Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Surgical Valve Assembly Supplier

Open

Response Deadline12/07/2026, 04:30:00 PM EST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of three specialized surgical valve assemblies for prime contractors supporting NAVSUP WSS projects. Managed by the Department of the Navy through the DLA Aviation office in Philadelphia, the contract requires the manufacturer or source to meet strict Critical Safety Item standards and comply with DFARS 252.209-7010. The supplier must adhere to Buy American and Free Trade Agreements as specified in DFARS 252.225-7036. The project falls under NAICS code 339113, with the place of performance located in Philadelphia. Interested parties must respond by the deadline of December 7, 2026.

General Info

Supply three surgical valve assemblies for Navy NAVSUP WSS projects by December 2026.

Agency

Department Of The Navy → Pa DLA Aviation At Philadelphia

NAICS

339113 - Surgical Appliance and Supplies Manufacturing

Place of Performance

PHILADELPHIA, PA, 19111-5098, USA

Set-Aside

NONE

Documents

This scope was carved out of SPRPA127QWA29.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

VALVE ASSEMBLY,SURG — 1680015446629 — SPRPA127QWA29

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 6

subcontract

Response DeadlineDec 7

Submission deadline

Response Deadline

12/07/2026, 04:30:00 PM ESTin 29 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of The Navy → Pa DLA Aviation At Philadelphia

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of The Navy → Pa DLA Aviation At Philadelphia

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies specialized surgical valve assemblies for prime contractors on NAVSUP WSS projects. Manufactures or sources VALVE ASSEMBLY, SURG meeting Critical Safety Item (CSI) standards and DFARS 252.209-7010. Adheres to Buy American and Free Trade Agreements per DFARS 252.225-7036. Delivers 3 units of Valve Assembly, SURG.

Similar Contracts

Same NAICS industry code

Supply of Non-Linear Triple-Flange Ear PlugsThis subcontract involves the manufacture and supply of 4,000 boxes of medium-sized, non-linear, triple-flange ear plugs for prime contractors under Department of Defense DLA supply contracts. The products must be olive green and adhere to NSN 6515-01-632-4179 specifications, featuring a detachable cloth cord and packaging in clear pillow cases with black beaded chains. Performance requirements specify a noise reduction rating of 24 dB when the cap is closed and 9 dB when the cap is open. Managed by the Medical Supply Chain MD Surg FSF, the contract falls under NAICS code 339113 with the place of performance located in West Los Angeles, California. The solicitation was posted on November 8, 2026, with a response deadline of November 16, 2026.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 9 hours ago

DEADLINE

Supply of Night Vision Utility Lights (NSN 6220-01-491-1898)This subcontract, set aside for Women-Owned Small Businesses, involves the manufacture and supply of 45 Night Vision Utility Lights (NSN 6220-01-491-1898) for the DLA Weapons Support ASC Commodities Division. The contractor is responsible for ensuring all units meet strict Department of Defense specifications for night vision compatibility and must adhere to the Buy American Act and Berry Amendment. Deliveries are designated for DLA Warner Robins and DLA Depot Oklahoma. Operational requirements include rigorous quality assurance performed according to MIL-STD-1916 or ASQ H1331, with packaging following MIL-STD-129 and MIL-STD-2073-1E standards. Additionally, the contractor must complete a CMMC Level 2 self-assessment to ensure cybersecurity compliance. The project falls under NAICS code 339113 and is managed through the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Supplier of Non-Linear Triple-Flange EarplugsThis subcontract involves the supply of 200 pairs of non-linear triple-flange earplugs for prime contractors supporting Department of Defense medical supply chain projects. The required items are small yellow earplugs featuring a noise reduction rating of 24 dB when the cap is closed and 12 dB when open, complete with detachable cloth cords. Each pair must be packaged in clear pillow cases with black beaded chains in accordance with ASTM D3951 and Medical Marking Standard No. 1. The contract mandates strict adherence to the Berry Amendment and MIL-STD-129 marking requirements. Delivery is specified as FOB Destination, with the place of performance located in West Los Angeles. This opportunity is managed under NAICS code 339113 for the Medical Supply Chain MD Surg FSF agency.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 9 hours ago

DEADLINE

Supply of Endoscopic Instrument Sterilization TraysThis subcontract through the Department of Defense Medical Supply Chain FSH involves the manufacture and supply of 12 medical-grade plastic sterilization trays and integrated liners. Designed for the disinfection and cold sterilization of surgical endoscopic instruments, the trays must measure 29 x 8.5 x 5 inches and strictly adhere to NSN 6530-01-570-0727. The provider must ensure full compliance with the Berry Amendment and the Buy American Act. Performance for this contract will take place in Williamsburg, Virginia, under NAICS code 339113. Responses are due by November 16, 2026.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 9 hours ago

DEADLINE

Supply of Red Rubber Veterinary Feeding TubesThis subcontract involves the manufacture and supply of sterile red rubber veterinary feeding tubes for prime contractors working on Department of Defense projects under the DLA Troop Support Medical Supply Chain. The required catheters must be constructed from polyvinyl chloride with smooth rounded tips to minimize tissue trauma and must adhere to NSN 6515016725528 specifications, specifically featuring a 10FR diameter and a 16-inch length. To ensure product viability, all units must be sterile and packaged to maintain a shelf life of 36 months. The contract falls under NAICS code 339113 and is managed by the Medical Supply Chain MD Surg FSF, with the place of performance located at APO 09227-0000.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 9 hours ago

DEADLINE

Medical Disposable Textiles SupplierThis subcontract opportunity is for a Medical Disposable Textiles Supplier to provide disposable absorbent and barrier textiles for prime contractors supporting Department of Defense medical supply chain projects. The scope of work involves the manufacture and delivery of bulk quantities of poly-backed towels, fenestrated drapes, and cotton-filled sponges produced from medical-grade cotton, non-woven fabrics, and poly-backed absorbent materials. The contract is managed by the Medical Supply Chain MD Surg FSF and requires strict compliance with the Berry Amendment to ensure all materials are domestically sourced. Performance for this contract will take place in San Antonio, Texas. Interested parties must respond by November 16, 2026, under NAICS code 339113.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 9 hours ago

DEADLINE

Surgical Instrument Component SupplierThis subcontract opportunity is for a supplier to provide medical-grade stainless steel surgical instruments to prime contractors supporting Department of Defense medical supply chain projects. The scope of work includes the manufacture and delivery of bulk quantities of Adson tissue forceps with teeth, Baumgartner needle holders, and both sharp and blunt tissue scissors, which may be delivered in sterilized or non-sterilized formats. The selected supplier must adhere to strict medical device manufacturing standards and comply with Berry Amendment domestic sourcing requirements. Performance for this contract will take place in San Antonio, Texas, under NAICS code 339113. Interested parties must submit their responses by November 16, 2026.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 9 hours ago

DEADLINE

Supply of Arterial Embolectomy CathetersThis subcontract involves the supply of 30 specialized arterial embolectomy catheters to support DLA Troop Support Medical Supply Chain contracts. The required items must be Green, 15.748 inches nominal, 0.018 French, and meet Fogarty 3FR 80CM LG PLAS specifications. All products must adhere to FDA Regulation 870.5150 Class II, 510(k) requirements, and GMP standards, with marking compliant with Medical Marking Standard No. 1 and MIL-STD-129. Managed by the Department of Defense under NAICS code 339113, the contract specifies delivery of the units FOB Destination. The place of performance is located in Williamsburg, Virginia. Interested parties must respond by November 16, 2026.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 9 hours ago

DEADLINE

Supply of Disposable Chemical Heating Pads (NSN 6530-01-653-4261)This subcontract involves the supply of disposable chemical heating pads for prime contractors supporting Defense Logistics Agency medical supply contracts. The required goods must meet NSN 6530-01-653-4261 specifications, featuring dimensions of 9 by 7 inches and delivered in packages of 16 units. The total order quantity consists of 10 packages, with performance taking place in Columbia, South Carolina. The contract is managed under the Department of Defense Medical Supply Chain and falls under NAICS code 339113. Awardees must ensure full compliance with the Buy American and Balance of Payments Program, as well as adhere to all restrictions regarding covered defense telecommunications equipment. The response deadline for this opportunity is November 16, 2026.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 9 hours ago

DEADLINE

Interproximal Carver (IPC) SupplyThis subcontract involves the manufacture and supply of specialized Interproximal Carvers for prime contractors supporting the Department of Defense Medical Supply Chain. The tools must be produced using medical-grade stainless steel in strict accordance with medical specifications and IPC design standards for dental operative kits. The scope of work requires the delivery of finished, unsterilized carving tools to a designated performance location in FPO. The opportunity is categorized under NAICS code 339113 and was posted on November 8, 2026, with a response deadline of November 16, 2026. This procurement is managed through the Defense Logistics Agency to ensure the availability of critical dental instruments for military medical operations.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 9 hours ago

DEADLINE

Dental Operative Instrument SupplyThis subcontract for Dental Operative Instrument Supply involves the manufacture and delivery of specialized dental hand tools for prime contractors supporting the Department of Defense Medical Supply Chain. The scope of work specifically requires the production of Rigid Spatula No. 324 and Woodson No. 2 Plunger instruments. These tools must be fabricated from medical-grade stainless steel or compatible alloys and must strictly adhere to DLA and medical standards for the designated tool numbers. The contract specifies that the finished dental instruments are to be delivered in an unsterilized state. Performance will take place at FPO 34088-3000 under NAICS code 339113. Interested parties must note the response deadline of November 16, 2026, to be considered for this supply requirement.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 9 hours ago

DEADLINE

Silver Nitrate Applicator SupplyThis subcontract involves the supply of prescription-grade silver nitrate applicators for prime contractors supporting DLA Troop Support medical supply contracts. The required product consists of six-inch applicators featuring a fused mixture of 75 percent silver nitrate and 25 percent potassium nitrate, delivered in containers of 100 units each. The Department of Defense, specifically the Medical Supply Chain Pharm FSA, oversees this requirement under NAICS code 339113. Compliance is mandatory regarding FAR 52.223-3 for hazardous materials and MIL-STD-129 for shipping and marking standards. The contract requires the provider to possess RX ONLY prescription-grade medical device capabilities. Interested parties must respond by November 16, 2026, for performance located at FPO 96695.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 9 hours ago

DEADLINE

More opportunities from Department Of The Navy → Pa DLA Aviation At Philadelphia

Same awarding agency

MIL-STD Packaging and Marking ServicesThis subcontract for MIL-STD Packaging and Marking Services supports prime contractors on NAVSUP WSS projects for the Department of the Navy, specifically through the DLA Aviation office in Philadelphia. The scope of work involves providing specialized military-grade packaging and marking for both CONUS and OCONUS shipments. The contractor is responsible for executing Level A and Level B packaging and utilizing exterior shipping containers in strict accordance with MIL-STD-2073-1. Additionally, the contractor must ensure all shipments are labeled according to MIL-STD-129, including the application of PIID, CLIN, and SubCLIN identifiers. The final deliverable consists of fully packed and marked shipping containers ready for transport. This opportunity is categorized under NAICS code 493110, with performance taking place in Philadelphia, Pennsylvania.

General Warehousing and Storage

POSTED

DEADLINE

DATA DISPLAY GROUP — 6610014956002 — SPRPA127QXA67

Solicitation # SPRPA127QXA67

Solicitation SPRPA127QXA67 is a fixed-price request for quotation issued by the Department of the Navy via DLA Aviation at Philadelphia for the procurement of 10 Data Display Groups (NSN 6610-01-495-6002). Designated as a Critical Application Item, the hardware must be delivered within 382 days to DLA Distribution San Joaquin in Tracy, California. The government intends to make a single award based on the most advantageous offer, with past performance weighted as more important than price, followed by the proposed delivery timeframe. The contractor is required to maintain a rigorous quality control system compliant with ISO 9000, 9001, 9002, Mil-I-45208A, or Mil-Q-9858. Key requirements include the development of a Repair Quality Plan, the maintenance of detailed historical record files for each serial number, and the submission of all failure analysis and corrective action reports to the government. While the contractor is granted Internal Review Board authority for minor non-conformances, the government retains formal Material Review Board authority for as-is dispositions. Inspection and acceptance will occur at the origin, and the contractor must maintain receiving inspection reports for at least 12 months following acceptance. Compliance with strict military standards is mandatory, including MIL-STD-130 for markings, MIL-STD-2073-1 for packaging, and MIL-STD-129 for container labeling. The contract incorporates critical federal and defense regulations, including FAR 52.223-3 for hazardous material identification and DFARS 252.204-7012 for cybersecurity and safeguarding covered defense information. Invoicing and payment must be processed electronically through the Wide Area Workflow system.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

DRAG BEAM — 1620011794141 — SPRPA127QRA36

Solicitation # SPRPA127QRA36

Solicitation SPRPA1-27-Q-RA36, issued on November 6, 2026, by DLA Aviation at Philadelphia for the Department of the Navy, seeks the procurement of two newly manufactured Drag Beams (NSN 1620-01-179-4141). This requirement is issued under Emergency Acquisition Flexibilities for an FMS case and is not a small business set-aside. The contract specifies a delivery timeline of 365 days, with inspection and acceptance occurring at the origin. Award will be made to a single responsible offeror based on a determination of the most advantageous offer, with past performance weighted as more important than price. The government may utilize the DoD Supplier Performance Risk System to assess supplier, item, and price risks. Technical requirements for the drag beams include specific finishing processes: two coats of gloss white polyurethane (MIL-PRF-85285, Type I, color 17925) and one coat of Fluid Film NAS (per SS8536) on the interior main bore, and one coat of exterior paint (MIL-PRF-85285, color code 36118) with masking per SAC Drawing 70250-32105. Notably, the SS9523 foam specified in drawing 70250-12062 must be omitted. Contractors must adhere to ISO 9000 or equivalent quality standards and follow MIL-STD-2073 and MIL-STD-129 for packaging and marking. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

ANTENNA — 5985015303257 — SPRPA127QWA31

Solicitation # SPRPA127QWA31

Solicitation SPRPA127QWA31, issued by DLA Aviation at Philadelphia for the Department of the Navy on November 6, 2026, seeks quotations for the procurement of two antenna units, NSN 5985-01-530-3257. This requirement is issued under Emergency Acquisition Flexibilities and requires offerors to be government-approved sources of supply. Quotations are due by November 23, 2026, and the intended award will be a single contract granted to the responsible offeror determined to be most advantageous. Past performance is the primary evaluation factor and is weighted more heavily than price. The contract stipulates a delivery timeline of 90 days with FOB Destination terms. Strict adherence to military standards is required, including MIL-STD-2073 for packaging, MIL-STD-129 for marking, and MIL-STD-130 for identification of U.S. Military Property. Additionally, electronic parts must comply with ANSI/ESD S20.20-2021 for ESD control. Inspection and acceptance will occur at the origin. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. Offerors must be registered in the System for Award Management and provide any necessary authorized distributor letters. The solicitation incorporates various FAR and DFARS clauses regarding cybersecurity, Buy American preferences, and hazardous material identification. Evaluation of risk will be conducted using the Supplier Performance Risk System to assess item, price, and supplier risks.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

DEADLINE

CONTROL,RADIO SET T — 5895016571362 — SPRPA127QXA87

Solicitation # SPRPA127QXA87

Solicitation SPRPA127QXA87, issued by DLA Aviation at Philadelphia for the Department of the Navy, is a request for quotations for 10 units of Radio Set Control (NSN 5895-01-657-1362). This procurement is designated as a Critical Application Item and is issued under Emergency Acquisition Flexibilities. Quotations are due by November 23, 2026, with a required delivery timeline of 90 days FOB Destination. The government intends to make a single award based on the most advantageous offer, prioritizing past performance as the primary evaluation factor over price. Performance risk will be further assessed using the DoD Supplier Performance Risk System to evaluate item, price, and supplier risk. The contractor must adhere to strict quality and security standards, including ISO 9001, SAE AS9100, and NIST SP 800-171 for safeguarding covered defense information. Packaging must comply with MIL-STD-2073-1, with specific levels based on shipment destination, and all containers must be marked according to MIL-STD-129. Inspection and acceptance will occur at the origin. Payment requests and receiving reports must be submitted electronically via the Wide Area Workflow system. This solicitation is not a small business set-aside, and offerors must maintain active registration in the System for Award Management.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

DEADLINE

CYLINDER ASSEMBLY,R — 1680008736277 — SPRPA127QVA23

Solicitation # SPRPA127QVA23

Solicitation SPRPA1-27-Q-VA23 is a Request for Quotation issued by DLA Aviation at Philadelphia for the procurement of 24 units of Cylinder Assembly, R, identified by NIIN 008736277 and TDP Version 001. The government intends to make a single award based on the most advantageous offer, prioritizing past performance over price. Evaluation of past performance may include the use of the DoD Supplier Performance Risk System color ratings. Quotations are due by December 7, 2026, and must be submitted to the DLA Aviation office in Philadelphia. The contract requires strict adherence to military standards, including MIL-STD-130 for markings and MIL-STD-2073 for packaging. Specific shipping requirements include FOB Destination terms and the use of ASTM D3951-18 for CONUS shipments or MIL-STD-2073-1 for OCONUS shipments. Contractors must maintain the total equipment baseline configuration and submit any Engineering Change Proposals in accordance with DI-SESS-80639E. Quality management compliance with ISO 9001 or SAE AS9100 is required, and inspection and acceptance will occur at the origin. Invoicing and payment must be processed electronically through the Wide Area Workflow system.

Fluid Power Cylinder and Actuator Manufacturing

POSTED

DEADLINE

SRL POWER SUPPLY — 1680016185503 — SPRPA127QWA30

Solicitation # SPRPA127QWA30

Solicitation SPRPA1-27-Q-WA30, issued by DLA Aviation at Philadelphia for the Department of the Navy, seeks quotations for the overhaul, upgrade, repair, testing, and inspection of seven SRL Power Supplies (P/N 2000792-1, NSN 1680-01-618-5503). The objective is to return these units to a Ready For Issue condition in accordance with L3 Harris Technologies Inc drawing 82340 / 2000792-1. The contractor is responsible for providing all necessary facilities, labor, materials, and tooling, as the government will not provide manufacturing aids or special test equipment. All work must be performed at the identified facility in Amityville, New York, and must comply with quality standards ISO 9001/SAE AS9100 and calibration requirements ANSI/NCSL Z540.3 or ISO-10012-1. The contract specifies a delivery timeline of 90 days with FOB Destination terms, shipping to facilities in New Cumberland, Pennsylvania, and Tracy, California. Packaging must adhere to MIL-STD-2073-1 and MIL-STD-129 for markings. Award will be based on the most advantageous proposal, with past performance weighted more heavily than price. Key administrative requirements include the use of the Wide Area Workflow system for invoicing and strict adherence to FAR 52.211-5 regarding new material requirements. Special provisions are included for Beyond Economical Repair and Missing on Induction determinations, both of which require written concurrence from DCMA.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

BRAKE,ELECTRIC — 6110011820526 — SPRPA127QYA53

Solicitation # SPRPA127QYA53

Solicitation SPRPA1-27-Q-YA53 is a fixed-price procurement issued by the Department of the Navy, Pa DLA Aviation At Philadelphia, for the acquisition of 13 electric brakes (NSN 6110-01-182-0526). The requirement is divided into three delivery lines with required delivery dates of 316, 324, and 424 days. These items are identified as non-critical and will be delivered FOB Origin, with both inspection and acceptance occurring at the source. The procurement is conducted under Emergency Acquisition Flexibilities and requires strict adherence to MIL-STD-2073-1 for preservation and packaging, MIL-STD-129 for marking, and MIL-STD-130 for Unique Item Identification. The government intends to make a single award based on the most advantageous offer, prioritizing past performance over price. Technical acceptability is contingent upon the submission of an authentic, verifiable distributor authorization letter on OEM letterhead and explicit agreement to the warranty terms under FAR 52.246-17. Additionally, the Supplier Performance Risk System will be used to assess item, price, and supplier risks. Contractors must utilize the Wide Area WorkFlow system for invoicing and comply with NIST SP 800-171 and DFARS 252.204-7012 cybersecurity standards for safeguarding covered defense information.

Motor Vehicle Brake System Manufacturing

POSTED

DEADLINE

VALVE ASSEMBLY,SURG — 1680015446629 — SPRPA127QWA29

Solicitation # SPRPA127QWA29

This solicitation, issued by DLA Aviation at Philadelphia for the Department of the Navy, seeks the procurement of three Valve Assembly, Surg units. The contract is a Request for Quotations with a delivery period of 90 days, utilizing FOB Destination shipping terms. Award decisions will be based on a combination of price and past performance, with past performance weighted as the more important factor. The government utilizes the DoD Supplier Performance Risk System (SPRS) to evaluate supplier risk, item risk, and price risk to determine the most advantageous offeror. The contractor must adhere to strict quality control and technical data package requirements, maintaining a system compliant with ISO 9000/9001/9002 or equivalent standards. Key responsibilities include implementing a Repair Quality Plan, managing nonconforming materials, and maintaining detailed historical record files for each item. While the contractor is granted Internal Review Board authority for minor non-conformances, the government retains formal Material Review Board authority for as-is dispositions. Packaging must meet MIL-STD-2073-1 and ASTM D3951-18 standards, and all containers must be marked according to MIL-STD-129, including specific PIID and CLIN identifiers. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and payment. The contract incorporates various FAR and DFARS clauses covering cybersecurity (NIST SP 800-171), the Buy American Act, and prohibitions on certain foreign military companies and telecommunications equipment. Inspection and acceptance are conducted at the origin, and the contractor is required to maintain all inspection reports for at least twelve months following the acceptance of the end items.

Industrial Valve Manufacturing

POSTED

DEADLINE

Military Grade Packaging and Palletization ServicesThis subcontract involves providing specialized military grade packaging, marking, and palletization services for prime contractors supporting DLA Aviation projects through the Department of the Navy. The scope of work requires the preservation and packaging of aviation components, specifically three Radome units, ensuring all processes adhere to MIL-STD-2073-1. Additionally, the contractor must apply UID labeling in accordance with MIL-STD-129 and MIL-STD-130, and perform unit load palletization using MIL-SPEC moisture barriers and cushioning per MIL-STD-147 for FOB Destination delivery. The project is managed by the Pa DLA Aviation office in Philadelphia, with the place of performance located in Philadelphia, Pennsylvania. Interested parties must note the response deadline of November 16, 2026. The services fall under NAICS code 488510, focusing on the rigorous technical standards required for the transport and preservation of critical military aviation hardware.

Freight Transportation Arrangement

POSTED

DEADLINE

Manufacturing and Supply of Radome B387 (NSN 5985-01-609-8999)This subcontract involves the manufacture and supply of three Radome B387 units (NSN 5985-01-609-8999) for prime contractors supporting DLA Aviation projects under the Department of the Navy. The scope of work requires the fabrication of radome structures using RF-transparent materials, composite molding, and specialized RF testing equipment. Performance will take place in Philadelphia, Pennsylvania, under NAICS code 336413. The contractor must adhere to strict quality and regulatory standards, including precision cleaning per MIL-STD-1330 and maintenance of ISO 9001 and NCSL Z540.3 or ISO 10012 calibration standards. Additionally, the provider must comply with the Buy American Program. The solicitation was posted on November 4, 2026, with a response deadline of November 16, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Supply of Aircraft Control Valve (NSN 1680-01-585-5124)This subcontract involves the supply of one fully configured and tested Aircraft Control Valve, identified by NSN 1680-01-585-5124, for prime contractors supporting Department of the Navy supply contracts via DLA Aviation. The scope of work includes the provision of all integrated hardware, software, and firmware. The selected provider must adhere to strict quality standards, requiring either ISO 9001 or SAE AS9100 certification. Technical requirements mandate that the provider submits Engineering Change Proposals in accordance with DI-SESS-80639E and ensures all items are packaged according to MIL-STD-2073. The performance of this contract is centered in Philadelphia, Pennsylvania, under NAICS code 336413. Interested parties must respond by November 16, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS