This Solicitation opportunity from Department Of Defense was posted on May 17, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
APPLICATOR, SILVER N
Closed
SPE2DP-26-T-3421FederalSubmission Closed
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
Show more
The contract calls for the procurement of silver nitrate applicators, each containing a mixture of 75% silver nitrate and 25% potassium nitrate fused to one end, measuring six inches in length. These applicators are for topical use (Rx only) and are packaged in containers holding 100 units with a total shelf life of 24 months, requiring a minimum of 21 months remaining at the time of government receipt. Packaging must comply with DLA's commercial packaging standards, including Medical Marking Standard No. 1, and provide adequate protection during shipment. The contract also stresses compliance with FDA regulations and requires suppliers to submit Safety Data Sheets (SDS) and proper hazardous material labels per OSHA’s updated Hazard Communication Standards. Delivery is set FOB destination within 20 days of order, with strict packaging and marking guidelines to ensure safe transport and acceptance. The contract specifies that hazardous materials be packaged in accordance with Federal Standard 313 and DLA technical quality requirements, superseding ASTM standards where applicable. The contract is managed by the Defense Logistics Agency (DLA) under solicitation SPE2DP-26-T-3421, for a quantity of one container, with compliance monitoring including inspection and acceptance at destination. The purchase supports medical supply operations, under the Department of Defense Medical Supply Chain Pharmacy FSA, with key contacts and references provided for enforcement of technical and safety standards.
General Info
Procure 100 silver nitrate applicators, 6-inch, 75% silver nitrate, FDA-compliant, 20-day delivery.
Agency
Department Of Defense → MEDICAL SUPPLY CHAIN PHARM FSA
NAICS
325412 - Pharmaceutical Preparation Manufacturing View NAICS
Place of Performance
UNIT 100174 BOX 1, FPO, AP, 96678, USSet-Aside
NONE
Timeline
PhaseClosed
Submission Closed
Organization & Contact Information
Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN PHARM FSA
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN PHARM FSA
Office AddressUS
Contacts
Full Description
Show more
APPLICATOR,SILVER N
APPLICATOR, SILVER NITRATE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
. RX ONLY, FOR TOPICAL USE. EACH APPLICATOR CONSISTS OF A MIXTURE OF
75% SILVTER NITRATE AND 25% POTASSIUM NITRATE FUSED TO ONE END THAT
MEASURES 6 INCHES OR 1.524 CENTIMETERS (CM).. UNIT OF ISSUE IS A
CONTAINER CONTAINING 100 EACH (APPLICATORS).. TOTAL SHELF LIFE IS 24
MONTHS.. THERE SHALL BE A MINIMUM OF 21 MONTHS OF REMAINING SHELF LIFE
AT THE TIME OF RECEIPT BY THE FIRST GOVERNMENT ACTIVITY.. STORE IN THE
CLOSED PACKAGE AT ROOM TEMPERATURE IN A DRY PLACE AND PROTECT FROM
LIGHT. LABELING AND MARKING MUST IN ACCORDANCE WITH MEDICAL MARKING
STANDARD NO. 1C. 2/10/2016..
This device or drug is regulated by the FDA. Note to Buyers: The contracting official shall send a referral in EBS to the product specialist for confirmation. Please include bidder name and bidder contact information, manufacturer name, manufacturer part number, and item description.
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED IN A SUITABLE SEALED UNIT CONTAINER CAPABLE OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT THE LOWEST RATE, TO POINT OF DELIVERY CALLED FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1 (MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
SPE2DP-26-T-3421
SECTION B
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
Hazard Communication Standard Notice:
Effective June 1, 2015, Federal Standard No. 313-E, Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities, establishes the requirement for preparation and submission of Safety Data Sheets (SDS) in lieu of Material Safety Data Sheets (MSDS) by suppliers who provide hazardous materials to government activities.
The Occupational Safety and Health Administration (OSHA) has modified its Hazard Communication Standard (HCS) to conform to the United Nations Globally Harmonized System of Classification and Labeling of Chemicals. As a result of this change, GSA revised Federal Standard No. 313-E requiring Safety Data Sheets for classifying chemicals and communicating the applicable information on labels.
In accordance with the revised standard after June 1, 2015:
1. Suppliers will be required to submit, to the contracting officer for review and approval prior to award, safety data sheets consistent with the requirements found at 29 C.F.R. 1910.1200 for hazardous materials delivered to the Government.
2. Suppliers will also be required to submit, to the contracting officer for review and approval prior to award, Hazardous Communication Standard (HCS) labels in accordance with 29 C.F.R. 1910.1200 requirements or current Consumer Product Safety Act (CPSA), Federal Hazardous Substance Act (FHSA) labels when subject to labeling requirements under those statutes. This product labeling is required for hazardous materials delivered to the Government.
3. Finally, suppliers must train their employees on the new safety data sheets, hazardous communication labels, and requirements of 29 C.F.R. 1910.1200.
For more information on SDS, refer to OSHAs website, available at:
https://www.osha.gov/law-regs.html
For information on 29 C.F.R. 1910.1200, refer to the below link:
https://www.osha.gov/dsg/hazcom/index.html
1 CO = 100 EA RS016: Shelf-life requirement RS001 for a TYPE I (CODE M) item with a shelf life of 24 months (non-extendable) applies to this item.
. SHALL BE MARKED IAW THE LATEST EDITION OF THE MEDICAL MARKING STANDARD NO. 1. MMS NO. 1 IS AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
MEDLINE INDUSTRIES, LP 0PMN3 P/N GHF1590Z GF HEALTH PRODUCTS, INC. 3HE02 P/N NDC12165-0100-01 MCKESSON MEDICAL-SURGICAL INC. 7K139 P/N 28119
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE2DP-26-T-3421
SECTION B
PR: 7016795320 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016795320 0001 CO 1.000
NSN/MATERIAL:6505002999672
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
R21825
USS STETHEM DDG 63
UNIT 100174 BOX 1
FPO AP 96678
US
VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
R21825
USS STETHEM DDG 63
DLA VENDORS: USE VSM FOR
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
M/F: (TCN) R218256133HM56
RDD: 777
PROJ: EP5 TP 2
SUPP ADD: YNHM01 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 07
SPE2DP-26-T-3421
SECTION B
PR: 7016795320 PRLI: 0001 CONT’D
DIC: A4A DIST: 9B ADV: 2A FC: N7
Need Ship Date:00/00/0000 Original Required Delivery Date:05/19/2026
SPE2DP-26-T-3421 NSN/Part Number: 6505-00-299-9672 Quantity: 1 CO Purchase Request: 7016795320QTY: 1 Delivery: 20 days ADO
APPLICATOR, SILVER NITRATE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
. RX ONLY, FOR TOPICAL USE. EACH APPLICATOR CONSISTS OF A MIXTURE OF
75% SILVTER NITRATE AND 25% POTASSIUM NITRATE FUSED TO ONE END THAT
MEASURES 6 INCHES OR 1.524 CENTIMETERS (CM).. UNIT OF ISSUE IS A
CONTAINER CONTAINING 100 EACH (APPLICATORS).. TOTAL SHELF LIFE IS 24
MONTHS.. THERE SHALL BE A MINIMUM OF 21 MONTHS OF REMAINING SHELF LIFE
AT THE TIME OF RECEIPT BY THE FIRST GOVERNMENT ACTIVITY.. STORE IN THE
CLOSED PACKAGE AT ROOM TEMPERATURE IN A DRY PLACE AND PROTECT FROM
LIGHT. LABELING AND MARKING MUST IN ACCORDANCE WITH MEDICAL MARKING
STANDARD NO. 1C. 2/10/2016..
This device or drug is regulated by the FDA. Note to Buyers: The contracting official shall send a referral in EBS to the product specialist for confirmation. Please include bidder name and bidder contact information, manufacturer name, manufacturer part number, and item description.
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED IN A SUITABLE SEALED UNIT CONTAINER CAPABLE OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT THE LOWEST RATE, TO POINT OF DELIVERY CALLED FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1 (MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
SPE2DP-26-T-3421
SECTION B
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
Hazard Communication Standard Notice:
Effective June 1, 2015, Federal Standard No. 313-E, Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities, establishes the requirement for preparation and submission of Safety Data Sheets (SDS) in lieu of Material Safety Data Sheets (MSDS) by suppliers who provide hazardous materials to government activities.
The Occupational Safety and Health Administration (OSHA) has modified its Hazard Communication Standard (HCS) to conform to the United Nations Globally Harmonized System of Classification and Labeling of Chemicals. As a result of this change, GSA revised Federal Standard No. 313-E requiring Safety Data Sheets for classifying chemicals and communicating the applicable information on labels.
In accordance with the revised standard after June 1, 2015:
1. Suppliers will be required to submit, to the contracting officer for review and approval prior to award, safety data sheets consistent with the requirements found at 29 C.F.R. 1910.1200 for hazardous materials delivered to the Government.
2. Suppliers will also be required to submit, to the contracting officer for review and approval prior to award, Hazardous Communication Standard (HCS) labels in accordance with 29 C.F.R. 1910.1200 requirements or current Consumer Product Safety Act (CPSA), Federal Hazardous Substance Act (FHSA) labels when subject to labeling requirements under those statutes. This product labeling is required for hazardous materials delivered to the Government.
3. Finally, suppliers must train their employees on the new safety data sheets, hazardous communication labels, and requirements of 29 C.F.R. 1910.1200.
For more information on SDS, refer to OSHAs website, available at:
https://www.osha.gov/law-regs.html
For information on 29 C.F.R. 1910.1200, refer to the below link:
https://www.osha.gov/dsg/hazcom/index.html
1 CO = 100 EA RS016: Shelf-life requirement RS001 for a TYPE I (CODE M) item with a shelf life of 24 months (non-extendable) applies to this item.
. SHALL BE MARKED IAW THE LATEST EDITION OF THE MEDICAL MARKING STANDARD NO. 1. MMS NO. 1 IS AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
MEDLINE INDUSTRIES, LP 0PMN3 P/N GHF1590Z GF HEALTH PRODUCTS, INC. 3HE02 P/N NDC12165-0100-01 MCKESSON MEDICAL-SURGICAL INC. 7K139 P/N 28119
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE2DP-26-T-3421
SECTION B
PR: 7016795320 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016795320 0001 CO 1.000
NSN/MATERIAL:6505002999672
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
R21825
USS STETHEM DDG 63
UNIT 100174 BOX 1
FPO AP 96678
US
VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
R21825
USS STETHEM DDG 63
DLA VENDORS: USE VSM FOR
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
M/F: (TCN) R218256133HM56
RDD: 777
PROJ: EP5 TP 2
SUPP ADD: YNHM01 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 07
SPE2DP-26-T-3421
SECTION B
PR: 7016795320 PRLI: 0001 CONT’D
DIC: A4A DIST: 9B ADV: 2A FC: N7
Need Ship Date:00/00/0000 Original Required Delivery Date:05/19/2026
SPE2DP-26-T-3421 NSN/Part Number: 6505-00-299-9672 Quantity: 1 CO Purchase Request: 7016795320QTY: 1 Delivery: 20 days ADO