Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

ANESTHESIA SET, EPIDURA

Active
SPE2DS-26-T-298AFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of an epidural anesthesia set featuring a 20 gauge catheter and a 17 gauge Tuohy Schliff winged needle, with each package containing ten complete sets. The set comprises 29 components and must be delivered in its original packaging with a minimum shelf life of 12 months, ensuring no more than two months have elapsed between the date of manufacture and the date of delivery to the government. The item is identified by NSN 6515-01-323-6531 and is subject to stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, which governs compliance for both simplified and large acquisitions based on solicitation or award dates. Packaging must adhere to DLA standards, and non-accepted supplies must have all government identification removed prior to return. Bidders are required to clearly state the source and part number being supplied. The solicitation, issued under SPE2DS-26-T-298A, has a response deadline of August 10, 2026, with a required delivery within 20 days of award, and is managed by the Department of Defense’s Medical Supply Chain through the point of contact James Burke.

General Info

Procure 10-set epidural anesthesia kits with 20G catheter and 17G Tuohy needle, NSN 6515-01-323-6531, 12-month shelf life, DLA-compliant, delivery by Sept 2026.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

325412 - Pharmaceutical Preparation ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

SPE2DS-26-T-298A.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUS
Contacts
JAMES BURKE
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
ANESTHESIA SET,EPIDURAL
ANESTHESIA SET, EPIDURAL, 20 GA CATHETER, 10S:
WITH 17 GA TUOHY SCHLIFF WINGED NEEDLE, INCLUDES
29 COMPONENTS IN EPIDURAL SET.
UNIT OF ISSUE IS PACKAGE(PG).
1 PG = 10 EA
SHALL HAVE A SHELF LIFE OF 12 MONTHS.
NOT MORE THAN 2 MONTHS SHALL HAVE ELAPSED FROM
DATE OF MANUFACTURE TO DATE OF DELIVERY TO THE
GOVERNMENT.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
BIDDER: PLEASE SPECIFY SOURCE AND PART NUMBER
BEING SUPPLIED.
ADEQUATE DATA FOR THE NSN/Part Number: 6515-01-323-6531 Quantity: 1 PG Purchase Request: 7017693299QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 325412
New
DIBBS
ALUMINUM HYDROXIDE GEL
Solicitation # SPE2DP-26-T-4441
ALUMINUM HYDROXIDE GEL, USP, is procured under solicitation SPE2DP-26-T-4441 with a unit of issue as one bottle (1 BT or 16 OZ), requiring compliance with DLA’s Medical Marking Standard No. 1 and labeling per MMS No. 1A dated February 4, 2013, superseding MIL-STD-129. The product must have a mandatory 24-month shelf life, with no less than 21 months remaining from the date of manufacture to the date of government delivery. Packaging must meet commercial standards, ensuring each unit is sealed and protected against damage, and shipped in exterior containers suitable for safe transport via common carrier at the lowest cost to the destination specified in the contract. All items must be marked in accordance with DLA’s Medical Marking Standard, including NSN, manufacturer and CAGE code, date of manufacture, expiration date, contract number, and lot number. The item is regulated by the FDA, requiring referral via EBS to a product specialist before award, and must be accompanied by the manufacturer’s part number NDC00536-0091-85 from Watson Pharma Inc., with CAGE code 1DWF9. Delivery is FOB destination within 20 days, with zero variance in quantity and inspection and acceptance occurring at point of delivery. Packaging must conform to MIL-STD-2073-1E, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the document.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 325412
New
DIBBS
HYDROGEN PEROXIDE TOPI
Solicitation # SPE2DP-26-T-4396
Hydrogen Peroxide Topical Solution, USP, is a 3% stabilized topical solution intended for external use only, with clear warnings against use in the eyes or over large body areas and a maximum usage duration of one week. Each unit is a 473-milliliter (16-fluid-ounce) bottle, requiring tight closure, storage at controlled room temperature, protection from freezing and excessive heat, and no shaking. Packaging and labeling must comply with Medical Marking Standard No. 1A dated February 4, 2013, superseding MIL-STD-129, and all units must be sealed in commercial containers suitable for transit and protected from damage. The product is regulated by the FDA and classified as a Type I (Code M) item with a non-extendable shelf life of 24 months. Suppliers must provide Safety Data Sheets (SDS) conforming to 29 C.F.R. 1910.1200 and Hazard Communication Standard (HCS) compliant labels as of June 1, 2015, and must train employees on these requirements. All packaging and shipping must meet commercial standards and ensure safe delivery at the lowest cost to the destination. The item is identified by NSN 6505-00-153-8480, with a purchase request number of 7017684184 and a quantity of 20 bottles. Delivery is FOB destination within 20 days, with zero variance allowed. Solicitation number SPE2DP-26-T-4396, posted August 2, 2026, requires response by August 10, 2026. Approved manufacturers include McKesson, Cardinal Health, and Medline Industries. The contract is administered by the Department of Defense’s Medical Supply Chain, with delivery to Pineville, LA, and point of contact Patrell Postell. All requisitions previously associated with DMLIIS Request ID 1721935 under ACC-L have been canceled without replacement, transitioning to ACCY.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 325412
New
DIBBS
DIBUCAINE OINTMENT
Solicitation # SPE2DP-26-T-4418
Dibucaine Ointment USP is a topical pharmaceutical product containing 1 percent dibucaine as the active ingredient, formulated for rectal administration and external use only. It is supplied in a collapsible tube and includes a rectal applicator, with each unit of issue being a single package containing one ounce or 28 grams of ointment. The product must be stored at temperatures between 15 and 30 degrees Celsius (59 to 86 degrees Fahrenheit) and carries a non-extendable shelf life of 36 months, classified as a TYPE I (CODE Q) item. Packaging and marking must comply with the latest edition of the Medical Marking Standard No. 1 and MIL-STD-2073-1E, ensuring proper government logistics handling. The item is regulated by the FDA, and procurement requires a referral through EBS to verify compliance before award. This product is procured under solicitation SPE2DP-26-T-4418 with a required delivery within five days to Offutt AFB, zip 68113-1044, under FOB destination terms. Quantity is fixed at one package (PG) with zero variance allowed, and inspection and acceptance occur at the delivery point. The National Stock Number is 6505-00-299-9535, and the NDC code is 00536-1211-95. The supplier is The Harvard Drug Group, L.L.C., and the procurement is managed by the Department of Defense’s Medical Supply Chain Pharmacy FSA. Contract data specifies a response deadline of August 10, 2026, with technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements. Covered Defense Information may apply under RD003, and removal of government identification from non-accepted supplies is required per RQ011.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 325412
New
DIBBS
PETROLATUM, WHITE
Solicitation # SPE2DP-26-T-4447
The contract specifies the procurement of Petrolatum, White, USP, with a unit of issue of 1 TU equaling 28 mg, and a total quantity of 1 TU required. The item has a non-extendable shelf life of 36 months and must be packaged in accordance with the Medical Marking Standard No. 1, which supersedes MIL-STD-129, and all packaging must ensure protection against damage and compliance with commercial shipping standards for safe delivery to the destination. The material is not classified as hazardous under FED-STD-313 and must be commercially packaged per ASTM D3951, though any conflicting requirements from the DLA Master List of Technical and Quality Requirements take precedence. Labeling and marking of all containers must strictly follow the latest edition of Medical Marking Standard No. 1, and packaging must be palletized per RP001, using the designated unit pack configuration and ensuring the lowest freight cost to the specified delivery point. Delivery is required within five days of award, FOB destination, with zero variance allowed in quantity, and inspection and acceptance occur upon arrival. The item is to be shipped by the fastest traceable means, excluding parcel post, to the government address in Morrisville, NC, with explicit instructions to avoid using outdated or non-compliant marking systems. The solicitation is issued under contract SPE2DP-26-T-4447, with a required delivery date of August 4, 2026, and the item is identified by NSN 6505-00-254-5527 and NDC 53329-0068-01, supplied by Medline Industries, LP.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 325412
New
DIBBS
OMEPRAZOLE EXTENDED-RE
Solicitation # SPE2DP-26-T-4402
Omeprazole extended-release capsules, 20 mg in 30-count units, are procured under solicitation SPE2DP-26-T-4402 for government use with a total requirement of 23,000 units across multiple contract line items. Each unit must be packaged in sealed containers that protect against damage and shipped in commercial exterior containers to ensure safe, low-cost delivery to designated government destinations. The product must be stored at controlled room temperature between 20 and 25 degrees Celsius and carries a non-extendable shelf life of 18 months. All packaging and labeling must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and conform to DLA packaging requirements including palletization and hazardous material handling per Fed-Std-313 and ASTM D3951 where applicable. The item is regulated by the FDA and requires supplier verification through EBS referral. Shipments must be sent by traceable means only, excluding parcel post, and deliveries are required FOB destination within five days of ship date. The original required delivery date for all orders is no later than August 4, 2026, with one contract line due by July 30, 2026. The contract includes multiple delivery addresses across Fort Lewis, Washington, and Watervliet Arsenal, New York, with strict adherence to unit of issue and quantity per unit pack specifications. The sole source manufacturers listed include Astra Pharmaceutical Products Inc, Sandoz Inc, Amerisource Health Services LLC, and Golden State Medical Supply Inc, with NDC numbers specified for each.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 325412
New
DIBBS
PERMETHRIN CREAM RINSE
Solicitation # SPE2DP-26-T-4404
Permethrin Cream Rinse is a 1% w/v topical pharmaceutical product packaged in a 2 fluid ounce plastic squeeze bottle, each unit including a comb for application. The product has a 24-month shelf life, with a mandatory minimum of 21 months remaining at the time of receipt by the first government activity. It is regulated by the FDA and subject to strict medical acquisition standards, including commercial packaging requirements that ensure the unit is sealed and protected from damage, and shipments are placed in suitable exterior containers for safe transport at the lowest carrier rate. All items must be marked in compliance with Medical Marking Standard No. 1, replacing all references to MIL-STD-129. The product is hazardous and requires compliance with Federal Standard No. 313-E, mandating submission of current Safety Data Sheets (SDS) formatted per 29 C.F.R. 1910.1200 and appropriate Hazard Communication Standard labels prior to award. Each shipment must include a physical copy of the SDS, and suppliers must submit these documents to DLA.MSDS@DLA.MIL with a completed cover sheet. Packaging must meet 49 CFR and ICAO regulations for hazardous materials. Technical and quality requirements are governed by the DLA Master List, and the procurement is subject to Hazard Communication Standard updates. The NSN is 6505-01-256-4972, and the solicitation requires delivery of five units within five days of award, with the contract issued under SPE2DP-26-T-4404 by the Department of Defense, Medical Supply Chain Pharm FSA.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 325412
New
DIBBS
ALBUTEROL SULFATE INHA
Solicitation # SPE2DP-26-T-4437
Albuterol Sulfate Inhalation Aerosol with HFA is a prescription-only medication for oral inhalation, with each actuation delivering 108 micrograms of albuterol sulfate equivalent to 90 micrograms of albuterol base, supplied in an 8.5-gram canister containing 200 metered doses. The product must be stored at room temperature between 59°F and 77°F, protected from extreme heat or cold, and must not be punctured, exposed to flames, or stored near heat sources, as temperatures above 120°F may cause the canister to burst. It is subject to a non-extendable 24-month shelf life and must be labeled with the National Stock Number, manufacturer name, date of manufacture, expiration date, contract number, and lot number. All packaging and marking must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and must be shipped in sealed commercial unit containers and approved shipping containers suitable for safe transport at the lowest rate to the delivery point specified. The product is regulated by the FDA and requires submission of Safety Data Sheets and Hazard Communication Standard-compliant labels as mandated by OSHA’s Globally Harmonized System, with supplier training on these requirements. Delivery is FOB destination within five days, with zero tolerance for quantity variance, and inspection and acceptance occur at the delivery point. The contract is issued under solicitation SPE2DP-26-T-4437 for a quantity of 12 units, with the National Stock Number 6505015436562, and references applicable DLA technical and quality requirements contained in the DLA Master List.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 325412
New
DIBBS
CHLORINE TEST REAGE
Solicitation # SPE2DS-26-T-295L
The contract specifies the procurement of chlorine test reagent in powder pillow form, with each package containing 100 individual 10 mL samples, packaged as one unit of issue labeled PG. The product is designated by NSN 6550-01-460-7597 and is subject to strict technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with compliance controlled by the revision in effect at the solicitation or award date. The item is classified as a TYPE I (CODE S) medical supply with a non-extendable shelf life of 60 months, and no more than eight months may have elapsed between the date of manufacture and delivery to the government. Packaging must meet commercial standards as outlined in Medical Marking Standard No. 1, which supersedes MIL-STD-129, and all labels must clearly display the date of manufacture, expiration or retest date, and the contract or lot number in accordance with MMS1C. The item must be securely packaged in sealed unit containers and shipped in commercial exterior containers suitable for safe transport via common carriers at the lowest possible rate to the designated delivery point. The procurement is issued under solicitation SPE2DS-26-T-295L, with a response deadline of August 10, 2026, and a delivery requirement within 20 days after award. The contracting activity is under the Department of Defense’s Medical Supply Chain, and all packaging, marking, and documentation must fully comply with the applicable DLA requirements for defense medical acquisitions.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 325412
New
DIBBS
ZINC OXIDE OINTMENT
Solicitation # SPE2DP-26-T-4398
Zinc Oxide Ointment USP, 20% strength in 1-ounce collapsible tubes, is procured under contract SPE2DP-26-T-4398 with a total order of 100 tubes across nine line items, each designated by a unique CLIN and purchase request number. The product is classified as a topical skin protectant and must be stored at controlled room temperature not exceeding 30°C (86°F). Each tube contains 28.35 grams and is packaged as a single unit of issue (TU), with strict adherence to packaging standards including MIL-STD-129 and the Medical Marking Standard No. 1, which supersedes all other marking requirements. All packaging must comply with DLA’s Master List of Technical and Quality Requirements, with ASTM D3951 applying only if the material is non-hazardous per FED-STD-313; hazardous material must meet IP025 requirements. The item is regulated by the FDA, and bidders must be verified through an EBS referral. Shelf life is fixed at 36 months with no extension permitted, and the product must be marked with its NDC number (67777-0223-11) and manufacturer details (Dynarex Corp, P/N 1190). Delivery is FOB destination with zero variance allowance, inspection and acceptance occurring at the point of delivery. Shipments must use traceable freight methods only and avoid parcel post. Packaging must ensure protection from damage and conform to commercial standards, with palletization following RP001 guidelines. Eight delivery locations span military installations across North Carolina, Virginia, Louisiana, Massachusetts, and other states, with specified delivery dates ranging from July 15, 2026, to August 4, 2026. Unit price is fixed at $3.00 per tube across all line items, with total contract value reflecting aggregated quantities.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 325412
New
DIBBS
MICONAZOLE NITRATE
Solicitation # SPE2DP-26-T-4428
Miconazole Nitrate Cream, USP 2% in a 1 oz tube is procured under solicitation SPE2DP-26-T-4428 with a unit of issue as a tube and a required shelf life of 36 months, of which no less than 31 months must remain from the date of manufacture to the date of delivery to the Government. The product must be manufactured by Taro Pharmaceuticals U.S.A., Inc. with NDC 51672-2001-02 and complies with all applicable FDA regulations. Packaging must adhere strictly to Commercial Packaging standards as specified in the DLA Master List of Technical and Quality Requirements, with each unit sealed in a protective container and shipped in commercial exterior containers suitable for safe transit at the lowest carrier rate. Marking must follow Medical Marking Standard No. 1A dated February 4, 2013, superseding MIL-STD-129, and all external labeling must conform to this standard. The item must be stored at controlled room temperature between 59°F and 86°F (15°C–30°C). Delivery is due within 20 days FOB destination, with no tolerance for quantity variance, and inspection and acceptance occur at the delivery point. The procurement is governed by DLA packaging and quality requirements, and all documentation, including packaging and labeling, must align with DLA’s Medical Marking Standard No. 1. The NSN is 6505010043508, and the purchase request number is 7017693914.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 325412
New
DIBBS
SODIUM CHLORIDE INJECT
Solicitation # SPE2DP-26-T-4440
Sodium Chloride 0.9% Injection, USP, in 250 mL units, is procured under contract SPE2DP-26-T-4440 with a requirement for 4 packaging groups, each containing 24 bags, totaling 96 bags. The product must comply with all technical and quality specifications outlined in the DLA Master List of Technical and Quality Requirements, including packaging and marking standards per Medical Marking Standard No. 1, which supersedes MIL-STD-129. Each unit must be sealed in commercial-grade containers that protect against damage and breakage, and shipped in exterior containers suitable for safe delivery via common carrier at the lowest cost to the designated destination. The product is regulated by the FDA and must be marked with the NDC00264-7800-20 identifier or equivalent approved part numbers from approved manufacturers including B. Braun Medical Inc., Trillamed LLC, and Cardinal Health. The item has a non-extendable shelf life of 24 months and must be stored at room temperature (25°C), with limited tolerance for brief exposure up to 40°C; it must be protected from freezing and excessive heat. Delivery is required within five days FOB destination with zero variance tolerated, and inspection and acceptance occur upon delivery. All packaging and labeling must conform to MIL-STD-2073-1E, and the NSN is 6505-01-331-8945. The contracting official must submit a referral in EBS to confirm bidder and manufacturer details prior to award.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 325412
New
DIBBS
NORETHINDRONE AND E
Solicitation # SPE2DP-26-T-4414
The contract specifies the procurement of Norethindrone and Ethinyl Estradiol Tablets USP, a hormonal contraceptive regulated by the FDA, in a standardized 28-tablet cycle format with three distinct active ingredient strengths: 7 tablets of 0.5 mg Norethindrone and 35 mcg Ethinyl Estradiol, 7 tablets of 0.75 mg and 35 mcg, and 7 tablets of 1 mg and 25 mcg, followed by 7 inert tablets per cycle. Each package unit consists of six 28-tablet cycles, totaling 168 tablets per package, with a required shelf life of 36 months from manufacture, ensuring no less than 31 months remain until delivery to the government. Packaging must comply strictly with Medical Marking Standard No. 1, superseding MIL-STD-129, and must be enclosed in sealed unit containers protected from damage, packed in commercial shipping containers suitable for safe transport at the lowest cost to the delivery point. The product is to be manufactured by TEVA PHARMACEUTICALS USA, INC., identified by NDC 00555-9012-58, and stored at 25°C (77°F) with allowable excursions between 15°C and 30°C. Delivery is required FOB destination within 20 days, with no tolerance for quantity variance. The contract, issued under solicitation SPE2DP-26-T-4414, references DLA’s Master List of Technical and Quality Requirements and mandates adherence to all applicable DLA packaging, marking, and logistics standards including MIL-STD-2073-1E for preparation. The contracting officer must confirm bidder and manufacturer details via EBS referral prior to award.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

NAICS: 339112
New
DIBBS
TAPE, ATHLETIC
Solicitation # SPE2DS-26-T-299M
Athletic tape, 2.75 inches wide and 30 yards long, in beige color, made with breathable foam and nonsterile, is being procured under NSN 6515-01-714-2078 with a quantity of two boxes, each containing twelve units. The product must comply with technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date based on acquisition size. Packaging must meet DLA standards, and any non-accepted supplies must have government identification removed prior to return. The solicitation, identified as SPE2DS-26-T-299M, was posted on August 2, 2026, with a response deadline of August 10, 2026, and requires delivery within twenty days after order. The purchase request is 7017609499, and the place of performance is Fort Bragg, North Carolina, under the Department of Defense’s Medical Supply Chain. The NAICS code is 339112, and the procurement is managed by the Federal agency for medical surgical supply.
Surgical and Medical Instrument Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
CUFF SET, SPHYGMOMANOME
Solicitation # SPE2DS-26-T-294Y
The contract is for the procurement of four small adult aneroid sphygmomanometer cuff sets, each fully equipped with an inflation bulb, valve, one-piece inflation tube, and a shock-resistant, gear-free, latex-free reusable cuff-mounted aneroid gauge certified to an accuracy of ±3 mm Hg with a five-year warranty. The device must withstand drops from a height of 30 inches in compliance with AAMI standards and is designed for durability and reliability in clinical use. All components are specified to meet exact technical and quality criteria outlined in the DLA Master List of Technical and Quality Requirements, with packaging governed by DLA standards and requirements for removal of government identification from non-accepted supplies. The unit of issue is each, and bidders must clearly state the source and part number being offered. The item is identified by NSN 6515-01-648-3774 under solicitation SPE2DS-26-T-294Y, issued by the Department of Defense’s Medical Supply Chain MD Surg FSF for delivery to Fort Hood, Texas, with a required delivery timeline of 20 days after order. The solicitation was posted on August 2, 2026, and responses are due by August 10, 2026. The NAICS code 339112 applies to medical equipment manufacturing, reflecting the specification and procurement intent under federal acquisition regulations. Bidders are expected to comply with all DLA packaging, identification, and technical compliance requirements as referenced in the solicitation, and no set-asides are indicated for this procurement.
Surgical and Medical Instrument Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 622110
New
DIBBS
PAPER, ELECTROCARDIO
Solicitation # SPE2DS-26-T-296Q
The contract is for the procurement of electrocardiogram recording paper, specifically a 19.6-foot roll with a red grid pattern, designated by NSN 6515-01-586-1986 and manufacturer part number 989803138171 from Philips Medical Systems. The unit of issue is the package (PG), with each package containing ten individual rolls, and the total quantity required is three packages, equivalent to thirty rolls. Delivery is required within five days to the U.S. Naval Hospital in Guam, FOB destination, with no variance allowed in quantity. The product is regulated by the FDA, and bidders must clearly indicate the country of origin and part number being supplied. All packaging must comply with commercial standards as specified in the procurement document, including sealed unit containers to prevent damage and commercial shipping containers suitable for safe transport at the lowest cost. Medical Marking Standard No. 1 supersedes MIL-STD-129 and must be followed for labeling, with copies available through DLA Troop Support. The item is intended for use with the 6515-01-582-4072 defibrillator/monitor-recorder system. Technical and quality requirements referenced in the contract are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date. The contract also includes specific transportation instructions, government-use identifiers, and procurement details tied to the solicitation number SPE2DS-26-T-296Q, with a response deadline of August 10, 2026, and an original required delivery date of August 4, 2026.
General Medical and Surgical Hospitals

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
TOURNIQUET, NONPNEUMATI
Solicitation # SPE2DS-26-T-298Z
The nonpneumatic tourniquet is a medically validated device designed to completely occlude blood flow in upper and lower extremities, verified through scientific methods at the U.S. Army Institute for Surgical Research. It features a one-handed, single-route buckle system with a reinforced windless and windless clip mechanism to ensure secure and rapid application. A reinforced stabilization plate with a beveled contact bar minimizes skin pinching, while a grey time tape and Velcro secure strap provide additional functionality and ease of use. The device is black in color with a red elliptical tip to assist users in locating and threading the strap during emergency application, and once applied, it locks in place via multiple clips for fail-safe retention. It is issued as a single unit and meets strict technical and quality standards as defined by the DLA Master List of Technical and Quality Requirements. This procurement under contract solicitation SPE2DS-26-T-298Z requires two units with delivery expected within five days of award, performed at Fort Bliss, Texas. The National Stock Number is 6515-01-521-7976 and the purchase request number is 7017693171. Bidders must clearly state the source and part number being offered. The solicitation is governed by DLA packaging requirements, applies to covered defense information, and mandates removal of government identification from non-accepted supplies. The contract falls under NAICS code 339112, is managed by the Department of Defense’s Medical Supply Chain, and the primary point of contact is Olusola Emmanuel. The solicitation was posted on August 2, 2026, with a response deadline of August 10, 2026.
Surgical and Medical Instrument Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
SHEARS, TRAUMA
Solicitation # SPE2DS-26-T-296C
The contract calls for two units of trauma shears, specifically 7.5 inch models with coyote brown handles and black titanium coated stainless steel blades featuring a blunt tip, designed for heavy-duty use. These shears are designated under NSN 6515-01-702-8905 and must be supplied with clear identification of the source and part number as required by the bidder. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision tied to the solicitation issue or award date depending on procurement scale. The item falls under packaging requirements specified by DLA and is subject to protocols for removal of government identification from non-accepted supplies. The solicitation, issued under SPE2DS-26-T-296C, was posted on August 2, 2026, with a response deadline of August 10, 2026. Delivery must be completed within 20 days after delivery order, to Fort Campbell, 42223-5000, under the Department of Defense’s Medical Supply Chain. The primary point of contact for inquiries is Dorothy Marquis, reachable via email or phone as listed.
Surgical and Medical Instrument Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
BLADE, SURGICAL PREPARA
Solicitation # SPE2DS-26-T-300K
The contract pertains to the procurement of surgical preparation blades made of carbon steel, specifically single-edge, straight, 50S type, sourced from Pilling Surgical, Inc. (part number 450205) and American Safety Razor Co. (part number 74-0001), with the unit of issue being a package (PG) of 50 blades. The item is regulated by the FDA, requiring the contracting official to submit a referral in EBS to the product specialist, including manufacturer details, part number, and bidder information. Packaging must comply with commercial standards and the Medical Marking Standard No. 1, which supersedes MIL-STD-129, with containers required to protect against damage and ensure safe delivery via common carrier at the lowest cost. All packaging and marking must meet DLA requirements, and the material is subject to Covered Defense Information provisions. The NSN is 6515-01-147-0210, with a single package quantity of 1 PG under purchase request 7017701239. Delivery is mandated within 20 days FOB destination, with no variance allowed in quantity, and inspection and acceptance occur at the delivery point. The contract is issued under solicitation SPE2DS-26-T-300K, with a response deadline of August 10, 2026, and the place of performance is WaterVliet, NY, 12189-5000. The NAICS code is 339112, and the procurement is for the Department of Defense through its Medical Supply Chain division.
Surgical and Medical Instrument Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
SPONGE, SURGICAL
Solicitation # SPE2DS-26-T-297M
The contract specifies the procurement of surgical sponges that are radiopaque, white, gauged, and sized at 4 inches by 8 inches, with ten sponges per container and a unit of issue of 800 sponges per package. These sponges are intended for use in operating rooms and must have a shelf life of 36 months from the date of manufacture, with no more than five months elapsed between manufacturing and delivery to the government. Strict labeling requirements mandate that all packaging include the manufacturer date, expiration or retest date, contract number, and lot number, in compliance with the latest revision of Medical Marking Standard No. 1, which supersedes MIL-STD-129. Packaging must be commercial grade, sealed to protect contents from damage, and shipped in suitable exterior containers that ensure safe delivery at the lowest possible freight rate to the designated delivery point in APO, 09094-3219. If the product is not stored in a climate-controlled environment for a month or longer, the shelf life counter must be halved. All products must adhere to the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, and bidders must provide the source and part number. The solicitation was issued under contract number SPE2DS-26-T-297M with a deadline for response on August 10, 2026, and requires delivery within 20 days after award.
Surgical Appliance and Supplies Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334511
New
DIBBS
CLAMP, TUBING, REGULATIN
Solicitation # SPE2DS-26-T-294F
The contract calls for 8 packages of ratcheting plastic tubing clamps, each package containing 25 units, for a total of 200 clamps. Each clamp is 4.3 inches long, non-sterile, disposable, and designed to occlude tubing with an outer diameter between 1 and 8 mm, featuring smooth jaws and finger rings for easy handling. The item is identified by NSN 6515-01-614-0551 and must be supplied with the source and part number clearly specified by the bidder. Packaging requirements mandate that each unit be sealed in a protective container to prevent damage and that all shipments be packed in commercial exterior containers suitable for safe transport via common carrier at the lowest possible rate to the delivery point at Fort Hood, Texas. All packaging and marking must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and copies of the standard are available through DLA Troop Support. The solicitation, issued under SPE2DS-26-T-294F, incorporates technical and quality requirements from the DLA Master List, and the revision in effect at the solicitation issue date controls compliance. The contract was posted on August 2, 2026, with a response deadline of August 10, 2026, and delivery must be completed within 20 days of award. The purchasing agency is the Department of Defense, Medical Supply Chain MD Surg FSF, with Michael Small as the primary point of contact.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 621410
New
DIBBS
CULTURE MEDIUM, MOTI
Solicitation # SPE2DS-26-T-297C
The contract specifies the procurement of Culture Medium for Motility Determination, identified by NSN 6550-01-732-8840, in a format of 15mm x 103mm tubes containing TTC indicator, with each package comprising twenty 5 mL units. The unit of issue is PG, and the order quantity is two PG. The item must have a shelf life of twelve months, non-extendable, with no more than one month elapsed between the date of manufacture and the date of delivery to the government. All packaging and labeling must comply with Medical Marking Standard No. 1, including clear markings for the date of manufacture, expiration or retest date, and the contract or lot number, in accordance with the latest MMS1C revision. The product requires refrigerated storage between 2 to 8 degrees Celsius and must not be frozen. Packaging must be commercial-grade, sealed, and designed to prevent damage during transit, with shipping containers chosen to ensure safe and cost-effective delivery to the specified point of performance in Williamsburg, Virginia. The item is subject to Defense Logistics Agency packaging requirements and the removal of government identification from non-accepted supplies. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with revisions effective as of the solicitation issue date. Bidders must provide the source and part number of the item being offered, and the response deadline is August 10, 2026, with delivery required within five days after order award.
Family Planning Centers

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 456199
New
DIBBS
PAPER, MEDICAL RECORDIN
Solicitation # SPE2DS-26-T-298U
The contract specifies the procurement of medical recording paper intended for use with Propaq MD and X defibrillator monitor systems, with each unit consisting of a box containing six individual sheets. The packaging must comply with commercial standards outlined in the procurement documentation, requiring each complete unit to be sealed in a container that safeguards against damage or breakage, and all units must be shipped in exterior containers suitable for safe transport by common carriers at the lowest available rate to the designated delivery point. All items must be labeled in accordance with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and bidders must reference the NSN/Part Number 6515-01-628-6597 while clearly identifying the source and part number being supplied. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Delivery is required within 20 days after order, under solicitation SPE2DS-26-T-298U, issued by the Department of Defense’s Medical Supply Chain MD Surg FSF, with performance located at Tinker AFB, Oklahoma, and primary point of contact Marc Canalichio.
All Other Health and Personal Care Retailers

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
TUBE, DRAINAGE, SURGI
Solicitation # SPE2DS-26-T-294A
The contract specifies the procurement of 4 packaging groups, each containing 10 sterile, disposable thoracic drainage tubes, totaling 40 units. Each tube is 28 FR, radiopaque, straight, and designed for surgical use, with a required shelf life of 60 months that cannot be extended. The item is identified by NSN 6515-00-763-7367 and must comply with technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, as referenced by R and I numbers. Packaging must adhere to DLA specifications, and all non-accepted supplies must have government identification removed prior to return. The contract includes provisions for covered defense information and requires bidders to clearly specify the manufacturer’s core and part numbers. The solicitation, issued under SPE2DS-26-T-294A, was posted on August 2, 2026, with responses due by August 10, 2026. Delivery is due within 20 days of award, with performance located at Fort Hood, Texas. The procurement falls under NAICS code 339112 and is managed by the Department of Defense’s Medical Supply Chain, with Chandler Alvarez as the point of contact.
Surgical and Medical Instrument Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
BANDAGE, ADHESIVE
Solicitation # SPE2DS-26-T-299S
The contract solicits adhesive bandages specified as BANDAID 1 inch by 3 inches flesh sterile and elastic adhesive bandages with a central gauze pad, with a unit of issue of a package containing 100 each. The National Stock Number is 6510-00-761-5062, and the quantity required is three packages, to be delivered within 20 days of award to Fort Bliss, Texas, with the delivery address ending in 79918-2527. All medical acquisitions under this solicitation must comply with commercial packaging standards, requiring each unit to be sealed in a container that protects against damage and breakage, and all exterior shipping containers must ensure safe, cost-effective delivery via common carrier. Marking must adhere to Medical Marking Standard No. 1, superseding MIL-STD-129, with copies available through DLA Troop Support or their website. Bidders must specify the source and part number being supplied to ensure compliance with the technical and quality requirements referenced through the DLA Master List of Technical and Quality Requirements, where revisions effective on the solicitation issue date or award date govern. The solicitation, identified as SPE2DS-26-T-299S, was posted on August 2, 2026, with a response deadline of August 10, 2026, under NAICS code 339113, managed by the Department of Defense’s Medical Supply Chain, with Tiffany Parker as the primary point of contact.
Surgical Appliance and Supplies Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details