This Solicitation opportunity from Department Of Defense was posted on July 16, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

SHEET, METAL

Closed

SPE8E9-26-Q-0576Federal

Submission Closed07/23/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 331315

New

DIBBS

Supply of Alloy 2219 T31 Aluminum SheetThis subcontract, issued by the DLA Fleet Readiness Center Southeast for the Department of Defense, involves the supply of high-strength Alloy 2219 T31 aluminum sheeting. The required materials must conform to AMS-QQ-A-250/30 Rev A and SAE AMS-QQ-A-250/30A Revision A specifications, with specific dimensions of .071 inches thick, 48 inches wide, and 144 inches long. The order consists of 26 sheets, which must be delivered with DD Form 1423 material certifications and undergo sampling according to MIL-STD-1916 or ASQ H1331 Table 1. The procurement is designated as a Total Small Business Set-Aside under NAICS code 331315, with the place of performance located in Jacksonville, Florida. Interested parties must respond by November 5, 2026.

DLA FLEET READINESS CENTER SOUTHEAST

POSTED

DEADLINE

Solicitation # SPE8E5-27-T-0339

Solicitation SPE8E5-27-T-0339 is a request for quotations from the Department of Defense, specifically DLA Troop Support, for the procurement of six units of POLE ASSY, D2 SS (NSN 5411015299306). The requirement specifies a delivery lead time of 167 days after the order, with a need ship date of April 26, 2027, and a final required delivery date of April 30, 2027. Delivery is FOB destination to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to DLA Master List technical and quality requirements, which take precedence over ASTM D3951 packaging standards. All shipments must be marked and labeled according to MIL-STD-129 and palletized per RP001. Environmental and safety compliance is critical, including a prohibition on the intentional addition of mercury and a requirement for Safety Data Sheets (SDS) and labels compliant with 29 C.F.R. 1910.1200 for any hazardous materials. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing and payment. The solicitation incorporates various FAR and DFARS clauses, including those regarding the Buy American Act, safeguarding covered defense information, and prohibitions on covered defense telecommunications equipment. Offers produced using additive manufacturing are ineligible for award. Quotes must be submitted via the DIBBS portal.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

HPG Vaporizer Fan Shroud Smooth Grating

Solicitation # 80NSSC27948324Q

The National Aeronautics and Space Administration, through the NASA Shared Services Center, is soliciting quotes for the procurement of 16 pieces of smooth surface aluminum grating. The materials are specified as Aluminum 6063-T52 or equivalent, with dimensions of 3/16 inch thickness, 1 inch height, 3 feet in width, and 24 feet in length. These components will be used to fabricate protective shrouds for the High Pressure Gas Facility Vaporizer fans at the Stennis Space Center in Mississippi to protect personnel and property from potential mechanical failures. This is a firm-fixed-price contract set aside for small businesses under NAICS code 331315. Award will be made based on the lowest price technically acceptable offer, provided the offeror is registered in the System for Award Management and meets all technical specifications. Delivery is required as FOB Destination to the SSC Weld Shop at Stennis Space Center. Quotes must be submitted to Tracy Bremer by November 4, 2026, and must include the contractor's UEI/Cage code, two points of contact, and the after-receipt-order delivery time. Payment terms are set at NET 30.

NASA Shared Services Center

POSTED

DEADLINE

Solicitation # SV0120-27

UNICOR, Federal Prison Industries, Inc., is soliciting quotes for a two-year, firm-fixed-price, indefinite delivery-indefinite quantity (IDIQ) contract for the procurement of commercial aluminum blanks. This requirement is 100% set aside for small businesses under NAICS 331315. The contract covers three specific types of 3105-H14 aluminum sheets, all .040 inches thick, yellow/yellow, and masked, with quantities ranging from 1,000 to 50,000 units depending on the dimensions and corner specifications. The government guarantees a contract minimum of 40,000 units across any combination of line items, with individual delivery orders ranging between 4,000 and 10,000 units. All items must be delivered FOB Destination to UNICOR in Cumberland, Maryland, and packaging must comply with ASTM D-3951-95 standards. Proposals are due by November 13, 2026, at 2:00 PM EST, and must be submitted to Contract Specialist Wesley Newell. Evaluation will be based on technical specifications, price, past performance, and delivery time, with technical and past performance weighted as more important than price. Required submission documents include a signed SF1449 with line-item pricing and lead times, signed amendments, company identification, SAM Unique Entity Identifier, and three business management questionnaires to verify past performance. Offerors must be registered in the System Award Management database and specify the country of origin and whether the materials were rolled or manufactured in the USA.

Dba Federal Prison Industries United States Department Of Justice

POSTED

DEADLINE

Aerospace Insulation Blanket Supplier (Boeing P/N 355T7210-27)This subcontract involves the manufacture or procurement of two specialized insulation blankets for the Department of Defense, specifically supporting DLA Weapons Support ASC projects. The items must strictly adhere to Boeing Part Number 355T7210-27 and National Stock Number 1660016935069, as they are classified as Critical Application Items. Performance takes place in New Cumberland, Pennsylvania, under NAICS code 331315. The supplier is required to maintain ISO 9001:2015 certification and FAA Airworthiness Approval to ensure quality and safety standards. Strict compliance is mandatory for supply chain traceability per DLAD Procurement Note C03, as well as packaging and marking requirements defined by MIL-STD-129 and MIL-STD-2073-1E. Responses for this requirement are due by November 3, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Supply of 3105-H14 Aluminum BlanksThis small business set-aside subcontract involves the supply of commercial aluminum blanks for prime contractors supporting UNICOR under the Department of Justice. The selected provider will be responsible for fabricating 3105-H14 aluminum sheets into blanks using CNC cutting or industrial shearing to achieve precise dimensions and corner radii. All materials and processes must adhere to Aluminum Sheet, Plate, and Foil Manufacturing standards, and the contractor must maintain an active SAM registration. The contract requires the delivery of at least 40,000 units to Cumberland, Maryland. Interested parties must submit their responses by November 13, 2026, in accordance with the solicitation posted on October 26, 2026. This opportunity falls under NAICS code 331315 and is specifically designated as a total set-aside for small businesses.

Dba Federal Prison Industries United States Department Of Justice

POSTED

DEADLINE

Supply of 2024-T3 Aluminum Alloy SheetsThis subcontract involves the supply of specialized 2024-T3 grade aluminum alloy sheets to prime contractors supporting the Defense Logistics Agency under the Department of Defense. The required materials must measure .063 inches in thickness, 48 inches in width, and 144 inches in length, with manufacturing strictly adhering to AMS-QQ-A-250/5 REV C aerospace material standards. A Certificate of Quality Conformance is mandatory to ensure all technical specifications are met. The procurement falls under NAICS code 331315, with the place of performance located in Cherry Point, zip code 28533-0021. The opportunity was posted on October 25, 2026, and requires a response by November 2, 2026.

Defense Logistics Agency

POSTED

DEADLINE

Aerospace Component Supply (Rotor, Servovalve)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC, requires the procurement of two aerospace rotors for servovalves, specifically part number 57802M from ITT Aerospace Controls LLC. The performance of the contract will take place in Tracy, California, under NAICS code 331315. The supplier must adhere to strict quality and compliance standards, including quality sampling per MIL-STD-1916 or ASQ H331 and packaging and marking requirements according to ASTM D3951, RP001, and MIL-STD-129. Additionally, the contractor is required to maintain Buy American Act compliance and provide a CMMC Level 2 self-assessment.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Solicitation # SPE7MC-27-T-1171

Solicitation SPE7MC-27-T-1171 is a request for quotations issued by DLA Distribution San Joaquin for the procurement of 36 screw thread inserts, identified by NSN 5325-01-374-8306. This requirement falls under NAICS code 331315 and is not a small business set-aside, although a price evaluation preference may be applied to HUBZone concerns. Quotes must be submitted via the DIBBS system by November 2, 2026. The required delivery date is July 15, 2027, with a delivery window of 254 days after order. Shipping is FOB Origin to the DLA Distribution San Joaquin facility in Tracy, California. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with a specific prohibition on the use of mercury or mercury compounds in preservation and packaging. Inspection and acceptance will occur at the destination per FAR 52.246-2, utilizing zero-based sampling plans. Contractors are required to use the Wide Area WorkFlow system for invoicing and payment. Key regulatory compliance includes DFARS 252.204-7012 for safeguarding covered defense information, the Buy American Act, and the Berry Amendment. Additionally, offerors must certify that they will not provide covered telecommunications equipment or services as per FAR 52.204-24.

POSTED

DEADLINE

Solicitation # SPE4A6-27-T-6649

Solicitation SPE4A6-27-T-6649 is a fixed-price procurement issued by the Defense Logistics Agency for the manufacture and supply of 83 screw thread inserts, identified by NSN 5325012611565. This is designated as a critical application item and must be produced in accordance with the current revision of the non-government part standard MS51832, specifically Revision E dated May 9, 2022, for part piece number MS51832A201L. The required delivery date and need ship date are both set for May 13, 2027, with delivery terms established as FOB Origin. The items are to be shipped to the DLA Distribution Depot Hill at Hill AFB, Utah, utilizing the First Destination Transportation program. Quality assurance is a primary focus of this contract, requiring a Certificate of Quality Compliance and adherence to Contract Data Requirements Lists and DD Form 1423s. Inspection and acceptance will occur at the origin, with the manufacturer's inspection system required to comply with SAE AS9003 or ISO 9001. Sampling plans must follow MIL-STD-1916 or MIL-STD-105/ASQ Z1.4, with a requirement for zero non-conformances in the sample lot. Packaging and palletization must comply with RP001 and MIL-STD-2073-1E, while marking must adhere to MIL-STD-129. Payment and invoicing will be processed electronically through the Wide Area Workflow system. This solicitation is not a small business set-aside, though it includes price evaluation preferences for certified HUBZone small business concerns.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Screw Thread Inserts (NSN 5325013748306)This subcontract involves the manufacture or distribution of 36 screw thread inserts, specifically NSN 5325013748306 and Leslie Controls part number 58417, for prime contractors supporting the Defense Logistics Agency. The agreement specifies that delivery will be handled as FOB Origin. Strict adherence to military standards is required for the fulfillment of this order. The contractor must perform packaging according to MIL-STD-2073-1E, marking per MIL-STD-129, and palletization per RP001, while applying quality assurance sampling based on MIL-STD-1916 or ASQ H1331.

POSTED

DEADLINE

HEAVY DUTY ALUMINUM FOIL

Solicitation # 52-IFB-2442507847-BLY

Solicitation 52-IFB-2442507847-BLY is an Invitation for Bid to establish an Agency Specific Term Contract for the North Carolina Department of Adult Correction, Central Supply Warehouse. The contract seeks a vendor to furnish and deliver heavy duty aluminum foil on an as-needed basis for distribution to prisons statewide. The initial term of the contract is three years, with an estimated total usage of 3,600 cases. The product must meet specific technical requirements, including a gauge of 0.00080 inches, alloy type 8111, and dimensions of 18 by 500 feet per case, utilizing spiral wound cores and a matte finish on one side. Deliveries must be made Free-On-Board Destination on pallets using only nylon banding, and cases must feature cardboard cutting edges. Bids are submitted via the Ariba Network Sourcing Tool by November 12, 2026. Award decisions will be based on the best value to the State, evaluating total cost, delivery promptness, and the vendor's responsibility and ability to meet specifications. Vendors must be registered in North Carolina in good standing and comply with various certifications, including E-Verify and drug-free workplace policies. Payment is contingent upon inspection and acceptance of the goods.

Department of Adult Correction

POSTED

6 days ago

DEADLINE

in 14 days

AI Contract Overview

The contract specifies the procurement of aluminum alloy metal sheets with precise dimensional and material requirements: 0.160 inches thick, 48 inches wide, 96 inches long, weighing 73.60 pounds per sheet, and must be supplied in whole-foot lengths only. Compliance with SAE AMS4268B, ASTM B666/B666M-20, ASTM B660-23, and ASTM B660 standards is mandatory, and the material must conform to alloy 2024 in temper T81. Every shipment requires a Certificate of Quality Compliance, which must accompany the product and be forwarded to the DLA Troop Support Contracting Officer. Continuous markings on each sheet are mandatory, including the DLA contract delivery order number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and exact dimensions. Markings must be legible, waterproof, and applied via stamping or stenciling without contaminating the material, and adhesive labels are permitted for small bars or tubes under 0.250 inches in nominal OD. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award, and deviations or use of non-approved suppliers incur risk of criminal penalties. The product is classified as a critical application item, and no test coupons are permitted. Packaging must comply with MIL-STD-2073-1E and Level A requirements of ASTM B660, including full corner and edge protection, robust fiberboard coverage, and marking per MIL-STD-129 and the purchase order text. Delivery is to Tinker AFB, Oklahoma, with a firm fixed price, zero variance in quantity, and a delivery window of 87 days after award date. Inspection and acceptance occur at destination, and government source inspection requirements are waived under the QSL program.

General Info

Aluminum alloy 2024-T81 sheets, 0.160x48x96 inches, QSLD suppliers only, strict marking and packaging, delivered to Tinker AFB in 87 days.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

NAICS

331315 - Aluminum Sheet, Plate, and Foil Manufacturing

Place of Performance

OK, USA

Set-Aside

NONE

Documents

RFQ SPE8E9-26-Q-0576 Metal Sheet Procurement

rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedJul 16

Solicitation

Response DeadlineJul 23

Deadline has passed

Submission Closed

07/23/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

Office AddressUSA

Contacts

DAMIAN PANTO

contact@example.gov

+1 (555) 000-0000

Full Description

METAL SHEET
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
Metal Certification Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. If CDRL-METALSCERT is missing from DLA Technical Data Management Transformation (TDMT) they can also be viewed in the DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
ALUMINUM ALLOY 0.160 IN THK 48 IN W 96 IN LG 73.60 LB/SH
A Certificate of Quality Compliance (Mill-Material Certification) is required. A copy of the Certificate of Quality Compliance shall be provided with every shipment to the customer or DLA depot, and a copy of the Certificate of Quality Compliance provided for each shipment shall be forwarded to the DLA Troop Support Contracting Officer identified on the award.
No sheets will be accepted unless they conform to exact dimensions per the item description: Test coupons are not allowed.
CONTINUOUS IDENTIFICATION MARKINGS ARE REQUIRED IN ADDITION TO THE MARKING REQUIREMENTS CITED IN THE PROCUREMENT SPECIFICATION:
AS A MINIMUM, EACH UNIT OF ISSUE (FEET,PLATE, OR SHEET) SHALL BE IDENTIFIED WITH THE (1) DLA CONTRACT DELIVERY ORDER NUMBER, (2) NSN, (3) SPECIFICATION NUMBER AND REVISION, (4) GRADE,CLASS & TYPE, ALLOY, PART NUMBER,DIE NUMBER, AND TEMPER, (5) MANUFACTURER'S NAME, HEAT AND LOT NUMBER, (6) DIMENSIONS.
MATERIAL SHALL BE SUPPLIED WITHIN THE REQUIRED MIN-MAX LENGTH REQUIREMENTS AND MUST IN WHOLE FEET LENGTH ONLY (I.E. 10, 11, OR 12 FT EVEN)
PERMISSIBLE MARKING METHODS ARE STAMPING (EXCEPT DIE STAMP) OR STENCILING. THE CHARACTERS SHALL BE OF SUCH A SIZE AS TO BE LEGIBLE AND VISIBLE TO THE UNAIDED EYE. THE MARKING FLUID APPLIED SHALL NOT CONTAMINATE, OR OTHERWISE HAVE A DETRIMENTAL EFFECT ON THE PRODUCT OR ITS PERFORMANCE. THE MARKINGS SHALL BE WATERPROOF AND SUFFICIENTLY STABLE TO WITHSTAND NORMAL HANDLING.
IN LIEU OF "LINE MARKINGS", ADHESIVE LABELS ARE REQUIRED FOR EACH UNIT OF STRAIGHT BARS, TUBES AND SHAPES, UNDER 0.250 INCHES IN NOMINAL OD, AND TO BE SECURELY FASTENED. TAGS WILL BE ACCEPTABLE METHOD FOR WIRES.
FAILURE TO COMPLY WILL BE CAUSE FOR REJECTION OF END PRODUCT."
SPE8E9-26-Q-0576
SECTION B
SUPPLY/SERVICE: 9535-00-508-8626 CONT'D
IY010: QUALIFIED SUPPLIERS LIST FOR DISTRIBUTORS (QSLD) REQUIREMENT (DLA TROOP SUPPORT JUNE 1994) FOR FSG'S 95 AND 96.
ONLY SUPPLIERS LISTED ON THE QSLD ARE ELIGIBLE FOR AN AWARD PURSUANT TO THIS SOLICITATION.
SUPPLIERS NOT QUOTING IN COMPLIANCE WITH THE QSLD REQUIREMENT MUST INDICATE THEY ARE DEVIATING FROM THE REQUIREMENTS OF THE SOLICITATION.
ANY BID/QUOTE/OFFER BASED ON A PRODUCT SUPPLIED BY OTHER THAN AN APPROVED QSL DISTRIBUTOR, EVEN THOUGH THE PRODUCT MIGHT HAVE BEEN MANUFACTURED IN ACCORDANCE WITH THE DRAWING(S) AND/OR SPECIFICATION(S) AS CITED IN THE PURCHASE ORDER TEXT (POT) IS A BID/QUOTE/OFFER WITH EXCEPTION AND MUST BE SO INDICATED BY THE QUOTER/OFFEROR.
ANY PRODUCT FURNISHED UNDER A CONTRACT OR ORDER FOR A PRODUCT DESIGNATED AS PART OF THE QSL PROGRAM, UNLESS SPECIFICALLY AUTHORIZED BY THE GOVERNMENT IN WRITING, MUST FULLY COMPLY WITH THE TERMS AND CONDITIONS OF THE QSL PROGRAM. ANY PRODUCT, WHICH DOES NOT FULLY COMPLY WILL BE CONSIDERED AN UNAUTHORIZED SUBSTITUTION, AND MAY YIELD CRIMINAL PENALTIES IN ADDITION TO ANY CIVIL REMEDIES AVAILABLE TO THE GOVERNMENT.
FOR THIS SOLICITATION, AND ANY RESULTING ORDER ISSUED TO AN APPROVED QSLM/QSLD SUPPLIER WHOSE QUOTE IS BASED ON COMPLIANCE WITH THE QSL PROGRAM, (EXCEPT IN THE CASE OF FMS (FOREIGN MILITARY SALE) REQUIREMENTS), REFERENCES TO SOURCE INSPECTION ARE HEREBY WAIVED. IN SUCH CASES, COQC, PVT, QAP-EQ003, ASQ H1331, AND RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS, IF REFERENCED, DO NOT APPLY.
FOR MORE INFORMATION ABOUT THE QSL PROGRAM GO TO THE FOLLOWING WEBSITE:
https://www.dla.mil/TroopSupport/IndustrialHardware/Engineering-and-Tech nical-services/Qualified-Suppliers-List/
-ORWRITE TO: DLA TROOP SUPPORT, ATTN: DLA TROOP SUPPORT FHTF, BLDG 3/B, 700 ROBBINS AVENUE, PHILADELPHIA, PA 19111-5092
Qualification requirements in procurement note #M03 Qualified Suppliers List for Manufacturers (QSLM)/Qualified Suppliers List for Distributors (QSLD) for Troop Support# apply. The full text of procurement note M03 can be found in the DLA Directive (DLAD) of Procurement Notes on the Web at: https://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx.
(END STO)
CRITICAL APPLICATION ITEM
TDP Rev B Gen 3 IAW BASIC NON GOVT STD SAE AMS4268B REVISION NR B DTD 12/10/2024 PART PIECE NUMBER: ALLOY 2024 TMPR T81
TDP Rev B Gen 3 IAW REFERENCE DRAWING NR 14153 01735 REVISION NR A DTD 05/09/2013 PART PIECE NUMBER:
TDP Rev B Gen 3 IAW REFERENCE QAP 13873 CDRL-METALSCERT-26124 REVISION NR DTD 12/04/2025 PART PIECE NUMBER:
TDP Rev B Gen 3 IAW REFERENCE NON GOVT STD SAE AMS-QQ-A-250/4B REVISION NR B DTD 02/01/2015 PART PIECE NUMBER:
TDP Rev B Gen 3 IAW REFERENCE NON GOVT STD ASTM B666/B666M-20 REVISION NR M DTD 11/01/2020 PART PIECE NUMBER:
SPE8E9-26-Q-0576
SECTION B
SUPPLY/SERVICE: 9535-00-508-8626 CONT'D
TDP Rev B Gen 3 IAW REFERENCE NON GOVT STD ASTM B660-23 REVISION NR DTD 11/01/2023 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT. 0001 9535-00-508-8626 5.000 SH $ ______________ $ ______________ SHEET,METAL
PRICING TERMS: Firm Fixed Price
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
FOB: ORIGIN DELIVERY DATE: 87 DAYS ADO
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:ZZ WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C UNIT CONT:00 OPI:A PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
MARKING IAW INFO LISTED IN THE POT AND ASTM B666
WHEN PREP FOR DELIVERY REQUIREMENTS SPECIFY CODE ZZ, PACKAGING SHALL BE IN ACCORDANCE WITH LEVEL A REQUIREMENTS OF ASTM B660 AND DISC DRAWING NUMBER 01735 PRESERVATION ZZ = IAW ASTM B660 MARKING Z = IAW ASTM B666 AND ADDITIONAL REQUIREMENTS STATED IN THE PURCHASE ORDER TEXT(POT).
UNIT OR INTERMEDIATE UNIT CONTAINER PACKAGING REQUIRES:
- ROBUST FOUR CORNER MATERIAL PROTECTION
- FULL COVERAGE MATERIAL SIDE EDGE PROTECTION
- FIBERBOARD OR BETTER TOP AND BOTTOM FULL COVERAGE MATERIAL PROTECTION
PARCEL POST ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA 3301 F AVE CEN REC BLDG 506 DR 22 TINKER AFB OK 73145-8000 US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3211
SPE8E9-26-Q-0576
SECTION B
SUPPLY/SERVICE: 9535-00-508-8626 CONT'D
DLA DISTRIBUTION DEPOT OKLAHOMA 3301 F AVE CEN REC BLDG 506 DR 22 TINKER AFB OK 73145-8000 US
GOVT USE External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date. 0001 7017427077 0001 N/A N/A N/A 07/08/2026

SPE8E9-26-Q-0576 NSN/Part Number: 9535-00-508-8626 Quantity: 5 SH Purchase Request: 7017427077QTY: 5 Delivery: 87 days ADO