This Solicitation opportunity from Florida was posted on May 30, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

As Needed Furnish And Install Team Insertvalve Brand System

Closed

IFB-KM-25-104State & Local

Submission Closed07/01/2025, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 331511

New

DIBBS

Precision Metal Casting and Forging for Air Director Ducts

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Gear Housing and Shaft Raw Material SupplyThis subcontract, titled Gear Housing and Shaft Raw Material Supply, is issued by the DLA Weapons Support Land Supply Chain under the Department of Defense. The contractor is responsible for providing raw cast or forged housings and shafts for prime contractors fulfilling DLA supply contracts. This involves the casting or forging of gear assembly housings to precise dimensions using industrial presses or foundries, with deliverables consisting of either raw or rough-machined components. To ensure quality and regulatory compliance, the provider must supply Mill Test Reports for material traceability and alloy verification. Furthermore, all work must strictly adhere to the requirements of the Berry Amendment and the Buy American Act. The opportunity is categorized under NAICS code 331511, with a response deadline set for November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Metal Casting and Tooling for Fire Equipment NozzlesThis subcontract, issued by the Department of Defense DDSP New Cumberland Facility, requires the design and fabrication of casting molds and tooling to produce 117 cast metal nozzle bodies for fire hose nozzles under NSN 4210014086992. The project is designated as a Service-Disabled Veteran-Owned Small Business set-aside and falls under NAICS code 331511. Performance will take place in New Cumberland, Pennsylvania. The contractor must strictly adhere to the Buy American Act for domestic sourcing and comply with the DLA Master List of Technical and Quality Requirements RA001. Additionally, the manufacturing process must be entirely mercury-free. The final deliverable consists of 117 completed cast metal nozzle components.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Metal Casting and Fabrication of Access Door HandlesThis subcontract involves the metal casting and fabrication of two access door handles, part number 65207-02015-101, for the DLA Weapons Support ASC. The components must be manufactured according to Sikorsky Aircraft Corp drawing 65207-02015, with a strict prohibition on the use of additive manufacturing processes. Performance of the contract will take place in New Cumberland. To be eligible, contractors must maintain SAE AS9003 or ISO 9001 compliance, hold JCP certification, and meet CMMC Level 2 requirements. Additionally, authorization for ITAR and EAR is mandatory. The response deadline for this procurement is November 5, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Fan End Bell Casting and Forging ServicesThis subcontract for Fan End Bell Casting and Forging Services involves the production of raw metal blanks for prime contractors supporting DLA Troop Support aerospace projects. The selected provider will utilize industrial furnaces or forging presses to cast or forge metal blanks to the specific dimensions of part number 8840-2, delivering them as rough-machined or near-net-shape components. The work must be performed at Tinker AFB and strictly adhere to the DLA Master List of Technical and Quality Requirements and critical application item quality standards. Additionally, the contractor is required to comply with the Buy American and Balance of Payments Program. This opportunity is managed by the Department of Defense through Depot Oklahoma.

POSTED

DEADLINE

Metal Casting and Tooling for Barrel BracketThis subcontract involves the metal casting and precision machining of a Barrel Bracket for the Department of Defense, specifically supporting DLA Weapons Support. The contractor is responsible for delivering one completed and inspected bracket produced strictly according to NSN specifications, with a explicit prohibition on the use of additive manufacturing. Performance of the contract will take place in Fort Stewart. To be eligible, the provider must maintain SAE AS9003 or ISO 9001 certification and ensure full compliance with ITAR and EAR regulations. Additionally, approval from the US/Canada Joint Certification Program is required. Responses to this solicitation are due by November 9, 2026.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Highline Trolley Casting and ToolingThe Highline Trolley Casting and Tooling subcontract involves the fabrication of custom molds and the production of rough-cast trolley bodies for prime contractors supporting DLA Troop Support. All work must strictly adhere to TDP Rev A Gen 2 and Drawing NR 81898 805-2555040, with materials meeting MIL-PRF-10924H(2) standards and a total prohibition on mercury-containing compounds. Performance will take place in San Diego, California, under NAICS code 331511. This opportunity is designated as a HUBZone set-aside and requires the contractor to maintain a CMMC Level 2 self-assessment and ensure full compliance with the Buy American Act. Interested parties must submit their responses by November 9, 2026, to provide the necessary tooling and casting deliverables for the Department of Defense.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Metal Casting and Manufacturing of Pipe CapsThis subcontract involves the metal casting and manufacturing of 424 pipe caps for prime contractors supporting the DLA Weapons Support Nuclear Reactor Program. The project requires the execution of the casting process for Part M1183/2-08S using custom tooling in strict accordance with MIL-DTL-1183/2A(1) and MIL-DTL-1183K(2) SUP 1 specifications. Quality control must be performed per QAP 16236 SQAP-4730-0003, and the final deliverables include the finished pipe caps along with Certificates of Quality Compliance. The opportunity is a total small business set-aside under NAICS code 331511 and requires full compliance with the Buy American Act. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by November 9, 2026, to provide the necessary manufacturing services for the Department of Defense.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Casting and Forging Services for Pneumatic Bead BreakerThis subcontract involves providing industrial casting and forging services for the Department of Defense, specifically supporting DLA Weapons Support Land projects. The contractor is responsible for shaping raw metal components for the Pneumatic Tire Bead Breaker, NSN 4910-01-325-2974, utilizing industrial casting furnaces, forging presses, and specialized tooling or molds to deliver finished metal blanks and components. The project is categorized under NAICS code 331511 and requires strict adherence to DFARS Buy American Act regulations. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by November 9, 2026, regarding the solicitation posted on October 28, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Vehicle Hatch Door Casting and ManufacturingThis subcontract for the Department of Defense and DLA Weapons Support Land Supply Chain involves the casting and manufacturing of vehicle hatch doors. The selected provider will perform metal casting in accordance with MIL-DTL-11356 and specific technical drawings using specialized tooling. Final products must be packaged according to ASTM D3951 and MIL-STD-129 standards for delivery. To be eligible, contractors must maintain JCP certification for handling export-controlled data and hold CMMC Level 2 certification. Additionally, the provider must adhere to quality management systems under SAE AS9003 or ISO 9001. The place of performance is located at Fort Hood, Texas, with a response deadline of November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Manufacture of Turret Lock Bolts (Critical Gun Part)This subcontract involves the manufacture of Turret Lock Bolts for the Department of Defense, specifically supporting DLA Weapons Support projects at the DDSP New Cumberland Facility. The scope of work includes the development of custom tooling, metal casting using high-grade alloys, and precision post-casting machining. Because these components are classified as Critical Gun Parts and Critical Application Items, the process requires rigorous non-destructive testing to ensure strict adherence to safety and performance standards. The successful contractor is responsible for delivering three completed bolts accompanied by full material certifications and detailed inspection reports. This project falls under NAICS code 331511 and is being performed in New Cumberland, Pennsylvania. Interested parties must adhere to the response deadline of November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Investment Casting for Fuel Control LeverThis subcontract involves the production of raw fuel control lever blanks via investment casting for the DLA Weapons Support ASC. The contractor is responsible for manufacturing raw lever bodies using specialized tooling in strict accordance with Drawing NR 98748 8629958 and 13873 EI-005864023. Because these components are designated as Critical Safety Items, the provider must ensure all material specifications are met without deviation. To be eligible for this project, the contractor must maintain SAE AS9100 certification and ensure full compliance with ITAR and EAR regulations. The work is associated with the Department of Defense and is performed at Tinker AFB. Interested parties must respond by November 4, 2026, under NAICS code 331511.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days

AI Contract Overview

The Pasco County Board of County Commissioners is seeking bids from qualified vendors to supply all necessary labor, materials, equipment, tools, supervision, and ancillary items required for the installation of TEAM® InsertValve systems ranging from four inches to twelve inches in diameter. These systems are to be installed on various types of pipes, including PVC, Steel, Cast Iron, Ductile Iron, and Asbestos Cement pipes, across locations throughout Pasco County. The project aims to enhance infrastructure by ensuring proper valve installation in existing pipelines, adhering to specified standards and requirements. The solicitation, titled "As Needed Furnish And Install Team Insertvalve Brand System," was posted on May 30, 2025, with a deadline for responses set for July 1, 2025. The contract value is estimated to be between $500,000 and $1,500,000. This procurement is managed under the NAICS code 331511, which pertains to iron and steel mills and ferroalloy manufacturing, indicating the specialized nature of the work. Interested vendors can access additional details and submit their bids through the provided online portal.

General Info

Agency

Florida → Pasco County

NAICS

331511 - Iron Foundries

Place of Performance

FL, USA

Set-Aside

NONE

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedMay 30

Solicitation

Response DeadlineJul 1

Deadline has passed

Submission Closed

07/01/2025, 12:00:00 AM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyFlorida → Pasco County

ContactsNo contacts available

OfficeN/A

Organization / AgencyFlorida → Pasco County

Office AddressN/A

ContactsNo contact information available

Full Description

The Pasco County Board of County Commissioners invites vendors to submit bids provide all labor, materials, equipment, tools, supervision and necessary ancillaries to install four-inch (4”) thru twelve-inch (12”) TEAM® InsertValve systems on PVC, Steel Pipe, Cast Iron Pipe, Ductile iron Pipe, or Asbestos Cement pipe throughout Pasco County, as per the listed specifications.