This Solicitation opportunity from Department Of Defense was posted on May 14, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

APPLICATOR, DISPOSAB

Closed

SPE2DS-26-T-074TFederal

Submission Closed05/20/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 339113

New

DIBBS

NEEDLE, HYPODERMICThe contract pertains to the procurement of hypodermic needles identified by the National Stock Number 6515-01-562-0759, with a total quantity requested of four units. The solicitation, issued by the Defense Logistics Agency under the Department of Defense, was posted on June 15, 2026, and has a response deadline of June 22, 2026. This is a federal solicitation for supplying medical needles, likely to support defense-related medical operations or inventories. Details such as the specific office address, place of performance, and contact information were not provided in the contract data. The contract is categorized under a solicitation type without any specified set-aside or NAICS code. The contracting opportunity was made publicly accessible through the Defense Logistics Agency’s online portal, allowing qualified suppliers to respond within the stipulated timeframe.

Defense Logistics Agency

POSTED

DEADLINE

TENSIOMETERThe contract involves the procurement of a single tensiometer, identified by the NSN/Part Number 6635-00-530-1130, under Purchase Request 7017077584. The solicitation, titled "TENSIOMETER," was issued by the Defense Logistics Agency, part of the Department of Defense, with the solicitation number SPE4A5-26-T-239J. The opportunity was posted on June 15, 2026, and responses were due by June 23, 2026. This procurement is classified as a federal solicitation, though there is no specified set-aside category or applicable NAICS code. The contract details indicate the procurement is managed by a federal agency without specific office or performance location information disclosed. The contract is part of the Department of Defense's efforts to acquire necessary equipment, ensuring timely response and compliance with federal solicitation procedures. Although direct points of contact and physical addresses are not provided, interested parties are directed to the Defense Logistics Agency's online portal for more information and submission of proposals.

Defense Logistics Agency

POSTED

DEADLINE

SUTURE, NONABSORBABLThe contract involves the procurement of nonabsorbable sutures, identified by the national stock number 6515-01-613-4307, with a total quantity requested of two units. This solicitation, numbered SPE2DS-26-T-153J, was issued by the Defense Logistics Agency under the Department of Defense. The request was posted on June 15, 2026, with a response deadline set for June 22, 2026. The contract is a solicitation type with no specific set-aside status or NAICS code indicated, and is intended for federal organization use. The place of performance and office address details are unspecified beyond the agency and organization names. The procurement process is conducted through the Defense Logistics Agency, ensuring compliance with government acquisition procedures. Further information and response submission can be accessed via the linked Defense Logistics Agency bidding system.

Defense Logistics Agency

POSTED

DEADLINE

TRAINING AID, PROSTHThe contract pertains to the procurement of a single unit of a training aid for prosthetics, identified by the national stock number 6910-01-656-5343. This solicitation, issued by the Defense Logistics Agency under the Department of Defense, is designated as SPE2DH-26-T-4563 and was posted on June 15, 2026, with a response deadline of June 22, 2026. The contract type is a solicitation without any specified set-aside provisions or NAICS code. The purchase request number associated with this procurement is 7017156114, indicating the formal request for acquisition. The place of performance and precise office location details are not specified, and no contact information is provided. This acquisition is federally organized, emphasizing its role within the Department of Defense's logistics and supply chain efforts. The solicitation and related documents can be accessed through the Defense Logistics Agency’s bidding system online.

Defense Logistics Agency

POSTED

DEADLINE

RESUSCITATION KIT, MThe contract involves the procurement of a single resuscitation kit, designated as "RESUSCITATION KIT, M" with the National Stock Number 6515-01-513-9276. This solicitation, identified by the number SPE2DS-26-T-153V, was issued by the Defense Logistics Agency under the Department of Defense. The request was officially posted on June 15, 2026, with a deadline for response set a week later on June 22, 2026. The contract appears to be a straightforward procurement without any specific set-aside provisions or designated types of organizations for eligibility. The place of performance and point of contact details are unspecified, indicating either a flexible delivery location or pending contract award details. The solicitation is publicly available through the Defense Logistics Agency's DIBBS platform, ensuring transparency in the procurement process. This contract primarily focuses on acquiring essential medical equipment to support defense-related operational needs.

Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 6 days

AI Contract Overview

The contract covers the procurement of sterile, disposable 6-inch wooden rod applicators intended for medical use, with specific emphasis on packaging and handling requirements. Each applicator unit must be securely packaged in sealed containers that protect against damage during shipping, complying with commercial packaging standards as specified in the procurement documents. The exterior shipping containers must meet commercial requirements to ensure safe and cost-effective delivery to the designated destination, Cannon Air Force Base, within 20 days of order placement. The contract strictly prohibits the intentional inclusion of mercury or mercury compounds in the product unless used in specialized applications such as batteries or sensors, aligning with DoD and NAVSEA environmental safety standards. The devices are regulated by the FDA, requiring proper identification and referral to product specialists for confirmation during the procurement process. The items are sourced from approved manufacturers including Redi Products, Medline Industries, and McKesson Medical-Surgical Inc., with bidders required to specify the company and part number they supply. Inspection and acceptance will occur at the destination, with no quantity variance allowed. This solicitation is managed by the Department of Defense's Medical Supply Chain MD Surgical FSF, with all technical and quality standards governed by the DLA Master List of Technical and Quality Requirements. Detailed marking must follow Medical Marking Standard No. 1, superseding prior military standards, ensuring compliance with current federal regulations.

General Info

Procurement of sterile 6-inch wooden rod applicators, strict packaging, FDA regulation, no mercury, 20-day delivery.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

NAICS

339113 - Surgical Appliance and Supplies Manufacturing View NAICS

Place of Performance

224 W D L INGRAM BLVD BLDG 1408, CANNON AFB, NM, 88101-5009, US

Set-Aside

NONE

Documents

(1)

SPE2DS-26-T-074T.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedMay 14

Solicitation

Response DeadlineMay 20

Deadline has passed

Submission Closed

05/20/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Contacts1 person available

OfficeUS

Organization / Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Office AddressUS

Contacts

Michael Small

contact@example.gov

+1 (555) 000-0000

Full Description

APPLICATOR,DISPOSAB
APPLICATOR, DISPOSABLE, 6 INCHES LONG, WOOD ROD,
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
ABSORBENT TIP, STERILE, DISPOSABLE, 2/PACKET, 100
PACKETS, 200S
.
UNIT OF ISSUE PACKAGE (PG)
.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
SPE2DS-26-T-074T
SECTION B
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
This device or drug is regulated by the FDA. Note to Buyers: The contracting official shall send a referral in EBS to the product specialist for confirmation. Please include bidder name and bidder contact information, manufacturer name, manufacturer part number, and item description. . THIS IS A STERILE ITEM. . SOURCE: REDI PRODUCTS, INC. (CAGE 22972) PART NO. 36737 or Medline Industries Inc (CAGE 0PMN3) PART NO. MDS202000Z . FLEET PRIME VENDOR ITEM . BIDDER SHALL SPECIFY CO. AND P/N BEING SUPPLIED. . .
.
MCKESSON MEDICAL-SURGICAL INC. 7K139 P/N 36767 MEDLINE INDUSTRIES, LP 0PMN3 P/N MDS202000Z REDI PRODUCTS DIV OF GENERAL 22972 P/N 36737
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016781147 0001 PG 1.000
NSN/MATERIAL:6515005648242
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
SPECIAL NSN/Part Number: 6515-00-564-8242 Quantity: 1 PG Purchase Request: 7016781147QTY: 1 Delivery: 20 days ADO