Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Armament Control Unit (ACU) Evaluation and Failure Mode Analysis

Active

Federal

Response Deadline08/27/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, titled Armament Control Unit (ACU) Evaluation and Failure Mode Analysis, is issued by the Department of Defense through DLA Aviation At Huntsville. The project requires the technical evaluation of 12 Armament Control Units, specifically part number 13225434, to identify the root cause of failure and provide recommended corrective actions. The scope of work includes performing diagnostics, testing, and detailed reporting. The contract is designated as an 8(a) Sole Source set-aside under NAICS code 334511. Performance of the work will take place in Fort Walton Beach, Florida. The solicitation was posted on August 17, 2026, with a response deadline of August 27, 2026.

General Info

DoD contract for technical evaluation and failure analysis of 12 Armament Control Units.

Agency

Department Of Defense → Al DLA Aviation At HuntsvilleView Agency

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument ManufacturingView NAICS

Place of Performance

Fort Walton Beach, FL, 32548, USA

Set-Aside

8A

Documents

This scope was carved out of SPRRA2-26-Q-SP03-RFP.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

ACU & UACU Repair, Sole Source to On-Point Defense Technologies

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 17

subcontract

Response DeadlineAug 27

Submission deadline

Response Deadline

08/27/2026, 09:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Al DLA Aviation At Huntsville

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Al DLA Aviation At Huntsville

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Perform technical evaluation of 12 Armament Control Units (PN 13225434) to determine root cause of failure and recommend corrective actions, including diagnostics, testing, and reporting.

Similar Contracts

Same NAICS industry code

SHAFT ASSEMBLY, INDI

Solicitation # SPE7M4-26-T-345J

Solicitation SPE7M4-26-T-345J, issued by the Department of Defense DLA Land and Maritime Fluid Handling Division, is for the procurement of four shaft assemblies (NSN 6610010472394) for delivery to Hill Air Force Base, Utah. The contract specifies a need ship date of February 12, 2027, with a final required delivery date of April 24, 2027, or 167 days after the date of award. The total estimated value is 16.00 dollars, based on a unit price of 4.00 dollars. Delivery is FOB Destination, with both inspection and acceptance occurring at the destination point. The contractor must adhere to strict quality and packaging standards, including ASTM D3951 and MIL-STD-129 for marking and labeling, with the DLA Master List of Technical and Quality Requirements taking precedence. Quality assurance sampling shall follow MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance. Key regulatory requirements include a CMMC Level 2 self-assessment for cybersecurity, compliance with NIST SP 800-171, and adherence to OSHA hazard communication standards for labeling. Invoicing must be processed electronically through the Wide Area WorkFlow system.

FLUID HANDLING DIVISION

POSTED

about 10 hours ago

DEADLINE

INTRODUCER, ENDOTRACHEA

Solicitation # SPE2DS-26-T-349A

This contract is for the procurement of disposable, sterile, single-use endotracheal tube introducers (bougies) for adults. The devices feature a coude-tip, are graduated, 15 FR in size, and 70 cm in length, designed for use with endotracheal tubes ranging from 6.0 mm to 11 mm. The items are made from medical grade plastic and are issued in packages of 10 units each. The order consists of 7 packages under purchase request 7017906777, with a delivery requirement of 20 days after the order. A critical requirement is a 60-month non-extendable shelf life, with no more than 9 months elapsed from the date of manufacture to the date of delivery to the government. All supplies must adhere to DLA packaging requirements and specific labeling standards, including the manufacturer date, expiration date, and contract or lot number.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 10 hours ago

DEADLINE

CUFF KIT, SPHYGMOMANOME

Solicitation # SPE2DS-26-T-349D

This contract is for the procurement of Sphygmomanometer Cuff Kits, specifically the System 5 Multicuff, which includes infant, child, adult, large adult, and thigh cuffs. The requirement is split across three line items totaling 11 units, with deliveries destined for Peterson AFB in Colorado and Little Rock AFB in Arkansas. The items are regulated by the FDA and must be provided by authorized manufacturers such as Cardinal Health or American Diagnostics Co. Delivery is required within 20 days, with required delivery dates set for August 2026. Packaging must adhere to ASTM D3951 and DLA packaging requirements, ensuring each unit is in a sealed container to prevent damage. All materials must be marked according to Medical Marking Standard No. 1 and shipped via traceable means. Inspection and acceptance will take place at the destination.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 10 hours ago

DEADLINE

ELECTRODE, ELECTROCARDI

Solicitation # SPE2DS-26-T-347N

This contract is for the procurement of disposable adult electrocardiograph electrodes designed for use with defibrillator/monitor-recorder systems. These round, radiolucent electrodes feature a nominal diameter of 2.000 inches, high-tack foam, wet gel, and silver/silver chloride sensors. They serve as replacement components for NSNs 6515-01-582-4060 and 6515-01-582-4072. The order consists of one package containing 300 electrodes, organized as 60 packages of 5 electrodes each. The delivery requirement is 20 days after receipt of order. Bidders must specify the source and part number being supplied and adhere to DLA packaging requirements and technical quality standards. The solicitation is managed by the Department of Defense Medical Supply Chain.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 10 hours ago

DEADLINE

ADAPTER, GOGGLES, NIG

Solicitation # SPE4A7-26-T-668K

This contract is for the procurement of one night vision goggle adapter, part number ANV-126-701 by Hoffman Engineering, LLC, under solicitation SPE4A7-26-T-668K. The order is issued by the Department of Defense and requires delivery to Camp Lejeune, North Carolina, within 20 days after receipt of the order. The contract specifies a zero percent quantity variance and designates the destination as the point for both inspection and acceptance. Compliance requirements include CMMC Level 2 self-assessment and adherence to DLA master technical and quality requirements. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, with specific instructions for kit preservation and the use of traceable shipping methods. Quality assurance will be conducted using MIL-STD-1916 or ASQ H1331 sampling methods, with a requirement for zero non-conformances in the sample lot.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 10 hours ago

DEADLINE

GYRO-OPTICS ASSEMBLY

Solicitation # SPE4A6-26-Q-1327

This contract is for the procurement of 48 units of Gyro-Optics Assembly, identified by NSN 1420-01-686-9216, with a delivery timeline of 457 days after receipt of order. The solicitation is issued by the Department of Defense through the ASC Commodities Division. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging, marking, and sampling standards such as MIL-STD-1916 or ASQ H1331. It includes rigorous security and compliance mandates, specifically requiring CMMC Level 2 certification and the protection of covered defense information. Furthermore, the technical data is subject to ITAR and EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specialized training to access the data.

ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

APPLICATOR, DISPOSABLE

Solicitation # SPE2DS-26-T-347V

This contract is a solicitation from the Department of Defense Medical Supply Chain for the procurement of one box of disposable, sterile, cotton-tipped applicators. Each applicator is six inches long with a wooden shaft and cotton tips at both ends. The items are packaged with two applicators per sterile packet, with 100 packets per box, totaling 200 units per box. The delivery is required within 20 days after the order is placed for performance at Fort Bragg. The supplies must adhere to specific DLA technical, quality, and packaging requirements, including the removal of government identification from non-accepted supplies. The product must have a shelf life of 60 months, and no more than nine months may have elapsed from the date of manufacture to the date of delivery. Bidders are required to specify the source and part number being supplied.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 10 hours ago

DEADLINE

Supply of Allen-Bradley ControlLogix 5590 ControllersThis subcontract involves the procurement and delivery of two new Allen-Bradley 1756-L905TS ControlLogix 5590 Controllers for the NASA Shared Services Center. These components are required to replace end-of-life hardware within the Air Dispatch control system to ensure continued operational stability. The project is designated as a total Small Business Set Aside under NAICS code 334511. Performance of the contract will take place in Hampton, Virginia, with a response deadline set for August 21, 2026.

NASA Shared Services Center

POSTED

about 15 hours ago

DEADLINE

Scientific Equipment Installation and CalibrationThis subcontract opportunity with the Department of Commerce NOAA involves the installation, integration, and calibration of specialized oceanographic and fisheries research equipment. The scope of work specifically includes the setup of sonar, CTD sensors, and trawl monitoring systems on NOAA vessels to support scientific operations. The project is designated as a total Small Business Set Aside under NAICS code 334511. Interested parties must submit their responses by August 31, 2026, following the posting date of August 17, 2026.

Department Of Commerce Noaa

POSTED

about 15 hours ago

DEADLINE

Sensor & Data Acquisition Interface DevelopmentThe NASA Shared Services Center is seeking a subcontractor for the Sensor and Data Acquisition Interface Development project. This initiative focuses on the design and implementation of specialized sensor interfaces, specifically for thermocouples and strain gauges, capable of operating under extreme temperature conditions while integrating seamlessly with the test frame's data acquisition system. The project is categorized under NAICS code 334511 and will be performed in Cleveland, Ohio. Interested parties must note the brief response window, with the solicitation posted on August 17, 2026, and the deadline for responses set for August 19, 2026.

NASA Shared Services Center

POSTED

about 15 hours ago

DEADLINE

Mobile Marksmanship Training Simulator Hardware SupplyThis subcontract opportunity involves the supply of mobile, customizable marksmanship training simulators for military use at Luke Air Force Base. The hardware must feature a modular design and integration capabilities to support specialized training requirements. This project is managed by the Department of Defense under the agency FA4887 56 Cons Cc. The contract is designated as a total small business set aside under NAICS code 334511. Interested parties must submit their responses by the deadline of August 24, 2026. Performance of the contract will take place at Luke Air Force Base in Arizona.

FA4887 56 Cons Cc

POSTED

about 15 hours ago

DEADLINE

Aircraft Avionics Repair and Overhaul ServicesThis subcontract through the Department of Homeland Security's Aviation Logistics Center involves the comprehensive repair, testing, and overhaul of Integrated Engine Display Systems, specifically part number 160M042-3, for HC-144 aircraft. The scope of work includes detailed troubleshooting, the replacement of necessary components, and rigorous functional testing to ensure all systems meet original equipment manufacturer specifications. The opportunity was posted on August 17, 2026, with a response deadline of August 21, 2026. Classified under NAICS code 334511, the contract focuses on specialized aircraft avionics services to maintain the operational readiness of the designated engine display systems.

Aviation Logistics Center (ALC)(00038)

POSTED

about 15 hours ago

DEADLINE

More opportunities from Department Of Defense → Al DLA Aviation At Huntsville

Same awarding agency

Small Business Subcontracting & Socioeconomic ParticipationThe Department of Defense, through Al DLA Aviation At Huntsville, is seeking certified small businesses to serve as subcontractors or suppliers. This opportunity is specifically open to socioeconomic categories including 8(a), SDVOSB, WOSB, and HUBZone certified entities to provide support across technical, manufacturing, and logistics roles under NAICS code 335999. Interested parties must act quickly as the response deadline is August 20, 2026, following the posting date of August 17, 2026. This subcontracting initiative aims to increase socioeconomic participation within the agency's operational requirements.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 15 hours ago

DEADLINE

Defense Packaging, Preservation & ShippingThis subcontract, titled Defense Packaging, Preservation and Shipping, involves the preservation, ESD-safe packaging, and secure domestic shipping of sensitive electrical assemblies to Redstone Arsenal. The work must be performed in strict compliance with military logistics standards to ensure the integrity of the components during transport. The project is managed by the Department of Defense through the DLA Aviation office in Huntsville, falling under NAICS code 484220. Interested parties must respond by August 20, 2026, following the posting date of August 17, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 15 hours ago

DEADLINE

Ultra-Precision Testing & Inspection ServicesThe Ultra-Precision Testing and Inspection Services subcontract, issued by the Department of Defense through Al DLA Aviation At Huntsville, focuses on the independent verification and validation of cable assemblies. The primary objective is to utilize precision test equipment to ensure all assemblies strictly comply with established electrical, insulation, and environmental requirements. This opportunity falls under NAICS code 541380 and was posted on August 17, 2026, with a response deadline of August 20, 2026. The contract is structured as a subcontract aimed at maintaining high quality and safety standards for critical aviation cabling components.

Testing Laboratories and Services

POSTED

about 15 hours ago

DEADLINE

Military-Grade Component Sourcing & Supply Chain ManagementThis subcontract with the Department of Defense, managed by Al DLA Aviation At Huntsville, focuses on military-grade component sourcing and supply chain management. The primary objective is the procurement and logistics management of components for cable assembly production, specifically targeting items that are export-controlled, prone to obsolescence, or have long lead times. The scope of work emphasizes risk mitigation and the identification of alternate sourcing to ensure production stability. Classified under NAICS code 423690, the opportunity was posted on August 17, 2026, with a response deadline of August 20, 2026.

Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

about 15 hours ago

DEADLINE

Precision Electrical Cable Assembly ManufacturingThis subcontract opportunity, titled Precision Electrical Cable Assembly Manufacturing, involves the full lifecycle manufacturing of branched electrical cable assemblies designed for the Patriot Weapon System. The scope of work encompasses the entire production process, including assembly, testing, packaging, and shipping, all performed to strict military specifications. Managed by the Department of Defense through DLA Aviation At Huntsville, the project falls under NAICS code 335999. The solicitation was posted on August 17, 2026, with a response deadline of August 20, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 15 hours ago

DEADLINE

Covered Telecommunications Equipment Compliance (CTES)This 8(a) sole source subcontract, titled Covered Telecommunications Equipment Compliance (CTES), is issued by the Department of Defense through Al DLA Aviation At Huntsville. The contract requires the provider to ensure that no covered telecommunications equipment or services are used during the performance of the work, necessitating formal representation in accordance with FAR 52.204-25 and the provision of support for waiver requests if applicable. The opportunity is categorized under NAICS code 541611 and will be performed in Fort Walton Beach, Florida. Interested parties must respond by August 27, 2026, following the posting date of August 17, 2026.

Administrative Management and General Management Consulting Services

POSTED

about 15 hours ago

DEADLINE

Technical Data and Export Control Compliance (JCP/ITAR)This 8(a) sole source subcontract with the Department of Defense, specifically Al DLA Aviation At Huntsville, focuses on Technical Data and Export Control Compliance. The primary objective is to provide Joint Certification Program certification and ensure strict adherence to the Arms Export Control Act through comprehensive export licensing support and compliance reporting. The project is categorized under NAICS code 541611 and will be performed in Fort Walton Beach, Florida. Interested parties should note the posting date of August 17, 2026, with a response deadline of August 27, 2026.

Administrative Management and General Management Consulting Services

POSTED

about 15 hours ago

DEADLINE

Upgraded Armament Control Unit (UACU) Evaluation and RepairThis subcontract, titled Upgraded Armament Control Unit (UACU) Evaluation and Repair, is issued by the Department of Defense through Al DLA Aviation At Huntsville. The scope of work involves the physical repair, corrective action planning, and failure mode analysis of one UACU with part number 13745403. The project is categorized under NAICS code 334511 and will be performed in Fort Walton Beach, Florida. The contract is designated as an 8(a) Sole Source set-aside under FAR 19.8. It was posted on August 17, 2026, with a response deadline of August 27, 2026.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 15 hours ago

DEADLINE

Armament Control Unit (ACU) Repair and Rebuild ServicesThis subcontract for Armament Control Unit Repair and Rebuild Services, issued by the Department of Defense via Al DLA Aviation At Huntsville, involves the repair and restoration of 12 ACUs with part number 13225434. The scope of work includes component replacement, rework, and functional testing based on specific evaluation findings. The opportunity is designated as an 8(a) Sole Source set-aside under NAICS code 811212, with the place of performance located in Fort Walton Beach, Florida. The solicitation was posted on August 17, 2026, with a response deadline of August 27, 2026.

Computer and Office Machine Repair and Maintenance

POSTED

about 15 hours ago

DEADLINE

Logistics & Distribution ManagementThis subcontract for Logistics and Distribution Management is issued by the Department of Defense through the DLA Aviation office in Huntsville. The scope of work involves managing comprehensive inbound and outbound logistics, including inventory management and shipping operations to Oklahoma. A critical requirement of the contract is ensuring all packaging adheres to MIL-STD-2073 military standards and that all processes maintain full WAWF and IUID compliance. The opportunity is categorized under NAICS code 484220 and was posted on August 17, 2026. Interested parties must submit their responses by the deadline of August 20, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 15 hours ago

DEADLINE

Supply Chain & Component SourcingThis subcontract, titled Supply Chain and Component Sourcing, is issued by the Department of Defense through Al DLA Aviation At Huntsville. The primary objective is the procurement, qualification, and traceability of electronic components, raw materials, and sub-assemblies necessary for production. All activities must strictly adhere to counterfeit prevention standards as well as RoHS and REACH compliance. The opportunity was posted on August 17, 2026, with a response deadline of August 20, 2026. It is categorized under NAICS code 423820, focusing on the strategic sourcing and quality assurance of critical production materials.

Farm and Garden Machinery and Equipment Merchant Wholesalers

POSTED

about 15 hours ago

DEADLINE

Engineering & Obsolescence Mitigation ServicesThe Engineering and Obsolescence Mitigation Services subcontract, issued by the Department of Defense through DLA Aviation At Huntsville, focuses on maintaining long-term producibility and compliance for critical components. The scope of work includes performing detailed obsolescence analysis, component redesign, and reverse engineering, as well as providing qualification support to ensure all updates adhere to original form, fit, and function requirements. This opportunity falls under NAICS code 541330 and was posted on August 17, 2026, with a response deadline of August 20, 2026. The contract is designed to mitigate technical risks associated with aging components to ensure continued operational readiness for the agency.

Engineering Services

POSTED

about 15 hours ago

DEADLINE