August 25, 2026, to the DDSP New Cumberland Facility in Pennsylvania

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

Same awarding agency

Unable to Retrieve Contract DataThe contract opportunity is a subcontract under the Department of Defense’s Construction & Equipment MRO SVC I program, with a solicitation number SPE8E926Q0586 and a posting date of July 17, 2026. Responses are due by July 24, 2026, but critical details such as the contract scope, CLINs, NAICS code, place of performance, and point of contact are unavailable, preventing full decomposition or assessment of requirements. The system encountered repeated gateway timeout errors when attempting to retrieve prime contract data, leaving insufficient metadata to identify specific deliverables, funding, or performance locations. The solicitation is accessible via a DIBBS link, though no set-aside information, agency office address, or contact details are provided, limiting the ability to determine eligibility or pursue responsive actions.

POSTED

about 17 hours ago

DEADLINE

Supply of Solid Rubber Sheet (NSN: 9320-00-618-2405)The contract requires the supply of one unit of a commercial off-the-shelf solid rubber sheet that meets federal National Stock Number specifications NSN 9320-00-618-2405, with all necessary packaging, marking, and handling protocols for hazardous materials if applicable. The item falls under NAICS code 326220 and is procured through a subcontract mechanism under the Department of Defense’s Construction & Equipment MRO SVC I agency. The solicitation was posted on July 17, 2026, with a response deadline of July 24, 2026, and the place of performance and point of contact details are not specified. The procurement is conducted via the DIBBS system, and all deliverables must conform strictly to the NSN standard without deviation.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 17 hours ago

DEADLINE

Technical Data and Compliance Documentation SupportThe contract requires the preparation and submission of comprehensive technical documentation to support compliance with specified requirements, including detailed compliance reports, material safety data sheets (MSDS), and proper product labeling. All deliverables must align with the outlined standards to ensure regulatory adherence and operational readiness. The work falls under the NAICS code 541690, indicating it is a technical and scientific consulting service, and is structured as a subcontract under the Department of Defense’s Construction & Equipment MRO SVC I program. The solicitation was posted on July 17, 2026, with a response deadline of July 24, 2026, giving potential bidders a one-week window to submit proposals. No set-aside provisions are designated, meaning the opportunity is open to all eligible contractors. The place of performance and point of contact details are unspecified, and all submissions must be made through the official DIBBS platform using the provided RFQ link. Timely and accurate documentation is critical, as failure to meet compliance standards could result in rejection or contract non-performance.

Other Scientific and Technical Consulting Services

POSTED

about 17 hours ago

DEADLINE

Packaging and Marking Services for Military ShipmentThe contract requires the provision of packaging and marking services for military shipment of electric lanterns, fully compliant with MIL-STD-2073-1E and MIL-STD-129 standards to ensure proper handling, storage, and identification throughout the defense supply chain. These specifications dictate precise methods for material selection, protective wrapping, labeling, and documentation to meet stringent Department of Defense requirements for readiness and logistics efficiency. The work is classified as a subcontract under NAICS code 561990, indicating it falls under other support services, and is issued under the agency name CONSTRUCTION & EQUIPMENT MRO SVC I within the Department of Defense. All performance must align with federal standards for military logistics, without deviation from the mandated technical directives. The solicitation was posted on July 17, 2026, with a firm deadline for responses on July 24, 2026, leaving a one-week window for qualified vendors to submit proposals. The place of performance and specific delivery locations are not detailed, but the work is inherently tied to government shipment logistics, implying potential deployment to various domestic or international military sites. The contract is accessed through the DIBBS procurement portal, and while no point of contact or set-aside status is provided, interested parties must adhere strictly to the technical specs and timelines outlined in the official request to be considered for award.

All Other Support Services

POSTED

about 17 hours ago

DEADLINE

Electric Lantern Manufacturing and SupplyThe contract requires the manufacture and delivery of 107 electric lanterns that meet the military specification MIL-DTL-16377/53E, with the specific part number M16377/53-100.2L(W). These lanterns must be produced to exactly match the technical and quality standards defined in the military specification to ensure compatibility and reliability in operational environments. The work falls under NAICS code 335110, indicating it is categorized under electromagnetic and electronic equipment manufacturing, and is structured as a subcontract under the Department of Defense’s Construction & Equipment MRO SVC I program. The solicitation was posted on July 17, 2026, with a response deadline of July 24, 2026, allowing suppliers a narrow window to submit proposals. The place of performance and point of contact details are unspecified, but the contract is administered through the Defense Logistics Agency’s DIBBS system, with the official solicitation available via the provided link. All deliverables must be completed in full compliance with the military standard, and successful bidders will be expected to meet all contractual requirements without deviation, as noncompliance will result in rejection or termination.

Electric Lamp Bulb and Part Manufacturing

POSTED

about 17 hours ago

DEADLINE

Packaging and Marking ComplianceThe contract requires full compliance with MIL-STD-129 standards for the packaging, preservation, and marking of electric lanterns intended for shipment, ensuring all unit and container labels meet exact military specifications for identification, handling, and traceability. This includes proper labeling procedures, material preservation techniques to prevent damage during transit and storage, and coordination of handling logistics to maintain integrity throughout the supply chain. The work is structured as a subcontract under the NAICS code 561910, tied to the Department of Defense’s Construction & Equipment MRO SVC I agency, with responses due by July 24, 2026, and the solicitation posted on July 17, 2026. All activities must align strictly with military packaging protocols without deviation to ensure seamless integration into defense logistics systems.

Packaging and Labeling Services

POSTED

about 17 hours ago

DEADLINE

First Article Testing (FAT) ServicesThe contract requires independent environmental, performance, and durability testing of five electric lantern units to meet the exacting standards outlined in Table II of MIL-F-16377/53C, with an absolute requirement of zero non-conformances across all test parameters. This first article testing (FAT) is a critical quality assurance step to validate that the lantern units fully comply with military specifications before any production or procurement proceeds. Testing must be conducted by a qualified third party and result in formal, detailed reporting that documents all procedures, conditions, measurements, and outcomes to demonstrate adherence to the standard. The solicitation is issued under the NAICS code 541380 for other scientific and technical consulting services and is structured as a subcontract within the Department of Defense’s Construction & Equipment MRO Svc I framework. Proposals must be submitted by July 24, 2026, with the opportunity posted on July 17, 2026, leaving a narrow seven-day window for qualified vendors to respond. There is no specified set-aside type, meaning any eligible entity may bid, and the place of performance is not defined, suggesting testing may occur at the contractor’s accredited facility. The deliverable is not just completion of tests but a comprehensive, auditable formal report that conclusively proves zero deviations from requirements.

Testing Laboratories and Services

POSTED

about 17 hours ago

DEADLINE

Electric Lantern Manufacturing and SupplyThe contract calls for the manufacture and supply of fifty-five electric lanterns identified by NSN 6230-01-580-6495, must fully conform to the military specifications MIL-DTL-16377/53E and MIL-DTL-16377K SUP 1, encompassing all stages of production, rigorous testing, proper packaging, and timely delivery. The work is structured as a subcontract under the Department of Defense’s Construction & Equipment MRO SVC I, with the NAICS code 335110 indicating classification within the electrical equipment manufacturing sector. All deliverables must meet stringent defense standards to ensure operational reliability and durability under field conditions. The solicitation was posted on July 17, 2026, with responses due by July 24, 2026, leaving a one-week window for interested parties to submit proposals. The place of performance and organizational details are not specified in the provided data, but the contract is accessible via the DIBBS platform for further details. There is no set-aside designation indicated, meaning the opportunity is open to all qualified vendors without restriction based on business size or ownership type. The requirement emphasizes full compliance with technical specifications, quality assurance procedures, and delivery timelines critical to military logistics and readiness.

Electric Lamp Bulb and Part Manufacturing

POSTED

about 17 hours ago

DEADLINE

Logistics and Distribution SupportThe contract titled Logistics and Distribution Support requires coordination of shipments and receiving reporting through the Web–Based Application for Workflow (WAWF) to ensure timely and accurate delivery to Defense Logistics Agency distribution points. Compliance with proper marking standards and regulatory requirements is mandatory to facilitate seamless receipt and inventory management by DLA. This subcontract is part of a broader Department of Defense initiative under NAICS code 493190, focusing on support services related to logistics and distribution operations. The opportunity was posted on July 17, 2026, with a response deadline of July 24, 2026, and is solicited under the Construction & Equipment MRO SVC I agency framework. All performance activities are tied to DLA distribution points, and contractors must operate within strict compliance guidelines to ensure documentation, labeling, and reporting meet federal and defense logistics standards. The solicitation number is SPE8E926Q0588, and interested parties must utilize the provided DIBBS link for access to full submission details and requirements.

Other Warehousing and Storage

POSTED

about 17 hours ago

DEADLINE

Cybersecurity Compliance (CMMC Level 2 Self-Assessment)The contract requires the performance and documentation of a CMMC Level 2 self-assessment to ensure compliance with cybersecurity standards for protecting Covered Defense Information. This effort is mandatory under the terms of the subcontract and must be completed in accordance with the Cybersecurity Maturity Model Certification framework to meet Department of Defense requirements. The work is tied to NAICS code 541611, indicating it involves administrative management and general management consulting services, and is issued under the agency name Construction & Equipment MRO SVC I, which operates under the Department of Defense. The solicitation was posted on July 17, 2026, with a firm deadline for response on July 24, 2026, and the place of performance is not specified, implying flexibility in execution location as long as all compliance obligations are fulfilled. The task centers exclusively on internal assessment and documentation, not external audits or third-party validations, and participation is contingent on timely submission and accurate recordkeeping to demonstrate adherence to the CMMC Level 2 controls.

Administrative Management and General Management Consulting Services

POSTED

about 17 hours ago

DEADLINE

Technical Documentation and Design Compliance ServicesThis contract requires the provision of technical documentation and design compliance services to ensure all product designs and associated documentation meet military specifications and referenced drawings. The work is critical to maintaining standards for defense-related equipment, requiring precise adherence to regulatory and technical requirements outlined by the Department of Defense. The contractor must deliver accurate, complete, and vetted documentation that aligns with established military standards to support procurement, maintenance, and operational readiness. The contract is classified as a subcontract under NAICS code 541330, which pertains to engineering services, and is issued under the agency name CONSTRUCTION & EQUIPMENT MRO SVC I. Offers must be submitted by the response deadline of July 24, 2026, with the solicitation posted on July 17, 2026. The place of performance and point of contact details are not specified, and no set-aside preferences are indicated, meaning the opportunity is open to all qualified subcontractors regardless of business size or status. Interested parties must access the full solicitation through the provided DIBBS link to review detailed requirements and submission instructions.

Engineering Services

POSTED

about 17 hours ago

DEADLINE

Fibrous Cord Supply (Part Number 4020-01-273-0085)The contract is for the supply of fibrous cord identified by part number 4020-01-273-0085, with quantities specified per contract line item numbers. The product must comply with all applicable military packaging and labeling standards to ensure compatibility with defense logistics and distribution systems. This is a subcontract under the NAICS code 326199, which corresponds to other rubber product manufacturing, and is managed by the Department of Defense through the Construction & Equipment MRO SVC I organization. The solicitation was posted on July 17, 2026, with responses due by July 24, 2026, indicating a short window for proposal submission. The place of performance and point of contact details are not provided, but the contract is accessible via the DIBBS system under solicitation number SPE8E926Q0588 for further procurement information.

All Other Plastics Product Manufacturing

POSTED

about 17 hours ago

DEADLINE