Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

AMENDMENT-Purchase and Installation of Vault Doors

Awarded
47QSSC255294Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Fortress Infrastructure was awarded a single award, Firm-Fixed Price purchase order valued at $484,792.00 for the procurement and installation of secure vault doors at the 51FW/CDN Advanced Programs Office, Osan Air Force Base, Republic of Korea. The scope of work includes eight ICD-compliant primary entrance doors and six ICD 705-compliant interior vestibule doors for Sensitive Compartmented Information Facilities. These specialized doors must meet rigorous security standards, including a minimum 60 dB RF attenuation per NSA 94-106, IEEE 299-2006, and MIL-STD-285, as well as an STC-50 sound transmission rating per ASTM E90. Technical requirements specify 3-inch thick leaves for primary doors and 1-3/4-inch leaves for vestibule doors, with all units requiring dual-contact high-security switches compliant with Air Force Non-Nuclear CMD and integration into existing electronic access control systems. The contract was designated as a Total Small Business Set-Aside under NAICS 332999. Because no small business manufacturers could meet the technical specifications, the Small Business Administration granted a Nonmanufacturer Rule waiver, allowing the small business distributor to provide products manufactured by Allegion Americas/Kreiger Specialty Products. This waiver is valid for a one-time award for up to five years and does not exempt the contract from the Buy American Act or Trade Agreements Act. Final acceptance is based on destination inspection at Osan Air Force Base, requiring mandatory third-party certification of RF and acoustic performance rather than manufacturer self-certification.

General Info

Contract Value

$0

NAICS

332999 - All Other Miscellaneous Fabricated Metal Product Manufacturing

Place of Performance

DC, KOR

Set-Aside

SBA

Award Issued Date

Documents

1

47QSSC255294 - NMR Individual Waiver Request for Secure Room Doors

PDF, High priority: read this firstjustification-and-authorization
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

3 updates
PhaseAwarded
Posted

Combined Synopsis

Notice updated

Set-aside changed from No Set aside used to Total Small Business Set-Aside (FAR 19.5). The notice description changed.

Notice updated

Notice type changed from Combined Synopsis/Solicitation to Solicitation. Response deadline changed from Sep 23, 2025 to Oct 23, 2025. The notice title changed. The notice description changed. The point of contact changed.

Notice updated

Response deadline changed from Oct 23, 2025 to Oct 28, 2025. The notice description changed.

Awarded

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyGeneral Services Administration → Supply Chain Management Contracting Division Gsa/fas/gss/qscb
Contacts2 people available
OfficeWashington, DC, 20006, USA
Office AddressWashington, DC, 20006, USA
Contacts
Jonathan Hankin

Full Description

Show more

The award for Single Award, Firm-Fixed Price (FFP), Purchase Order for eight (8) ICD complaint primary entrance doors and six (6) ICD 705 complaint interior vestibule doors including installation at their Sensitive Compartmented Information Facilities 51FW/CDN Advanced Programs Office, Osan Air Force Base, Republic of Korea was awarded to Fortress Infrastructure $484,792.00

Similar Contracts

Same NAICS industry code

NAICS: 332999
New
DIBBS
SPACER, SLEEVE
Solicitation # SPE4A7-27-R-X068
Solicitation SPE4A7-27-R-X068 is an Indefinite Delivery Purchase Order issued by the DLA Weapons Support ASC for the procurement of 124,000 sleeve spacers, identified by NSN 5365-01-034-2519. The contract is not a small business set-aside and is intended to span five base years or until an aggregate total of 350,000 dollars is reached. Pricing should be based on an estimated annual quantity of 125 units, with minimum delivery orders of 75 and maximums of 201. Delivery is required within 200 days after receipt of order to various CONUS stock locations, with inspection and acceptance occurring at the destination. The award will be based on best value, with a significant emphasis on past performance, specifically SPRS assessments and historical quality and delivery compliance. Technical requirements are governed by the DLA Master List, and sampling must follow MIL-STD-1916 or ASQ H1331. Packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization following RP001. Due to the presence of controlled unclassified information, contractors must obtain CMMC Level 2 certification and upload it to the SPRS by November 10, 2026. Additionally, the item is subject to ITAR or EAR export controls, requiring approved JCP certification and specific DLA training for access to technical data. Invoicing and payment must be processed through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332999
New
SLED
PLOW BLADES, NOSE PIECES, AND SHOES
Solicitation # 39-27
The State of New Hampshire, through the Department of Administrative Services, is soliciting bids for a non-exclusive contract to procure snow plow blades, nose pieces, and shoes. The equipment must be manufactured from new materials by experienced providers capable of producing at least 100 units annually. All components must be compatible with Frink or Viking truck attachments and ready for immediate use without modification. Key deliverables include various carbide blades, adaptor blades, straps, and wing shoes, with specific requirements for ASTM A36 Structural Grade hot rolled flat steel for adapter blades. Bidders are required to submit shop drawings for approval by the NHDOT Bureau of Highway Maintenance and provide Certificates of Analysis for carbide inserts and rubber molding. The award will be granted to the responsible vendor offering the lowest cost for conforming bids, with the possibility of awards by individual items. Technical requirements include specific marking and identification stamps on each blade section, the use of lead-free rust-resistant lacquer, and the exclusion of lacquer on carbide edges to allow for physical inspection. Delivery must be completed within 30 days of a purchase order, with prices quoted as F.O.B. Destination. A pre-inspection is mandatory prior to delivery. Bids must be submitted via email to the Bureau of Purchase and Property by November 9, 2026, and must include a signed transmittal letter, pricing offer, and vendor contact information.
Das Purchasing (statewide Bids & Contracts)

POSTED

about 15 hours ago

DEADLINE

in 19 days
View Details
NAICS: 332999
New
Federal
Request for Information: Additive Manufacturing
Solicitation # N0010427RZ058
The Naval Supply Systems Command Weapon Systems Support is conducting market research through Request for Information N0010427RZ058 to identify qualified sources capable of designing, producing, and delivering piece part components or entire assemblies using additive manufacturing methods. The government is specifically interested in vendors who can meet rigorous manufacturing, material, performance, testing, and quality assurance requirements. While the current focus is on a candidate list of National Item Identification Numbers for valves, actuators, and manifolds, the government anticipates that Level I and SUBSAFE items may become eligible for additive manufacturing in the future. Interested businesses must provide detailed administrative data, descriptions of their manufacturing capabilities, facility certifications such as ISO 9001 or AS9100, and evidence of past performance with similar military or commercial hardware. Additionally, the government is soliciting industry feedback on the development of objective evaluation criteria and the structuring of performance-based incentives for future Firm-Fixed-Price contracts. All produced components must be fully interchangeable with traditionally manufactured equivalents and strictly adhere to the baselines established in Project Peculiar Document 802-8436658. Responses are due by October 22, 2026.
Navsup Weapon Systems Support Mech

POSTED

about 18 hours ago

DEADLINE

in 13 days
View Details

More opportunities from General Services Administration → Supply Chain Management Contracting Division Gsa/fas/gss/qscb

Same awarding agency

NAICS: 336320
New
Federal
STAT-TIS Bulk Fuel Sensor ADA-350835
Solicitation # 47QSSC27Q0024
The General Services Administration, Supply Chain Management Contracting Service Center, is soliciting quotes for the procurement of 36 Networked Automatic Bulk Fuel Sensors, specifically STAT-TIS manufacturer part number SFSN02 (ADA Supplies part number ADA-350835). These systems are designed for automated fuel level monitoring in expeditionary and field environments and must be compatible with M978 HEMTT Tankers, Tactical Refueler Modules, and 5,000-gallon fuel trailers. The sensors must feature non-intrusive ultrasonic measurement with factory pre-calibration and a self-contained solar-assisted power system with battery backup. Delivery is required on a FOB Destination basis to Fort Stewart, Georgia, and is not set aside exclusively for small businesses. To be considered for the all-or-none award, vendors must be registered in the System for Award Management and capable of receiving purchase orders via EDI or the OMS Vendor Portal. A critical requirement is strict compliance with MIL-STD-129R for marking and labeling, including the use of Military Shipping Labels and specific bar-coding standards. Evaluation is a two-step process: vendors must first pass an administrative compliance review, after which the award will be based on the highest technical rating and fair and reasonable pricing. Foreign corporations must maintain a physical address and a resident agent within the United States to be eligible for award.
Motor Vehicle Electrical and Electronic Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in about 15 hours
View Details
NAICS: 336320
New
Federal
STAT-TIS Bulk Fuel Sensors ADA-619590
Solicitation # 47QSSC27Q0025
The General Services Administration Supply Chain Management Contracting Service Center is soliciting quotes for the procurement of 36 STAT-TIS Bulk Fuel Sensors, specifically ADA Supplies part number ADA-619590 (Manufacturer Part Number SFSN03). This is an all-or-none award under solicitation 47QSSC-27-Q-0025, with a delivery location of Fort Stewart, Georgia. The requirement includes not only the hardware but also platform access to the STAT-TIS resource visibility platform, data management capabilities for asset monitoring, and ongoing maintenance and support. Shipping must be on a FOB Destination basis within the Continental United States. To be eligible for award, vendors must be registered in the System for Award Management and capable of receiving purchase orders via EDI or the OMS Vendor Portal. A critical requirement is strict compliance with MIL-STD-129 marking and labeling standards, including the use of machine-readable barcodes and Military Shipping Labels. Foreign corporations must maintain a physical U.S. address and a resident agent. The evaluation process consists of an initial administrative compliance check, followed by a final selection based on the highest technical rating and fair and reasonable pricing. This acquisition is not set aside exclusively for small businesses and falls under NAICS code 336320.
Motor Vehicle Electrical and Electronic Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in about 15 hours
View Details
NAICS: 334515
New
Federal
Brand Name NI – Various PXI/PXIe Test and Measurement Modules
Solicitation # 47QSSC-27-Q-0023
Solicitation 47QSSC-27-Q-0023 is a combined synopsis and request for quote issued by the General Services Administration for the procurement of specific National Instruments (NI) PXI/PXIe test and measurement modules. The requirement consists of five distinct line items, including a digital I/O module, a 3 GHz multiplexer, a waveform generator, a relay module, and a multi-bank multiplexer, all intended for use with a National Instruments PXIe-1084 PXI Express test rack. This is a total small business set-aside procurement conducted under the simplified acquisition procedures of FAR Part 12. The award will be made on an all-or-none basis to the responsible vendor providing the lowest evaluated price that meets all material requirements. Strict adherence to brand-name specifications is required, and all products must be new and unused. Offerors must maintain active registration in SAM.gov and be capable of receiving purchase orders via EDI or the OMS Vendor Portal. Deliveries are destined for Keyport, Washington, and must comply with MIL-STD-129R marking and shipping label requirements. Quotations must be submitted via email by the specified deadline and include all required representations, certifications, and a signed MIL-STD-129R form.
Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 332216
New
Federal
Purchase NSN 5210002212047
Solicitation # 47QSSC27Q0018
Solicitation 47QSSC27Q0018 is a request for quote issued by the General Services Administration for the purchase of 156 Engineer's Taper-Wire-Thickness Gages (NSN 5210-00-221-2047). Each gage must include nine thickness blades ranging from .002 to 1/16th inch, one taper gage blade from 1/64 to 3/16 inch with a 3-inch scale, and one English wire gage blade from 19 to 36 with 1/16 and 1/8 inch slots. All units must be provided with a case and blade lock, and be permanently marked with the manufacturer's name or symbol and part number. The total quantity is split equally with 78 units destined for Atlanta, Georgia, and 78 units for Fort Bliss, Texas, with a requested delivery timeline of 30 days after receipt of order on an FOB Destination basis. Award will be based on the Lowest Price Technically Acceptable (LPTA) criteria. To be considered responsive, offerors must submit a complete quote via email to Amya Watts by October 17, 2026, including the completed RFQ document and a signed MIL-STD-129 certification. Offerors must maintain active registration in SAM.gov and comply with strict packaging and marking standards, specifically MIL-STD-129 for military deliveries and ASTM D-3951 for commercial packaging. The contract is governed by FAR Part 12 for commercial products and includes various federal clauses regarding business ethics, trafficking in persons, and Buy American preferences.
Saw Blade and Handtool Manufacturing

POSTED

1 day ago

DEADLINE

in about 16 hours
View Details
NAICS: 332216
Federal
Brand Name National Stock Numbers: Industry Feedback Request
Solicitation # 47QSSC-25-FH-BRANDNAMERFI
The General Services Administration Supply Chain Management Contracting Division is conducting a continuous Request for Information to validate Brand Name National Stock Numbers (NSNs) and their associated Item Purchase Descriptions. The agency is seeking industry feedback to determine if the requirements for various items, including office equipment, hand and power tools, and specialized supplies, can only be met by the specific manufacturers currently listed or if viable substitute brands and part numbers exist. This effort aims to maximize competition and ensure that brand-name restrictions remain relevant and necessary. Interested respondents must submit their feedback using a designated excel template, providing complete supporting documentation for any proposed substitutes. All submitted literature must clearly reference the associated NSN on every page. The government will not consider submissions for items on the AbilityOne Procurement List or those relying on unauthorized proprietary or restricted technical data. While this is an information-gathering phase, the broader procurement strategy involves a division-wide justification for other than full and open competition with an estimated ten-year spend projection of 595 million dollars, with awards based on fair and reasonable pricing determinations conducted under FAR 12.204 and GSAR 538.71.
Saw Blade and Handtool Manufacturing

POSTED

22 days ago

DEADLINE

in 4 months
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS