Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

HPG Vaporizer Fan Shroud Smooth Grating

Active

80NSSC27948324QFederal

Response Deadline11/04/2026, 10:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The National Aeronautics and Space Administration, through the NASA Shared Services Center, is soliciting quotes for the procurement of 16 pieces of smooth surface aluminum grating. The materials are specified as Aluminum 6063-T52 or equivalent, with dimensions of 3/16 inch thickness, 1 inch height, 3 feet in width, and 24 feet in length. These components will be used to fabricate protective shrouds for the High Pressure Gas Facility Vaporizer fans at the Stennis Space Center in Mississippi to protect personnel and property from potential mechanical failures. This is a firm-fixed-price contract set aside for small businesses under NAICS code 331315. Award will be made based on the lowest price technically acceptable offer, provided the offeror is registered in the System for Award Management and meets all technical specifications. Delivery is required as FOB Destination to the SSC Weld Shop at Stennis Space Center. Quotes must be submitted to Tracy Bremer by November 4, 2026, and must include the contractor's UEI/Cage code, two points of contact, and the after-receipt-order delivery time. Payment terms are set at NET 30.

General Info

NASA seeks quotes from small businesses for 16 aluminum gratings for Stennis Space Center.

Agency

National Aeronautics And Space Administration → NASA Shared Services Center

NAICS

331315 - Aluminum Sheet, Plate, and Foil Manufacturing

Place of Performance

Stennis Space Center, MS, 39529, USA

Set-Aside

SBA

Documents

2

RFQ 80NSSC27948324Q - HPG Vaporizer Fan Shroud Smooth Grating

10 pages · rfq

High

SOW - Smooth Grating

sow

High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseCombined Synopsis

PostedOct 28

Combined Synopsis

Response DeadlineNov 4

Submission deadline

Response Deadline

11/04/2026, 10:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyNational Aeronautics And Space Administration → NASA Shared Services Center

Contacts1 person available

OfficeSTENNIS SPACE CENTER, MS, 39529, USA

Organization / AgencyNational Aeronautics And Space Administration → NASA Shared Services Center

Office AddressSTENNIS SPACE CENTER, MS, 39529, USA

Contacts

Tracy Bremer

contact@example.gov

Full Description

Show more

See attached RFQ and SOW

Similar Contracts

Same NAICS industry code

POLE ASSY, D2 SS

Solicitation # SPE8E5-27-T-0339

Solicitation SPE8E5-27-T-0339 is a request for quotations from the Department of Defense, specifically DLA Troop Support, for the procurement of six units of POLE ASSY, D2 SS (NSN 5411015299306). The requirement specifies a delivery lead time of 167 days after the order, with a need ship date of April 26, 2027, and a final required delivery date of April 30, 2027. Delivery is FOB destination to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to DLA Master List technical and quality requirements, which take precedence over ASTM D3951 packaging standards. All shipments must be marked and labeled according to MIL-STD-129 and palletized per RP001. Environmental and safety compliance is critical, including a prohibition on the intentional addition of mercury and a requirement for Safety Data Sheets (SDS) and labels compliant with 29 C.F.R. 1910.1200 for any hazardous materials. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing and payment. The solicitation incorporates various FAR and DFARS clauses, including those regarding the Buy American Act, safeguarding covered defense information, and prohibitions on covered defense telecommunications equipment. Offers produced using additive manufacturing are ineligible for award. Quotes must be submitted via the DIBBS portal.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

Aluminum Blanks

Solicitation # SV0120-27

UNICOR, Federal Prison Industries, Inc., is soliciting quotes for a two-year, firm-fixed-price, indefinite delivery-indefinite quantity (IDIQ) contract for the procurement of commercial aluminum blanks. This requirement is 100% set aside for small businesses under NAICS 331315. The contract covers three specific types of 3105-H14 aluminum sheets, all .040 inches thick, yellow/yellow, and masked, with quantities ranging from 1,000 to 50,000 units depending on the dimensions and corner specifications. The government guarantees a contract minimum of 40,000 units across any combination of line items, with individual delivery orders ranging between 4,000 and 10,000 units. All items must be delivered FOB Destination to UNICOR in Cumberland, Maryland, and packaging must comply with ASTM D-3951-95 standards. Proposals are due by November 13, 2026, at 2:00 PM EST, and must be submitted to Contract Specialist Wesley Newell. Evaluation will be based on technical specifications, price, past performance, and delivery time, with technical and past performance weighted as more important than price. Required submission documents include a signed SF1449 with line-item pricing and lead times, signed amendments, company identification, SAM Unique Entity Identifier, and three business management questionnaires to verify past performance. Offerors must be registered in the System Award Management database and specify the country of origin and whether the materials were rolled or manufactured in the USA.

Dba Federal Prison Industries United States Department Of Justice

POSTED

DEADLINE

Aerospace Insulation Blanket Supplier (Boeing P/N 355T7210-27)This subcontract involves the manufacture or procurement of two specialized insulation blankets for the Department of Defense, specifically supporting DLA Weapons Support ASC projects. The items must strictly adhere to Boeing Part Number 355T7210-27 and National Stock Number 1660016935069, as they are classified as Critical Application Items. Performance takes place in New Cumberland, Pennsylvania, under NAICS code 331315. The supplier is required to maintain ISO 9001:2015 certification and FAA Airworthiness Approval to ensure quality and safety standards. Strict compliance is mandatory for supply chain traceability per DLAD Procurement Note C03, as well as packaging and marking requirements defined by MIL-STD-129 and MIL-STD-2073-1E. Responses for this requirement are due by November 3, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Supply of 3105-H14 Aluminum BlanksThis small business set-aside subcontract involves the supply of commercial aluminum blanks for prime contractors supporting UNICOR under the Department of Justice. The selected provider will be responsible for fabricating 3105-H14 aluminum sheets into blanks using CNC cutting or industrial shearing to achieve precise dimensions and corner radii. All materials and processes must adhere to Aluminum Sheet, Plate, and Foil Manufacturing standards, and the contractor must maintain an active SAM registration. The contract requires the delivery of at least 40,000 units to Cumberland, Maryland. Interested parties must submit their responses by November 13, 2026, in accordance with the solicitation posted on October 26, 2026. This opportunity falls under NAICS code 331315 and is specifically designated as a total set-aside for small businesses.

Dba Federal Prison Industries United States Department Of Justice

POSTED

DEADLINE

Supply of 2024-T3 Aluminum Alloy SheetsThis subcontract involves the supply of specialized 2024-T3 grade aluminum alloy sheets to prime contractors supporting the Defense Logistics Agency under the Department of Defense. The required materials must measure .063 inches in thickness, 48 inches in width, and 144 inches in length, with manufacturing strictly adhering to AMS-QQ-A-250/5 REV C aerospace material standards. A Certificate of Quality Conformance is mandatory to ensure all technical specifications are met. The procurement falls under NAICS code 331315, with the place of performance located in Cherry Point, zip code 28533-0021. The opportunity was posted on October 25, 2026, and requires a response by November 2, 2026.

Defense Logistics Agency

POSTED

DEADLINE

Aerospace Component Supply (Rotor, Servovalve)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC, requires the procurement of two aerospace rotors for servovalves, specifically part number 57802M from ITT Aerospace Controls LLC. The performance of the contract will take place in Tracy, California, under NAICS code 331315. The supplier must adhere to strict quality and compliance standards, including quality sampling per MIL-STD-1916 or ASQ H331 and packaging and marking requirements according to ASTM D3951, RP001, and MIL-STD-129. Additionally, the contractor is required to maintain Buy American Act compliance and provide a CMMC Level 2 self-assessment.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

INSERT, SCREW THREAD

Solicitation # SPE7MC-27-T-1171

Solicitation SPE7MC-27-T-1171 is a request for quotations issued by DLA Distribution San Joaquin for the procurement of 36 screw thread inserts, identified by NSN 5325-01-374-8306. This requirement falls under NAICS code 331315 and is not a small business set-aside, although a price evaluation preference may be applied to HUBZone concerns. Quotes must be submitted via the DIBBS system by November 2, 2026. The required delivery date is July 15, 2027, with a delivery window of 254 days after order. Shipping is FOB Origin to the DLA Distribution San Joaquin facility in Tracy, California. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with a specific prohibition on the use of mercury or mercury compounds in preservation and packaging. Inspection and acceptance will occur at the destination per FAR 52.246-2, utilizing zero-based sampling plans. Contractors are required to use the Wide Area WorkFlow system for invoicing and payment. Key regulatory compliance includes DFARS 252.204-7012 for safeguarding covered defense information, the Buy American Act, and the Berry Amendment. Additionally, offerors must certify that they will not provide covered telecommunications equipment or services as per FAR 52.204-24.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

INSERT, SCREW THREAD

Solicitation # SPE4A6-27-T-6649

Solicitation SPE4A6-27-T-6649 is a fixed-price procurement issued by the Defense Logistics Agency for the manufacture and supply of 83 screw thread inserts, identified by NSN 5325012611565. This is designated as a critical application item and must be produced in accordance with the current revision of the non-government part standard MS51832, specifically Revision E dated May 9, 2022, for part piece number MS51832A201L. The required delivery date and need ship date are both set for May 13, 2027, with delivery terms established as FOB Origin. The items are to be shipped to the DLA Distribution Depot Hill at Hill AFB, Utah, utilizing the First Destination Transportation program. Quality assurance is a primary focus of this contract, requiring a Certificate of Quality Compliance and adherence to Contract Data Requirements Lists and DD Form 1423s. Inspection and acceptance will occur at the origin, with the manufacturer's inspection system required to comply with SAE AS9003 or ISO 9001. Sampling plans must follow MIL-STD-1916 or MIL-STD-105/ASQ Z1.4, with a requirement for zero non-conformances in the sample lot. Packaging and palletization must comply with RP001 and MIL-STD-2073-1E, while marking must adhere to MIL-STD-129. Payment and invoicing will be processed electronically through the Wide Area Workflow system. This solicitation is not a small business set-aside, though it includes price evaluation preferences for certified HUBZone small business concerns.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Screw Thread Inserts (NSN 5325013748306)This subcontract involves the manufacture or distribution of 36 screw thread inserts, specifically NSN 5325013748306 and Leslie Controls part number 58417, for prime contractors supporting the Defense Logistics Agency. The agreement specifies that delivery will be handled as FOB Origin. Strict adherence to military standards is required for the fulfillment of this order. The contractor must perform packaging according to MIL-STD-2073-1E, marking per MIL-STD-129, and palletization per RP001, while applying quality assurance sampling based on MIL-STD-1916 or ASQ H1331.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

HEAVY DUTY ALUMINUM FOIL

Solicitation # 52-IFB-2442507847-BLY

Solicitation 52-IFB-2442507847-BLY is an Invitation for Bid to establish an Agency Specific Term Contract for the North Carolina Department of Adult Correction, Central Supply Warehouse. The contract seeks a vendor to furnish and deliver heavy duty aluminum foil on an as-needed basis for distribution to prisons statewide. The initial term of the contract is three years, with an estimated total usage of 3,600 cases. The product must meet specific technical requirements, including a gauge of 0.00080 inches, alloy type 8111, and dimensions of 18 by 500 feet per case, utilizing spiral wound cores and a matte finish on one side. Deliveries must be made Free-On-Board Destination on pallets using only nylon banding, and cases must feature cardboard cutting edges. Bids are submitted via the Ariba Network Sourcing Tool by November 12, 2026. Award decisions will be based on the best value to the State, evaluating total cost, delivery promptness, and the vendor's responsibility and ability to meet specifications. Vendors must be registered in North Carolina in good standing and comply with various certifications, including E-Verify and drug-free workplace policies. Payment is contingent upon inspection and acceptance of the goods.

Department of Adult Correction

POSTED

DEADLINE

Aerospace Grade Material and Component SupplyThis subcontract opportunity, issued by the Department of Defense DLA Weapons Support ASC Supplier OEM Division, seeks a provider for aerospace-grade metals and hardware to support aircraft ramp projects. The selected supplier must provide raw materials and sub-components that strictly adhere to Goodrich P/N 470U100-2 specifications. To ensure quality and safety, all deliveries must include full traceability documentation, specifically Mill test reports and Certificates of Conformance, and the provider must maintain an AS9100 or ISO 9001 quality management system. The contract is designated as a Total Small Business Set-Aside under NAICS code 331315, with the place of performance located in New Cumberland. Interested parties must respond by October 30, 2026. This procurement focuses on the delivery of certified raw materials essential for prime contractors operating within the DLA Weapons Support framework.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Supply of Blue Gard 3200 Fiber Gasket SheetsThis subcontract involves the procurement of 49 asbestos-free fiber gasket sheets for prime contractors supporting DLA supply contracts. The specific requirement is for Garlock Inc Mechanical Packing Div 5L967 part number Blue Gard 3200 sheets, measuring 1/16 x 60 x 60 inches. All items must be packaged in waterproof, greaseproof, and opaque bags according to MIL-DTL-117, Type II, Class C, Style 1 standards, while maintaining compliance with FED-STD-313 and Buy American regulations. The contract is managed under the Department of Defense for the DLA Weapons Support Land Supplier Operations Vehicle Support agency. Delivery is designated as FOB Origin to DLA Distribution San Joaquin, with the place of performance located in Tracy, California. The solicitation is categorized under NAICS code 331315.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

More opportunities from National Aeronautics And Space Administration → NASA Shared Services Center

Same awarding agency

On-site System Installation and User TrainingThis subcontract, managed by the NASA Shared Services Center for the National Aeronautics and Space Administration, involves the on-site installation and user training for the DSA100E system at the Langley Research Center in Hampton, Virginia. The selected provider will be responsible for the physical setup, unpacking, and installation of the system, ensuring all instrument checks meet KRUSS specifications to deliver a fully commissioned and calibrated system. A critical requirement for this engagement is that the provider must hold factory-trained KRUSS certification. In addition to the technical setup, the contractor is required to provide between four and eight hours of operational training for prime contractors to ensure personnel are proficient in using the equipment. The solicitation was posted on October 28, 2026, with a response deadline of October 30, 2026, under NAICS code 811210.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 8 hours ago

DEADLINE

Desktop Instrument Control Module (COMPDESK)The Desktop Instrument Control Module subcontract, managed by the NASA Shared Services Center, provides specialized laboratory workstations for prime contractors operating on projects at the NASA Langley Research Center in Hampton, Virginia. Each workstation consists of a configured desktop computer and a 22 inch HD monitor, featuring Windows 11 Pro 64 bit, 16GB of RAM, and a 256GB SSD. To ensure immediate operational readiness, all systems come pre-installed with KRUSS ADVANCE software and are backed by a two year manufacturer warranty. This procurement falls under NAICS code 334111 and is designed to support technical instrument control requirements within the agency's research facilities.

Electronic Computer Manufacturing

POSTED

about 8 hours ago

DEADLINE

Kruss ADVANCE Software ModulesThis subcontract, managed by the NASA Shared Services Center, provides proprietary software licenses for prime contractors working on projects at the NASA Langley Research Center in Hampton. The scope of work includes the delivery, installation, and activation of specific software modules, namely AD3221 for Contact Angle, AD3223 for Surface and Interfacial Tension, and AD62 for Surface Free Energy. To ensure operational functionality, the software must be fully compatible with DSA100E hardware and provide comprehensive support for Young-Laplace models. The procurement falls under NAICS code 513210 and is designated for the support of specialized research and analysis within the agency.

Software Publishers

POSTED

about 8 hours ago

DEADLINE

Kruss Dynamic Surface Analyzer (DSA100E) SupplyThis subcontract through the NASA Shared Services Center involves the procurement and installation of a Kruss Dynamic Surface Analyzer DSA100E for prime contractors supporting projects at the NASA Langley Research Center in Hampton. The requirement is for a fully automatic, software-controlled contact angle goniometer consisting of a CF04 High Resolution/High Speed Camera, a CM3200 Optical system with manual zoom, and an FM3200 Standard frame. The delivered hardware system must be fully operational and meet specific technical performance standards, including a measuring range of 0.01 to 2000 mN/m with a resolution of 0.01 mN/m. This acquisition falls under NAICS code 334516 and is intended to provide critical measurement capabilities for agency research initiatives.

Analytical Laboratory Instrument Manufacturing

POSTED

about 8 hours ago

DEADLINE

Vertrod Thermal Impulse Pneumatic Heat Sealer SupplierThis 8(a) sole source subcontract through the NASA Shared Services Center involves the procurement of two Vertrod 48 PS Thermal Impulse Pneumatic Pivot Style Heat Sealer Machines for prime contractors operating at the NASA-Stennis Space Center. The required equipment must feature 48 inch seal lengths in both 3/8 inch and 1/2 inch widths, single side heater bars, and pneumatic low pressure jaw close safety systems. To meet operational standards, all machines must be compatible with ISO7 clean room environments. The supplier is responsible for delivering two fully configured and tested units, which include a 3 year limited warranty. This procurement falls under NAICS code 333993 and was posted on October 28, 2026, with a response deadline of November 2, 2026.

Packaging Machinery Manufacturing

POSTED

about 8 hours ago

DEADLINE

ISO 14952 Level 300A Precision CleaningThis small business set-aside subcontract involves providing high-level technical cleaning services for prime contractors supporting the NASA Shared Services Center. The primary objective is the precision cleaning of filter components to meet ISO 14952 latest revision level 300A standards, ensuring that all parts are free of residue and particle contamination for use in space-flight environments. To achieve these rigorous specifications, the contractor must utilize cleanroom facilities or specialized chemical cleaning baths. All delivered components must be accompanied by ISO 14952 Level 300A certification. This opportunity falls under NAICS code 811310 and is specifically designated as a total small business set-aside.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 8 hours ago

DEADLINE

Hydrostatic and Pneumatic Pressure Testing ServicesThis small business set-aside subcontract involves providing specialized hydrostatic and pneumatic pressure testing services for prime contractors supporting the NASA Shared Services Center. The scope of work requires the use of high-pressure rigs capable of exceeding 6000 PSI to conduct hydrostatic tests at 1.5 times the maximum allowable working pressure and pneumatic tests at 1.1 times the maximum allowable working pressure. Additionally, the contractor is responsible for performing non-destructive testing and inspections for nominal operating loads in strict accordance with ASME Boiler and Pressure Vessel Codes. All completed work must be documented through the delivery of certified test data and QC07 Evidence of Test reports.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 8 hours ago

DEADLINE

Supply of Norman Filter Company Repair Kits (P/N: KIT-45-588-M)This small business set-aside subcontract involves the procurement and delivery of Norman Filter Company repair kits, part number KIT-45-588-M, to support prime contractors on NASA Shared Services Center projects at the Kennedy Space Center. The required kits must be constructed from 316/316L Stainless Steel conforming to AMS QQ-S-763, featuring PTFE O-rings and wire pleated woven wire mesh. To ensure safety and quality, all supplies must adhere to the ASME Boiler and Pressure Vessel Code and maintain a 4:1 Burst Pressure Safety Factor. The successful contractor is required to provide both a Manufacturer’s Certificate of Compliance and Pressure Vessel Certification. The solicitation was posted on October 28, 2026, with a response deadline of November 4, 2026.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 8 hours ago

DEADLINE

Supply of Pfeiffer HiScroll Main Power CablesThis small business set-aside subcontract involves the procurement and delivery of 22 OEM power cables for the NASA Shared Services Center in Orlando. The required hardware consists of Pfeiffer Vacuum part number 2000028160, which are 115V AC mains cables featuring NEMA 5-15 straight plugs, C13 straight connectors, and a length of 3 meters. To qualify for the contract, providers must submit written manufacturer authorization from Pfeiffer Vacuum to resell the equipment along with proof of manufacturer pricing. The solicitation was posted on October 28, 2026, with a response deadline of November 3, 2026, falling under NAICS code 423610.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 8 hours ago

DEADLINE

Supply of Pfeiffer HiScroll 6 Comfort Vacuum Pump BundlesThis small business set-aside subcontract involves the procurement and delivery of 22 brand-name Pfeiffer vacuum pump bundles for the NASA Shared Services Center. Specifically, the contractor is required to provide 22 units of OEM Part number 2000199039, identified as HISCROLL 6 COMFORT DN25 ISO-KF Bundles, delivered FOB Destination to the NASA Kennedy Space Center in Orlando. To qualify, the provider must submit written manufacturer authorization from Pfeiffer Vacuum to resell the equipment along with proof of manufacturer pricing. The contract falls under NAICS code 423830 and is designated as a total small business set-aside.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 8 hours ago

DEADLINE

Supply of Haskel Booster System Model 80512This subcontract, issued by the NASA Shared Services Center, requires the procurement and delivery of one brand-name Haskel Booster System Model 80512 to the NASA Stennis Space Center. The selected provider must source the hardware directly from Haskel International, Inc., ensure full compliance with the Statement of Work, and provide a Certificate of Conformance upon delivery. To be eligible, contractors must provide proof of pricing and official manufacturer authorization to resell the equipment. The opportunity is designated as a Total Small Business Set Aside under NAICS code 423830. Due to the nature of the hardware, the contractor must strictly adhere to all ITAR and EAR export control laws. Interested parties must submit their responses by November 3, 2026.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 8 hours ago

DEADLINE

Sport Medical Isokinetic System 4 Pro SupplierThis subcontract through the NASA Shared Services Center requires the procurement and delivery of one Sport Medical Isokinetic System 4 Pro, specifically OEM Part 850-000. The equipment is intended for prime contractors working on NASA Johnson Space Center projects to replace an existing Biodex system, ensuring the scientific continuity of longitudinal datasets. To guarantee adherence to OEM specifications, the supplier must be an authorized provider or distributor. The selected vendor is responsible for delivering a fully functional system to Building 419 at the Johnson Space Center in Houston, Texas. This procurement falls under NAICS code 423450, with a response deadline set for November 2, 2026.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 8 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS