Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Government Contract opportunity from California was posted on July 15, 2024. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Asbestos Abatement Services

Closed
State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 562910
New
Theatre Mold Remediation Scope of Work
Solicitation # AT25-0006
Solicitation AT25-0006 is a subcontracting opportunity with Adams and Associates, Inc. for comprehensive mold remediation at Theatre Building 1086 of the Atterbury Job Corps Center in Edinburgh, Indiana. The project was prompted by a sprinkler system failure and requires the removal and remediation of mold throughout the building, including the cleaning or replacement of theater seating cushions and the removal of affected drywall, gypsum wallboard, and acoustical ceiling tiles. All work must be performed in accordance with ANSI/IICRC S520 standards, EPA and OSHA regulations, and the Micro Air Inc. Mold Testing report dated April 11, 2024. The contractor is required to provide a Certified Industrial Hygienist to verify materials and conduct final clearance walkthroughs, as well as a detailed mold remediation plan. This is a single lump sum contract awarded based on best value, with evaluation weights distributed across price (60 points), quality (20 points), past performance (10 points), and schedule (10 points). Bidders must be licensed contractors in the state of Indiana and provide certification of compliance with Davis Bacon Act wage rates. Required submission documents include a detailed cost breakdown, a timeline for substantial completion, a W9, a vendor questionnaire, and proof of insurance naming Adams and Associates, Inc. as an additional insured. The contractor must start work within 14 days of the Notice to Proceed, and final payment is subject to Net 30 terms upon the submission of certified payroll records, a completed SF 1413, and a release of liens.
Atterbury Job Corps Center

POSTED

about 4 hours ago

DEADLINE

in 11 days
NAICS: 562910
New
SLED
MPE Three Classroom Mold Abatement - Rooms 22, 23, 24
Solicitation # 01 (2026-2027)
The Montebello Unified School District is soliciting bids under RFQ No. 01 (2026-2027) for mold abatement services in three classrooms, specifically Rooms 22, 23, and 24 at MPE in Montebello, California. The scope of work includes the abatement process, cleaning of A/C systems, and the movement of furniture before and after the project. Contractors must utilize containment, three-stage decors, and negative air pressure, while maintaining CAL/OSHA safety standards and good housekeeping. All work will be monitored by a third-party consultant, and the contractor is responsible for any necessary re-cleaning if good clearances are not achieved. Regulated disposal must be accompanied by a manifest, and proper mold signage and yellow caution flagging are required on-site. Bids must be submitted by November 2, 2026, at 9:00 a.m. via the designated secure portal. The contract will be awarded to the best value bidder based on price, proven ability to comply with specifications, capability, and credibility, with a preference for local firms in the event of equal low bids. Requirements for submission include a Non-Collusion Affidavit and a Certificate of Workers' Compensation Insurance. The successful vendor must provide a minimum one-year warranty and maintain comprehensive insurance naming the District as an additional insured. Payment is due 30 days after the receipt of a correct invoice or acceptance of goods. The District reserves the right to terminate the agreement with 30 days' written notice or immediately upon failure to perform.
Montebello Unified School District

POSTED

about 13 hours ago

DEADLINE

in 5 days

AI Contract Overview

Show more

The High Speed Rail Authority of California is seeking a subcontractor for Asbestos Abatement Services under NAICS code 562910. The scope of work involves the identification, containment, removal, and disposal of both friable and non-friable asbestos-containing materials. All activities must be performed in strict compliance with EPA, OSHA, DTSC, and CDPH regulations, with specific requirements for air monitoring, worker protection, and the provision of clearance reporting. This opportunity was posted on July 15, 2024, and requires a response by the deadline of August 7, 2024. Interested parties can find further details and submission guidelines through the Cal eProcure portal.

General Info

Place of Performance

CA, USA

Set-Aside

NONE

Documents

This scope was carved out of HSR24-05.

The full solicitation package (5 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

HSR24-05 Clearance and Demolition Services at 5355 N. Golden State Blvd., Fresno, CA 93722.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyCalifornia → High Speed Rail Authority
ContactsNo contacts available
OfficeN/A
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Identification, containment, removal, and disposal of friable and non-friable asbestos-containing materials in compliance with EPA, OSHA, DTSC, and CDPH regulations. Includes air monitoring, worker protection, and clearance reporting.

More opportunities from California → High Speed Rail Authority

Same awarding agency

NAICS: 541350
New
SLED
HSR26-26 Re-Bid #2 Fresno Building Inspection
Solicitation # HSR26-26
The California High-Speed Rail Authority is seeking a contractor for the HSR26-26 Re-Bid #2 Fresno Building Inspection project. This informal solicitation requires a contractor holding a valid Class A or B license from the California Department of Consumer Affairs, Contractors State License Board to perform comprehensive on-site building inspections at the Fresno Office located at 1111 H Street, Fresno, CA. The scope of work involves evaluating major building systems, including plumbing, sewer, drainage, electrical, HVAC, roofing, building envelope, security, life-safety, and visible structural components. The contractor must assess these systems for condition, functionality, safety, regulatory compliance, and potential risks based on current federal, state, and local building codes. Key deliverables include a comprehensive written inspection report with narrative descriptions and photographs, a prioritized list of corrective actions categorized by urgency, and rough order-of-magnitude cost estimates for repairs. The performance period spans from November 1, 2026, through January 31, 2027, with a draft report due within ten business days of completing on-site work and a final report due five business days after receiving feedback. Bids are due by November 6, 2026, at 2:00 PM. Award selection will be based on the lowest responsible responsive bid, with a 3% to 5% incentive applied for Disabled Veteran Business Enterprise participation. Required submission documents include a cost sheet, bidder certifications, and a Payee Data Record.
Building Inspection Services

POSTED

6 days ago

DEADLINE

in 9 days
View Details
NAICS: 331420
SLED
HSR26-28 Invitation for Bids for Copper Conductors
Solicitation # HSR26-28
The California High-Speed Rail Authority has issued Invitation for Bids HSR26-28 for the procurement of OCS Copper Conductors to support the First Construction Segment of its high-speed rail track. The scope of work requires the contractor to supply high-conductivity 150mm2 Copper Tin contact wire and 65mm2 Bz catenary/messenger wire for the SNCF S220 OCS system. All materials must be Buy America compliant per 49 U.S.C. 22905 and meet various international standards, including EN 50149, IEC 63190, EN 50182, and EN 50326. The contractor is responsible for the direct handoff of materials to the Authority's onsite contractor at railheads located in Kern and Fresno Counties. The contract will be awarded to the lowest responsible responsive bidder based on the total contract bid price for years one through three. Bids are due by November 13, 2026, at 12:00 PM PST and must include a bid bond equal to 10 percent of the total bid amount. Submission requirements are strict, requiring a hard-copy bid form in a separately sealed envelope, along with a comprehensive bid package submitted both in hard copy and as a single searchable PDF. Bidders must also certify compliance with non-discrimination, lobbying, and labor laws, and commit to small business goals, including a 25 percent goal for small businesses and a 3 percent goal for disabled veteran business enterprises. Contract administration includes electronic monthly invoicing and a requirement for the contractor to submit a detailed delivery plan within 30 days of the Notice to Proceed. Quality assurance involves potential inspections at the place of production and final acceptance testing at the destination. Any products failing random sample reviews will result in a Non-Conformance Report requiring a root cause analysis and corrective action plan. All shipments must adhere to specific packaging and marking standards, including detailed packing sheets that reference the Authority's contract number and item descriptions.
Copper Rolling, Drawing, Extruding, and Alloying

POSTED

24 days ago

DEADLINE

in 16 days
View Details
NAICS: 335929
SLED
HSR26-39 Invitation for Bids for Aluminum Conductors
Solicitation # HSR26-39
The California High-Speed Rail Authority has issued Invitation for Bids HSR26-39 for the procurement of Overhead Contact Systems (OCS) Aluminum Conductors to support the First Construction Segment of its high-speed rail track. The scope of work requires the manufacture and delivery of a complete portfolio of conductors based on the SNCF S220 OCS system, specifically 217,754 meters of Aluminum-Steel static/ground/earth wire (93.3mm2) and 214,334 meters of Aluminum-Steel auxiliary/feeder wire (288mm2). Materials must be delivered to railheads in Kern and Fresno Counties, with the contractor providing a direct handoff to the Authority's onsite contractor. The contract will be awarded to the lowest responsible responsive bidder based on the total bid price. Bids are due by November 19, 2026, at 12:00 PM PST and must include a bid bond equal to 10 percent of the total bid amount. Submissions require a specific format consisting of a hard-copy bid form in a separately sealed envelope and a comprehensive bid package submitted both in hard copy and as a single, searchable PDF. Key compliance requirements include mandatory Buy America certification per 49 U.S.C. 22905, adherence to various European (EN) standards, and compliance with federal procurement standards under 2 C.F.R. Part 200. Additionally, bidders must provide certifications regarding small business, DVBE, and DBE status, as well as disclosures regarding organizational conflicts of interest and the use of generative AI. The contractor is required to submit a detailed delivery plan within 30 days of the notice to proceed and must maintain a quality control system approved by the Authority. Inspection and testing may occur at the place of production, with final acceptance conducted at the destination. Payment will be processed electronically in accordance with the California Prompt Payment Act, with undisputed invoices paid within 45 days. The procurement also mandates compliance with prevailing wage laws, the Americans with Disabilities Act, and various executive orders regarding Russia sanctions and labor practices.
Other Communication and Energy Wire Manufacturing

POSTED

24 days ago

DEADLINE

in 22 days
View Details
NAICS: 332999
SLED
HSR25-29 Invitation for Bids for OCS Components
Solicitation # HSR25-29
The California High-Speed Rail Authority has issued Invitation for Bids HSR25-29 for the manufacture, inspection, assembly, and delivery of Overhead Contact System OCS components required for the First Construction Segment of its high-speed rail track. The scope of work involves producing components for an SNCF licensed S220 2 x 25000V 60Hz system, which must be assembled into cantilever assemblies and delivered F.O.B. Destination to railheads in Wasco and Fresno. All cast and machined steel components must be hot-dip galvanized according to ASTM A1223 and A153 standards, and all materials must be Buy America compliant per 49 U.S.C. section 22905. The contract will be awarded to the lowest responsible responsive bidder based on a pass/fail evaluation of technical criteria, including manufacturing capability, delivery capacity, and fifteen years of relevant experience. Bids are due by November 17, 2026, at 12:00 PM PST and must include a bid bond equal to 10 percent of the total bid amount. Bidders are required to commit to small business goals, including 25 percent Small Business, 3 percent Microbusiness, and 3 percent Disabled Veteran Business Enterprise utilization. Payment for undisputed invoices will be processed electronically in accordance with the California Prompt Payment Act, generally within 45 days.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 1 month ago

DEADLINE

in 20 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS