This Solicitation opportunity from Department Of Defense was posted on July 28, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
APPLICATOR, DISPOSABLE
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
The contract specifies the procurement of a disposable applicator with an overall maximum length of 4.000 inches and a nominal shaft diameter of 0.200 inches, featuring a round tip and either a rayon or cotton head impregnated with povidone-iodine. Each unit must be individually sealed in a protective container to prevent damage or breakage and packed in commercial shipping containers suitable for safe delivery via common carrier at the lowest cost to the designated delivery point. Packaging and marking must comply fully with Medical Marking Standard No. 1, which supersedes all references to MIL-STD-129, and the exact requirements and guidance for this standard are available through DLA Troop Support. The unit of issue is a package containing 75 units, and the product is classified as a Class I medical device under FDA regulation 880.6025, requiring registration, listing, labeling, and GMP compliance even though a 510(k) is not needed. Only approved manufacturers—Medline Industries LP, Cardinal Health 200, LLC, and NICE-PAK Products Inc.—with their designated part numbers are eligible. The NSN is 6515-01-316-9295, with a fixed quantity of one package required, delivering 20 days after award, FOB destination, with zero tolerance for quantity variance. Inspection and acceptance occur at the destination, and government identification must be removed from rejected items. The solicitation is issued under SPE2DS-26-T-276S with a response deadline of August 3, 2026, and procurement is governed by DLA’s Master List of Technical and Quality Requirements.
General Info
Agency
NAICS
Place of Performance
5234 EAGLE TALON DR BLDG X3063, FORT BRAGG, NC, 28310, USASet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
APPLICATOR, DISPOSABLE, OVER ALL LENGTH 4.000 INCHES MAXIMUM, SHAFT
DIAMETER 0.200 INCHES NOMINAL, ROUND TIP, RAYON HEAD OR COTTON HEAD
W/PROVIDONE-IODINE.
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
UNIT OF ISSUE: PACKAGE (PG) 1 PG = 75 EA
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
BIDDER: PLEASE SPECIFY SOURCE AND PART
NUMBER BEING SUPPLIED.
This device or drug is regulated by the FDA. Note to Buyers: The contracting official shall send a referral in EBS to the product specialist for confirmation. Please include bidder name and bidder contact information, manufacturer name, manufacturer part number, and item description. REGULATION 880.6025 CLASS I
SPE2DS-26-T-276S
SECTION B
EVEN THOUGH A 510(K) IS NOT REQUIRED, IT IS NECESSARY TO
MEET OTHER REQUIREMENTS FOR MARKETING. THESE INCLUDE:
REGISTRATION AND LISTING, LABELING OR GMP'S.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
MEPSEP ITEM, NO SUBSTITUTION
SHALL BE MARKED IAW THE LATEST EDITION OF
THE MEDICAL MARKING STANDARD NO. 1.
MMS NO. 1 IS AVAILABLE ONLINE AT:
https://www.dla.mil/Logistics-Operations/Packaging/
MEDLINE INDUSTRIES, LP 0PMN3 P/N MDS093902ZZ CARDINAL HEALTH 200, LLC 07TA6 P/N 40000-050 NICE-PAK PRODUCTS INC. 3YUB7 P/N S41125
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017631916 0001 PG 1.000
NSN/MATERIAL:6515013169295
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
SPECIAL NSN/Part Number: 6515-01-316-9295 Quantity: 1 PG Purchase Request: 7017631916QTY: 1 Delivery: 20 days ADO
More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Same awarding agency
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 650+ contractors already using CLEATUS