Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Kruss Dynamic Surface Analyzer (DSA100E) Supply

Active

Federal

Response Deadline10/30/2026, 03:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract through the NASA Shared Services Center involves the procurement and installation of a Kruss Dynamic Surface Analyzer DSA100E for prime contractors supporting projects at the NASA Langley Research Center in Hampton. The requirement is for a fully automatic, software-controlled contact angle goniometer consisting of a CF04 High Resolution/High Speed Camera, a CM3200 Optical system with manual zoom, and an FM3200 Standard frame. The delivered hardware system must be fully operational and meet specific technical performance standards, including a measuring range of 0.01 to 2000 mN/m with a resolution of 0.01 mN/m. This acquisition falls under NAICS code 334516 and is intended to provide critical measurement capabilities for agency research initiatives.

General Info

Procurement and installation of a Kruss DSA100E goniometer for NASA Langley Research Center.

Agency

National Aeronautics And Space Administration → NASA Shared Services Center

NAICS

334516 - Analytical Laboratory Instrument Manufacturing

Place of Performance

Hampton, VA, 23681, USA

Set-Aside

NONE

Documents

This scope was carved out of 80NSSC27948242Q.

The full solicitation package (3 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Kruss Dynamic Analyzer

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 28

subcontract

Response DeadlineOct 30

Submission deadline

Response Deadline

10/30/2026, 03:00:00 PM UTCin 1 day

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyNational Aeronautics And Space Administration → NASA Shared Services Center

ContactsNo contacts available

OfficeN/A

Organization / AgencyNational Aeronautics And Space Administration → NASA Shared Services Center

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies a fully automatic, software-controlled contact angle goniometer for prime contractors on NASA Langley Research Center projects. Delivers the DSA100E system including CF04 High Resolution/High Speed Camera, CM3200 Optical system with manual zoom, and FM3200 Standard frame. Equipment must meet measuring range of 0.01-2000 mN/m with 0.01 mN/m resolution. Delivers the installed and operational hardware system.

Similar Contracts

Same NAICS industry code

Hydraulic Fluid Contamination Analysis Kit SupplierThis subcontract opportunity is for the supply of six complete hydraulic fluid contamination analysis kits to support prime contractors on DLA Troop Support Medical Supply Chain projects. The supplier is responsible for manufacturing or sourcing kits that strictly adhere to NSN 6630001506486 specifications and comply with DLA Master List of Technical and Quality Requirements RA001, RP001, RQ001, and RQ011. The successful contractor must possess the necessary hydraulic fluid analysis instrumentation to ensure all deliverables meet these technical standards. Managed by the Department of Defense under the Medical Supply Chain FSH, this project is designated as a Total Small Business Set-Aside under NAICS code 334516. Performance will take place in Jacksonville, Florida. Interested parties must submit their responses by the deadline of November 4, 2026.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 5 hours ago

DEADLINE

Supplier of Aircraft Cockpit Lights (NSN 6220016516453)This subcontract involves the manufacture or distribution of 41 specialized aircraft cockpit lighting units for prime contractors supporting DLA Distribution Depot Oklahoma projects. The required components are identified by NSN 6220016516453 and Hoffman Engineering part number 721-1237-1028, with performance taking place at Tinker AFB. The contract is designated as a Total Small Business Set-Aside under NAICS code 334516. All supplied units must strictly adhere to the DLA Master List technical and quality requirements as well as Buy American regulations. The response deadline for this Department of Defense opportunity is November 9, 2026.

POSTED

about 5 hours ago

DEADLINE

Electrode Assembly Fabrication (NSN 6160-01-118-4721)This subcontract, issued by the Department of Defense for the DDSP New Cumberland Facility, requires the fabrication of seven warranted electrode assemblies under NSN 6160-01-118-4721 and Evoqua part number W3T105304. The project involves precision machining of critical application items that must strictly adhere to RA001 technical requirements and RQ017 marking standards for bare items. Quality assurance is governed by MIL-STD-105/ASQ Z1.4 standards to ensure all deliverables meet rigorous military specifications. The opportunity is designated as a Women-Owned Small Business set-aside under NAICS code 334516. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by November 9, 2026, to provide the necessary manufacturing capabilities to support these DLA supply contract requirements.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 5 hours ago

DEADLINE

GAGE, WING FOLD JURY

Solicitation # SPE8E5-27-T-0357

Solicitation SPE8E5-27-T-0357 is a federal procurement issued by the DLA Troop Support Construction and Equipment office for one Wing Fold Jury Gage, identified by NSN 5220-00-922-6223 and Northrop Grumman part number 123GT10191. The requirement is not a small business set-aside. The original required delivery date is October 26, 2026, with a delivery window of five days after the award. The item must be shipped via the fastest traceable means to the DLA Receiving Officer at Naval Base Coronado in San Diego, California, with FOB terms set to destination. The contract mandates strict adherence to quality and packaging standards, requiring compliance with ASTM D3951 and MIL-STD-129 for marking and labeling, while noting that the DLA Master List of Technical and Quality Requirements takes precedence. Key regulatory requirements include the Buy American Act, DFARS cybersecurity standards for safeguarding covered defense information, and the use of the Wide Area Workflow system for electronic invoicing and payment. Inspection and acceptance will occur at the destination point. All quotes must be submitted through the DIBBS portal.

DLA RECEIVING OFFICER NAVAL BASE CORONADO BLDG

POSTED

about 5 hours ago

DEADLINE

ANALYSIS KIT, HYDRAULIC

Solicitation # SPE2DH-27-T-0296

Solicitation SPE2DH-27-T-0296 is a total small business set-aside request for quotations issued by the DLA Troop Support Medical Supply Chain for the procurement of six hydraulic fluid contamination analysis kits, identified by NSN 6630001506486. The required delivery date is February 19, 2027, with a need ship date of February 14, 2027. Delivery is established as FOB Destination to DLA Distribution Jacksonville, Florida. The contract requires adherence to specific technical and quality standards, including RA001, RP001, RQ001, and RQ011 from the DLA Master List of Technical and Quality Requirements. Packaging must be commercial and utilize suitable sealed unit containers and exterior shipping containers to prevent damage. All materials must be marked according to Medical Marking Standard No. 1, which supersedes MIL-STD-129, and bar codes must comply with ISO/IEC 16388. Palletization must follow MIL-STD-147 for shipments exceeding 250 lbs or 20 cubic feet, and all wood packaging materials must be heat-treated or kiln-dried per clause 52.247-9012. Inspection and acceptance will occur at the destination. Invoicing and payment processing are to be handled electronically through the Wide Area WorkFlow system.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 5 hours ago

DEADLINE

Jess Automated Western Blot System SupplyThis subcontract involves the supply of the Jess Automated Western Blot System for prime contractors working on Department of Veterans Affairs medical center projects. The scope of work includes the manufacture, testing, and delivery of a single installed and operational immunoassay platform. This system utilizes capillary electrophoresis hardware and automated fluidics to combine protein size separation with high-sensitivity immunodetection. Managed by the Department of Veterans Affairs Network Contracting Office 6 under NAICS code 334516, the opportunity was posted on October 28, 2026. Interested parties must submit their responses by the deadline of November 3, 2026.

246-NETWORK Contracting Office 6 (36C246)

POSTED

about 10 hours ago

DEADLINE

Proteomics Analysis System Manufacturing & Software IntegrationThis subcontract through the National Institutes of Health Olao involves the manufacturing and software integration of one automated high-throughput proteomics analysis system. The hardware must adhere to specific physical constraints, maintaining a footprint no larger than 1143mm x 661mm x 1016mm and a maximum weight of 250kg. The final deliverable must be a fully functional system featuring integrated ARGO Command Center and NULISA Analysis Software, along with an API to support custom method development. To ensure quality and safety standards, the provider must hold several certifications, including ISO 13485, ISO 9001, EMC, UL, CE, and WEEE. This project falls under NAICS code 334516 and is intended for prime contractors working on NIH projects. Interested parties should note the response deadline of November 6, 2026.

National Institutes Of Health Olao

POSTED

about 10 hours ago

DEADLINE

Laboratory Instrumentation & Platform HardwareThis subcontract opportunity involves the supply and installation of technology platforms and hardware for prime contractors supporting USDA Food Safety and Inspection Service projects. The scope of work focuses on delivering fully operational laboratory instrumentation, including physical analytical platforms such as sequencers, PCR machines, and automated analyzers. The selected provider is responsible for the complete installation and configuration of this equipment, ensuring all power and footprint requirements are met. All integrated information and communication technology must comply with Revised 508 Standards and WCAG 2.0. The project is categorized under NAICS code 334516 and will be performed in Athens, Georgia. Interested parties must submit their responses by the deadline of December 8, 2026.

Usda, Fsis, Oas Pcmb

POSTED

about 10 hours ago

DEADLINE

in about 1 month

UH-60 Blade De-Ice (BDI) Test Program Set ManufacturerThis subcontract, issued by the Department of Defense under the W7MX Uspfo Activity Ca Arng, involves the supply and configuration of specialized test program sets for prime contractors supporting California Army National Guard projects. The primary objective is to validate command signals and high-power AC electrical paths for the UH-60L/M Blade De-Ice system. Specifically, the contractor is responsible for developing OTPS part numbers 991-OTP-00014-02 and 991-OTP-00119-01 to facilitate the testing of Control Panels and BDI Distributors. The final deliverables must be fully functional OTPS units, which include necessary Test Adapter Cables and software provided on CD-ROM. This effort falls under NAICS code 334516 and is to be performed in the 93727 zip code area. The solicitation was posted on October 28, 2026, with a response deadline of November 10, 2026.

W7MX Uspfo Activity Ca Arng

POSTED

about 10 hours ago

DEADLINE

UH-60 Relay Panel Test Program Set (TPS) ManufacturerThis subcontract, issued by the Department of Defense under the W7MX Uspfo Activity Ca Arng, requires the manufacture and configuration of specialized test program sets for prime contractors supporting California Army National Guard projects. The primary objective is to validate the electrical integrity of both Right-Hand and Left-Hand relay panels for the UH-60L/M Black Hawk helicopter. Specifically, the contractor must develop Test Program Sets P/N 991-000-00139-02 and 991-OTP-00120-01 to ensure proper circuit continuity and relay actuation. The final deliverables must be fully functional and include the Test Interface Assembly, necessary software provided on CD-ROM, and all required Test Adapter Cables. This procurement falls under NAICS code 334516, with performance taking place in zip code 93727. Interested parties must respond by the deadline of November 10, 2026.

W7MX Uspfo Activity Ca Arng

POSTED

about 10 hours ago

DEADLINE

TekVPI Compatible Probe SuiteThis subcontract with the National Aeronautics and Space Administration involves the procurement of a TekVPI Compatible Probe Suite to support prime contractors at the NASA Ames Research Center. The requirement consists of five specialized probes and accessory kits, including 8-channel general purpose logic probes, 1 GHz isolated current probes, AC/DC current probes, 1 GHz differential probes, and 1.5 GHz active single-ended probes. All provided equipment must utilize the TekVPI common probe interface, and the TCP0030A specifically requires a Certificate of Traceable Calibration. The project falls under NAICS code 334516 and is associated with performance location 94035.

National Aeronautics And Space Administration

POSTED

about 10 hours ago

DEADLINE

MSO44B 4 Series Mixed Signal Oscilloscope & Software BundleThis subcontract involves the procurement of an MSO44B 4 Series Mixed Signal Oscilloscope and Software Bundle to support prime contractors on projects at the NASA Ames Research Center. The delivery includes a high-performance oscilloscope unit equipped with four FlexChannels and a 1 GHz bandwidth option. To ensure measurement accuracy, the system must be delivered with a Certificate of Traceable Calibration. The bundle further provides perpetual node-locked software licenses under the Ultimate tier, specifically covering power, jitter/eye, and serial protocol analysis. This fully configured hardware and software package is categorized under NAICS code 334516 and is intended for use at the NASA facility located in zip code 94035.

National Aeronautics And Space Administration

POSTED

about 10 hours ago

DEADLINE

More opportunities from National Aeronautics And Space Administration → NASA Shared Services Center

Same awarding agency

Environmental Regulatory Review and ARARS Analysis Support

Environmental Consulting Services

POSTED

about 10 hours ago

DEADLINE

On-site System Installation and User TrainingThis subcontract, managed by the NASA Shared Services Center for the National Aeronautics and Space Administration, involves the on-site installation and user training for the DSA100E system at the Langley Research Center in Hampton, Virginia. The selected provider will be responsible for the physical setup, unpacking, and installation of the system, ensuring all instrument checks meet KRUSS specifications to deliver a fully commissioned and calibrated system. A critical requirement for this engagement is that the provider must hold factory-trained KRUSS certification. In addition to the technical setup, the contractor is required to provide between four and eight hours of operational training for prime contractors to ensure personnel are proficient in using the equipment. The solicitation was posted on October 28, 2026, with a response deadline of October 30, 2026, under NAICS code 811210.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 10 hours ago

DEADLINE

Desktop Instrument Control Module (COMPDESK)The Desktop Instrument Control Module subcontract, managed by the NASA Shared Services Center, provides specialized laboratory workstations for prime contractors operating on projects at the NASA Langley Research Center in Hampton, Virginia. Each workstation consists of a configured desktop computer and a 22 inch HD monitor, featuring Windows 11 Pro 64 bit, 16GB of RAM, and a 256GB SSD. To ensure immediate operational readiness, all systems come pre-installed with KRUSS ADVANCE software and are backed by a two year manufacturer warranty. This procurement falls under NAICS code 334111 and is designed to support technical instrument control requirements within the agency's research facilities.

Electronic Computer Manufacturing

POSTED

about 10 hours ago

DEADLINE

Kruss ADVANCE Software ModulesThis subcontract, managed by the NASA Shared Services Center, provides proprietary software licenses for prime contractors working on projects at the NASA Langley Research Center in Hampton. The scope of work includes the delivery, installation, and activation of specific software modules, namely AD3221 for Contact Angle, AD3223 for Surface and Interfacial Tension, and AD62 for Surface Free Energy. To ensure operational functionality, the software must be fully compatible with DSA100E hardware and provide comprehensive support for Young-Laplace models. The procurement falls under NAICS code 513210 and is designated for the support of specialized research and analysis within the agency.

Software Publishers

POSTED

about 10 hours ago

DEADLINE

Quantum Support Contract Reinstatement

Other Computer Related Services

POSTED

about 10 hours ago

DEADLINE

Onsite Installation of Quantum Customer Replaceable Units (CRUs)

Other Electronic and Precision Equipment Repair and Maintenance

POSTED

about 10 hours ago

DEADLINE

Quantum Scalar 3 Library Maintenance and Support Services

Other Electronic and Precision Equipment Repair and Maintenance

POSTED

about 10 hours ago

DEADLINE

Vertrod Thermal Impulse Pneumatic Heat Sealer SupplierThis 8(a) sole source subcontract through the NASA Shared Services Center involves the procurement of two Vertrod 48 PS Thermal Impulse Pneumatic Pivot Style Heat Sealer Machines for prime contractors operating at the NASA-Stennis Space Center. The required equipment must feature 48 inch seal lengths in both 3/8 inch and 1/2 inch widths, single side heater bars, and pneumatic low pressure jaw close safety systems. To meet operational standards, all machines must be compatible with ISO7 clean room environments. The supplier is responsible for delivering two fully configured and tested units, which include a 3 year limited warranty. This procurement falls under NAICS code 333993 and was posted on October 28, 2026, with a response deadline of November 2, 2026.

Packaging Machinery Manufacturing

POSTED

about 10 hours ago

DEADLINE

ISO 14952 Level 300A Precision CleaningThis small business set-aside subcontract involves providing high-level technical cleaning services for prime contractors supporting the NASA Shared Services Center. The primary objective is the precision cleaning of filter components to meet ISO 14952 latest revision level 300A standards, ensuring that all parts are free of residue and particle contamination for use in space-flight environments. To achieve these rigorous specifications, the contractor must utilize cleanroom facilities or specialized chemical cleaning baths. All delivered components must be accompanied by ISO 14952 Level 300A certification. This opportunity falls under NAICS code 811310 and is specifically designated as a total small business set-aside.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 10 hours ago

DEADLINE

Hydrostatic and Pneumatic Pressure Testing ServicesThis small business set-aside subcontract involves providing specialized hydrostatic and pneumatic pressure testing services for prime contractors supporting the NASA Shared Services Center. The scope of work requires the use of high-pressure rigs capable of exceeding 6000 PSI to conduct hydrostatic tests at 1.5 times the maximum allowable working pressure and pneumatic tests at 1.1 times the maximum allowable working pressure. Additionally, the contractor is responsible for performing non-destructive testing and inspections for nominal operating loads in strict accordance with ASME Boiler and Pressure Vessel Codes. All completed work must be documented through the delivery of certified test data and QC07 Evidence of Test reports.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 10 hours ago

DEADLINE

Supply of Norman Filter Company Repair Kits (P/N: KIT-45-588-M)This small business set-aside subcontract involves the procurement and delivery of Norman Filter Company repair kits, part number KIT-45-588-M, to support prime contractors on NASA Shared Services Center projects at the Kennedy Space Center. The required kits must be constructed from 316/316L Stainless Steel conforming to AMS QQ-S-763, featuring PTFE O-rings and wire pleated woven wire mesh. To ensure safety and quality, all supplies must adhere to the ASME Boiler and Pressure Vessel Code and maintain a 4:1 Burst Pressure Safety Factor. The successful contractor is required to provide both a Manufacturer’s Certificate of Compliance and Pressure Vessel Certification. The solicitation was posted on October 28, 2026, with a response deadline of November 4, 2026.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 10 hours ago

DEADLINE

McMurdo Station Flight Support ServicesThe McMurdo Station Flight Support Services subcontract, managed by the NASA Shared Services Center, involves providing specialized on-site technical personnel to support prime contractors on NASA Goddard Space Flight Center balloon mission projects in Antarctica. The scope of work includes performing compatibility testing, the physical commissioning of gondola systems, and providing critical launch support within a polar environment. The primary objective is to deliver technical expertise and the final launch readiness sign-off to ensure mission success. Due to the extreme nature of the work location, all assigned personnel are required to successfully pass rigorous medical and psychological screenings necessary for Antarctic travel. This opportunity is categorized under NAICS code 541690 and requires a response by November 2, 2026.

Other Scientific and Technical Consulting Services

POSTED

about 10 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS