This Government Contract opportunity from Department Of Justice was posted on June 19, 2017. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Aluminum Sheets

Awarded

SV0089-17Federal

Submission Closed06/08/2017, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 331313

New

DIBBS

Supply of Aluminum Alloy 6061-T6 Flat BarsThis subcontract involves the supply of 136 feet of aluminum alloy 6061-T6 flat, cold finish bars to support prime contractors delivering on Department of Defense supply contracts. The required materials must measure 0.750 inches thick by 3.000 inches wide, with individual lengths ranging between 10 and 12 feet. All supplies are to be delivered to the DLA Distribution Depot Oklahoma located at Tinker AFB. The contract mandates strict adherence to MIL-STD-129 for marking and DFARS 252.223-7008 regarding the restriction of hexavalent chromium. This procurement falls under NAICS code 331313, with a response deadline set for October 29, 2026.

POSTED

DEADLINE

PAD, COOLING, CHEMICAL

Solicitation # SPE2DH-27-T-0186

Solicitation SPE2DH-27-T-0186 is a fixed-price request for quotations issued by the DLA Troop Support Medical Supply Chain FSH for the procurement of chemical cooling pads under NSN 6530-01-597-1084. The requirement is for one package of 50 single-use pads that are stored at room temperature and activated by a firm squeeze and shake, reaching a peak temperature of approximately 33 degrees Fahrenheit with a therapeutic duration of 30 minutes. Due to their hazardous nature, these items cannot be shipped by air. The delivery is required within 20 days after the order date, with the destination for both inspection and acceptance being Moody AFB, Georgia. The procurement is governed by NAICS code 331313 and incorporates various federal and defense acquisition regulations, including DFARS requirements for safeguarding covered defense information and the Hazard Communication Standard for labeling hazardous materials. Packaging must adhere to MIL-STD-2073-1E and marking must comply with MIL-STD-129 and Medical Marking Standard No. 1. Offerors must submit their quotations by October 21, 2026, and are required to specify the source and part number being supplied. Invoicing and payment will be processed electronically through the Wide Area WorkFlow system.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Raw Material Supply – Aluminum/Steel Alloy Sheet StockThe contract entails the supply of certified aluminum or steel alloy sheet stock to meet military or industrial specifications for the fabrication of electronic mounting trays. The materials must adhere to established standards to ensure compatibility, durability, and performance in defense-related applications, and the sourcing is restricted to qualified vendors capable of consistent compliance with quality and certification requirements. The contract falls under NAICS code 331313, indicating a focus on aluminum rolling, drawing, and extruding, and is classified as a subcontract within the Department of Defense structure managed by the Defense Logistics Agency. Performance obligations are tied directly to the production of electronic mounting trays, requiring precise material properties, dimensional tolerances, and traceability of alloy composition. The contract was posted on July 21, 2026, and is administered under the DLA’s procurement system with the identifier SPE4A726P5272. While no specific place of performance or point of contact is listed, all deliveries must support defense manufacturing workflows, and suppliers are expected to maintain certification records for inspection. The transaction is part of the broader DOD supply chain infrastructure aimed at securing critical components for electronic systems.

Defense Logistics Agency

POSTED

DEADLINE

Raw Material Supply for Aluminum/Steel Plate FabricationThe contract entails the supply of raw aluminum or steel plate materials that must comply with military or industrial specifications to support the fabrication of structural components. The materials are intended for use in defense-related applications and must meet stringent quality and performance standards to ensure compatibility with critical manufacturing processes. This subcontract is managed under the auspices of the Defense Logistics Agency, a component of the Department of Defense, and is categorized under NAICS code 331313, which pertains to aluminum Rolled Product Manufacturing. The solicitation was posted on July 21, 2026, and is part of a larger framework to secure essential raw materials for defense infrastructure projects. The place of performance and specific delivery locations are not specified, indicating flexibility for the supplier to fulfill requirements from various facilities, as long as the materials meet the defined specifications. The contract is directly linked to a system used by the Defense Logistics Agency for award tracking, and while no set-aside provisions or small business designations are noted, the focus remains on ensuring a reliable, high-quality supply chain for structural fabrication needs within the defense sector.

Defense Logistics Agency

POSTED

DEADLINE

Aerospace Materials Supply for Stiffener FabricationThe contract entails the supply of certified aerospace-grade raw materials, specifically 7075-T6 aluminum plate and titanium bar stock, to support the fabrication of stiffeners for defense components. All materials must strictly comply with MIL-DTL and AMS technical specifications to ensure integrity, performance, and traceability under demanding operational conditions. The materials will serve as critical inputs in the production of high-strength structural elements used in military aerospace platforms, requiring rigorous quality assurance and documentation throughout the supply chain. This agreement is structured as a subcontract under the Defense Logistics Agency, part of the Department of Defense, with the NAICS code 331313 indicating classification within the primary metals industry. Although no solicitation number or specific place of performance is provided, the contract is linked to a DLA award record, implying it is part of a broader defense supply initiative. The materials must be sourced and delivered to meet exacting military standards, with an emphasis on material certification, dimensional precision, and compliance with defense procurement protocols. The contract supports national defense manufacturing priorities and is subject to all applicable federal regulations governing defense-supplied critical components.

Defense Logistics Agency

POSTED

DEADLINE

Raw Materials & Components SupplyThe contract involves the supply of aerospace-grade aluminum, advanced composites, and AI-enabled components specifically for the fabrication of structural panels, with all materials required to meet stringent defense standards. Full compliance with the Defense Federal Acquisition Regulation Supplement is mandatory, ensuring that sourcing, manufacturing, and delivery adhere to U.S. national security requirements. Comprehensive traceability systems must be implemented from raw material origin through final assembly to guarantee authenticity and prevent the introduction of counterfeit or non-compliant parts. The procurement is structured as a subcontract under the Department of Defense’s Defense Logistics Agency, classified under NAICS code 331313 for aluminum rolling, drawing, and extruding. Performance is expected to support critical defense applications, with no specific geographic restriction listed for place of performance. The contract was posted on July 17, 2026, and is accessible via the DIBBS portal under award number SPE4A726P3877. All supplied materials must align with the technical and regulatory rigor expected in defense aerospace systems, emphasizing quality assurance, supply chain integrity, and domestic sourcing where applicable.

Defense Logistics Agency

POSTED

DEADLINE

Aerospace Materials and Raw Stock SupplyThe contract titled Aerospace Materials and Raw Stock Supply is a subcontract issued by the Defense Logistics Agency under the Department of Defense, focused on providing raw aerospace materials essential for manufacturing air duct components. These materials include aluminum sheets, composite laminates, and insulation, all critical to the structural and thermal performance of aerospace systems. The contract was posted on July 13, 2026, and is categorized under NAICS code 331313, which corresponds to the rolling and drawing of aluminum and aluminum alloys, indicating the specialized nature of the required materials. Performance of the contract is not tied to a specific geographic location, suggesting delivery may occur across multiple production or assembly sites managed by the broader defense supply chain. There is no set-aside designation specified, meaning the contract is open to all eligible vendors without preferential treatment based on size, ownership, or other socioeconomic criteria. Access to contract details is available through the DIBBS system, but no point of contact information is provided in the public data.

Defense Logistics Agency

POSTED

DEADLINE

Raw Material Supply (Aluminum, Titanium, Composites)This subcontract, managed by the Defense Logistics Agency under the Department of Defense, governs the supply of certified aerospace-grade materials essential for component fabrication. The scope of the agreement specifically covers the procurement of aluminum 7075, titanium 6Al-4V, and carbon fiber pre-preg, ensuring that all materials meet strict industry certifications for aerospace use. Classified under NAICS code 331313, the contract was posted on June 30, 2026. It establishes the formal requirements for the delivery of these critical raw materials to support defense manufacturing operations.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Specialized Materials for Structural PanelsThe contract entails the supply of high-performance raw or semi-finished materials, including aluminum alloys and advanced composites, specifically designated for the fabrication of AI-enabled structural panels. These materials must meet stringent performance requirements to support defense applications, ensuring reliability, durability, and compatibility with integrated AI systems in structural components. The work is being procured as a subcontract under the broader procurement framework of the Defense Logistics Agency, operating within the Department of Defense, and is classified under NAICS code 331313, which corresponds to aluminum rolling, drawing, and extruding. The contract was posted on June 26, 2026, and the place of performance and point of contact details are not specified, indicating the supplier has flexibility in logistics coordination as long as deliverables meet technical and temporal obligations. The solicitation does not designate a specific set-aside classification, meaning participation is open to all eligible contractors without preference based on business size or type.

Defense Logistics Agency

POSTED

DEADLINE

Titanium and Specialty Alloy SupplyThe contract awards the supply of titanium and specialty alloys, including nickel-based superalloys, in bar, tube, and sheet forms to support aerospace and high-performance defense applications. These materials are critical for components requiring exceptional strength, heat resistance, and durability under extreme operational conditions, ensuring mission readiness for defense systems and advanced aircraft. The contract is structured as a subcontract and is managed under the Department of Defense through DLA Troop Support, with performance expected to occur in Philadelphia. Although specific monetary value, duration, and solicitation details are not provided, the North American Industry Classification System code 331313 indicates the focus is on ferroalloy and other alloy manufacturing, aligning with the production of high-end metallic materials. The procurement environment reflects a strategic effort to maintain a reliable domestic supply chain for defense-critical materials, with emphasis on quality control, regulatory compliance, and consistent delivery to meet stringent aerospace and military specifications. The opportunity is publicly listed on SAM.gov, enabling qualified suppliers to engage and respond to the requirements.

POSTED

DEADLINE

Titanium and Nickel Alloys SupplyThe contract entails the supply of high-performance titanium and nickel-based alloy materials in sheet, bar, and tube forms, specifically designated for critical defense and aerospace applications where material integrity and performance under extreme conditions are essential. These materials must meet strict mechanical, chemical, and dimensional specifications to ensure reliability in high-stress environments such as aircraft engines, structural components, and mission-critical systems. The contract is structured as a subcontract under the Department of Defense, managed by DLA Troop Support, and aligns with NAICS code 331313 for nonferrous metal rolling, drawing, and extruding, indicating a focus on precision processing of non-ferrous alloys. Performance is required in Philadelphia, with no specific set-aside provisions indicated, and the solicitation was posted on June 23, 2026. While no point of contact or detailed address information is provided, the inclusion of a SAM.gov workspace link suggests that further technical, compliance, and delivery requirements will be outlined through official procurement channels. The nature of the materials and their end-use implies adherence to stringent quality assurance protocols, certification standards, and potentially export control regulations, making supplier qualification, traceability, and consistent production capability paramount for successful contract execution.

DLA Troop Support

POSTED

4 months ago

DEADLINE

N/A

AI Contract Overview

Solicitation SV0089-17, issued by Federal Prison Industries (UNICOR) under the Department of Justice, is a request for quote for a two-year fixed-price requirements contract with Economic Price Adjustment for the procurement of aluminum sheets and extrusions, specifically utilizing 5052 and 6061/6063 alloys. This procurement is 100 percent set aside for small businesses and is categorized under NAICS code 331313. The place of performance for this contract is located in Cumberland, Maryland, with Sommer Starr serving as the primary Contracting Officer. The procurement process included an amendment to provide detailed technical specifications, diagrams for Z-bars, and clarifications on pricing and previous award history. To ensure vendor capability, the solicitation requires the submission of business management questionnaires to verify past performance and relevant contract history. While the original response deadline was set for May 2, 2017, the opening date was subsequently extended to May 3, 2017, at 2:00 pm EST.