Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supply of Specialized Materials for Structural Panels

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the supply of high-performance raw or semi-finished materials, including aluminum alloys and advanced composites, specifically designated for the fabrication of AI-enabled structural panels. These materials must meet stringent performance requirements to support defense applications, ensuring reliability, durability, and compatibility with integrated AI systems in structural components. The work is being procured as a subcontract under the broader procurement framework of the Defense Logistics Agency, operating within the Department of Defense, and is classified under NAICS code 331313, which corresponds to aluminum rolling, drawing, and extruding. The contract was posted on June 26, 2026, and the place of performance and point of contact details are not specified, indicating the supplier has flexibility in logistics coordination as long as deliverables meet technical and temporal obligations. The solicitation does not designate a specific set-aside classification, meaning participation is open to all eligible contractors without preference based on business size or type.

General Info

Supply of aluminum alloys and composites for AI-enabled defense panels under DLA subcontract, open to all eligible contractors.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

331313 - Alumina Refining and Primary Aluminum ProductionView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE4A7-22-Q-1393.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

GOVERNMENT FIRST ARTICLE TEST

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJun 26

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of high-performance raw or semi-finished materials such as aluminum alloys or advanced composites for fabrication of AI-enabled structural panels.

Similar Contracts

Same NAICS industry code

LITTER, NONRIGID, POLELE

Solicitation # SPE2DH-26-T-6214

This contract is for the procurement of five black, nonrigid, poleless litters, identified by NSN 6530-01-600-7741 and part number PHL-K-B from TacMed Solutions, LLC. The litters must be compact, shoulder-carried units with quick-release straps, featuring a minimum weight capacity of 450 lbs. The required dimensions are 65 by 23 inches when unpacked and 10 by 7 by 1.5 inches when packed. The equipment is regulated by the FDA as a Class I device and must comply with Medical Marking Standard No. 1 and general DLA packaging requirements. Delivery is set for 84 days after order, with the final destination being the USA Med Mat Ctr EUR in Germany. The contract specifies strict adherence to quality and technical requirements, including the removal of government identification from non-accepted supplies and specific commercial packaging standards to ensure safe delivery.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 18 hours ago

DEADLINE

GASKET, DOOR, SURGICAL I

Solicitation # SPE2DH-26-T-6107

This procurement solicitation is for the acquisition of three silicone door gaskets featuring a red stripe, specifically designed for use in surgical instrument sterilizers. The items are identified by NSN 6530-01-588-2449 and are issued on an each basis. The contract is managed by the Department of Defense through the Medical Supply Chain FSH, with a required delivery period of 20 days after receipt of order. All medical acquisitions under this contract must adhere to strict packaging and marking protocols. Each unit must be contained in a sealed container capable of preventing damage and shipped in suitable commercial exterior containers to ensure safe delivery via the most cost-effective carrier. Furthermore, all materials must be marked in accordance with Medical Marking Standard No. 1, which supersedes MIL-STD-129. The procurement also incorporates specific technical and quality requirements as outlined in the DLA master list, including standard DLA packaging and government identification removal protocols.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

VALVE, BALL ANLR

Solicitation # SPE2DH-26-T-6113

This contract, identified by solicitation number SPE2DH-26-T-6113, is for the procurement of one ball annular valve under National Stock Number 6530-01-546-3565. The acquisition is managed by the Department of Defense through the Defense Logistics Agency and is classified as a medical acquisition. Because the item is regulated by the FDA as a Class II device, the supplier must comply with specific regulatory requirements, including registration, listing, labeling, and Good Manufacturing Practices. The contract specifies that the product must not contain mercury or mercury-containing compounds unless specifically exempted. The delivery terms require the item to be shipped FOB Destination to DLA Distribution San Diego, with an expected delivery timeframe of 20 days. Strict packaging and marking protocols are mandated, requiring the use of commercial packaging capable of protecting the contents from damage during transit. Notably, all medical items must be marked in accordance with Medical Marking Standard No. 1, which supersedes MIL-STD-129. The supplier is responsible for ensuring that the unit is properly sealed and contained within suitable commercial exterior shipping containers to ensure safe delivery by common carrier.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

PAD, COOLING, CHEMICAL

Solicitation # SPE2DH-26-T-6109

This solicitation is for the procurement of single-use chemical cooling pads, identified by NSN 6530-01-597-1084. The product is designed to activate via a firm squeeze and shake, reaching an approximate peak temperature of 33 degrees Fahrenheit with a therapeutic duration of 30 minutes. These items must be stored at room temperature and are classified as hazardous materials, meaning they cannot be shipped by air. The unit of issue is a single package containing 50 pads. The contract is issued by the Department of Defense through the Medical Supply Chain FSH and falls under NAICS code 331313. The procurement includes specific technical and quality requirements managed by the DLA, including adherence to DLA packaging standards and protocols for the removal of government identification from non-accepted supplies. The solicitation requires a delivery within 10 days of the administrative delivery date, and certain provisions regarding covered defense information may apply to this acquisition.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Aerospace Titanium Material SupplyThe Department of Defense, through the DLA Aviation office in Oklahoma City, is seeking a subcontractor for the supply of certified titanium alloy raw material or pre-formed stock. This material must be suitable for the fabrication of aerospace nozzle segments and must strictly adhere to military specifications and domestic sourcing requirements. The opportunity is categorized under NAICS code 331313. Interested parties must submit their responses by the deadline of September 18, 2026. Further details regarding this procurement can be accessed via the official government workspace link.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

Raw Material Supply – Aluminum/Steel Alloy Sheet StockThe contract entails the supply of certified aluminum or steel alloy sheet stock to meet military or industrial specifications for the fabrication of electronic mounting trays. The materials must adhere to established standards to ensure compatibility, durability, and performance in defense-related applications, and the sourcing is restricted to qualified vendors capable of consistent compliance with quality and certification requirements. The contract falls under NAICS code 331313, indicating a focus on aluminum rolling, drawing, and extruding, and is classified as a subcontract within the Department of Defense structure managed by the Defense Logistics Agency. Performance obligations are tied directly to the production of electronic mounting trays, requiring precise material properties, dimensional tolerances, and traceability of alloy composition. The contract was posted on July 21, 2026, and is administered under the DLA’s procurement system with the identifier SPE4A726P5272. While no specific place of performance or point of contact is listed, all deliveries must support defense manufacturing workflows, and suppliers are expected to maintain certification records for inspection. The transaction is part of the broader DOD supply chain infrastructure aimed at securing critical components for electronic systems.

Defense Logistics Agency

POSTED

about 1 month ago

DEADLINE

Raw Material Supply for Aluminum/Steel Plate FabricationThe contract entails the supply of raw aluminum or steel plate materials that must comply with military or industrial specifications to support the fabrication of structural components. The materials are intended for use in defense-related applications and must meet stringent quality and performance standards to ensure compatibility with critical manufacturing processes. This subcontract is managed under the auspices of the Defense Logistics Agency, a component of the Department of Defense, and is categorized under NAICS code 331313, which pertains to aluminum Rolled Product Manufacturing. The solicitation was posted on July 21, 2026, and is part of a larger framework to secure essential raw materials for defense infrastructure projects. The place of performance and specific delivery locations are not specified, indicating flexibility for the supplier to fulfill requirements from various facilities, as long as the materials meet the defined specifications. The contract is directly linked to a system used by the Defense Logistics Agency for award tracking, and while no set-aside provisions or small business designations are noted, the focus remains on ensuring a reliable, high-quality supply chain for structural fabrication needs within the defense sector.

Defense Logistics Agency

POSTED

about 1 month ago

DEADLINE

Aerospace Materials Supply for Stiffener FabricationThe contract entails the supply of certified aerospace-grade raw materials, specifically 7075-T6 aluminum plate and titanium bar stock, to support the fabrication of stiffeners for defense components. All materials must strictly comply with MIL-DTL and AMS technical specifications to ensure integrity, performance, and traceability under demanding operational conditions. The materials will serve as critical inputs in the production of high-strength structural elements used in military aerospace platforms, requiring rigorous quality assurance and documentation throughout the supply chain. This agreement is structured as a subcontract under the Defense Logistics Agency, part of the Department of Defense, with the NAICS code 331313 indicating classification within the primary metals industry. Although no solicitation number or specific place of performance is provided, the contract is linked to a DLA award record, implying it is part of a broader defense supply initiative. The materials must be sourced and delivered to meet exacting military standards, with an emphasis on material certification, dimensional precision, and compliance with defense procurement protocols. The contract supports national defense manufacturing priorities and is subject to all applicable federal regulations governing defense-supplied critical components.

Defense Logistics Agency

POSTED

about 1 month ago

DEADLINE

Raw Materials & Components SupplyThe contract involves the supply of aerospace-grade aluminum, advanced composites, and AI-enabled components specifically for the fabrication of structural panels, with all materials required to meet stringent defense standards. Full compliance with the Defense Federal Acquisition Regulation Supplement is mandatory, ensuring that sourcing, manufacturing, and delivery adhere to U.S. national security requirements. Comprehensive traceability systems must be implemented from raw material origin through final assembly to guarantee authenticity and prevent the introduction of counterfeit or non-compliant parts. The procurement is structured as a subcontract under the Department of Defense’s Defense Logistics Agency, classified under NAICS code 331313 for aluminum rolling, drawing, and extruding. Performance is expected to support critical defense applications, with no specific geographic restriction listed for place of performance. The contract was posted on July 17, 2026, and is accessible via the DIBBS portal under award number SPE4A726P3877. All supplied materials must align with the technical and regulatory rigor expected in defense aerospace systems, emphasizing quality assurance, supply chain integrity, and domestic sourcing where applicable.

Defense Logistics Agency

POSTED

about 1 month ago

DEADLINE

Aerospace Materials and Raw Stock SupplyThe contract titled Aerospace Materials and Raw Stock Supply is a subcontract issued by the Defense Logistics Agency under the Department of Defense, focused on providing raw aerospace materials essential for manufacturing air duct components. These materials include aluminum sheets, composite laminates, and insulation, all critical to the structural and thermal performance of aerospace systems. The contract was posted on July 13, 2026, and is categorized under NAICS code 331313, which corresponds to the rolling and drawing of aluminum and aluminum alloys, indicating the specialized nature of the required materials. Performance of the contract is not tied to a specific geographic location, suggesting delivery may occur across multiple production or assembly sites managed by the broader defense supply chain. There is no set-aside designation specified, meaning the contract is open to all eligible vendors without preferential treatment based on size, ownership, or other socioeconomic criteria. Access to contract details is available through the DIBBS system, but no point of contact information is provided in the public data.

Defense Logistics Agency

POSTED

about 1 month ago

DEADLINE

Raw Material Supply (Aluminum, Titanium, Composites)

Defense Logistics Agency

POSTED

about 2 months ago

DEADLINE

Titanium and Specialty Alloy SupplyThe contract awards the supply of titanium and specialty alloys, including nickel-based superalloys, in bar, tube, and sheet forms to support aerospace and high-performance defense applications. These materials are critical for components requiring exceptional strength, heat resistance, and durability under extreme operational conditions, ensuring mission readiness for defense systems and advanced aircraft. The contract is structured as a subcontract and is managed under the Department of Defense through DLA Troop Support, with performance expected to occur in Philadelphia. Although specific monetary value, duration, and solicitation details are not provided, the North American Industry Classification System code 331313 indicates the focus is on ferroalloy and other alloy manufacturing, aligning with the production of high-end metallic materials. The procurement environment reflects a strategic effort to maintain a reliable domestic supply chain for defense-critical materials, with emphasis on quality control, regulatory compliance, and consistent delivery to meet stringent aerospace and military specifications. The opportunity is publicly listed on SAM.gov, enabling qualified suppliers to engage and respond to the requirements.

DLA Troop Support

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Solicitation # SPE4A7-26-T-689M

The Defense Logistics Agency of the Department of Defense has issued a solicitation for the procurement of eight machine bolts under NSN/Part Number 5306-01-622-3939. This federal requirement is identified by solicitation number SPE4A7-26-T-689M and is associated with purchase request 7017784003. The solicitation was officially posted on August 24, 2026, and the deadline for responses is set for September 1, 2026. Interested parties can find further details and submission guidelines through the provided DIBBS link.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 18 hours ago

DEADLINE

HOSE ASSEMBLY, NONME

Solicitation # SPE7M1-26-U-5515

The Defense Logistics Agency, under the Department of Defense, has issued solicitation SPE7M1-26-U-5515 for the procurement of 28 nonmetallic hose assemblies. The items are identified by NSN/Part Number 4720-01-578-5195 and are associated with purchase request 1000240630. This federal solicitation was posted on August 24, 2026, and requires responses by the deadline of September 8, 2026. Interested parties can access further details and submission requirements through the official DIBBS portal.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 18 hours ago

DEADLINE

SCREW, CAP, HEXAGON HEAD

Solicitation # SPE7L4-26-U-1139

The Defense Logistics Agency, under the Department of Defense, has issued solicitation SPE7L4-26-U-1139 for the procurement of 16 hexagon head cap screws. The items are identified by NSN/Part Number 5305-01-613-7854 and are associated with purchase request 1000240635. This federal solicitation was posted on August 24, 2026, and requires responses to be submitted by the deadline of September 8, 2026. Interested parties can find further details and submission guidelines through the official DIBBS portal.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 18 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2282

This solicitation from the Defense Logistics Agency is for the procurement of lead acid, charged, sealed storage batteries with F2 terminals, identified as a critical application commercial off the shelf item. The contract consists of two line items totaling 27 units, with 24 units destined for the Operational Logistics Command U.S. Coast Guard in Norfolk, Virginia, and 3 units for NAVFAC Mid-Atlantic in Virginia Beach, Virginia. The pricing is set as firm fixed price with a delivery requirement of 60 days after order. The batteries are classified as Type I with a non-extendable shelf life of 12 months. Compliance with specific technical and quality requirements is mandatory, including strict adherence to MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Due to the nature of the items, hazardous materials shipping regulations and the hazardous communication standard apply. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds, except where functionally required in batteries.

Battery Manufacturing

POSTED

about 18 hours ago

DEADLINE

Solicitation # SPE7L7-26-T-4921

This contract is a solicitation issued by the Defense Logistics Agency for the procurement of seven power supply units, identified by NSN 6130-01-687-8843. The required hardware corresponds to Siemens Energy Automation Inc. part number 6SL3120-1TE23-0AC0 or Wesco Distribution Inc. part number 804766-20825. This is designated as a critical application item with a required delivery date of August 4, 2026, and a delivery timeframe of 20 days after order. The agreement specifies that delivery is FOB Origin with inspection and acceptance occurring at the destination, specifically Assault Craft Unit 4 in Virginia Beach, Virginia. Compliance with several technical and quality requirements is mandatory, including DLA packaging requirements, physical item marking, and the removal of government identification from non-accepted supplies. Shipping must be conducted via the fastest traceable means, and parcel post is explicitly prohibited.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 18 hours ago

DEADLINE

Solicitation # SPE7L3-26-U-0715

The Defense Logistics Agency, under the Department of Defense, has issued solicitation SPE7L3-26-U-0715 for the procurement of 52 units of webbing straps, identified by NSN 5340-01-649-2493. This federal requirement is tracked under purchase request 1000240638 and was officially posted on August 24, 2026. Interested parties must submit their responses by the deadline of September 8, 2026. Further details and submission instructions are available through the DIBBS portal via the provided solicitation link.

Rope, Cordage, Twine, Tire Cord, and Tire Fabric Mills

POSTED

about 18 hours ago

DEADLINE

CABLE ASSEMBLY, POWE

Solicitation # SPE4A6-26-T-22CG

The Defense Logistics Agency, under the Department of Defense, has issued solicitation SPE4A6-26-T-22CG for the procurement of one power cable assembly. This federal requirement is identified by NSN/Part Number 6150-01-680-9963 and is associated with purchase request 7017924723. The solicitation was posted on August 24, 2026, and the deadline for responses is September 1, 2026. Interested parties can find further details and submission guidelines through the official DIBBS portal.

Current-Carrying Wiring Device Manufacturing

POSTED

about 18 hours ago

DEADLINE

CASE, POWER SUPPLY

Solicitation # SPE7L7-26-T-4912

This contract is a solicitation issued by the Defense Logistics Agency for the procurement of one power supply case, identified by NSN 6130-01-657-3621 and part number H313753-1. The requirement specifies a delivery timeframe of 20 days after order, with shipping handled via traceable means to a destination in Los Alamitos, California. The contract mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under ASTM D3951 and MIL-STD-129, as well as sampling methods aligned with MIL-STD-1916 or ASQ H1331. Key compliance mandates include the prohibition of intentionally added mercury or mercury-containing compounds, except in specific functional cases such as batteries or sensors. The agreement also incorporates requirements for the removal of government identification from non-accepted supplies and the protection of covered defense information. Inspection and acceptance are to take place at the destination, with a zero percent quantity variance allowed.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 18 hours ago

DEADLINE

Solicitation # SPE7L1-26-U-0625

The Defense Logistics Agency of the Department of Defense has issued solicitation SPE7L1-26-U-0625 for the procurement of 186 gaskets. The required items are identified by NSN/Part Number 5330-00-785-6767 and are associated with purchase request 1000240565. This federal solicitation was posted on August 24, 2026, and requires a response by the deadline of September 8, 2026. Interested parties can find further details and submission guidelines through the official DIBBS portal.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 18 hours ago

DEADLINE

Solicitation # SPE7L7-26-Q-2281

This contract is a solicitation from the Defense Logistics Agency for the procurement of three sealed maintenance-free gel lead acid battery cells, part number M356380, under a firm fixed price agreement. The items are destined for the USS Arlington, USS Dwight D Eisenhower, and USS John P Murtha, with a delivery requirement of 60 days after order. The agreement mandates strict adherence to DLA packaging requirements, including MIL-STD-129 and MIL-STD-2073-1E, and requires the provision of MSDS/PSDS due to the hazardous nature of the materials. Quality assurance will be conducted via zero-based sampling plans per MIL-STD-1916 or ASQ H1331. Additionally, the batteries are classified as Type I items with a non-extendable shelf life of 12 months.

Battery Manufacturing

POSTED

about 18 hours ago

DEADLINE

STRUT ASSEMBLY, BY P

Solicitation # SPE4A7-26-T-689T

The Defense Logistics Agency, under the Department of Defense, has issued solicitation SPE4A7-26-T-689T for the procurement of five strut assemblies. The items are identified by National Stock Number 1560-00-777-9248 and are associated with purchase request 7017308797. This federal solicitation was posted on August 24, 2026, and requires a response by the deadline of September 1, 2026. Interested parties can find further details and submission guidelines through the DIBBS portal.

POSTED

about 18 hours ago

DEADLINE

BRACKET, FIRE EXTING

Solicitation # SPE8E6-26-Q-0664

This solicitation, numbered SPE8E6-26-Q-0664, is issued by the Defense Logistics Agency for the procurement of fire extinguisher brackets under NSN 4210-01-729-5790. The requirement is split into three line items, each requesting a quantity of 2 units, for a total of 6 brackets. The contract is established as a Firm Fixed Price agreement with a delivery timeline of 60 days after the order is placed. The items are destined for three separate locations: two in Schofield Barracks, Hawaii, and one at Fort Bragg, North Carolina. All shipments must adhere to strict packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129, with palletization following DLA packaging requirements. Inspection and acceptance will take place at the destination, and the freight terms are FOB Origin.

POSTED

about 18 hours ago

DEADLINE