This Solicitation opportunity from Department Of Defense was posted on July 16, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
ANTENNA
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
AI Contract Overview
The contract pertains to the procurement of a CRPA-GPS Upper Antenna identified by NSN 5985-01-263-0355, with a firm fixed price and a quantity of ten units. Delivery is required within 388 days after award, with acceptance and inspection occurring at the destination facility in New Cumberland, Pennsylvania. The supplier must comply with stringent technical and quality requirements from the DLA Master List of Technical and Quality Requirements, which supersede any commercial standards such as ASTM D3951. The part must be top-coated by the manufacturer prior to delivery, in accordance with Drawing 16VE356 Note 6, which has been revised to remove reference to General Dynamics/Fort Worth Division’s involvement. The item is designated as a Critical Application Item and requires compliance with CMMC Level 2 Cybersecurity Self-Assessment standards. Packaging must adhere to DLA-specific protocols, including MIL-STD-129 labeling and RP001 palletization guidelines, with hazardous material handling governed by FED-STD-313 and IP025 if applicable. The supplier must also ensure proper unit of issue alignment with DoD standards and remove all government identification from non-accepted supplies. Technical data referenced is incomplete, but the delivered item must fully meet all cited specifications and part number requirements. All documentation, including source approval requests and cybersecurity assurances, must be submitted as required.
General Info
Agency
NAICS
Place of Performance
2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USASet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
RD002, COVERED DEFENSE INFORMATION APPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
NOT ESD SENSITIVE CRPA-GPS UPPER ANTENNA G.D. SPEC CONTROL DRAWING
This part must be top coated prior to receipt by DLA. The topcoat is required to be applied by the MANUFACTURER. Drawing 16VE356 NOTE 6 is being changed to reflect this requirement by the design control authority for the drawing. Until the drawing is completed the manufacturer must still apply the topcoat. Note 6 where it states "Except step C, which will be accomplished by General Dynamics/Fort Worth Division" is being removed AND NO LONGER APPLIES.
THE TECHNICAL DATA CITED IN THIS SOLICITATION IS NOT COMPLETE, HOWEVER, THE ITEM PROVIDED MUST MEET THE REQUIREMENTS OF THE CITED TECHNICAL DATA IN ADDITION TO THE REQUIREMENTS OF THE PART NUMBERED ITEM LISTED ON THIS SOLICITATION.
CRITICAL APPLICATION ITEM
BALL AEROSPACE & TECHNOLOGIES CORP. 0ESR2 P/N 300615-500
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT.
0001 5985-01-263-0355 10.000 EA $ _______________ $ _______________
ANTENNA
PRICING TERMS: Firm Fixed Price
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
SPE7M5-26-Q-0704
SECTION B
SUPPLY/SERVICE: 5985-01-263-0355 CONT'D
ACCEPTANCE POINT: DESTINATION
FOB: ORIGIN DELIVERY DATE: 388 DAYS ADO
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND
CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
GOVT USE
External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date. 0001 7017235823 0001 N/A N/A N/A 02/06/2028
SPE7M5-26-Q-0704 NSN/Part Number: 5985-01-263-0355 Quantity: 10 EA Purchase Request: 7017235823QTY: 10 Delivery: 388 days ADO
More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION
Same awarding agency