Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Aluminum Bronze Flat Bar Supplier

Active

Federal

Response Deadline11/13/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This small business set-aside subcontract involves the supply of precision-cut aluminum bronze flat bars for prime contractors supporting Army Contracting Command projects at the Watervliet Arsenal. The scope of work requires the manufacture or sourcing of specific alloys, including C62400 per ASTM B150, C95400HT, or C95500 per ASTM B 505/B 505M. Strict precision cutting tolerances are mandated at +/-.05 inches for length and +/-.02 inches for width and thickness. The contractor is responsible for delivering a total of 72 units accompanied by Certified Test Reports. Compliance with the Buy American Act and MIL-STD-129 marking standards is required. This Department of Defense opportunity falls under NAICS code 331315 and is designated for small business entities.

General Info

Small business subcontract for 72 precision-cut aluminum bronze flat bars for Army projects.

Agency

Department Of Defense → W6QK Acc Wva

NAICS

331315 - Aluminum Sheet, Plate, and Foil Manufacturing

Place of Performance

NY, 12118

Set-Aside

SBA

Documents

This scope was carved out of W911PT27QA023.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Aluminum Bronze Strip for the Watervliet Arsenal

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 3

subcontract

Response DeadlineNov 13

Submission deadline

Response Deadline

11/13/2026, 09:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W6QK Acc Wva

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → W6QK Acc Wva

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies precision-cut aluminum bronze flat bars for prime contractors on Army Contracting Command at Watervliet Arsenal projects. Manufactures or sources alloys C62400 per ASTM B150, C95400HT, or C95500 per ASTM B 505/B 505M. Performs precision cutting to +/-.05" length and +/-.02" width/thickness tolerances. Adheres to MIL-STD-129 marking and Buy American Act. Delivers 72 total units and Certified Test Reports.

Similar Contracts

Same NAICS industry code

Supply of Hazardous Material Absorbent Pads (NSN 4235-01-543-9092)This subcontract involves the manufacture and supply of hazardous material absorbent pads under NSN 4235-01-543-9092 for the DLA Weapons Support Nuclear Reactor Program. The contractor is responsible for producing 27 rolls of absorbent material, each measuring 38 inches wide, 0.375 inches thick, and 144 feet in length. To meet environmental and legal standards, the products must be made from 100 percent recovered material in accordance with RCRA and EPA regulations, and the contractor must ensure full compliance with the Buy American Act and provide Recovered Material Certification. All items must be packaged and marked according to MIL-PRF-23199E, MIL-STD-129, and DLA RP001 specifications. The delivery terms are FOB Origin, with the final destination being DLA Distribution DDSP New Cumberland. This procurement falls under NAICS code 331315 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 1 hour ago

DEADLINE

Supply of Aluminum Alloy 2024 TMPR T3 Metal SheetsThis subcontract, managed by Construction & Equipment MRO SVC I for the Department of Defense, involves the supply of high-specification aluminum alloy 2024 TMPR T3 metal sheets for defense procurement projects. The required materials must be 0.125 inches by 48 inches by 144 inches and strictly adhere to SAE AMS-QQ-A-250/4B, ASTM B666/B666M-20, and ASTM B660-23 standards. The delivery consists of two sheets accompanied by a Certificate of Quality Compliance. Compliance requirements include QSLD certification and packaging that meets MIL-STD-2073-1E specifications. The place of performance is located in New Cumberland, Pennsylvania. Interested parties must note the response deadline of November 16, 2026, for this procurement under NAICS code 331315.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 1 hour ago

DEADLINE

Aluminum Bronze Strip for the Watervliet Arsenal

Solicitation # W911PT27QA023

Solicitation W911PT27QA023 is a total small business set-aside for the procurement of Aluminum Bronze Strip flat bars to support the Watervliet Arsenal in Watervliet, New York. The requirement consists of two line items: 38 flat bars measuring 49.55 inches long by 0.76 inches wide by 0.197 inches thick, and 34 flat bars measuring 49.55 inches long by 0.51 inches wide by 0.197 inches thick. Materials must conform to Aluminum Bronze C62400 per ASTM B150, or alternatively C95400HT or C95500 per ASTM B 505/B 505M, meeting specific minimums for tensile strength, yield strength, elongation, and Rockwell hardness. A Certified Test Report detailing all chemical and mechanical tests must accompany each shipment. The government intends to award a single Firm Fixed Price purchase order to the responsible offeror providing the lowest evaluated bid that meets all material requirements. Delivery is required within 60 calendar days from the date of award, with shipping terms set as FOB Destination. All items must be marked with unique item identifiers using two-dimensional data matrix symbology and labeled according to MIL-STD-129. Submissions must be made electronically via the PIEE Solicitation Module and must offer the total quantity of items to be considered for award.

POSTED

about 6 hours ago

DEADLINE

Aircraft-Grade Aluminum Plate SupplyThis subcontract involves the supply of raw aircraft-grade aluminum structural plate material to prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper OEM Division. The materials must strictly adhere to the technical data specified under NSN 1560012742326 to meet rigorous aerospace structural standards. To ensure full compliance, the provider is required to furnish complete material certifications and Mill Test Reports for all delivered stock. The performance of this contract is centered at Tinker AFB, zip code 73145-8000. Interested parties should note that the response deadline is November 10, 2026, and the procurement falls under NAICS code 331315.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Solicitation # SPE8E9-27-T-0413

Solicitation SPE8E9-27-T-0413 is a request for quotations issued by DLA Troop Support for the procurement of aluminum alclad metal sheets (NSN 9535-002320379). The requirement consists of two line items totaling 35 sheets, with 6 sheets destined for DLA Distribution Warner Robins and 29 sheets for DLA Distribution Depot Oklahoma. The material must be 0.063 inches thick, 60 inches wide, and 144 inches long, featuring a 0.0016 cladding thickness on both sides. Strict adherence to these dimensions is required, and test coupons are not permitted. The procurement is governed by several technical standards, including SAE AMS4462B, SAE AMS-QQ-A-250/5C, and ASTM B660 and B666. Eligible awardees must be listed on the Qualified Suppliers List for Distributors (QSLD). Key deliverables include a Certificate of Quality Compliance (Mill-Material Certification) provided with every shipment and specific continuous identification markings applied via stamping or stenciling. Packaging must comply with MIL-STD-2073-1E and RP001, specifically requiring robust four-corner protection, full coverage side edge protection, and fiberboard top and bottom coverage. Delivery is required within 36 days after order, with FOB Origin terms and inspection and acceptance occurring at the destination. Invoicing must be processed electronically through the Wide Area WorkFlow system.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Solicitation # SPE8E4-27-Q-0027

Solicitation SPE8E4-27-Q-0027 is a firm fixed price request for quotation issued by the Defense Logistics Agency Troop Support Construction and Equipment Metals office for the procurement of six Aluminum Alloy 5052 metal plates, part number 60205472-00, under NSN 9515-25-160-4477. This procurement is designated as a small business set-aside with a required delivery timeline of 30 days after order. The supplies must be manufactured in accordance with basic drawing N0013 60205472 Revision D and associated quality assurance provisions and reference drawings. Inspection and acceptance will occur at the destination in Point Pleasant, West Virginia. The contract mandates strict adherence to cybersecurity and export control regulations, requiring CMMC Level 2 certification and compliance with ITAR and EAR restrictions. Technical data is limited to contractors with approved US/Canada Joint Certification Program certification and completed DLA export-control training. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with specific palletization requirements outlined in RP001 and IP083. All payment requests and receiving reports must be submitted electronically through the Wide Area WorkFlow system.

Defense Logistics Agency

POSTED

DEADLINE

Aluminum Blanks

Solicitation # SV0120-27

UNICOR, Federal Prison Industries, Inc., is soliciting quotes for a two-year, firm-fixed-price, indefinite delivery-indefinite quantity (IDIQ) contract for the procurement of 3105-H14 aluminum sheets. This requirement, identified as solicitation SV0120-27, is a 100% set-aside for small businesses under NAICS 331315. The contract covers three specific line items of masked, yellow/yellow aluminum sheets in various dimensions: 7x10 inches with 1/2-inch radius corners (50,000 units), 4.5x5 inches with 3/8-inch radius corners (20,000 units), and 2.5x15 inches with square corners (1,000 units). The government guarantees a contract minimum of 40,000 units across any combination of items, with individual delivery orders ranging from a minimum of 4,000 to a maximum of 10,000 units. Deliveries are FOB Destination to UNICOR in Cumberland, Maryland, and must comply with ASTM D-3951-95 packaging standards. Proposals are due by November 13, 2026, at 2:00 PM EST and must include a signed SF1449 with line-item pricing, lead times, and three business management questionnaires for past performance. Award evaluation will be based on technical specifications, price, past performance, and delivery time, with technical specifications and past performance weighted as more important than price. Prospective awardees must be registered in the System for Award Management (SAM) database.

Dba Federal Prison Industries United States Department Of Justice

POSTED

DEADLINE

Laminating Supplies SupplierThis subcontract agreement establishes a supplier for thermal laminating film rolls to support prime contractors working on City of Houston Public Library projects. The scope of work involves the procurement and delivery of four units of 2-pack GBC Thermal Laminating Film Rolls specifically designed for the Ultima 65 EZLoad, featuring Nap I, 1.5 mil thickness, and dimensions of 25 by 500 feet. The supplier is required to provide a minimum one-year guarantee starting from the date of acceptance. This procurement falls under NAICS code 331315 and is managed through the City of Houston.

City of Houston

POSTED

DEADLINE

First Article Test (FAT) SpecialistThis subcontract involves providing First Article Testing services for the Department of Defense, specifically under the DLA Weapons Support Fluid Handling Division. The selected specialist will be responsible for conducting compliance testing on the first production unit of NSN 4720016501591 to ensure it meets all technical specifications. This process requires the use of specialized pressure and material durability testing equipment to verify the integrity of the component. The contractor is tasked with documenting all test results and coordinating the final approval process with the DLA. Key deliverables include a comprehensive First Article Test Report and a formal certification of approval. The work is designated for performance in New Cumberland, Pennsylvania, under NAICS code 331315, with a response deadline of November 9, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Alloy 2219 T31 Aluminum SheetThis subcontract, issued by the DLA Fleet Readiness Center Southeast for the Department of Defense, involves the supply of high-strength Alloy 2219 T31 aluminum sheeting. The required materials must conform to AMS-QQ-A-250/30 Rev A and SAE AMS-QQ-A-250/30A Revision A specifications, with specific dimensions of .071 inches thick, 48 inches wide, and 144 inches long. The order consists of 26 sheets, which must be delivered with DD Form 1423 material certifications and undergo sampling according to MIL-STD-1916 or ASQ H1331 Table 1. The procurement is designated as a Total Small Business Set-Aside under NAICS code 331315, with the place of performance located in Jacksonville, Florida. Interested parties must respond by November 5, 2026.

DLA FLEET READINESS CENTER SOUTHEAST

POSTED

DEADLINE

POLE ASSY, D2 SS

Solicitation # SPE8E5-27-T-0339

Solicitation SPE8E5-27-T-0339 is a request for quotations from the Department of Defense, specifically DLA Troop Support, for the procurement of six units of POLE ASSY, D2 SS (NSN 5411015299306). The requirement specifies a delivery lead time of 167 days after the order, with a need ship date of April 26, 2027, and a final required delivery date of April 30, 2027. Delivery is FOB destination to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to DLA Master List technical and quality requirements, which take precedence over ASTM D3951 packaging standards. All shipments must be marked and labeled according to MIL-STD-129 and palletized per RP001. Environmental and safety compliance is critical, including a prohibition on the intentional addition of mercury and a requirement for Safety Data Sheets (SDS) and labels compliant with 29 C.F.R. 1910.1200 for any hazardous materials. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing and payment. The solicitation incorporates various FAR and DFARS clauses, including those regarding the Buy American Act, safeguarding covered defense information, and prohibitions on covered defense telecommunications equipment. Offers produced using additive manufacturing are ineligible for award. Quotes must be submitted via the DIBBS portal.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

HPG Vaporizer Fan Shroud Smooth Grating

Solicitation # 80NSSC27948324Q

The National Aeronautics and Space Administration, through the NASA Shared Services Center, is soliciting quotes for the procurement of 16 pieces of smooth surface aluminum grating. The materials are specified as Aluminum 6063-T52 or equivalent, with dimensions of 3/16 inch thickness, 1 inch height, 3 feet in width, and 24 feet in length. These components will be used to fabricate protective shrouds for the High Pressure Gas Facility Vaporizer fans at the Stennis Space Center in Mississippi to protect personnel and property from potential mechanical failures. This is a firm-fixed-price contract set aside for small businesses under NAICS code 331315. Award will be made based on the lowest price technically acceptable offer, provided the offeror is registered in the System for Award Management and meets all technical specifications. Delivery is required as FOB Destination to the SSC Weld Shop at Stennis Space Center. Quotes must be submitted to Tracy Bremer by November 4, 2026, and must include the contractor's UEI/Cage code, two points of contact, and the after-receipt-order delivery time. Payment terms are set at NET 30.

NASA Shared Services Center

POSTED

DEADLINE

More opportunities from Department Of Defense → W6QK Acc Wva

Same awarding agency

Metallurgical Testing and Certification ServicesThis subcontract for Metallurgical Testing and Certification Services supports prime contractors on Army Contracting Command projects at the Watervliet Arsenal. The scope of work involves performing comprehensive chemical and mechanical testing on aluminum bronze samples, specifically focusing on yield strength, tensile strength, elongation, and Rockwell Hardness with a minimum requirement of B-95. Chemical analysis must be conducted using spectrometers to verify the precise alloy composition. To ensure quality and compliance, the service provider must maintain ISO/IEC 17025 accreditation and deliver all results via Certified Test Reports in accordance with DD Form 1423. This opportunity is designated as a Total Small Business Set Aside under NAICS code 541380 for the Department of Defense. Responses are due by November 13, 2026.

Testing Laboratories and Services

POSTED

about 6 hours ago

DEADLINE

Fabrication of Casting, Lever (Part #11582540)This small business set-aside subcontract involves the fabrication and supply of 10 lever casting units for prime contractors supporting US Army 105mm M20 Cannon projects. The contractor is required to produce all units in strict accordance with Drawing 11582540 Rev D and must provide a First Article for approval prior to full production. The project mandates full compliance with DoD Item Unique Identification Registry requirements and ISO/IEC 16022 two-dimensional data matrix symbology. Managed under the Department of Defense through agency W6QK Acc Wva, the contract falls under NAICS code 331524 and requires the delivery of 10 finished Casting, Lever units.

Aluminum Foundries (except Die-Casting)

POSTED

DEADLINE

Magnetic Particle Inspection (MPI) for Cannon ComponentsThis subcontract opportunity involves providing non-destructive testing services for prime contractors supporting Army Contracting Command Watervliet Arsenal projects. The primary scope of work is the magnetic particle inspection of P2TC handles to identify surface and near-surface discontinuities, with all testing required to be performed in accordance with ASTM-E1444 standards. The selected provider must deliver detailed inspection reports and certifications of compliance for every handle processed. The project is designated as a total Small Business Set Aside under NAICS code 541380 and is managed by the Department of Defense. To ensure technical quality, the contract requires the use of NDT Level II or III certified technicians. Interested parties must respond by November 16, 2026, for work to be performed in the 12189 zip code area.

Testing Laboratories and Services

POSTED

DEADLINE

Supply of High-Grade Wrought AISI SteelThis subcontract, issued by the Department of Defense for the Army Contracting Command Watervliet Arsenal, involves the supply of high-grade certified wrought steel materials. The contractor is responsible for sourcing steel that conforms to standard AISI grades according to Drawing BL-58357 or MIL-C-13931. To maintain strict quality standards, the materials must not be merchant quality, leaded, resulfurized, or rephosphorized. All deliveries of certified steel stock must be accompanied by Material Test Reports and Certificates of Conformance. The opportunity is designated as a total Small Business Set Aside under NAICS code 423510. Interested parties must respond by November 16, 2026, for performance located in zip code 12189. This contract ensures that prime contractors have access to specialized, high-specification steel necessary for critical military projects.

Metal Service Centers and Other Metal Merchant Wholesalers

POSTED

DEADLINE

Precision Machining of P2TC Handles for 155mm XM282 CannonThis subcontract involves the precision machining and fabrication of five P2TC handles for the 155mm XM282 Cannon, supporting prime contractors on Army Contracting Command Watervliet Arsenal projects. The work requires the use of CNC equipment and AISI grade wrought steels to produce handles according to Drawing BL-58357 Rev A and MIL-C-13931. The project mandates strict adherence to quality and marking standards, including MIL-STD-130, MIL-STD-129, QAP-APPX-WVA, and ASTM-E1444. This opportunity is designated as a total Small Business Set Aside under NAICS code 332710 and is managed by the Department of Defense.

POSTED

DEADLINE

Lever Castings for the Watervliet Arsenal

Solicitation # W911PT27QA026

Solicitation W911PT27QA026 is a total small business set-aside fixed-price contract issued by the Department of Defense for the procurement of 10 lever castings for the 105mm M20 Cannon, conforming to drawing 11582540 Rev D. The award will be made to a single offeror based on the lowest evaluated price, provided they meet all technical material requirements, drawing specifications, and FAR 9.104 responsibility criteria. The contractor is required to provide two castings for first article testing to ensure compliance with quality assurance plans and specifications, with the remaining eight units due by March 29, 2027, following first article approval. The contract requires strict adherence to MIL-STD-130 for unique item identification and marking, and MIL-STD-129 for shipment and storage labeling. Deliveries are FOB Destination to the Watervliet Arsenal in New York, with all shipments requiring appointments through the Carrier Appointment System. Key administrative requirements include the submission of contract data per DD Form 1423 and compliance with safeguarding covered defense information under DFARS 252.204-7012. Proposals must be submitted via the PIEE Solicitation Module, and offerors must certify compliance with the Buy American and Balance of Payments Program.

POSTED

DEADLINE

Handle, P2TC for Watervliet Arsenal

Solicitation # W911PT27QA022

Solicitation W911PT27QA022 is a firm fixed price requirement for the Army Contracting Command Watervliet Arsenal to procure a total of five P2TC handles for the 155mm XM282 Cannon, manufactured according to drawing BL-58357 Revision A. The procurement is categorized under NAICS code 332710 and requires the use of wrought steels conforming to standard AISI grades, specifically prohibiting the use of merchant quality, leaded, resulfurized, or rephosphorized steels. The contract includes strict marking and identification requirements per MIL-STD-130 and MIL-STD-129, utilizing two dimensional data matrix symbology. Deliverables must be submitted with a Certificate of Conformance and adhere to specific quality and heat treatment standards detailed in QAP-APPX-WVA and ASTM-E1444. The award will be made to a single source that submits the lowest evaluated offer meeting all material and responsibility criteria. Delivery is required within 150 calendar days for item 0002, with the destination being the Watervliet Arsenal in New York under FOB Destination terms. All proposals must be submitted electronically via the Procurement Integrated Enterprise Environment Solicitation Module. The contract incorporates various Federal Acquisition Regulation clauses, including the Buy American Act and prohibitions on contracting with inverted domestic corporations. Inspection and acceptance are the responsibility of the Government, and all commercial carriers must schedule delivery appointments through the Carrier Appointment System.

POSTED

DEADLINE

Supply of Raw Materials for Rotary Forge HammersThis subcontract, issued by the Department of Defense under the agency W6QK Acc Wva, involves the supply of raw metal stock and castings for prime contractors working on US Army Watervliet Arsenal projects. The scope of work focuses on sourcing high-strength alloy steel or specialized forgings specifically for G5391 and G5392 Rotary Forge Hammers. All materials must strictly adhere to Technical Data Package specifications, and the provider is required to furnish Mill Test Reports to certify the chemical and physical properties of the materials before delivering the stock to the designated machining facility. The opportunity is designated as a total Small Business Set Aside under NAICS code 331110, with the place of performance located in Watervliet, New York. Interested parties must note the response deadline of November 5, 2026. This contract ensures that critical raw materials meet the rigorous standards necessary for the production of specialized military forge equipment.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

DEADLINE

Industrial Welding for Forge Hammer ComponentsThis subcontract opportunity involves providing specialized industrial welding services for Rotary Forge Hammer components at the US Army Watervliet Arsenal. The selected contractor will perform critical welding between the preparation and finish machining phases to ensure structural integrity for high-impact environments, utilizing TIG, MIG, or Arc welding equipment in strict accordance with TDP specifications and Watervliet Arsenal Instructions. The project is designated as a total Small Business Set Aside under NAICS code 332994 and is managed by the Department of Defense. Qualified bidders must hold AWS certifications to deliver welded assemblies ready for final machining. The response deadline for this requirement is November 5, 2026.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

DEADLINE

Precision Machining for Rotary Forge HammersThis subcontract, titled Precision Machining for Rotary Forge Hammers, involves providing preparation and final finish machining services for prime contractors supporting US Army Watervliet Arsenal projects. The scope of work requires the execution of initial prep machining on raw materials and final finish machining to precise tolerances, strictly adhering to Technical Data Packages and Watervliet Arsenal Instructions. Using high-precision CNC milling and turning equipment, the contractor is responsible for delivering 24 finished machined components specifically for G5391 and G5392 Rotary Forge Hammers. The project is managed by the Department of Defense under agency W6QK Acc Wva and is designated as a total Small Business Set Aside. Performance will take place in Watervliet, New York, under NAICS code 332710. Interested parties should note the response deadline of November 5, 2026.

POSTED

DEADLINE

REFURBISH FORGE HAMMERS: Prep. Machine, Weld, Finish Machine 12ea G5391 & 12ea G5392 Rotary Forge Hammers for U.S. Army Watervliet Arsenal (WVA), NY.

Solicitation # W911PT-27-Q-A024

Solicitation W911PT-27-Q-A024 is a total small business set-aside for the refurbishment of 12 G5391 and 12 G5392 rotary forge hammers in support of production at the U.S. Army Watervliet Arsenal in New York. The scope of work involves preparing, machining, welding with Cormet F115 weld filler, and finish machining to rebuild the hammers' working surfaces, specifically requiring the removal of a half-inch hard facing layer. All work must adhere to drawing specifications G5391, G5392, and G6211. The contract is a firm fixed price arrangement with a period of performance from December 1, 2026, to August 31, 2027, and a delivery timeline of 15 calendar days from the lead time event. The government emphasizes that on-time delivery and product quality are critical, and past performance in these areas will be a major consideration for future awards. Deliverables must be shipped back on original steel pallets to Building 135 at the Watervliet Arsenal and accompanied by a certificate of conformance. Contractors must comply with Service Contract Labor Standards Wage Determination No. 2015-4143 and adhere to strict security protocols, including signing a non-disclosure agreement regarding arsenal technology. Proposals must be submitted electronically via the PIEE Solicitation Module, and all shipping costs must be included in the unit or lot pricing.

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS