This Government Contract opportunity from Government of Canada was posted on April 30, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Aluminum Components Supply for Q-UGV Systems

Closed

International

Submission Closed05/21/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 331311

New

DIBBS

Precision Aluminum Alloy Supplier (2024-T4 Temper, Flat Bar Stock)The contract requires the manufacture or supply of cold-finished aluminum alloy 2024-T4 flat bars compliant with SAE AMS-QQ-A-225/6B specifications, with all material cut to precise lengths and complete traceability throughout production and delivery. The product must meet stringent aerospace-grade standards for composition, mechanical properties, and surface finish, ensuring suitability for high-performance applications. Full material traceability is mandatory, meaning every batch must be documented from raw material source through final inspection with associated certifications and test reports. The solicitation is issued under the DLA Dist San Joaquin, part of the Department of Defense, with a place of performance in Tracy, California, 95304-5000. It is classified as a subcontract under NAICS code 331311, indicating the focus on aluminum rolling, drawing, or extruding. The opportunity was posted on August 5, 2026, with responses due by August 17, 2026. Bidders must ensure compliance with all technical and documentation requirements to meet DoD procurement standards, and the contract will be awarded through the DIBBS system as referenced by the provided UI link.

POSTED

DEADLINE

Aluminum Structural Angle Supply (6061-T6 Alloy)The contract calls for the supply of approximately 901 feet of aluminum structural angle measuring 3.00 inches by 3.00 inches with a 0.250 inch wall thickness, with allowable length variations between 20 and 30 feet and a tolerance of ±10% on total quantity. All material must be manufactured from 6061-T6 aluminum alloy and comply with the technical specifications outlined in SAE AMS-QQ-A-200C and ASTM B666/B666M-20 to ensure structural integrity and consistent performance. The materials are intended for use in defense-related applications, as indicated by the procurement under the Department of Defense through the Depot Oklahoma office, with performance required at Tinker Air Force Base, Oklahoma, ZIP 73145-8000. The solicitation is classified as a subcontract and was posted on August 5, 2026, with responses due by August 17, 2026. The North American Industry Classification System code 331311 identifies the industry as Aluminum Die and Foundry Products Manufacturing, reinforcing the focus on precision metal fabrication. There is no set-aside designation specified, and the contract is open to eligible suppliers who can meet the stringent material standards and delivery timelines. The full solicitation details and submission process are accessible through the DIBBS platform using the reference number SPE8E426T1975.

POSTED

DEADLINE

Raw Material Supply – Aerospace-Grade AluminumThe contract mandates the supply of certified aerospace-grade aluminum stock specifically engineered for defense manufacturing applications, requiring full traceability from origin to delivery and complete mill certification to ensure compliance with strict quality and material integrity standards. All materials must meet recognized aerospace specifications and be accompanied by documented proof of chemical composition, mechanical properties, and production history to support rigorous defense industry requirements. Delivered under a subcontract arrangement with the Defense Logistics Agency, part of the Department of Defense, the performance location and logistical details are not specified, but the procurement is governed by NAICS code 331311, indicating alignment with primary aluminum production and processing. The solicitation was posted in July 2026, and the contract reference number links to a DIBBS award record, signifying formal federal acquisition procedures are in place to ensure accountability, secure sourcing, and adherence to national defense supply chain protocols.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Aluminum Structural Beams (7075/T-6 Alloy)The contract entails the supply and delivery of commercial off-the-shelf aluminum structural beams made from 7075/T-6 alloy, a high-strength material commonly used in demanding aerospace and defense applications. The beams must meet precise dimensional and weight specifications, with full mill certification required to verify material composition and mechanical properties. Compliance with both military standards and ASTM specifications is mandatory to ensure performance, safety, and interoperability in critical defense systems. Delivery must adhere to strict quality assurance protocols, and all materials are subject to verification upon receipt to confirm adherence to the established technical requirements. The contract is classified as a subcontract under the NAICS code 331311, which pertains to aluminum production and processing, and is managed by the Defense Logistics Agency under the Department of Defense. It was posted on July 17, 2026, with performance location and point of contact details not specified in the provided data. The award is issued through the DIBBS system under contract number SPE8E426PQ300, indicating a procurement channel typical for defense supply chain logistics. While no set-aside provisions are listed, the emphasis on certified materials and regulatory compliance underscores the mission-critical nature of the components being procured for government and military use.

Defense Logistics Agency

POSTED

DEADLINE

Aerospace Raw Material SupplyThe contract entails the supply of aerospace-grade aluminum alloys and composite materials specifically designated for the fabrication of aircraft bulkheads, with all materials required to meet stringent military specification or Aerospace Material Specification standards. Full material traceability is mandatory, ensuring every batch can be tracked from origin through processing to final integration, guaranteeing compliance with rigorous aerospace quality and safety protocols. The products must align with the National Industrial Classification System code 331311, indicating production within the primary aluminum manufacturing sector, and are intended for use under the oversight of the Defense Logistics Agency within the Department of Defense. This subcontract is issued under the broader logistical framework of the Department of Defense, with performance and delivery obligations tied to critical aircraft structural components. The materials must adhere to exacting technical and certification benchmarks without exception, as failures in bulkhead integrity could compromise flight safety. Though the solicitation number and point of contact details are not provided, the contract reference ID SPE4A626P6628 and public posting date of July 17, 2026, signal its formal initiation and availability for award under defense procurement procedures. The absence of geographic specifics for performance or delivery suggests the materials may be sourced from multiple qualified suppliers distributed across domestic or allied production networks, contingent upon meeting all regulatory and traceability demands.

Defense Logistics Agency

POSTED

DEADLINE

Aluminum Plate and Sheet SupplyThe contract involves the supply of commercial-grade aluminum plate and sheet in a range of thicknesses, alloys, and tempers to fulfill demand from the Defense Logistics Agency Troop Support for use in industrial and defense applications. The materials must meet rigorous specifications to ensure suitability for critical defense systems and infrastructure, with performance requirements defined by military and industry standards. The procurement is structured as a subcontract, underscoring its integration into a broader supply chain supporting Department of Defense operations. Performance of this contract is centered in Philadelphia, with all deliveries and compliance activities expected to be executed from this location. The North American Industry Classification System code 331311 confirms the focus on aluminum rolling, drawing, and extruding, indicating the supplier must possess specialized manufacturing capabilities. Although no solicitation number or point of contact is provided, the posting date of June 23, 2026, signals an upcoming opportunity for qualified vendors to respond, and interested parties should reference the SAM.gov workspace link for detailed submission guidelines and technical requirements.

DLA Troop Support

POSTED

about 2 months ago

DEADLINE

N/A

AI Contract Overview

The contract pertains to the supply of aluminum components or raw materials specifically designated for use in the construction of Q-UGV systems, with strict adherence to Canadian sourcing requirements and technical specifications. All materials must meet defined quality and compliance standards to ensure suitability for military-grade unmanned ground vehicle applications, with performance obligations centered in Quebec, excluding the National Capital Region. This subcontract is issued under the authority of the Department of National Defence, Government of Canada, and falls under NAICS code 331311, indicating classification within aluminum profile manufacturing and related processing. The solicitation was posted on April 30, 2026, with responses required by May 21, 2026, providing suppliers with a limited window to submit proposals that demonstrate compliance with both logistical and technical demands. No set-aside provisions are indicated, meaning the opportunity is open to all eligible suppliers meeting the specified criteria.