Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Amalgam Separator Fluid Particulate Removal Filter Supplier

Active

Federal

Response Deadline11/16/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of eight completed and labeled amalgam separator fluid particulate removal filters for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support Maritime Supply Chain. The required units must feature ABS plastic housing, 0.5 micron water filters, and two 0.625 inch NPT ports. Technical specifications mandate an operating vacuum between 21 and 27 kPa and a flow rate of 3.3 liters per second. Compliance with FDA standards and MIL-STD-2073-1E packaging requirements is mandatory for all deliverables. The contract is categorized under NAICS code 339112, with the place of performance located at FPO 96615. Interested parties must adhere to the response deadline of November 16, 2026.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

NAICS

339112 - Surgical and Medical Instrument Manufacturing

Place of Performance

FPO, AP, 96615, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M0-27-T-1045.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SEPERATOR AMALGAM

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 3

subcontract

Response DeadlineNov 16

Submission deadline

Response Deadline

11/16/2026, 05:00:00 PM UTCin 13 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies amalgam separator fluid particulate removal filters for prime contractors delivering DLA supply contracts. Manufactures or sources units with ABS plastic housing, 0.5 micron water filters, and two 0.625 inch NPT ports. Ensures operating vacuum of 21 to 27 kPa and flow rate of 3.3 liters/sec. Must meet FDA standards and MIL-STD-2073-1E packaging. Delivers 8 completed, labeled separator units.

Similar Contracts

Same NAICS industry code

Supply of Dental Pressure GaugesThis subcontract involves the procurement and delivery of specialized dental pressure gauge assemblies, specifically identified by NSN 6515-01-594-0936, to support prime contractors under Department of Defense medical supply contracts. Managed by the Medical Supply Chain MD Surg FSF, the agreement requires all physical units to be delivered in strict accordance with MIL-STD-129 shipping and marking standards and the quality requirements outlined in the DLA Master List Reference RA001. The contract falls under NAICS code 339112 and specifies a place of performance at FPO 96615. Interested parties must adhere to the timeline established by the posting date of November 3, 2026, with a response deadline set for November 9, 2026.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 10 hours ago

DEADLINE

Supply of Safety Hypodermic Syringes and NeedlesThis subcontract with the Department of Defense Medical Supply Chain involves the provision of sterile, single-use safety hypodermic syringes and needles to support prime contractors on DLA supply contracts. The requirement specifies the delivery of 4,000 packages of 1 ML Tuberculin Syringes equipped with 25 Gage by 0.625 inch detachable needles. These medical devices must feature polypropylene barrels, latex-free plunger tips, and low dead space to ensure safety and efficacy. The contract mandates strict adherence to MIL-STD-129 for all shipment marking and requires that each syringe be individually packaged for sterility. Performance for this contract is centered at Fort Bragg, North Carolina. The solicitation was posted on November 3, 2026, with a response deadline of November 9, 2026, falling under NAICS code 339112.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 10 hours ago

DEADLINE

Supply of Corrosion-Resistant Steel Ear SpeculumsThis subcontract involves the supply of four corrosion-resistant steel ear speculums for prime contractors supporting Department of Defense Medical Supply Chain projects. The required items must be 6.0 mm in diameter, finished in black corrosion-resistant steel, and produced without the use of additive manufacturing. All units must adhere to Medical Marking Standard No. 1 and be packaged in sealed unit containers according to MIL-STD-2073-1E. The contract specifies the delivery of NSN 6515-01-603-3412 on a FOB Destination basis to Fort Wainwright. Compliance with the Buy American Act is mandatory for this procurement. The project falls under NAICS code 339112 and is managed by the Medical Supply Chain MD Surg FSF.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 10 hours ago

DEADLINE

Single-Dose Syringe and Needle SupplyThis subcontract involves the supply of single-dose unit of use syringes equipped with male Luer lock adapters and protected needles for prime contractors supporting DLA Troop Support Medical Supply Chain projects. The required products must be manufactured using non-DEHP medical-grade plastics and must adhere to strict regulatory standards, including FDA medical device registration and valid sterility certifications. Managed by the Department of Defense under the Medical Supply Chain Pharm FSA, the contract is categorized under NAICS code 339112. Performance for this requirement is centered at Fort Bragg, with a response deadline set for November 9, 2026.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 10 hours ago

DEADLINE

Supply of Bacteriological Specimen Collection and Transportation SystemsThis subcontract involves the supply of specialized bacteriological specimen collection and transportation systems for prime contractors supporting Department of Defense medical supply contracts through DLA Troop Support. The required systems, identified by NSN 6550014740651, must feature a Venturi hourglass design to prevent gel breakdown and consist of a 5.250 inch plastic swab shaft with soft rayon tips and a 5 ML deep Amies agar gel column with a blue cap. The contract falls under NAICS code 339112 and is managed by the Medical Supply Chain MD Surg FSF. A critical requirement of the agreement is ensuring strict compliance with domestic origin regulations for all delivered components. Performance for this contract is designated for FPO 09564.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 10 hours ago

DEADLINE

Sterile Medical Device Packaging and LabelingThis subcontract involves the supply, final packaging, and marking of sterile suction instruments to support prime contractors on Department of Defense projects for the DLA Troop Support Medical Supply Chain. The scope of work requires packaging units into sets of 20 utilizing sterile barrier materials in accordance with ASTM D3951 standards. Additionally, all products must be marked and labeled following MIL-STD-129 and Medical Marking Standard No. 1 guidelines. The final packaged and labeled products are to be delivered ready for shipment to FPO AE 09517. This requirement falls under NAICS code 339112 and is managed by the Medical Supply Chain MD Surg FSF. Interested parties should note the response deadline of November 9, 2026.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 10 hours ago

DEADLINE

Yankauer Suction Instrument ManufacturingThis subcontract involves the manufacturing of sterile Yankauer suction instruments without control vents for prime contractors supporting Department of Defense Medical Supply Chain projects. The scope of work includes the molding and fabrication of suction tips using medical-grade plastics and the attachment of 72-inch flexible suction tubing. All products must strictly adhere to the DLA Master List technical specifications and Medical Marking Standard No. 1, with a specific prohibition against the use of additive manufacturing. The project is managed under NAICS code 339112 for the Medical Supply Chain MD Surg FSF. The final deliverables consist of completed suction instruments equipped with tubing, with the place of performance designated as FPO 09517. Interested parties should note the response deadline of November 9, 2026.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 10 hours ago

DEADLINE

Supply of Dental Excavating Burs (NSN 6520010032267)This subcontract involves the supply of tungsten carbide dental excavating burs, specifically size 35, for prime contractors supporting Department of Defense medical supply contracts. The required items must adhere to NSN 6520-01-003-2267 and be delivered in packages of ten on a FOB Destination basis. The contractor is responsible for ensuring all products comply with the Buy American Act and meet strict packaging and labeling requirements, including MIL-STD-129, Medical Marking Standard No. 1, and ASTM D3951. This procurement is managed by the Medical Supply Chain MD Surg FSF under NAICS code 339112, with performance taking place at FPO 96616.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 10 hours ago

DEADLINE

Supply of Sterile Hypodermic Syringes (3 ML, Luer-Lock)This subcontract involves the supply of 1,000 boxes of single-use, disposable, sterile hypodermic syringes for prime contractors under the Department of Defense, specifically the Medical Supply Chain MD Surg FSF. The required items are 3 ML Luer-lock, latex-free syringes featuring polypropylene barrels and plungers without needles. Each box must contain 100 units, individually rigid-packed according to ASTM D3951 standards, with labeling that adheres to MIL-STD-129 and MMS No. 1 specifications. The delivered syringes must maintain a shelf life of 60 months. Performance for this contract is centered at Fort Stewart, Georgia. Interested parties should note the response deadline of November 9, 2026, and the classification under NAICS code 339112.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 10 hours ago

DEADLINE

REPLACEMENT PRECORDIAL

Solicitation # SPE2DS-27-T-1398

This procurement, managed by the DLA Troop Support Medical Supply Chain, is for the acquisition of two replacement precordial 6 lead ECG cables (NSN 6515-01-655-0357) specifically designed for the ZOLL Propaq MD monitor/defibrillator. The items are associated with product device code 17116 and must be delivered FOB destination to JB Andrews, MD, within 20 days after order. The solicitation is categorized under NAICS code 339112 and incorporates a HUBZone price evaluation preference. Technical compliance requires that all materials be marked according to Medical Marking Standard No. 1, which supersedes MIL-STD-129. Packaging must be commercial, utilizing suitable sealed unit containers and exterior shipping containers in accordance with ASTM D3951 and DLA packaging requirements (RP001). The contract is governed by various FAR and DFARS clauses, including the Buy American Act, safeguarding of covered defense information, and the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing and receiving reports. Inspection and acceptance will occur at the destination point.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 10 hours ago

DEADLINE

LEAD SET, ELECTRODE, ELE

Solicitation # SPE2DS-27-T-1399

Solicitation SPE2DS-27-T-1399 is a request for quotations issued by the DLA Troop Support Medical Supply Chain for the procurement of two electrode lead sets for electrocardiographs. The specific requirement is for the ZOLL 4 lead ECG cable, identified by NSN 6515-01-655-0317 and ZOLL Medical Corporation part number 8300-0803-01, which is a component of the Propaq MD monitor/defibrillator end item 6515-01-614-0182. The items are to be delivered to the 11th MDG SGSM-PA at JB Andrews, Maryland, with a delivery lead time of 20 days after order. The contract mandates that all materials be marked according to Medical Marking Standard No. 1, which supersedes MIL-STD-129. Packaging must be commercial, utilizing suitable sealed unit containers to prevent damage and commercial exterior shipping containers for safe delivery. Inspection and acceptance will occur at the destination per FAR 52.246-2. Bidders must specify the source and part number being supplied and comply with various federal regulations, including the Buy American Act, DFARS cybersecurity reporting requirements, and the use of the Wide Area WorkFlow system for electronic invoicing and payment.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 10 hours ago

DEADLINE

FORCEPS, SUTURE CLIP

Solicitation # SPE2DS-27-T-1368

Solicitation SPE2DS-27-T-1368 is a request for quotations issued by the Department of Defense, specifically the DLA Troop Support Medical Supply Chain MD Surg FSF, for the procurement of sterile, disposable suture clip removal forceps with converging lower extractor jaws. The requirement is for one package containing 12 units, identified by NSN 6515-01-073-1743. The delivery is required by November 5, 2026, with a delivery window of 20 days after the order is received. The point of contact for this acquisition is Elizabeth Cruz, and the response deadline for quotations is November 9, 2026. The contract mandates strict adherence to DLA packaging and marking standards, including MIL-STD-129, ASTM D3951, and Medical Marking Standard No. 1. Bidders must specify the source and part number being supplied; any proposed alternate parts require a comprehensive data package for evaluation. The procurement is subject to various federal regulations, including the Buy American Act, the Berry Amendment, and DFARS cybersecurity reporting requirements. Inspection and acceptance will occur at the destination, and invoicing must be processed electronically through the Wide Area WorkFlow system. Offers utilizing additive manufacturing are ineligible for award unless specifically authorized.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 10 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

Same awarding agency

MIL-SPEC Packaging and Shipping ServicesThis subcontract for MIL-SPEC Packaging and Shipping Services supports the Department of Defense through the DLA Weapons Support Maritime Supply Chain. The selected provider will perform specialized military-grade packaging for prime contractors, ensuring all items are processed according to MIL-STD-2073-1E and that all marking and labeling adhere to MIL-STD-129 standards. The final deliverable is a fully packaged, labeled, and shipment-ready unit of tubing. The scope of work includes the coordination of First Destination Transportation to the place of performance located at Fort Carson, Colorado. This requirement falls under NAICS code 488510, with a response deadline set for November 16, 2026.

Freight Transportation Arrangement

POSTED

about 10 hours ago

DEADLINE

Manufacturer of Nonmetallic Tubing (NSN 4720-01-680-8474)This subcontract involves the fabrication and supply of nonmetallic tubing for prime contractors supporting the Department of Defense under the DLA Weapons Support Maritime Supply Chain. The scope of work requires the delivery of one unit of NSN 4720-01-680-8474, manufactured strictly according to reference drawings 19207 12600099, 12600101, 12600098, 12600102, and 12600103. Performance will take place in Fort Carson, with a response deadline set for November 16, 2026. To be eligible, the provider must hold US/Canada Joint Certification Program certification and adhere to either SAE AS9003 or ISO 9001 quality standards. It is explicitly stated that additive manufacturing is prohibited for this project. The contract falls under NAICS code 326122 and is managed by the DLA Weapons Support Maritime Supply Chain ESOC Buys.

Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 10 hours ago

DEADLINE

Distribution Box Manufacturer/SupplierThis subcontract, issued by the Department of Defense under the DLA Weapons Support Maritime Supply Chain ESOC Buys, requires the manufacture or sourcing of one Distribution Box for prime contractors, specifically identified by NSN 6110-99-459-9801. The selected supplier is responsible for the complete production cycle, including packaging according to RP001 and ASTM D3951 standards, and marking in compliance with MIL-STD-129 and 29 CFR 1910.1200. The final packaged and labeled unit must be delivered to the specified destination in Fort Bliss. The contract mandates strict adherence to the Buy American Act and NIST SP 800-171 security standards. Operating under NAICS code 335999, the opportunity was posted on November 3, 2026, with a response deadline of November 16, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 10 hours ago

DEADLINE

Supply of Electrical Contact Hardware (NSN 5999-01-360-0921)This subcontract involves the supply of specialized electrical contact hardware, specifically NSN 5999-01-360-0921, for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. The requirement is for two units of Mill-Max part number 0553-1-15-01-11-27-10-0, which must be delivered FOB Origin to Fort Hood, Texas. All items must strictly adhere to MIL-STD-129 and MIL-STD-2073-1E packaging standards. Compliance is mandatory regarding the Buy American Act and the Berry Amendment, and the provider must undergo a NIST SP 800-171 cybersecurity assessment. The opportunity is categorized under NAICS code 335931 and is managed by the Department of Defense. Responses are due by November 16, 2026.

Current-Carrying Wiring Device Manufacturing

POSTED

about 10 hours ago

DEADLINE

Supplier of Thread Piece, Union (NSN 4730013188542)This subcontract involves the manufacture or procurement of two precision-threaded union pieces to support the Department of Defense, specifically for DLA Weapons Support Maritime Supply Chain ESOC Buys. The required hardware must strictly adhere to NSN 4730013188542, featuring specifications for a 1-3/8-12 union end diameter and a 3/8-18 inch female NPT size, ensuring compliance with National Pipe Taper standards. The project falls under NAICS code 332710 and is designated for performance in Pearl Harbor, Hawaii. Interested parties must respond by November 16, 2026, to provide the specified hardware as part of the maritime supply chain requirements.

POSTED

about 10 hours ago

DEADLINE

Supply of Wearing Ring (NSN 4320016037386)This subcontract involves the supply of precision-manufactured wearing rings for prime contractors supporting the Department of Defense, specifically under the DLA Weapons Support Maritime Supply Chain ESOC Buys. The contractor is responsible for manufacturing or sourcing parts that meet the exact technical specifications for NSN 4320016037386 using precision machining equipment. The scope of work requires strict adherence to DLA Packaging Requirements RP001 for Government-Arranged Transportation to ensure the physical rings are properly prepared for shipment. Performance will take place in FPO 96694-1500, with the contract falling under NAICS code 332721. The response deadline for this opportunity is November 16, 2026.

Precision Turned Product Manufacturing

POSTED

about 10 hours ago

DEADLINE

Circuit Card Assembly (NSN 5998-01-633-2982) SupplierThis subcontract involves the manufacture or procurement of one Circuit Card Assembly, identified by NSN 5998-01-633-2982, for prime contractors supporting DLA supply contracts. The supplier must utilize DOD-qualified ESD and EMI protective materials in accordance with MIL-PRF-81705 and strictly adhere to RP001 and MIL-STD-2073-1E packaging standards, as well as MIL-STD-129 marking code 39. Additionally, the contractor is required to complete a CMMC Level 2 self-assessment to ensure cybersecurity compliance. The final packaged and marked assembly must be delivered to the Naval Air Support Equipment Facility located in San Diego, California. This opportunity is managed by the Department of Defense under the DLA Weapons Support Maritime Supply Chain ESOC Buys, with a response deadline of November 16, 2026.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 10 hours ago

DEADLINE

Supply of Fixed Film Resistors (NSN 5905-01-168-3013)This subcontract involves the supply of one fixed film resistor, identified by NSN 5905-01-168-3013, for prime contractors supporting the Defense Logistics Agency Weapons Support Maritime Supply Chain. The selected provider is responsible for sourcing the part and applying specific unit pack markings to denote Lead and Pb-Free attributes. All preservation, packaging, and shipping must strictly adhere to MIL-DTL-39032, MIL-STD-129, and MIL-STD-2073-1E standards. The contract is managed under NAICS code 334416 with performance located at Wheeler Army Airfield. To be eligible, contractors must maintain a valid CAGE code and active SAM registration. The solicitation was posted on November 3, 2026, with a response deadline of November 16, 2026.

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 10 hours ago

DEADLINE

Supplier of Nonmetal Hose Assembly (NSN 4720-01-695-3400)This subcontract involves the supply of a specific nonmetal hose assembly, part number MS52103Z-160520R, meeting NSN 4720-01-695-3400 specifications for the Department of Defense. The contractor is responsible for manufacturing or procuring one unit of the assembly to support prime contractors delivering to the DLA Weapons Support Maritime Supply Chain. The agreement mandates strict adherence to MIL-STD-2073-1E packaging standards and the management of Type I Code Y shelf-life requirements, which are set at 180 months. Performance for this contract is centered in Fort Stewart, Georgia, with a response deadline of November 16, 2026.

All Other Miscellaneous Manufacturing

POSTED

about 10 hours ago

DEADLINE

Nonmetallic Hose Assembly SupplierThis subcontract involves the manufacture or procurement of one nonmetallic hose assembly for prime contractors supporting the Department of Defense under the DLA Weapons Support Maritime Supply Chain. The supplier must ensure the assembly conforms strictly to NSN 4720016957749 and provide all necessary Safety Data Sheets for hazardous materials in compliance with 29 CFR 1910.1200(g). The project falls under NAICS code 326220, with the final product delivered via FOB Destination to a performance location in FPO 96306-0001. Interested parties must submit their responses by the deadline of November 16, 2026.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 10 hours ago

DEADLINE

Fixed Film Resistor Supplier (MIL-PRF-55182/9H)This subcontract involves the supply of a specific fixed film resistor, part number RNC90Y16K700BR, for the Department of Defense under the DLA Weapons Support Maritime Supply Chain. The component must strictly adhere to MIL-PRF-55182/9H(1) specifications and meet all QPL/QML requirements. To ensure product integrity, the supplier must utilize ESD and EMI protective materials according to MIL-PRF-81705 and follow packaging standards set by MIL-STD-2073-1E and MIL-STD-129. The scope of work requires the delivery of one packaged and marked resistor shipped FOB Origin to Fort Stewart, Georgia. Interested parties must ensure they hold the necessary QPL/QML listings to be eligible. The solicitation was posted on November 3, 2026, with a response deadline of November 16, 2026, falling under NAICS code 334416.

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 10 hours ago

DEADLINE

Supply of Compression Sleeves for Tube-Hose FittingsThis subcontract involves the supply of specialized aviation hardware for the Department of Defense, specifically supporting DLA Weapons Support Maritime Supply Chain projects. The contractor is responsible for manufacturing or sourcing four units of Compression Sleeves for Tube-Hose Fittings, identified by NSN 4730016557187. These components must adhere to Critical Application Item standards to ensure safety and performance in aviation environments. A key requirement of the agreement is the provision of mandatory FAA Certification for every shipment, with the contractor obligated to maintain these certification records for a period of five to ten years. The place of performance for this contract is located at Tinker AFB. The solicitation was posted on November 3, 2026, with a response deadline of November 16, 2026.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 10 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS