Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

Amendment 1-N0016422GWS57_00001 Services to support Airborne Electronic Attack Fleet System

Active
N0016422GWS57_00001Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The U.S. Navy’s Naval Surface Warfare Center Crane is seeking noncompetitive services to support the Ram Air Turbine Generator and Generator Regulator Rectifier Unit for the AN/ALQ-249(V)1 Next Generation Jammer – Mid Band Pod and its related subsystems. These services will sustain in-service support across all repair levels including Fleet Support Teams, Organic Depots, and contractor repair sites. The requirement is being awarded solely to Honeywell International Inc. under FAR 6.302-1(a)(2)(ii) due to the company’s exclusive design and manufacturing rights, as well as its irreplaceable technical expertise on these components. The work falls under NAICS code 541330 for engineering services with a projected performance period spanning fiscal years 2022 through 2026. The contract will be awarded through negotiated procedures under FAR Part 15 without a formal request for proposal, and no solicitation will be posted on SAM.gov. Interested parties may submit capability statements, proposals, or quotations directly to the government for consideration, though only Honeywell is eligible for primary award. Subcontracting opportunities must be pursued directly through Honeywell at their Torrance, California location. All contractors must maintain active registration in the System for Award Management, and communications regarding this action must be directed exclusively via email to Theresa Jones, with no telephone inquiries accepted. The deadline for submissions is August 19, 2026, at 4:00 p.m. Eastern Time, and all correspondence must reference the announcement number N0016422RWS57-0001. No amendments or updates to this procurement will be published on SAM.gov.

General Info

Honeywell awarded sole-source contract for NGJ-MB repair support through 2026 under FAR 6.302-1.

Agency

Department Of Defense → Nswc CraneView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

Torrance, CA, 90504, USA

Set-Aside

NONE

Documents

(1)

Amendment 0001 Synopsis for Honeywell Job Order 0001

PDF•amendment

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

Posted

special-notice

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Nswc Crane
ContactsNo contacts available
OfficeCRANE, IN, 47522-5001, USA
Organization / Agency
Department Of Defense → Nswc Crane
View Agency Profile
Office AddressCRANE, IN, 47522-5001, USA
ContactsNo contact information available

Full Description

Show more

  Naval Surface Warfare Center (NSWC) Crane has a requirement for services associated with the Ram Air Turbine Generator (RAT-G) and Generator Regulator Rectifier Unit (GRRU) and its variants/derivatives. The procured services will be in support of the In-Service Support Center (ISSC)/Fleet Support Team (FST), Organic Depot, and other sources of repair (Organization, Intermediate, and Contractor Repair Sites) for the AN/ALQ-249(V)1 Next Generation Jammer – Mid Band Pod (NGJ-MB), all of its sub-systems and any variant systems. 


The proposed job order is for the supplies or services for which the Government intends to solicit and negotiate with one source, (Honeywell International Inc.,2525 West 190th Street, Torrance, CA. 90504-6002), under the authority of FAR 6.302-1(a)(2)(ii). This is being sole sourced because only one source will satisfy the requirement. Honeywell is the sole designer and manufacturer of the RAT-G & GRRU and maintains a high degree of technical expertise concerning the RAT-G & GRRU capabilities.


The applicable NAICS code for this requirement is 541330. The Product Service Code (PSC) is R425 – Engineering Services. Anticipated Period of Performance will be FY22-FY26.


Request for proposal will not be made available through https://www. sam.gov.  No formal request for proposal will be issued. The proposed noncompetitive contract action is anticipated to be awarded under FAR part 15, contracting by negotiations.  The anticipated contract action award date is 3rd Quarter, FY22.   Responsible sources may submit a capability statement, proposal, or quotation which shall be considered by the agency.  Responsible sources may submit a capability statement, proposal, or quotation which shall be considered by the agency.  Companies interested in subcontracting opportunities should contact Honeywell International Inc.,2525 West 190th Street, Torrance, CA. 90504-6002.


Contractors must be properly registered in the System for Award Management (SAM). Offerors may obtain information on SAM registration and annual confirmation requirements by calling 1-866-606-8220 or via the internet at https://www.sam.gov.


Contract Opportunities on https://www.sam.gov/ has officially replaced FBO.gov


Changes for this procurement will not be posted to Contract Opportunities on https://sam.gov/. 


Questions or inquiries should be directed to Theresa Jones, Code 0225, e-mail theresa.a.jones2.civ@us.navy.mil. Telephone calls/questions or inquiries will not be accepted. No questions will be accepted after 19 August 2026 at 4:00 Eastern Time. Reference announcement number N0016422RWS57-0001 in the subject line of e-mails and in ALL correspondence and communications related to this effort.

Similar Contracts

Same NAICS industry code

NAICS: 541330
New
SLED
Construction Management Services IDIQThe Port of Seattle is seeking qualified firms to provide Construction Management services under an Indefinite-Delivery, Indefinite-Quantity (IDIQ) contract to support major construction projects across various phases including planning, design, construction, and closeout. These services will encompass a range of delivery methods such as Design Build, Progressive Design Build, and other alternative project delivery formats, with the primary goal of ensuring projects adhere to authorized schedules, budgets, and quality standards. The contract is intended to streamline oversight and coordination for the Port’s extensive capital improvement initiatives, requiring technical expertise in managing complex infrastructure developments. Primary point of contact for this opportunity is Hala Rabbo, who can be reached via email or phone, with additional support available from Project Manager Ann Davidson. The solicitation is classified under NAICS code 541330, which designates architectural, engineering, and related services. Although the contract is currently posted as a forecast with no official solicitation number or set-aside details, interested parties are encouraged to monitor the provided UI link for updates and future formal solicitations. The performance location will be at various Port of Seattle facilities and project sites, with no specific city or state specified in the metadata, indicating broad geographic scope across Port operations.
Construction Management

POSTED

about 4 hours ago

DEADLINE

N/A
View Details
NAICS: 541330
New
SEEKING QUALIFIED SUBCONSULTANTS IN RIVERSIDE COUNTY/SOCAL TO SUPPORT WELL REPLACEMENT PROJECT WITH WATER DISTRICT
Solicitation # seeking-qualified-subconsultants-riverside-countysocal-support-well-replacement-project-water
GHD Inc. is soliciting qualified subconsultants to support the Corydon Well Replacement Design Project for Elsinore Valley Municipal Water District in Riverside County and Southern California, focusing on engineering, environmental, surveying, geotechnical, permitting, public outreach, and utility location services. The project emphasizes participation from Disadvantaged Business Enterprises, Small Business Enterprises, Women-Owned Businesses, Minority-Owned Businesses, and other certified small business categories including SDB, WOSB, VOSB, and SDVOSB, in alignment with SBA set-aside programs. Interested firms must submit a qualifications package by August 7, 2026, and request solicitation documents no later than 5 p.m. PST on August 14, 2026, with final responses due by September 15, 2026. Primary contact is Charlie Brown at GHD Inc., reachable via email at charles.brown@ghd.com or phone at 404-543-7342. The work will be performed in California and is classified under NAICS code 541330 for engineering services, with additional relevant codes covering environmental, surveying, and public infrastructure support activities.
GHD Inc.

POSTED

about 4 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541330
New
Engineering Design Services
Solicitation # TPJCO Engineering Design Services 26-17
The contract solicits engineering design services to install a Viking Norsafe E-60 Conventional Lifeboat Davit on Pier 7 at the Tongue Point Job Corps Center in Astoria, Oregon. The work requires a licensed Professional Engineer to produce signed and stamped engineering drawings, structural calculations, material specifications, and a bill of materials, along with electronic PDF copies and one full-size printed drawing set. The solicitation is structured as a fee-for-service subcontracting opportunity under Management & Training Corporation, the operator of the facility, and is classified under NAICS Code 541330 with a small business size standard of $9 million in annual revenue. The acquisition is set aside exclusively for small business concerns including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, Veteran-Owned Small Businesses, and Service-Disabled Veteran-Owned Small Businesses, with all subcontractors required to self-certify their business category and provide a Unique Entity Identifier and Taxpayer Identification Number. The contract includes compliance with multiple Federal Acquisition Regulation clauses, including 52.219-8 for small business representation, 52.223-41 for Service Contract Labor Standards tied to Wage Determination SCA WD 2015-5577 Rev. 28, and 52.209-6 mandating debarment disclosures for first-tier subcontractors exceeding $30,000. Projects valued at $40,000 or more are subject to FFATA reporting requirements, and all contractors must adhere to DOL data privacy and reporting protocols, including mandatory encryption of personally identifiable information and reporting of any breach within one hour of discovery. The contractor must indemnify MTC against claims arising from their performance, negligence, or contract violations, and is obligated to pay at least the prevailing federal contractor minimum wage. Invoicing must include purchase order number, service dates, itemized pricing with extended and total amounts, invoice number and date, and must be submitted to MTC’s corporate office in Centerville, Utah. Payment is contingent upon delivery and acceptance of all deliverables. The Place of Performance is strictly limited to the Tongue Point Job Corps Center, and while insurance is not required, the contractor must provide immediate written notice of any delays to performance. Proposals must be submitted by email to Elizabeth Williamson by 2:00 PM PST on August 6, 2024, and must include the bid sheet, W-9,
Tongue Point Job Corps

POSTED

about 4 hours ago

DEADLINE

in about 4 hours
View Details
NAICS: 541330
New
Corydon Well Replacement (C2305)
Solicitation # C2305
Ardurra Group, Inc. is soliciting proposals from Disadvantaged Business Enterprise (DBE) firms to provide comprehensive design, bidding support, and engineering services during construction for the Corydon Well Replacement Project in California, under the project identifier C2305. The work encompasses two phases: Phase 1 includes the preparation of technical specifications, civil site design drawings, and line-bid items for drilling and abandonment of the existing Corydon well in compliance with Riverside County and California State Water Resources Control Board regulations, along with full-time on-site construction management oversight; Phase 2 involves detailed architectural, structural, mechanical, electrical, and instrumentation and controls design drawings, as well as a line-item bid schedule for equipping, testing, and commissioning the new well. Key deliverables include a Preliminary Design Report at up to 30% design depth, review of approximately 200 submittals, assistance with a Domestic Water Supply Permit Amendment, and development of record drawings reflecting field changes, alongside start-up support and operator training. The project requires strict adherence to AWWA potable water well standards, with the new well featuring a 24-inch stainless steel Ful-Flo louvered screen and vertical turbine equipment matching the existing system, and discharge piping tied into the Corydon Blend station and Malaga blending location. All work must comply with SWRCB-DDW, DWR, and EVMWD requirements. The solicitation mandates compliance with federal regulations including the Uniform Administrative Requirements, Governmentwide Debarment and Suspension, Drug-Free Workplace, and the Build America Buy America Act, requiring certified domestic content for iron, steel, and manufactured products with waiver procedures for non-compliant alternatives. Proposers must submit detailed cost proposals broken down by task, including hourly rates and incidental costs, with a not-to-exceed amount to be negotiated post-selection. The evaluation prioritizes demonstrated competence and professional qualifications, with 25% weight assigned to relevant experience and team qualifications, 25% to understanding of the project and technical approach, 20% to schedule and risk mitigation, 10% to innovation, 10% to cost value, and 10% to overall proposal quality, with cost being only one factor in award decisions. Submission is mandatory through the PlanetBids portal by September 1, 2026, with questions due by August 25, 2026, and all proposers must complete mandatory certifications including American Iron and Steel, Lobby
Ardurra Group, Inc.

POSTED

about 4 hours ago

DEADLINE

in 27 days
View Details
NAICS: 541330
New
Corydon Well Replacement Project - Professional Design, Bidding Support, Engineering Services During Construction
Solicitation # corydon-well-replacement-project-professional-design-bidding-support-engineering-services-during-0
The Corydon Well Replacement Project, managed by Elsinore Valley Municipal Water District in Lake Elsinore, California, seeks professional design, bidding support, and ongoing engineering services during construction. The project involves comprehensive civil and water infrastructure engineering to replace an existing well system, ensuring reliable water supply and compliance with current standards. Services required include detailed design development, preparation of bid documents, assistance with the procurement process, and active engineering oversight throughout construction to address technical challenges and ensure project integrity. The solicitation is open to qualified firms, with a preference for Disadvantaged Business Enterprises under Department of Transportation guidelines, and is classified under NAICS code 541330 for engineering services. Respondents must submit proposals by the deadline of September 1, 2026, and should direct inquiries to Katie Neubauer of AKM Consulting Engineers, the lead agency overseeing the procurement and project implementation.
AKM Consulting Engineers

POSTED

about 4 hours ago

DEADLINE

in 26 days
View Details
NAICS: 541330
New
Corydon Well Replacement Project – Professional Design, Bidding Support and Engineering Services During Construction
Solicitation # WO# C2305
The Corydon Well Replacement Project involves the design, construction support, and comprehensive engineering services for a new municipal groundwater production well to replace and permanently abandon the existing Corydon Well located on Elsinore Valley Municipal Water District (EVMWD) property. The project is divided into two phases: Phase 1 focuses on hydrogeological evaluation, aquifer analysis, well design, site civil engineering, and full-time construction management and hydrogeological oversight during drilling and abandonment activities, with technical specifications requiring a 24-inch diameter stainless steel Ful-Flo louvered well screen matching the existing casing depth and adhering to AWWA potable water standards and California and Riverside County regulations. Phase 2 entails detailed architectural, civil, mechanical, structural, electrical, and instrumentation and controls design for well equipping, testing, and commissioning, supported by bidding assistance and ongoing engineering services during construction. The project must comply with the Build America, Buy America Act and 2 CFR Part 184, requiring domestic sourcing of iron, steel, and manufactured products, with full documentation and certification of origin. All work must align with federal funding requirements tied to a $400,000 Bureau of Reclamation grant, triggering compliance with 2 CFR Part 200, including Uniform Administrative Requirements, audit provisions, debarment and suspension restrictions, and the Byrd Anti-Lobbying Act. The successful firm must demonstrate extensive experience in municipal groundwater projects, provide detailed qualifications and resumes of key personnel, hold applicable California professional licenses, and maintain current certifications including the California Air Resources Board Compliance Certificate and Department of Industrial Relations registration for public work. Proposals must include a cost structure broken down by task with hourly rates, travel, and incidental costs, subject to a not-to-exceed limit of $1,000,000, with performance anticipated from November 2026 through May 2028. Evaluation prioritizes demonstrated competence and professional qualifications over cost, with weighted factors for experience, technical approach, schedule, innovation, cost, and proposal quality. Submission through EVMWD’s PlanetBids portal by the September 1, 2026 deadline requires full compliance with Attachment 2 forms, including Conflict of Interest Disclosure, American Iron and Steel Certification, Debarment and Suspension Certification, SAM status, and DBE subconsultant information, along with the executed Professional Services Agreement. Monthly invoicing with progress reports is mandatory, and the District retains audit rights to records for four years after
GEI Consultants, Inc.

POSTED

about 4 hours ago

DEADLINE

in 27 days
View Details
NAICS: 541330
New
SLED
RFQ for Professional Engineering Services for Aircraft Hanger
Solicitation # 27-002
The City of Hickory, North Carolina, has issued a request for quotation for professional engineering services related to the design and construction support of an aircraft hangar. The solicitation, numbered 27-002, was posted on July 10, 2026, with responses due by 9:00 PM Eastern Time on July 31, 2026. This procurement is classified as a SLED procurement, indicating it is targeted toward state, local, or education entities, and no specific set aside or NAICS code has been designated. All work is to be performed in North Carolina, with no additional geographical details provided beyond the state. Chad Huncucker serves as the primary point of contact, reachable via email at chunsucker@hickorync.gov or by phone at (828) 358-8473. Interested parties can access the full solicitation details through the public procurement portal at the provided URL.
City of Hickory

POSTED

about 8 hours ago

DEADLINE

in 16 days
View Details
NAICS: 541330
New
SLED
Construction, Engineering and Inspection (CEI) Scope of Services for the North 3 Utilities Extension Project (UEP)
Solicitation # 2026-RFP-CP-034-JM
McKim and Creed is serving as the design engineer for the North 3 Utilities Extension Project in the northwest quadrant of Cape Coral, Florida, with the project area bounded by the North Spreader Waterway to the west, Bonefish Canal to the south, Burnt Store Road to the east, and Kismet Parkway West. The project encompasses seven primary contract areas featuring essential infrastructure improvements primarily located west of Burnt Store Road, including the installation and upgrade of utility systems. Additionally, the scope includes the design and reconstruction of major roadways—Tropicana Parkway, Yucatan Parkway, Gulfstream Boulevard, and Kismet Parkway West—along with a segment of Burnt Store Road from 1,000 feet south of Tropicana Parkway to 1,500 feet north of Kismet Parkway. Master Pump Stations 900 and 910 are designated as separate contract components within the broader project. The City is currently in the bidding phase for this effort while the North 1 UEP West is approaching construction completion. The solicitation for Construction, Engineering, and Inspection services is open under number 2026-RFP-CP-034-JM, with responses due by September 3, 2026, and is managed by the City of Cape Coral’s Procurement office through Senior Procurement Specialist Jay Myers.
Procurement

POSTED

about 8 hours ago

DEADLINE

in 29 days
View Details
NAICS: 541330
New
Federal
Southwest Regional Maintenance Center (SWRMC) Hull, Mechanical, and Electrical (HM&E) Fleet Technical Assistance (FTA) Follow-On Engineering Services
Solicitation # N5523626R0007
The solicitation N5523626R0007 for Southwest Regional Maintenance Center (SWRMC) Hull, Mechanical, and Electrical (HM&E) Fleet Technical Assistance (FTA) Follow-On Engineering Services requires contractors to provide comprehensive technical, management, and personnel support services to the U.S. Navy Pacific Fleet, primarily based in San Diego, California. The contract scope centers on delivering intermediate-level ship maintenance, fleet technical assistance, assessment events, and contract management oversight for Navy vessels homeported in or visiting the Southwest region. Offerors must submit proposals through the Procurement Integrated Enterprise Environment (PIEE) Solicitation Module, with a mandatory deadline of September 4, 2026, at 5:00 PM local time. Proposals must be structured into four volumes: Technical, Past Performance, Cost Proposal, and Contract Documentation, each with specific page limits and formatting requirements, including strict adherence to Microsoft Office or PDF formats with searchable text, no hyperlinks, and Excel files requiring landscape orientation, visible formulas, and minimum 9-point Times New Roman font. Proposals violating these guidelines risk non-evaluation. Evaluation will be conducted under a best-value trade-off approach, with Technical Approach as the most critical factor, assessed through technical, management, and personnel sub-elements rated on an adjectival scale from Outstanding to Unacceptable, directly tied to performance risk. Past Performance is a mandatory pass/fail criterion, where an Unacceptable rating disqualifies an offeror. Cost Proposal, while the least weighted, becomes decisive when technical proposals are closely matched, and must demonstrate cost realism with submitted spreadsheets and supporting narratives. The contract features a base period from March 1, 2027, to February 29, 2028, with up to four optional one-year periods extending through February 29, 2032, involving labor hours for straight-time, overtime, surge capacity, travel, other direct costs, and contract deliverables. All personnel must hold and maintain an active Secret security clearance within six months of onboarding, possess valid DBIDS access for multiple Navy installations, and complete annual training in cybersecurity, CUI, OPSEC, and DoD privacy policies. The contract mandates strict compliance with security protocols including DD Form 254, OCI disclosures, and substitution controls for key personnel, while requiring adherence to Naval standards, OSHA regulations, and CUI protection measures under DoDI 5200.08. Invoicing must
Southwest Regional Maintenance Center

POSTED

about 8 hours ago

DEADLINE

in 30 days
View Details
NAICS: 541330
New
Federal
Mobile Detection Deployment Program (MDDP) Support Services
Solicitation # 70RWMD26RFI00000004
The Department of Homeland Security is seeking sources to provide deployable field management and scientific support services under the Mobile Detection Deployment Program, targeting capabilities that enhance on-site detection and operational response. This solicitation, identified by number 70RWMD26RFI00000004, is a sources-sought notice issued by the Departmental Operations Acquisition Division III, with a posted date of August 5, 2026, and a response deadline of August 7, 2026. The work is scoped under NAICS code 541330, which covers scientific research and development services, and no set-aside provisions are applied, making it open to all eligible vendors. The primary place of performance is in Herndon, Virginia, though services may be deployed to various field locations as required. All proposals must be submitted through the SAM.gov portal, with direct inquiries to the primary point of contact, William Grimm, via email or phone. The contract will support DHS operations by providing mobile detection systems and related scientific expertise, ensuring rapid and effective deployment in response to emerging threats. The Office is located in Washington, DC, with a ZIP code of 20528, and all contractual deliverables are expected to meet stringent federal standards for field reliability and operational readiness.
Departmental Operations Acquisition Division Iii

POSTED

about 8 hours ago

DEADLINE

in 2 days
View Details
NAICS: 541330
New
Federal
H40 Battle Management Systems Engineering Services Industry Day Announcement
Solicitation # N0017827R3107
The Naval Surface Warfare Center, Dahlgren Division, through its Unmanned & Expeditionary Weapon Systems Division (H40), is seeking contractor support to provide a broad range of engineering, technical, and project management services for combat management systems used across air, surface, and ground platforms. The scope includes system engineering, mechanical and electrical engineering, computer hardware and software development, configuration management, technical writing, and field service support. These services are critical for sustaining and advancing a portfolio of advanced weapon systems including the Battle Management System, Armada, Armed Overwatch, Combatant Craft Medium, Denied Area Sprinter - Hellfire, Expeditionary Launcher Module, Unmanned Aerial Systems, Killchain Automation, Littoral Combat Ship Surface to Surface Missile Module, Precision Strike Package variants, Rapid Dragon, Rotorcraft, Standoff Precision Guided Munition Development, Surrogate, Swarm Carrier, and Tactical Visualization platforms. The solicitation, identified as N0017827R3107 and posted on July 9, 2026, is classified under NAICS code 541330 for engineering services and is open for response until August 13, 2026. The work will be performed primarily at Dahlgren, Virginia, with the primary point of contact being Carmell T. Beard and secondary contact Jason W. Simpson. This is a sources sought notice, indicating the government is gathering information to shape future acquisition strategy rather than issuing a formal solicitation at this stage. The contract will support the Department of Defense's objective to enhance operational capabilities through robust integration and modernization of expeditionary and unmanned weapon systems.
Nswc Dahlgren

POSTED

about 8 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541330
New
Federal
NAWCAD WOLF EPF REQUEST FOR OFFER
Solicitation # N0042126R1024
The Navy’s Naval Air Warfare Center Air Division is seeking proposals for Engineering, Prototyping, and Fabrication Support Services under Solicitation N0042126R1024, with submissions due by 2:00 PM EDT on August 24, 2026. The requirement is for labor, technical data, Other Direct Costs, and contract-acquired property to be delivered at St. Inigoes, Maryland, supporting a multi-year effort spanning a base year from October 8, 2026, through October 7, 2027, with up to four one-year options extending through October 7, 2031. Proposals must be submitted electronically via PIEE in three volumes: Volume 1 contains Key Personnel information, which is a mandatory pass/fail requirement per Attachment P1 with strict submission guidelines including a five-page limit per individual and prohibited use of prospective hires; Volume 2 includes an oral presentation in PowerPoint format limited to 40 slides; and Volume 3 comprises detailed cost and price proposals using specified Excel and Word templates with strict formatting rules requiring 12-point Times New Roman, single-spacing, and Office 2016 compatibility. Evaluation is non-trade-off and prioritizes technical excellence, with awards going to the Highest Technically Ranked Offer with a fair and reasonable price, and no Lowest Price Technically Acceptable process is employed. All key personnel substitutions are tightly controlled during the first 12 months, requiring 15- to 30-day advance notice and approval based on demonstrable equivalency or superiority. The contract includes firm-fixed-price level of effort provisions with a penalty trigger if less than 85% of assigned labor hours are expended, allowing the Government to adjust the CLIN price accordingly. Packaging and marking must comply with Navy-specific directives, prohibiting loose fill materials and requiring ISPM 15-compliant wood packaging, with classified data handled in accordance with NISPOM. Invoicing is exclusively through WAWF using DD Form 250, and all contractors must maintain current SAM registration and comply with representations under FAR clauses including those related to executive compensation reporting, subcontractor responsibility, and prohibited sourcing from entities like the Maduro regime or the People’s Republic of China. Contractors handling controlled unclassified information must achieve CMMC Level 2 certification. Organizational conflicts of interest must be disclosed and mitigated in writing, with waivers prohibited for proprietary data access. No pricing data is populated in Section B
Naval Air Warfare Center Air Division

POSTED

about 8 hours ago

DEADLINE

in 19 days
View Details

More opportunities from Department Of Defense → Nswc Crane

Same awarding agency

NAICS: 333612
New
Federal
Helical Gear
Solicitation # N0016426Q0274
The U.S. Navy’s Naval Surface Warfare Center Crane is soliciting a sole-source contract for ten helical gears aligned with specific drawings, contract data requirements, and a detailed statement of work under Federal Supply Class 3020 and NAICS code 333612. The action is being conducted under FAR 13.106-1 due to the gear’s existing integration into the government’s system, with Louis Allis identified as the sole qualified source. While other vendors may submit capability statements, the government retains exclusive discretion to proceed without competition, and submissions from other firms are considered only for future competitive evaluation purposes. Vendors must be actively registered in the System for Award Management, and all proposals must be submitted electronically to cassidy.k.shaw.civ@us.navy.mil no later than 12:00 PM Eastern Time on August 12, 2026. This solicitation, issued under FAR Part 13, bypasses the standard synopsis requirement per FAR 5.202(a)(13), and any amendments or updates will be posted exclusively on sam.gov, which has replaced FBO.gov as the official platform for federal contract opportunities. It is the vendor’s responsibility to monitor sam.gov for revisions, and only those submitting quotes by the deadline will receive post-deadline modifications or be considered for potential award discussions.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 7 days
View Details
NAICS: 611430
New
Federal
Battery Course
Solicitation # N0016426Q0255
The Naval Surface Warfare Center Crane is soliciting 400 voucher subscriptions for an online Lithium-Ion Battery Development and Manufacturing course under a small business set-aside designated as total, with NAICS code 611430 and a size standard of $15 million. The solicitation, issued as Amendment 0001 to N00164-26-Q-0255, extends the response deadline to August 10, 2026, at 4:00 p.m. EST, and requires full completion of the base solicitation, signed amendment, and evaluation criteria to be considered responsive. Offers must be submitted electronically to Alicia Dobbyn and must come from vendors registered in SAM.gov, with compliance required for all applicable FAR and DFARS clauses, including System for Award Management registration, electronic funds transfer payments, and protections against trafficking, convict labor, and inverted domestic corporations. Award will be made on a Low Price Technically Acceptable basis, with technical acceptability determined by a GO/NO GO evaluation of the vendor’s technical approach and past performance as assessed through the Supplier Performance Risk System, where only Blue, Purple, or Green risk ratings are acceptable. Delivery is FOB Destination to NSWC Crane in Crane, Indiana, with inspection and acceptance conducted by the government at Building 41 Receiving. All deliverables—400 digital library subscriptions to the Electrochemical Society’s workforce development resources—must be provided by September 4, 2026. Contracting and administrative functions are governed by the Wide Area WorkFlow system for invoicing and payment, with the PCO Amy Haworth and TPOC Manda Hayden serving as primary contacts. Cybersecurity compliance is mandatory under DFARS 252.204-7012 and 7025, requiring safeguarding of covered defense information, CMMC Level 1 certification, and reporting of cyber incidents. Additionally, contractors must adhere to supply chain risk management, export control regulations, and prohibitions against subcontracting with entities owned or controlled by state sponsors of terrorism. Packaging and labeling must comply with MIL-STD-129 and MIL-STD-130, including unique item identification via Data Matrix barcodes conforming to ISO/IEC standards. Offerors must affirm their small business status in SAM.gov and provide all required representations and certifications, although no completed submissions or disclosures are included in the solicitation materials.
Professional and Management Development Training

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 513210
New
Federal
Software Licenses New/Renewals
Solicitation # N0016426Q0281
The U.S. Navy’s Naval Surface Warfare Center Crane is seeking to procure software licenses from Ansys Incorporated under a fixed-price contract for the renewal and new acquisition of Ansys Lumerical Multiphysics, INTERCONNECT, and MODE software packages. The solicitation, numbered N0016426Q0281, was issued on July 31, 2026, with a closing date of August 8, 2026, at 12:00 AM Eastern Daylight Time. The requirement is not a small business set-aside and is being conducted under FAR Part 13 procedures with a synopsis exception. The contract involves seven contract line items: three new licenses for multiphysics, INTERCONNECT, and MODE software, each for one unit; two renewals for INTERCONNECT and MODE software, each for two units; and two reinstatement fees associated with previously lapsed licenses for these same products. The service period for all new and renewed licenses is one year from the date of award, with delivery of software and associated services required within 365 calendar days, except for the reinstatement fees, which must be delivered within one calendar day. All deliverables are to be shipped FOB Destination to NSWC Crane, Indiana, with inspection and acceptance occurring at that location. The contract incorporates extensive compliance requirements mandated by federal regulations and defense-specific directives. Offerors must be actively registered in the System for Award Management and maintain accurate representations and certifications. Cybersecurity compliance is mandatory at CMMC Level 1 (Self-Certified), requiring submission of CMMC Unique Identifiers for all systems handling FCI or CUI. The contractor must adhere to DFARS 252.204-7012 for safeguarding covered defense information, DFARS 252.204-7018 for prohibition on covered telecommunications equipment, and DFARS 252.211-7003 for Unique Item Identification under MIL-STD-130 and MIL-STD-129 standards, including two-dimensional data matrix symbology. The order carries a DO rating under the Defense Priorities and Allocations System for national defense purposes. Additional contract clauses address payment terms, prompt payment discounts, electronic funds transfer, disputes, changes, termination, subcontracting, ethical conduct, equal opportunity, human trafficking, sustainable products, and prohibitions on inverted domestic corporations and business with sanctioned regimes. Payment processing will occur through the W
Software Publishers

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 334511
New
Federal
Reutilization, Repair, Refubishment, Technical Assistance, Cable Manufacturing, and Obsolescence Management for Navy Tactical Computer Resource (NTCR)
Solicitation # N0016426RLL03
The Naval Surface Warfare Center Crane Division is preparing to issue a full and open competition for a ten-year indefinite delivery, indefinite quantity contract to support the Navy Tactical Computer Resource program through depot-level reutilization, repair, refurbishment, technical assistance, cable manufacturing, and obsolescence management of legacy electronic systems. The contract will be awarded under a hybrid pricing structure combining Firm-Fixed-Price and Cost-Plus-Fixed-Fee terms, with an estimated total value of $49 million and an anticipated award in the second quarter of FY 2027. This effort serves as a follow-on to the existing N00164-18-D-WP41 contract and will support both U.S. Navy and Foreign Military Sales requirements. All work must be delivered FOB Destination, and contractors must maintain active registration in both SAM.gov and the Joint Certification Program to access controlled information and be eligible to respond. The solicitation number is N0016426RLL03, with the pre-solicitation notice published in August 2026 and responses due by August 14, 2026. Although this notice is for information only and does not constitute a commitment to award a contract, interested parties are directed to the designated point of contact, Tim Kinder, for inquiries and must reference the solicitation number in all communications. Proprietary and classified information will be handled in accordance with strict safeguards to prevent unauthorized disclosure. The North American Industry Classification System code for this opportunity is 334511, and no set-aside provisions are being applied. The contract will be administered by the Department of Defense through the Crane, Indiana office, and all submissions must comply with federal acquisition regulations and security protocols.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 334112
New
Federal
COMPUTER EQUIPMENT
Solicitation # N0016426Q0241
The Naval Surface Warfare Center Crane is soliciting two Dell PowerEdge R760 servers, one Dell PowerVault MD2412 storage array, two APC Smart-UPS power supplies, and one Quantum tape drive under a Small Business Set-Aside with a Firm-Fixed-Price contract, using Brand Name or Equal procurement procedures as authorized by FAR 19.502-2(c). The solicitation number is N0016426Q0241, issued under FAR 12 using simplified acquisition procedures, and responses must be submitted electronically to Alicia Dobbyn at Alicia.a.dobbyn.civ@us.navy.mil by 4:00 PM Eastern Time on August 7, 2026, following an amendment that extended the original July 30, 2026 deadline. All offerors must be currently registered in the System for Award Management (SAM) and must submit complete documentation including the signed base solicitation, signed amendment, completed evaluation criteria, technical evaluation matrix, letter of supply, and product literature for any “Equal” alternatives to be considered responsive. Delivery is FOB Destination to NSWC Crane, 300 Highway 361, Crane, IN 47522-5001, with a required delivery date of October 26, 2026. Compliance with MIL-STD-130 and MIL-STD-129 is mandatory for Unique Item Identification and shipment labeling, requiring two-dimensional Data Matrix symbols compliant with ISO/IEC 16022 and encoded with enterprise identifier and serial number data per ISO/IEC 15434. Technical acceptability is assessed through a GO/NO GO evaluation based on conformance to specifications, on-time delivery, and past performance using Supplier Performance Risk System (SPRS) ratings—any Yellow or Red risk status results in rejection. Pricing is evaluated solely after technical acceptability, with award going to the lowest-priced technically acceptable offer under a Low Price Technically Acceptable (LPTA) method. Electronic invoicing via Wide Area WorkFlow (WAWF) is required, and the contract incorporates critical DFARS clauses including 252.204-7012 (cybersecurity safeguarding of Covered Defense Information), 252.204-7018 (prohibition on certain telecommunications equipment), and 252.22
Computer Storage Device Manufacturing

POSTED

2 days ago

DEADLINE

in 2 days
View Details
NAICS: 541330
New
Federal
SOURCES SOUGHT/REQUEST FOR INFORMATION Sources Sought/(RFI) PAE MARITIME PMS 326 SYSTEMS PROFESSIONAL CONTRACT SUPPORT SERVICES FOR PROGRAM MANAGEMENT
Solicitation # N0016426SNB97
The U.S. Navy’s Naval Surface Warfare Center Crane Division, acting on behalf of the Portfolio Acquisition Executive Maritime PMS 326, is conducting market research through a Sources Sought/Request for Information (RFI) to gather industry input on Systems Professional Contract Support Services for Program Management. This RFI, identified by solicitation number N0016426SNB97 and posted on August 3, 2026, is strictly for planning and informational purposes and does not constitute a solicitation for offers or a commitment to award a contract. Responses are due by 7:00 PM Eastern Time on August 17, 2026, and should address the attached Draft Statement of Work to help the government assess industry capabilities, potential sources, and market conditions. The North American Industry Classification System code associated with this effort is 541330, reflecting engineering services. The office responsible for this effort is located in Crane, Indiana, with a zip code of 47522-5001, and the primary point of contact is Bryan Stratton, reachable via email at bryan.j.stratton2.civ@us.navy.mil or by phone at 812-381-7247. The place of performance is indicated as Washington, D.C., with a zip code of 20376, suggesting that work may be performed remotely or in proximity to federal program management hubs. No set-aside classification is specified, indicating that this RFI is open to all eligible entities regardless of size or socioeconomic status. Responses will inform future procurement decisions but will not result in immediate contract awards.
Engineering Services

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 811310
New
Federal
BAGHOUSE PRVENTIVE MAINTANCE
Solicitation # N0016426Q0264
The contract solicitation N00164-26-Q-0264, issued by the Naval Surface Warfare Center Crane, seeks qualified small businesses to provide quarterly preventive maintenance and inspection services for baghouse dust collectors in Buildings 365 and 366 at the Crane, Indiana facility. This requirement is set aside entirely for small business concern participation and mandates compliance with CMMC Level 2 cybersecurity standards through self-assessment. The initial performance period includes four quarterly services per year for each building, with options available to extend the contract for up to five additional years, structured in annual increments with separate line items for each building. Offerors must be currently registered in the System for Award Management, comply with FAR and DFARS clauses including those related to business ethics, supply chain security, trafficking in persons, and identity verification, and submit proposals via email to the designated contracting officer by the revised closing date of August 10, 2026, at 4:00 PM Eastern Time. The evaluation process will assess proposals based on technical approach, delivery capability, and price, using a best value trade-off methodology rather than lowest price technically acceptable. Performance will be measured against the Statement of Work, which requires adherence to OSHA safety standards, manufacturer guidelines, and specific documentation deliverables including maintenance reports, environmental health plans, and hazard analyses. Invoicing must be submitted exclusively through Wide Area WorkFlow with mandatory notification to both the contracting officer and contracting officer representative. The place of performance and delivery is FOB Destination Crane, IN, and all work must conform to federal, state, and Navy-specific regulations. While the contract structure is fully defined with detailed CLINs and options, pricing details are not provided in the solicitation, and no packaging, marking, or preservation requirements are specified.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 561910
New
Federal
Packaging, Marking, and Logistics to NSWC CraneThe contract requires the packaging and marking of baffle rings in strict compliance with MIL-STD-129 and MIL-STD-130 standards, including the application of unique item identification (UID) markings as mandated. All work must be performed to ensure full adherence to military logistics and traceability requirements. The finished products are to be shipped to NSWC Crane, Indiana, with delivery terms specified as F.o.B. Destination, meaning the supplier is responsible for all transportation costs and risks until the items arrive at the designated location. The solicitation is classified as a subcontract under NAICS code 561910, which corresponds to support activities for animal production, though the nature of the work indicates a focus on defense logistics and packaging services. The opportunity was posted on July 31, 2026, with a response deadline of August 6, 2026, at 6:00 p.m. Eastern Time. Performance is to take place at the Crane, Indiana facility, identified by the zip code 47522, under the oversight of the Department of Defense through NSWC Crane. The contract emphasizes precise compliance with federal military standards and timely delivery to meet operational needs.
Packaging and Labeling Services

POSTED

5 days ago

DEADLINE

in about 22 hours
View Details
NAICS: 541611
New
Federal
Final Certification of Compliance and Quality AssuranceThe contract requires the compilation and submission of the Final Certification of Compliance (CDRL A004) to verify that all delivered units strictly adhere to the contractual specifications, technical drawings, and established quality standards. This deliverable serves as the official attestation that all requirements have been met prior to formal acceptance, ensuring full alignment with the performance and quality expectations outlined in the agreement. The certification must be thorough, accurately reflecting inspection results, test outcomes, and compliance documentation for each unit. Issued as a subcontract under the North American Industry Classification System code 541611 by the Naval Surface Warfare Center Crane, a division of the Department of Defense, this obligation is tied to work performed at Crane, Indiana, with a zip code of 47522. The solicitation was posted on July 31, 2026, and the response deadline for submission is August 6, 2026, at 6:00 PM Eastern Time. Failure to submit the certification by this date may result in non-compliance penalties or delays in contract closeout, making timely and accurate documentation critical to fulfilling the contractual obligations and maintaining the subcontractor’s standing with the agency.
Administrative Management and General Management Consulting Services

POSTED

5 days ago

DEADLINE

in about 22 hours
View Details
NAICS: 541380
New
Federal
Materials Certification and Compliance DocumentationThe contract requires the provision of material certifications for raw materials used in the production of baffle rings, specifically to meet the requirements outlined in CDRL A003. This includes submitting detailed documentation such as mill test reports and proof of compliance with RoHS and REACH regulations to ensure all materials meet stringent environmental and safety standards. The deliverables are critical for validating the integrity and regulatory adherence of components used in defense-related applications, with full transparency and traceability mandated throughout the supply chain. This subcontract is issued under the North American Industry Classification System code 541380 and is managed by the Naval Surface Warfare Center Crane, a division of the Department of Defense. The place of performance is in Crane, Indiana, with a posting date of July 31, 2026, and a deadline for response set for August 6, 2026. All submissions must be completed and delivered by the specified deadline to ensure compliance and avoid contract nonperformance. Failure to provide accurate, complete, and timely certifications could result in rejection of materials and disruption of production schedules.
Testing Laboratories and Services

POSTED

5 days ago

DEADLINE

in about 22 hours
View Details
NAICS: 541380
New
Federal
First Article and Production Testing & Inspection ServicesThe contract requires the execution of first article testing and inspection in strict accordance with drawing 6029156, with all findings and results documented and delivered through the required Contract Data Requirements List item A001. Alongside this initial phase, the contractor must perform continuous production inspection and reporting as specified under CDRL A002, ensuring ongoing compliance with technical specifications throughout the manufacturing process. The work is structured as a subcontract under the NAICS code 541380, and the performance location is designated as Crane, Indiana, with a ZIP code of 47522. The solicitation was posted on July 31, 2026, and responses are due by 6:00 p.m. Eastern Time on August 6, 2026. The contracting activity is managed by the Naval Surface Warfare Center Crane under the Department of Defense, and the services are intended to support critical quality assurance functions for defense-related production. No set-aside provisions are specified, and the contract does not include detailed point of contact information beyond the general agency structure. All deliverables must meet the specified data requirements without deviation, and timely submission is essential to ensure schedule adherence.
Testing Laboratories and Services

POSTED

5 days ago

DEADLINE

in about 22 hours
View Details
NAICS: 332721
New
Federal
Precision Machining of Hydrophone Baffle Rings (P/N 6029156-301 Rev D)The contract entails the manufacture of 175 precision hydrophone baffle rings, identified by part number 6029156-301 Revision D, to be produced across multiple production lots in accordance with drawing 6029156 and MIL-STD quality standards. First article production and testing are required to verify conformance before full-scale manufacturing begins, ensuring all components meet stringent dimensional, material, and performance specifications. The work must be executed under the oversight of the Naval Surface Warfare Center Crane, with performance taking place in Crane, Indiana, 47522. This subcontract is solicited under NAICS code 332721 for precision machining services and requires proposals to be submitted by August 6, 2026, with the solicitation posted on July 31, 2026. All production must comply with military standards for quality, traceability, and documentation, and failure to adhere to these requirements may result in rejection of lots. The contract scope is focused solely on the fabrication of the specified baffle rings, with no additional services or deliverables implied, and no set-aside provisions are specified for small or disadvantaged businesses.
Precision Turned Product Manufacturing

POSTED

5 days ago

DEADLINE

in about 22 hours
View Details