Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Aerospace Specialty Metals Supply

Open

Response Deadline11/27/2026, 04:30:00 PM EST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract through the Department of the Navy's DLA Aviation office in Philadelphia involves the procurement of raw aerospace-grade specialty metals for fuel tank projects. The selected provider will be responsible for sourcing and delivering certified aluminum, titanium, or steel alloys. All deliveries must be accompanied by Material Test Reports and Certificates of Conformance to ensure quality and technical compliance. Strict adherence to DFARS 252.225-7009 and Buy American requirements is mandatory for this engagement. The contract falls under NAICS code 331311, with performance taking place in Philadelphia. Interested parties must submit their responses by the deadline of November 27, 2026.

General Info

Navy subcontract for aerospace metals in Philadelphia; responses due by November 27, 2026.

Agency

Department Of The Navy → Pa DLA Aviation At Philadelphia

NAICS

331311 - Alumina Refining

Place of Performance

PHILADELPHIA, PA, 19111-5098, USA

Set-Aside

NONE

Documents

This scope was carved out of SPRPA127QWA19.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

TANK,FUEL,AIRCRAFT — 1560014552535 — SPRPA127QWA19

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 28

subcontract

Response DeadlineNov 27

Submission deadline

Response Deadline

11/27/2026, 04:30:00 PM ESTin 19 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of The Navy → Pa DLA Aviation At Philadelphia

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of The Navy → Pa DLA Aviation At Philadelphia

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies raw aerospace-grade specialty metals for prime contractors on DLA Aviation fuel tank projects. Sources and delivers certified aluminum, titanium, or steel alloys with accompanying Material Test Reports (MTRs) and Certificates of Conformance. Must comply with DFARS 252.225-7009 and Buy American requirements. Delivers certified raw metal materials.

Similar Contracts

Same NAICS industry code

Aerospace Grade Sheet/Plate Material SupplyThis subcontract involves the supply of raw aerospace-grade sheet and plate metal for prime contractors supporting DLA Weapons Support ASC projects. The supplier is responsible for sourcing and delivering materials that strictly adhere to TDP Rev A Gen 1 and drawings 98897/98752 specifications. To ensure full traceability and quality assurance, the provider must furnish all necessary material certifications and Mill Test Reports. The contract is managed under the Department of Defense and requires strict compliance with the Buy American Act and Berry Amendment regarding domestic material restrictions. Performance for this requirement is centered at Robins Air Force Base, with the primary objective of delivering certified raw material stock under NAICS code 331311.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Aerospace Grade Material SupplyThis subcontract, managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, involves the supply of certified aerospace-grade raw material for aircraft stiffener rib production. The materials must strictly adhere to TDP Rev C Gen 8 specifications and include full traceability and Mill Test Reports. To ensure regulatory compliance, all supplies must meet the domestic sourcing requirements of the Buy American Act and the Berry Amendment. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 331311, with the place of performance located at Tinker AFB. Interested parties must respond by November 9, 2026, to provide the necessary materials for prime contractors working on DLA Weapons Support ASC projects.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

in about 15 hours

Raw Material Supply – Aerospace-Grade AluminumThe contract mandates the supply of certified aerospace-grade aluminum stock specifically engineered for defense manufacturing applications, requiring full traceability from origin to delivery and complete mill certification to ensure compliance with strict quality and material integrity standards. All materials must meet recognized aerospace specifications and be accompanied by documented proof of chemical composition, mechanical properties, and production history to support rigorous defense industry requirements. Delivered under a subcontract arrangement with the Defense Logistics Agency, part of the Department of Defense, the performance location and logistical details are not specified, but the procurement is governed by NAICS code 331311, indicating alignment with primary aluminum production and processing. The solicitation was posted in July 2026, and the contract reference number links to a DIBBS award record, signifying formal federal acquisition procedures are in place to ensure accountability, secure sourcing, and adherence to national defense supply chain protocols.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Aluminum Structural Beams (7075/T-6 Alloy)The contract entails the supply and delivery of commercial off-the-shelf aluminum structural beams made from 7075/T-6 alloy, a high-strength material commonly used in demanding aerospace and defense applications. The beams must meet precise dimensional and weight specifications, with full mill certification required to verify material composition and mechanical properties. Compliance with both military standards and ASTM specifications is mandatory to ensure performance, safety, and interoperability in critical defense systems. Delivery must adhere to strict quality assurance protocols, and all materials are subject to verification upon receipt to confirm adherence to the established technical requirements. The contract is classified as a subcontract under the NAICS code 331311, which pertains to aluminum production and processing, and is managed by the Defense Logistics Agency under the Department of Defense. It was posted on July 17, 2026, with performance location and point of contact details not specified in the provided data. The award is issued through the DIBBS system under contract number SPE8E426PQ300, indicating a procurement channel typical for defense supply chain logistics. While no set-aside provisions are listed, the emphasis on certified materials and regulatory compliance underscores the mission-critical nature of the components being procured for government and military use.

Defense Logistics Agency

POSTED

DEADLINE

Aerospace Raw Material SupplyThe contract entails the supply of aerospace-grade aluminum alloys and composite materials specifically designated for the fabrication of aircraft bulkheads, with all materials required to meet stringent military specification or Aerospace Material Specification standards. Full material traceability is mandatory, ensuring every batch can be tracked from origin through processing to final integration, guaranteeing compliance with rigorous aerospace quality and safety protocols. The products must align with the National Industrial Classification System code 331311, indicating production within the primary aluminum manufacturing sector, and are intended for use under the oversight of the Defense Logistics Agency within the Department of Defense. This subcontract is issued under the broader logistical framework of the Department of Defense, with performance and delivery obligations tied to critical aircraft structural components. The materials must adhere to exacting technical and certification benchmarks without exception, as failures in bulkhead integrity could compromise flight safety. Though the solicitation number and point of contact details are not provided, the contract reference ID SPE4A626P6628 and public posting date of July 17, 2026, signal its formal initiation and availability for award under defense procurement procedures. The absence of geographic specifics for performance or delivery suggests the materials may be sourced from multiple qualified suppliers distributed across domestic or allied production networks, contingent upon meeting all regulatory and traceability demands.

Defense Logistics Agency

POSTED

DEADLINE

Aluminum Plate and Sheet SupplyThe contract involves the supply of commercial-grade aluminum plate and sheet in a range of thicknesses, alloys, and tempers to fulfill demand from the Defense Logistics Agency Troop Support for use in industrial and defense applications. The materials must meet rigorous specifications to ensure suitability for critical defense systems and infrastructure, with performance requirements defined by military and industry standards. The procurement is structured as a subcontract, underscoring its integration into a broader supply chain supporting Department of Defense operations. Performance of this contract is centered in Philadelphia, with all deliveries and compliance activities expected to be executed from this location. The North American Industry Classification System code 331311 confirms the focus on aluminum rolling, drawing, and extruding, indicating the supplier must possess specialized manufacturing capabilities. Although no solicitation number or point of contact is provided, the posting date of June 23, 2026, signals an upcoming opportunity for qualified vendors to respond, and interested parties should reference the SAM.gov workspace link for detailed submission guidelines and technical requirements.

DLA Troop Support

POSTED

DEADLINE

Marine-Grade Steel and Aluminium SupplyThis subcontract involves the supply of raw marine-grade aluminium and structural steel to prime contractors supporting Ministry of Defence Fleet Solid Support projects in the United Kingdom. The scope of work focuses on the sourcing and delivery of certified alloys and high-strength steel directly to fabrication facilities, with a strict requirement for full material mill certificates to maintain grade compliance and traceability. To qualify for this engagement, providers must hold ISO 9001 certification. The contract is categorized under NAICS code 331311 and remains open for responses until November 30, 2026.

Ministry of Defence

POSTED

almost 57 years ago

DEADLINE

More opportunities from Department Of The Navy → Pa DLA Aviation At Philadelphia

Same awarding agency

MIL-STD Packaging and Marking ServicesThis subcontract for MIL-STD Packaging and Marking Services supports prime contractors on NAVSUP WSS projects for the Department of the Navy, specifically through the DLA Aviation office in Philadelphia. The scope of work involves providing specialized military-grade packaging and marking for both CONUS and OCONUS shipments. The contractor is responsible for executing Level A and Level B packaging and utilizing exterior shipping containers in strict accordance with MIL-STD-2073-1. Additionally, the contractor must ensure all shipments are labeled according to MIL-STD-129, including the application of PIID, CLIN, and SubCLIN identifiers. The final deliverable consists of fully packed and marked shipping containers ready for transport. This opportunity is categorized under NAICS code 493110, with performance taking place in Philadelphia, Pennsylvania.

General Warehousing and Storage

POSTED

DEADLINE

Surgical Valve Assembly SupplierThis subcontract involves the supply of three specialized surgical valve assemblies for prime contractors supporting NAVSUP WSS projects. Managed by the Department of the Navy through the DLA Aviation office in Philadelphia, the contract requires the manufacturer or source to meet strict Critical Safety Item standards and comply with DFARS 252.209-7010. The supplier must adhere to Buy American and Free Trade Agreements as specified in DFARS 252.225-7036. The project falls under NAICS code 339113, with the place of performance located in Philadelphia. Interested parties must respond by the deadline of December 7, 2026.

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

DATA DISPLAY GROUP — 6610014956002 — SPRPA127QXA67

Solicitation # SPRPA127QXA67

Solicitation SPRPA127QXA67 is a fixed-price request for quotation issued by the Department of the Navy via DLA Aviation at Philadelphia for the procurement of 10 Data Display Groups (NSN 6610-01-495-6002). Designated as a Critical Application Item, the hardware must be delivered within 382 days to DLA Distribution San Joaquin in Tracy, California. The government intends to make a single award based on the most advantageous offer, with past performance weighted as more important than price, followed by the proposed delivery timeframe. The contractor is required to maintain a rigorous quality control system compliant with ISO 9000, 9001, 9002, Mil-I-45208A, or Mil-Q-9858. Key requirements include the development of a Repair Quality Plan, the maintenance of detailed historical record files for each serial number, and the submission of all failure analysis and corrective action reports to the government. While the contractor is granted Internal Review Board authority for minor non-conformances, the government retains formal Material Review Board authority for as-is dispositions. Inspection and acceptance will occur at the origin, and the contractor must maintain receiving inspection reports for at least 12 months following acceptance. Compliance with strict military standards is mandatory, including MIL-STD-130 for markings, MIL-STD-2073-1 for packaging, and MIL-STD-129 for container labeling. The contract incorporates critical federal and defense regulations, including FAR 52.223-3 for hazardous material identification and DFARS 252.204-7012 for cybersecurity and safeguarding covered defense information. Invoicing and payment must be processed electronically through the Wide Area Workflow system.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

DRAG BEAM — 1620011794141 — SPRPA127QRA36

Solicitation # SPRPA127QRA36

Solicitation SPRPA1-27-Q-RA36, issued on November 6, 2026, by DLA Aviation at Philadelphia for the Department of the Navy, seeks the procurement of two newly manufactured Drag Beams (NSN 1620-01-179-4141). This requirement is issued under Emergency Acquisition Flexibilities for an FMS case and is not a small business set-aside. The contract specifies a delivery timeline of 365 days, with inspection and acceptance occurring at the origin. Award will be made to a single responsible offeror based on a determination of the most advantageous offer, with past performance weighted as more important than price. The government may utilize the DoD Supplier Performance Risk System to assess supplier, item, and price risks. Technical requirements for the drag beams include specific finishing processes: two coats of gloss white polyurethane (MIL-PRF-85285, Type I, color 17925) and one coat of Fluid Film NAS (per SS8536) on the interior main bore, and one coat of exterior paint (MIL-PRF-85285, color code 36118) with masking per SAC Drawing 70250-32105. Notably, the SS9523 foam specified in drawing 70250-12062 must be omitted. Contractors must adhere to ISO 9000 or equivalent quality standards and follow MIL-STD-2073 and MIL-STD-129 for packaging and marking. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

ANTENNA — 5985015303257 — SPRPA127QWA31

Solicitation # SPRPA127QWA31

Solicitation SPRPA127QWA31, issued by DLA Aviation at Philadelphia for the Department of the Navy on November 6, 2026, seeks quotations for the procurement of two antenna units, NSN 5985-01-530-3257. This requirement is issued under Emergency Acquisition Flexibilities and requires offerors to be government-approved sources of supply. Quotations are due by November 23, 2026, and the intended award will be a single contract granted to the responsible offeror determined to be most advantageous. Past performance is the primary evaluation factor and is weighted more heavily than price. The contract stipulates a delivery timeline of 90 days with FOB Destination terms. Strict adherence to military standards is required, including MIL-STD-2073 for packaging, MIL-STD-129 for marking, and MIL-STD-130 for identification of U.S. Military Property. Additionally, electronic parts must comply with ANSI/ESD S20.20-2021 for ESD control. Inspection and acceptance will occur at the origin. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. Offerors must be registered in the System for Award Management and provide any necessary authorized distributor letters. The solicitation incorporates various FAR and DFARS clauses regarding cybersecurity, Buy American preferences, and hazardous material identification. Evaluation of risk will be conducted using the Supplier Performance Risk System to assess item, price, and supplier risks.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

DEADLINE

CONTROL,RADIO SET T — 5895016571362 — SPRPA127QXA87

Solicitation # SPRPA127QXA87

Solicitation SPRPA127QXA87, issued by DLA Aviation at Philadelphia for the Department of the Navy, is a request for quotations for 10 units of Radio Set Control (NSN 5895-01-657-1362). This procurement is designated as a Critical Application Item and is issued under Emergency Acquisition Flexibilities. Quotations are due by November 23, 2026, with a required delivery timeline of 90 days FOB Destination. The government intends to make a single award based on the most advantageous offer, prioritizing past performance as the primary evaluation factor over price. Performance risk will be further assessed using the DoD Supplier Performance Risk System to evaluate item, price, and supplier risk. The contractor must adhere to strict quality and security standards, including ISO 9001, SAE AS9100, and NIST SP 800-171 for safeguarding covered defense information. Packaging must comply with MIL-STD-2073-1, with specific levels based on shipment destination, and all containers must be marked according to MIL-STD-129. Inspection and acceptance will occur at the origin. Payment requests and receiving reports must be submitted electronically via the Wide Area Workflow system. This solicitation is not a small business set-aside, and offerors must maintain active registration in the System for Award Management.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

DEADLINE

CYLINDER ASSEMBLY,R — 1680008736277 — SPRPA127QVA23

Solicitation # SPRPA127QVA23

Solicitation SPRPA1-27-Q-VA23 is a Request for Quotation issued by DLA Aviation at Philadelphia for the procurement of 24 units of Cylinder Assembly, R, identified by NIIN 008736277 and TDP Version 001. The government intends to make a single award based on the most advantageous offer, prioritizing past performance over price. Evaluation of past performance may include the use of the DoD Supplier Performance Risk System color ratings. Quotations are due by December 7, 2026, and must be submitted to the DLA Aviation office in Philadelphia. The contract requires strict adherence to military standards, including MIL-STD-130 for markings and MIL-STD-2073 for packaging. Specific shipping requirements include FOB Destination terms and the use of ASTM D3951-18 for CONUS shipments or MIL-STD-2073-1 for OCONUS shipments. Contractors must maintain the total equipment baseline configuration and submit any Engineering Change Proposals in accordance with DI-SESS-80639E. Quality management compliance with ISO 9001 or SAE AS9100 is required, and inspection and acceptance will occur at the origin. Invoicing and payment must be processed electronically through the Wide Area Workflow system.

Fluid Power Cylinder and Actuator Manufacturing

POSTED

DEADLINE

SRL POWER SUPPLY — 1680016185503 — SPRPA127QWA30

Solicitation # SPRPA127QWA30

Solicitation SPRPA1-27-Q-WA30, issued by DLA Aviation at Philadelphia for the Department of the Navy, seeks quotations for the overhaul, upgrade, repair, testing, and inspection of seven SRL Power Supplies (P/N 2000792-1, NSN 1680-01-618-5503). The objective is to return these units to a Ready For Issue condition in accordance with L3 Harris Technologies Inc drawing 82340 / 2000792-1. The contractor is responsible for providing all necessary facilities, labor, materials, and tooling, as the government will not provide manufacturing aids or special test equipment. All work must be performed at the identified facility in Amityville, New York, and must comply with quality standards ISO 9001/SAE AS9100 and calibration requirements ANSI/NCSL Z540.3 or ISO-10012-1. The contract specifies a delivery timeline of 90 days with FOB Destination terms, shipping to facilities in New Cumberland, Pennsylvania, and Tracy, California. Packaging must adhere to MIL-STD-2073-1 and MIL-STD-129 for markings. Award will be based on the most advantageous proposal, with past performance weighted more heavily than price. Key administrative requirements include the use of the Wide Area Workflow system for invoicing and strict adherence to FAR 52.211-5 regarding new material requirements. Special provisions are included for Beyond Economical Repair and Missing on Induction determinations, both of which require written concurrence from DCMA.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

BRAKE,ELECTRIC — 6110011820526 — SPRPA127QYA53

Solicitation # SPRPA127QYA53

Solicitation SPRPA1-27-Q-YA53 is a fixed-price procurement issued by the Department of the Navy, Pa DLA Aviation At Philadelphia, for the acquisition of 13 electric brakes (NSN 6110-01-182-0526). The requirement is divided into three delivery lines with required delivery dates of 316, 324, and 424 days. These items are identified as non-critical and will be delivered FOB Origin, with both inspection and acceptance occurring at the source. The procurement is conducted under Emergency Acquisition Flexibilities and requires strict adherence to MIL-STD-2073-1 for preservation and packaging, MIL-STD-129 for marking, and MIL-STD-130 for Unique Item Identification. The government intends to make a single award based on the most advantageous offer, prioritizing past performance over price. Technical acceptability is contingent upon the submission of an authentic, verifiable distributor authorization letter on OEM letterhead and explicit agreement to the warranty terms under FAR 52.246-17. Additionally, the Supplier Performance Risk System will be used to assess item, price, and supplier risks. Contractors must utilize the Wide Area WorkFlow system for invoicing and comply with NIST SP 800-171 and DFARS 252.204-7012 cybersecurity standards for safeguarding covered defense information.

Motor Vehicle Brake System Manufacturing

POSTED

DEADLINE

VALVE ASSEMBLY,SURG — 1680015446629 — SPRPA127QWA29

Solicitation # SPRPA127QWA29

This solicitation, issued by DLA Aviation at Philadelphia for the Department of the Navy, seeks the procurement of three Valve Assembly, Surg units. The contract is a Request for Quotations with a delivery period of 90 days, utilizing FOB Destination shipping terms. Award decisions will be based on a combination of price and past performance, with past performance weighted as the more important factor. The government utilizes the DoD Supplier Performance Risk System (SPRS) to evaluate supplier risk, item risk, and price risk to determine the most advantageous offeror. The contractor must adhere to strict quality control and technical data package requirements, maintaining a system compliant with ISO 9000/9001/9002 or equivalent standards. Key responsibilities include implementing a Repair Quality Plan, managing nonconforming materials, and maintaining detailed historical record files for each item. While the contractor is granted Internal Review Board authority for minor non-conformances, the government retains formal Material Review Board authority for as-is dispositions. Packaging must meet MIL-STD-2073-1 and ASTM D3951-18 standards, and all containers must be marked according to MIL-STD-129, including specific PIID and CLIN identifiers. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and payment. The contract incorporates various FAR and DFARS clauses covering cybersecurity (NIST SP 800-171), the Buy American Act, and prohibitions on certain foreign military companies and telecommunications equipment. Inspection and acceptance are conducted at the origin, and the contractor is required to maintain all inspection reports for at least twelve months following the acceptance of the end items.

Industrial Valve Manufacturing

POSTED

DEADLINE

Military Grade Packaging and Palletization ServicesThis subcontract involves providing specialized military grade packaging, marking, and palletization services for prime contractors supporting DLA Aviation projects through the Department of the Navy. The scope of work requires the preservation and packaging of aviation components, specifically three Radome units, ensuring all processes adhere to MIL-STD-2073-1. Additionally, the contractor must apply UID labeling in accordance with MIL-STD-129 and MIL-STD-130, and perform unit load palletization using MIL-SPEC moisture barriers and cushioning per MIL-STD-147 for FOB Destination delivery. The project is managed by the Pa DLA Aviation office in Philadelphia, with the place of performance located in Philadelphia, Pennsylvania. Interested parties must note the response deadline of November 16, 2026. The services fall under NAICS code 488510, focusing on the rigorous technical standards required for the transport and preservation of critical military aviation hardware.

Freight Transportation Arrangement

POSTED

DEADLINE

Manufacturing and Supply of Radome B387 (NSN 5985-01-609-8999)This subcontract involves the manufacture and supply of three Radome B387 units (NSN 5985-01-609-8999) for prime contractors supporting DLA Aviation projects under the Department of the Navy. The scope of work requires the fabrication of radome structures using RF-transparent materials, composite molding, and specialized RF testing equipment. Performance will take place in Philadelphia, Pennsylvania, under NAICS code 336413. The contractor must adhere to strict quality and regulatory standards, including precision cleaning per MIL-STD-1330 and maintenance of ISO 9001 and NCSL Z540.3 or ISO 10012 calibration standards. Additionally, the provider must comply with the Buy American Program. The solicitation was posted on November 4, 2026, with a response deadline of November 16, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS