Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Raw Materials & Components Supply

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the supply of aerospace-grade aluminum, advanced composites, and AI-enabled components specifically for the fabrication of structural panels, with all materials required to meet stringent defense standards. Full compliance with the Defense Federal Acquisition Regulation Supplement is mandatory, ensuring that sourcing, manufacturing, and delivery adhere to U.S. national security requirements. Comprehensive traceability systems must be implemented from raw material origin through final assembly to guarantee authenticity and prevent the introduction of counterfeit or non-compliant parts. The procurement is structured as a subcontract under the Department of Defense’s Defense Logistics Agency, classified under NAICS code 331313 for aluminum rolling, drawing, and extruding. Performance is expected to support critical defense applications, with no specific geographic restriction listed for place of performance. The contract was posted on July 17, 2026, and is accessible via the DIBBS portal under award number SPE4A726P3877. All supplied materials must align with the technical and regulatory rigor expected in defense aerospace systems, emphasizing quality assurance, supply chain integrity, and domestic sourcing where applicable.

General Info

Supply of defense-grade aluminum, composites, and AI components with full traceability and DFARS compliance for aerospace structural panels.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

331313 - Alumina Refining and Primary Aluminum ProductionView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 17

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of aerospace-grade aluminum, composites, and AI components for structural panel fabrication with DFARS-compliant sourcing and traceability.

Similar Contracts

Same NAICS industry code

MASSAGER, MUSCLEThe contract is for a hand-held muscle massager featuring a foam-covered, ergonomically designed body with non-slip grips, suitable for targeted relief on the neck, arms, shoulders, upper and lower back, hips, glutes, quads, hamstrings, IT bands, calves, shins, and feet. The foam is closed-cell, non-porous, and free of rubber or latex, ensuring durability and ease of cleaning with antibacterial gel or spray. The unit measures 18 inches overall with a 10-inch roller length and is portable for convenient use. It is supplied as a single unit under the NSN 6530-01-600-2392, with a required delivery within 20 days of award. Technical and quality requirements are governed by the DLA Master List, and packaging must comply with DLA standards. The government mandates removal of its identification from non-accepted supplies, and bidders must clearly state the source and part number being offered. The solicitation number is SPE2DH-26-T-5334, issued on July 20, 2026, with responses due by July 27, 2026, under a federal procurement managed by the Department of Defense through the Medical Supply Chain FSH office, with performance located at Fort Bliss, Texas. Primary point of contact is Tina Vu, reachable via email and phone provided.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 22 hours ago

DEADLINE

FOAM ROLLER, PHYSICAL TThe contract is for the procurement of two foam rollers designed for physical therapy, specifically a firm blue round foam roller measuring 6 inches by 12 inches, identified by the NSN 6530-01-600-8194. Each unit must be individually packaged in a sealed commercial container that protects against damage or breakage and then packed in suitable commercial shipping containers to ensure safe and cost-effective delivery to Fort Bragg, North Carolina, with a delivery deadline of 20 days after award. All packaging and labeling must comply with Medical Marking Standard No. 1, which replaces MIL-STD-129, and suppliers must reference this standard for proper identification and marking. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance based on the revision in effect at the time of solicitation or award. The contract also includes provisions for the removal of government identification from non-accepted supplies and may involve covered defense information. Bidders are required to specify the manufacturer, part number, and source of the foam rollers being offered, and all submissions must be received by the response deadline of July 27, 2026. The procurement is managed by the Department of Defense through the Medical Supply Chain FSH, with Tina Vu as the primary point of contact.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 22 hours ago

DEADLINE

FOAM ROLLER, PHYSICAL TThe contract requests two foam rollers for physical therapy use, specified as blue, firm, round, measuring 6 inches in diameter by 36 inches in length, with the NSN 6530-01-600-8186. The items must comply with technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on the acquisition size. Packaging must meet DLA procurement guidelines, and any non-accepted supplies must have government identification removed prior to return. Bidders are required to clearly state the source and part number being offered. The procurement is part of a federal solicitation issued by the Department of Defense’s Medical Supply Chain FSH, with a response deadline of July 27, 2026, and a required delivery within 20 days of award. The solicitation number is SPE2DH-26-T-5339, and inquiries should be directed to Tina Vu at the provided contact information.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 22 hours ago

DEADLINE

Niobium Material Supply

Fermilab - DOE Contractor

POSTED

DEADLINE

Supply of Raw Aluminum Alloy MaterialThe contract calls for the supply of certified aluminum alloy raw material with full traceability from source to delivery, including comprehensive mill test reports to verify composition, mechanical properties, and processing history. All materials must meet stringent defense industry specifications and comply with applicable environmental regulations to ensure suitability for critical aerospace and defense applications. The material is destined for performance at Tinker Air Force Base, with delivery and compliance deadlines strictly enforced. Submission responses are due by July 27, 2026, and the contract is structured as a subcontract under the NAICS code 331313, indicating classification within the aluminum rolling, drawing, and extruding industry. The ordering activity is the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, with no set-aside provisions applied. The procurement is managed through the DIBBS platform, and bidders must ensure adherence to all technical, documentation, and logistical requirements outlined in the solicitation to qualify for award.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

LAMP HOLDER ASSEMBLThe contract is for the procurement of a single lamp holder assembly identified by NSN 6530-01-566-6739, intended for use on Federal Medical surgical ceiling lights. The item must comply with stringent technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which supersede all other specifications including ASTM D3951 and MIL-STD-129. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the product, except for functional uses in batteries, fluorescent lamps, required instruments, sensors, controls, weapon systems, or chemical analysis reagents specified by NAVSEA. Portable fluorescent lamps or instruments containing mercury must be shockproof and equipped with a secondary containment barrier as per NAVSEA 5100-003D. Packaging must adhere to commercial standards and the Medical Marking Standard No. 1, replacing all references to MIL-STD-129, with all units sealed in suitable containers to prevent damage and shipped in commercial exterior containers using the lowest-cost carrier to the specified delivery point. The item is not regulated by the FDA. Delivery is required within 20 days FOB destination with zero variance allowed in quantity, and inspection and acceptance occur at the delivery point. Shipping must avoid parcel post and use the fastest traceable means, with parcel post address and freight shipping details provided for USS ESSEX LHD 2. All packaging and labeling must conform to DLA Packaging Requirements and palletization standards. The solicitation number is SPE2DH-26-T-5292, with a response deadline of July 27, 2026, and an original required delivery date of July 21, 2026.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

HYGIENE KIT, HOSPITAL PThe contract is for a hospital patient hygiene kit containing thirty units, each comprising a hair brush, comb, soap, a 6x10 inch ziplock bag, a razor, a toothbrush, toothpaste, a clear vinyl pouch, a 4x4 inch box label, and five packets of 0.25 ounce shaving cream. The unit of issue is a package of thirty items, with one package ordered under NSN 6530-01-618-9373 and purchase request 7017513490. All items must comply with technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Packaging must adhere to DLA specifications, and government identification must be removed from non-accepted supplies. Covered defense information provisions apply, and bidders must provide the source and part number for each item supplied. Delivery is required within five days of award, and the solicitation, issued under SPE2DH-26-T-5258, closes on July 23, 2026. The procurement is managed by the Department of Defense’s Medical Supply Chain FSH, with Tina Vu as the primary point of contact.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Bronze Strainer Manufacturing and SupplyThe contract calls for the manufacture and supply of precision bronze strainers specifically designed for use in medical sterilization equipment, requiring strict adherence to technical specifications that ensure performance under rigorous clinical conditions. All products must be produced using domestically sourced materials and components to meet federal sourcing requirements, and must be packaged according to military packaging standards to guarantee integrity during transport and storage in austere environments. The work is classified as a subcontract under NAICS code 331313, indicating it falls within the copper foundry industry, and performance is expected to occur at a military postal address designated as FPO with zip code 96678. The solicitation was posted on July 15, 2026, with a response deadline of July 22, 2026, and is being managed by the Department of Defense’s Medical Supply Chain FSH office, reflecting its critical role in supporting military medical operations.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

VALVE, BALL ANLRThe contract specifies the procurement of a ball valve designated as VALVE, BALL ANLR with NSN 6530-01-546-3565 and part number 700321 REV J, requiring one unit for delivery within 20 days to a FPO military address. The item is classified as a medical device regulated by the FDA under Regulation 880.6880, Class II, requiring compliance with 510(k) premarket notification, registration, labeling, and good manufacturing practices. All packaging and marking must adhere to the Medical Marking Standard No. 1, which supersedes MIL-STD-129, and detailed packaging guidelines require each unit to be sealed in a protective container and shipped in commercial exterior containers suitable for safe transport at the lowest freight rate. The valve is subject to strict prohibitions against intentional use of mercury or mercury compounds except in approved applications like batteries or sensors, with additional containment requirements for portable devices. The vendor must ensure compliance with DLA packaging and labeling standards and use only authorized unit of issue codes. The delivery is FOB destination with zero variance allowed, inspection and acceptance occur upon arrival, and shipping must bypass parcel post in favor of traceable methods. The contract references technical and quality requirements from the DLA Master List, and the supplier must comply with all applicable defense logistics regulations including radiation-controlled environments and defense information handling. The point of contact for inquiries is Tina Vu of the Department of Defense, and the solicitation response deadline is July 22, 2026.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

STRAINER, BRONZThe contract is for the procurement of one unit of a brass strainer, NSN 6530-01-546-3556, intended for use with a general purpose sterilizer within the U.S. Department of Defense’s Medical Supply Chain FSH. The solicitation, identified as SPE2DH-26-T-5209, was issued on July 15, 2026, with responses due by July 22, 2026, and requires delivery by July 17, 2026, within a 20-day ADO window. The item must be shipped FOB destination to USS ARLINGTON LPD 24, FPO, ZIP 96678, using the fastest traceable means without parcel post. Packaging must comply with commercial standards and be secure in a sealed unit container to prevent damage, with exterior shipping containers suitable for safe, low-cost carriage to the delivery point. All labeling and marking must adhere to Medical Marking Standard No. 1, replacing MIL-STD-129, and palletization must follow DLA Packaging Requirements for Procurement (RP001). Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced through R and I numbers, and supersede ASTM D3951 where applicable. The item is subject to the Buy American Act and Berry Amendment, with a reduced threshold of $150,000, requiring full disclosure of non-domestic materials. The contractor must comply with cybersecurity mandates including NIST SP 800-171 DoD Assessment Requirements and safeguarding of covered defense information, in addition to FAR and DFARS clauses covering trafficking in persons, equal opportunity, electronic submission of payments via WAWF, and prohibited materials such as hexavalent chromium. Payment and receiving reports must be submitted electronically through WAWF under DFARS Appendix F requirements, and the contractor must maintain active SAM registration with updated socioeconomic and small business status representations. This solicitation is not a small business set-aside, and award will be based on compliance with all technical, packaging, regulatory, and cybersecurity conditions.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

HYGIENE KIT, PATIENTThe HYGIENE KIT, PATIENT is a medical supply item with NSN 6530-01-621-4282, procured in quantities of 10 boxes, each containing 12 units, for delivery within five days to San Antonio, Texas, under contract SPE2DH-26-T-5236. Each unit must be sealed in a protective container to prevent damage and shipped in commercial exterior packaging that ensures safe, cost-effective delivery via common carrier, with compliance to Medical Marking Standard No. 1, which replaces MIL-STD-129. All items must be properly marked per MMS NO. 1 guidelines, and technical and quality requirements referenced through R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Packaging must adhere to DLA requirements, and government identification must be removed from non-accepted supplies. The procurement is governed by federal standards under NAICS code 331313, with the offering deadline set for July 22, 2026, and the primary point of contact is Tina Vu at DLA Troop Support.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

COVER, HEAT TREATMENT PThe item is a heat treatment pad cover, specifically designed for cervical use, measuring 24 inches in length and 6.6 inches in width, made of washable terry cloth material. It is intended for use with heat treatment pads and is to be supplied as individual units, with a quantity of two required. The product is identified by the NSN 6530-01-600-2674 and must comply with the DLA Packaging Requirements for Procurement, incorporating all referenced technical and quality standards listed in the DLA Master List of Technical and Quality Requirements. Bidders are required to specify the source and part number being offered. Delivery is due within 20 days after award, and the procurement is under solicitation SPE2DH-26-T-5225, issued by the Department of Defense’s Medical Supply Chain FSH. The solicitation was posted on July 15, 2026, with responses due by July 22, 2026, and performance will take place at Fort Bliss, Texas, 79918-0000. The primary point of contact for inquiries is Tina Vu, reachable via email and phone.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Supply of Epinephrine Injection (NSN: 6505015273957)The contract mandates the manufacture, packaging, labeling, and delivery of FDA-approved Epinephrine Injection meeting all current Good Manufacturing Practices and Defense Logistics Agency specifications, with the final product destined for a U.S. Navy vessel under FOB Destination terms. The product is identifiable by National Stock Number 6505015273957 and falls under the NAICS code 283410, indicating its classification within pharmaceutical manufacturing. All activities must adhere strictly to regulatory and military standards to ensure safety, potency, and compliance throughout the supply chain. The agreement is structured as a subcontract managed under the Department of Defense through the Defense Logistics Agency, with the work scheduled to be performed in alignment with federal procurement timelines and delivery protocols. The contract was posted on July 20, 2026, and the delivery endpoint is a U.S. Navy vessel, requiring precise logistical coordination and documentation to meet military operational needs. The product must be fully compliant with both FDA and DLA requirements, including proper labeling, traceability, and packaging suitable for military transport and storage conditions.

POSTED

about 22 hours ago

DEADLINE

Wiper Ring Supply – Precision Sealing ComponentThe contract entails the supply of 17 precision-engineered wiper rings, identified by Part Number 351-44900-330A and National Stock Number 5330-01-284-1598, manufactured to meet specific military standards for performance and reliability. Each unit must comply with all relevant technical and quality requirements, including proper packaging and labeling as dictated by defense regulations. Delivery must be completed in full accordance with established logistical protocols to ensure operational readiness and traceability. The contract is structured as a subcontract under the authority of the Defense Logistics Agency, part of the Department of Defense, and classified under NAICS code 332996, indicating its focus on other fabricated metal product manufacturing. The solicitation was posted on July 20, 2026, and performance is expected to align with DLA’s supply chain directives, though the specific delivery location and point of contact are not detailed. Access to official contract records is available through the DIBBS portal using the provided reference number.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 22 hours ago

DEADLINE

Cybersecurity Compliance for Covered Defense InformationThe contract requires the implementation and ongoing maintenance of cybersecurity controls aligned with NIST SP 800-171 to protect covered defense information handled by the contractor. This includes establishing and sustaining a compliant security posture across systems and networks that process, store, or transmit sensitive defense data, ensuring that all required controls are properly configured, monitored, and documented. The contractor must also be prepared to support timely and accurate cyber incident reporting in accordance with federal requirements, enabling rapid response and coordination with defense authorities when security breaches or anomalies occur. This subcontract falls under the NAICS code 541512 for computer systems design services and is issued by the Defense Logistics Agency under the Department of Defense. The work is focused on sustaining compliance with stringent federal cybersecurity standards, and while no specific location is listed for performance, the obligations apply wherever covered defense information is accessed or managed. The contract underscores a critical requirement for continuous adherence to NIST controls and active participation in the defense cyber incident response framework, making cybersecurity expertise and operational readiness key to successful contract execution.

Computer Systems Design Services

POSTED

about 22 hours ago

DEADLINE

Hazardous Materials Compliance & DocumentationThe contract requires strict adherence to OSHA Hazard Communication standards and DFARS 252.223-7001 for all hazardous materials linked to connectors, ensuring proper labeling and accurate safety data sheet generation to meet federal regulatory requirements. All documentation must align with current guidelines to facilitate safe handling, storage, and disposal of chemical substances used in the procurement and integration of these components. This subcontract, issued under NAICS code 541620 by the Defense Logistics Agency within the Department of Defense, mandates compliance as a non-negotiable condition of performance. While specifics on location or point of contact are not provided, the obligation extends to all stages involving hazardous materials associated with connectors, and failure to deliver compliant labeling and SDS documentation could result in contract non-compliance. The posting date indicates this requirement is active for future performance beginning in 2026.

Environmental Consulting Services

POSTED

about 22 hours ago

DEADLINE

Quality Assurance and Inspection ServicesThe contract requires the performance of zero-defect quality inspections using either MIL-STD-1916 or ASQ H1331 sampling methods to verify that all delivered products meet the stringent acceptance standards of the Defense Logistics Agency. These inspections are critical to ensuring full conformance and are conducted to support DLA’s mission of reliably supplying defense systems and materiel with no tolerance for nonconformities. The work is classified under NAICS code 541330, indicating it falls within the professional, scientific, and technical services sector, specifically in the realm of quality assurance and inspection. The contract is structured as a subcontract and is tied directly to DLA operations under the Department of Defense, with performance expected to align precisely with federal quality benchmarks without deviation. All activities must be executed to guarantee that every unit received by DLA is fully compliant, with no room for defective or nonconforming product acceptance.

Engineering Services

POSTED

about 22 hours ago

DEADLINE

Packaging and Marking of Military-Grade ComponentsThe contract requires the provision of packaging and marking services for electrical connectors in strict compliance with MIL-STD-2073-1E for packaging standards and MIL-STD-129 for item marking, all in support of the Defense Logistics Agency. The components are destined for military use under the Department of Defense and must meet exacting federal specifications to ensure durability, traceability, and logistical compatibility across the defense supply chain. The work is structured as a subcontract under NAICS code 423840, which pertains to wholesale trade of electronic components and equipment, indicating the scope is focused on preparation and shipment readiness rather than manufacturing. Performance is expected to align with DLA’s standards for federal supply systems, though no specific location for performance or point of contact is listed. The solicitation is posted under contract SPE7M126V050N and was published on July 20, 2026, with no set-aside provisions indicated, meaning it is open to all qualified subcontractors. Full adherence to military standards is critical, as non-compliance could result in rejection of shipments, delays in delivery, or financial penalties. All packaging must preserve the integrity of the connectors during transport and storage, while marking must include universally recognized DOD identifiers, barcodes, and data matrix codes to enable automated receipt and inventory management at military depots worldwide.

Industrial Supplies Merchant Wholesalers

POSTED

about 22 hours ago

DEADLINE

Supply of Electrical Plug Connectors (MS3406D40-56P / NSN 5935011427787)The contract entails the manufacture and supply of 43 military-spec electrical plug connectors specified as MS3406D40-56P with the NSN 5935011427787, all of which must fully comply with applicable MIL standards to ensure reliability and interoperability in defense systems. The item is critical for military applications requiring high-performance electrical connections under demanding environmental and operational conditions. This is a subcontract issued under the authority of the Defense Logistics Agency within the Department of Defense, with a posting date of July 20, 2026, indicating it is part of a broader procurement effort managed through the DLA’s contracting system. The NAICS code 334417 confirms the scope falls within the aerospace and electronic component manufacturing sector. Performance location and specific delivery details are not yet defined, and no set-aside provisions are indicated, meaning the contract is open to all eligible contractors. The sole point of reference for award and tracking purposes is the DIBBS system under contract number SPE7M126V050N.

Electronic Connector Manufacturing

POSTED

about 22 hours ago

DEADLINE

Domestic Freight and Delivery to DLA DepotTwo reconditioned circuit card assemblies must be transported from the rework facility to the DLA Distribution Depot in Tracy, California, with delivery required no later than August 19, 2026. The shipment is governed by FOB Origin terms, meaning the buyer assumes all risk and responsibility for the goods once they leave the rework facility. The contract falls under NAICS code 484220, indicating it is a domestic freight transportation service, and is classified as a subcontract within the Department of Defense framework. The Defense Logistics Agency is the contracting organization, and the work is being performed under solicitation SPE4A626PX555, with the opportunity posted on July 20, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 22 hours ago

DEADLINE

Supply Chain Traceability and Documentation ServicesThe contract requires the compilation and verification of detailed documentation to establish the prior government ownership and reconditioning history of surplus electronic items, ensuring full compliance with federal requirements prior to submission. This work is critical for maintaining the integrity and traceability of the defense supply chain, as accurate records are necessary to confirm legal and regulatory adherence throughout the lifecycle of the equipment. The contractor must rigorously authenticate provenance and reconditioning data to support transparency and accountability in the disposition process. This subcontract is part of a larger effort managed by the Defense Logistics Agency under the Department of Defense, aligning with NAICS code 541611 for management consulting services. The project involves meticulous record gathering, validation, and formatting to meet stringent government standards, with no specific location specified for performance. The solicitation was posted in July 2026 and is tied to contract SPE4A626PX555, indicating its role within an established procurement pathway for supporting defense logistics operations.

Administrative Management and General Management Consulting Services

POSTED

about 22 hours ago

DEADLINE

Inspection, Packaging, and Marking of Reconditioned ElectronicsThe contract pertains to the final inspection, preservation, packaging, and labeling of reconditioned circuit card assemblies to ensure full compliance with military packaging and marking standards. This effort is critical to maintaining the integrity, functionality, and traceability of electronic components used in defense systems, requiring strict adherence to established federal and military specifications throughout every phase of handling. The work involves detailed quality control procedures to verify that each assembly meets performance criteria prior to being preserved against environmental degradation, securely packaged, and accurately labeled in accordance with mandated military protocols. This subcontract is issued under the Department of Defense, specifically managed by the Defense Logistics Agency, and falls under the NAICS code 493190 for other warehousing and storage. The solicitation was posted on July 20, 2026, and the place of performance is not specified, suggesting the work may be conducted at any approved contractor facility capable of meeting the rigorous defense standards. The contract's purpose is to support the sustainment and readiness of military electronics by ensuring that reconditioned components are handled, stored, and shipped with the same precision and reliability as new units, thereby reinforcing the logistical backbone of defense operations.

Other Warehousing and Storage

POSTED

about 22 hours ago

DEADLINE

Reconditioning of Government Surplus Circuit Card AssembliesThe contract entails the reconditioning of government surplus circuit card assemblies to restore them to original technical specifications and military standards for reuse. This involves the systematic replacement of expired or degraded components, thorough functional testing to ensure operational integrity, and adherence to all applicable military performance and reliability requirements. The work must be performed with precision to guarantee that the returned assemblies meet the identical functional and environmental criteria as newly manufactured units, ensuring they are fully viable for military systems and platforms. This subcontract is issued under the Defense Logistics Agency within the Department of Defense and falls under NAICS code 334418 for electronic component and product manufacturing. The solicitation was posted on July 20, 2026, and the performance location and point of contact details are not specified, though the work is tied to DLA’s broader initiative to extend the life cycle of critical electronic assets. The contractor is expected to deliver reconditioned assemblies that are fully compliant, documented, and ready for immediate integration into defense systems without the need for additional modification or qualification.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 22 hours ago

DEADLINE

Cybersecurity Compliance (CMMC Level 2)The contract requires the implementation and ongoing maintenance of NIST SP 800-171 security controls to protect covered defense information, ensuring alignment with the Defense Federal Acquisition Regulation Supplement (DFARS) 252.204-7012. This includes establishing robust cyber incident reporting procedures to meet federal requirements for timely disclosure of security breaches involving sensitive defense data. The work must support compliance at the Cybersecurity Maturity Model Certification Level 2 standard, which demands a structured approach to cybersecurity readiness, documentation, and continuous monitoring across the organization’s information systems. The effort is classified as a subcontract under the Department of Defense, specifically managed by the Defense Logistics Agency, and falls under the NAICS code for computer systems design and related services. Performance is expected to be carried out in support of federal defense operations, with no geographic restrictions specified.

Computer Systems Design Services

POSTED

about 22 hours ago

DEADLINE