Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

This Government Contract opportunity from North Carolina was posted on July 2, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Asphalt Supply (Binder and Surface Mix)

Closed
State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 324121
New
SLED
Asphalt Paving Mixture SupplyThis subcontract opportunity with the Paulding County Government in Georgia is for the supply of hot-mix asphalt that adheres to GDOT specifications for use in roadway base and surface layers. The project falls under NAICS code 324121 and is intended to ensure high-quality material standards for road construction. The solicitation was posted on August 28, 2026, and requires a response by September 25, 2026, at 3:00 PM. Interested parties can find further details and submission guidelines through the provided Georgia Department of Administrative Services portal.
Paulding County Government

POSTED

2 days ago

DEADLINE

in 25 days
NAICS: 324121
New
SLED
Emulsion Material Supply
Texas Department of Transportation

POSTED

2 days ago

DEADLINE

in 23 days
NAICS: 324121
New
SLED
Asphalt Supply
Department of Economic Development

POSTED

2 days ago

DEADLINE

in 17 days
NAICS: 324121
New
SLED
Asphalt Supply (Type III and IV Mix)
Department of Economic Development

POSTED

2 days ago

DEADLINE

in 17 days
NAICS: 324121
New
SLED
Supply of Asphaltic Concrete (Hot Laid)The City of San Antonio is seeking a subcontractor for the supply of hot-mix asphalt or bituminous materials to be used in slurry seal and potential resurfacing activities. This procurement falls under NAICS code 324121 and is managed through the Texas state agency framework. Interested parties must submit their responses by the deadline of October 2, 2026. Further details regarding the solicitation and submission process can be accessed via the Texas SmartBuy portal.
CITY OF SAN ANTONIO

POSTED

3 days ago

DEADLINE

in about 1 month
NAICS: 324121
New
SLED
Asphaltic Concrete (Hot Mix) Supply and PlacementThe City of San Antonio is seeking a subcontractor for the supply and placement of hot-mix asphaltic concrete. This contract focuses on providing materials and labor for localized repairs or resurfacing based on specific site conditions. The solicitation was posted on August 28, 2026, with a response deadline of September 29, 2026. The project falls under NAICS code 324121 and is managed through the state of Texas procurement system.
CITY OF SAN ANTONIO

POSTED

3 days ago

DEADLINE

in 30 days
NAICS: 324121
New
Federal
TROOP SUPPORT MATERIALS
Solicitation # W911N226QA058
The contract solicitation W911N226QA058 for Troop Support Materials is a combined synopsis and solicitation issued by the W6QK Letterkenny Contracting Office under the Department of Defense, targeting small businesses as a total set-aside under NAICS code 324121. It is structured as a Multiple Award Indefinite-Delivery/Indefinite-Quantity (IDIQ) contract with a Firm-Fixed-Price basis, spanning a 10-year period consisting of a five-year base period and a single five-year option, with a total ceiling value of $9,000,000. The primary performance location is the Letterkenny Munitions Center in Chambersburg, Pennsylvania, where all equipment must be delivered and accepted at the destination F.O.B. point. The scope centers on the rental of equipment under Category 13, requiring contractors to provide timely delivery and pickup, 24-hour replacement of defective units, routine maintenance at no additional cost, and compliance with OSHA and Department of Army safety standards, including LEAD P 385-4 for security and fire prevention. All equipment must be commercially certified, properly preserved using standard commercial methods, and marked with Item Unique Identification (IUID) in accordance with MIL-STD-130, with potential use of government-assigned serial numbers and hazard labeling as required. The solicitation mandates comprehensive technical proposals demonstrating proven supply chain reliability, fleet readiness, and verifiable past performance, with evaluation prioritizing technical merit over price in a best-value trade-off process. The technical subfactors of supply chain availability, fleet management capability, and documented past experience are critical, and any lack of substantiation renders a proposal unacceptable. Contract administration requires invoicing exclusively through Wide Area WorkFlow (WAWF) and payment by Electronic Funds Transfer through SAM. Contractors must comply with extensive FAR and DFARS clauses covering ethics, subcontracting limitations, labor protections, trafficking prevention, cybersecurity safeguards (including NIST SP 800-171 compliance with a deviation), Buy American Act requirements, and prohibitions on using covered telecommunications equipment. The contractor must maintain an active UEI in SAM, certify small business status, and meet an active participation threshold of responding to at least 75% of requests for quotation to remain eligible for the option period. Deliveries are restricted to weekdays between 7:00 AM and 3:00 PM, excluding federal holidays, and proposals
W6QK Lad Contr Office

POSTED

3 days ago

DEADLINE

in 12 days
NAICS: 324121
New
SLED
Asphalt SupplySan Bernardino County in California is seeking a subcontractor for the supply of hot-mix asphalt to be used for parking areas, trails, and various other paved surfaces. This subcontract falls under NAICS code 324121 and is associated with a project located in the 92316 zip code area. The opportunity was posted on August 28, 2026. Further details regarding the project can be accessed through the provided California Environmental Quality Act Net link.
San Bernardino County

POSTED

3 days ago

DEADLINE

N/A
NAICS: 324121
New
SLED
Asphalt Supply (Materials Only)
East Laknsing Public Schools

POSTED

3 days ago

DEADLINE

in 15 days
NAICS: 324121
New
SLED
Asphalt Paving Mix Supply
California Department of Transportation

POSTED

3 days ago

DEADLINE

in 12 days
NAICS: 324121
New
SLED
Asphalt Patching Mix Supply
Department of Corrections

POSTED

4 days ago

DEADLINE

in 9 days
NAICS: 324121
New
SLED
Hot Mix Asphalt Supply
City of Paramount

POSTED

4 days ago

DEADLINE

in 9 days

AI Contract Overview

Show more

The contract specifies the supply of NCDOT Type I19.0C binder course and Type S9.5B/C surface mix asphalt, to be delivered FOB Destination to Franklin, North Carolina. All materials must meet established NCDOT specifications and be accompanied by complete quality control documentation along with certified mix design certifications to ensure compliance with state transportation standards. The contract is classified as a subcontract under NAICS code 324121, indicating it relates to petroleum and coal products manufacturing. The solicitation was posted on July 2, 2026, with a response deadline of July 27, 2026, and is being managed by Southwestern Community College on behalf of the North Carolina agency. Delivery logistics are tied to the destination point in Franklin, NC, meaning the vendor assumes responsibility for transportation and associated costs until the materials arrive at that location. All submissions must demonstrate adherence to technical requirements and provide verifiable proof of material conformity prior to acceptance.

General Info

Supply NCDOT-approved asphalt to Franklin, NC, FOB destination, with full compliance documentation.

Agency

North Carolina → Southwestern Community CollegeView Agency

NAICS

324121 - Asphalt Paving Mixture and Block ManufacturingView NAICS

Place of Performance

NC, USA

Set-Aside

NONE

Documents

This scope was carved out of 2026-07-01.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Southwestern Community College - Driver Training

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyNorth Carolina → Southwestern Community College
ContactsNo contacts available
OfficeN/A
Organization / Agency
North Carolina → Southwestern Community College
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Supply of NCDOT Type I19.0C binder course and Type S9.5B/C surface mix asphalt, delivered FOB Destination to Franklin, NC, with quality control documentation and mix design certification.

More opportunities from North Carolina → Southwestern Community College

Same awarding agency

NAICS: 541620
SLED
Project Safety and Site ManagementThe contract entails the development and implementation of a comprehensive safety plan aligned with OSHA 29 CFR 1926 standards, focusing on critical site hazards including fall protection systems, debris control, and magnetic sweeping to eliminate metallic contaminants. The scope requires detailed planning and execution to ensure worker safety and regulatory compliance across all operational phases, with particular emphasis on preventing injuries from falls and hazards associated with loose metal debris. The plan must be tailored to the specific conditions of the project location and integrated into daily site management protocols. This is a subcontract under NAICS code 541620, issued by Southwestern Community College in North Carolina, with a bid submission deadline of September 3, 2026. The solicitation was posted on August 5, 2026, and the contract is intended for a service provider capable of delivering professionally engineered safety solutions. While the precise worksite location is not specified, performance is expected to occur within the jurisdiction of North Carolina under the oversight of the requesting agency. Respondents must demonstrate technical expertise in occupational safety compliance, debris mitigation, and proven experience with industrial site safety systems.
Environmental Consulting Services

POSTED

26 days ago

DEADLINE

in 4 days
View Details
NAICS: 321911
SLED
Decking Supply and Replacement (CDX Plywood)The contract entails the supply and replacement of 23,000 square feet of 5/8-inch CDX plywood decking, involving the removal of existing damaged sections and the installation of new material in full compliance with applicable building codes. All work must be executed to meet structural and safety standards, ensuring durability and proper integration with the existing deck system. The scope includes both material procurement and labor for complete removal and installation, with no allowance for substandard or non-compliant materials. This is a subcontract opportunity issued by Southwestern Community College in North Carolina, with a posted date of August 5, 2026, and a deadline for responses set for September 3, 2026, at 6:00 PM. The NAICS code 321911 indicates classification under other wood product manufacturing, affirming the focus on manufactured building materials. The place of performance and contact details are unspecified, but all work is expected to occur at the college’s facilities. Interested parties must submit proposals by the stated deadline to be considered for award.
Wood Window and Door Manufacturing

POSTED

26 days ago

DEADLINE

in 4 days
View Details
NAICS: 426110
SLED
Roofing Material Supply (Asphalt Shingles and Membrane)The contract entails the supply of roofing materials totaling 18,000 square feet of asphalt shingles and 5,000 square feet of 60-mil single-ply membrane, inclusive of all necessary underlayment and fasteners required for proper installation. Delivery is specified as FOB Destination to a site in North Carolina, ensuring the vendor is responsible for transportation and associated costs until the materials reach the designated location. The solicitation is categorized as a subcontract under NAICS code 426110, indicating wholesale trade in building materials, and is issued by Southwestern Community College in North Carolina. The opportunity was posted on August 5, 2026, with a response deadline set for September 3, 2026, at 6:00 PM local time, allowing potential suppliers sufficient time to prepare and submit their proposals. No set-aside provisions or organizational type restrictions are specified, leaving the opportunity open to eligible contractors without preferential targeting.

POSTED

26 days ago

DEADLINE

in 4 days
View Details
NAICS: 238169
SLED
Metal Flashing, Gutters, and Downspouts Fabrication & InstallationSouthwestern Community College in North Carolina is seeking a subcontractor to fabricate and install custom metal flashing, drip edge, gutters, and downspouts designed to integrate seamlessly with new roofing systems to ensure effective water diversion and structural protection. The work must meet precise compatibility standards for durability, performance, and aesthetic alignment with modern roofing materials, focusing on long-term water management and prevention of leaks or damage. The opportunity is open for bidding with a deadline for responses set for September 3, 2026, and falls under the NAICS code 238169 for other building completion contractors. Although specifics regarding location, contact information, and set-aside status are not provided, the contract is structured as a subcontract and requires full compliance with industry standards for materials and installation techniques. Interested parties are directed to the official solicitation portal for detailed technical requirements and submission protocols.

POSTED

26 days ago

DEADLINE

in 4 days
View Details
NAICS: 238165
SLED
Roofing System Installation – Single-Ply Membrane (Low-Slope Roofs)The contract entails the complete demolition of existing roofing materials and the installation of a new 5,000 square foot low-slope roofing system using a 60-mil single-ply membrane, either TPO or PVC, in full compliance with manufacturer specifications. The scope includes all necessary substrate preparation, insulation layer installation, and integration of proper drainage systems to ensure long-term performance and water management. Work must adhere strictly to industry standards and product guidelines, covering every phase from removal to final verification of structural integrity and waterproofing effectiveness. The project is positioned as a subcontract under Southwestern Community College in North Carolina, with an official posting date of August 5, 2026, and a mandatory response deadline of September 3, 2026, at 6:00 PM. The NAICS code 238165 confirms the classification as a roofing contractor service, with no set-aside provisions indicated for small or specialized businesses.

POSTED

26 days ago

DEADLINE

in 4 days
View Details
NAICS: 238165
SLED
Roofing System Installation – Asphalt Shingles (Pitched Roofs)The contract calls for the complete demolition of the existing roofing system and the installation of an 18,000 square foot asphalt shingle roofing system on pitched roof areas, with full compliance to ASTM and manufacturer specifications. Work includes replacing damaged decking, applying proper underlayment, installing all necessary flashing components, and ensuring adequate ventilation to meet performance and durability standards. The scope is focused exclusively on pitched roof sections and requires adherence to industry best practices for long-term structural integrity and weather resistance. This subcontract is issued by Southwestern Community College in North Carolina and is publicly posted with a response deadline of September 3, 2026. The NAICS code 238165 classifies the work under roofing contractors, indicating it is intended for specialized subcontractors with expertise in commercial and institutional roofing systems. The contract does not specify a set-aside type or point of contact, and performance is expected to occur at the college’s facility, though exact location details are not provided. Interested parties must submit proposals prior to the deadline through the provided online portal.

POSTED

26 days ago

DEADLINE

in 4 days
View Details
NAICS: 238160
SLED
Southwestern Community College - Swain Center Roof
Solicitation # 2026-08-01
Southwestern Community College in Swain County, North Carolina, is soliciting proposals for the complete replacement of a 23,000-square-foot roofing system at its Swain Center facility in Bryson City, NC. The project involves removing all existing roofing materials and installing new systems across two distinct profiles: 18,000 square feet of steep-slope asphalt shingle roofing and 5,000 square feet of low-slope membrane roofing. The scope includes full structural decking replacement using 5/8” CDX plywood or APA-rated OSB, installation of ice and water shields, synthetic underlayments, metal flashings, gutters, and downspouts, all in strict compliance with the 2024 North Carolina State Building Code and OSHA 29 CFR 1926. The vendor must submit a detailed Safety & Site Management Plan, adhere to rigorous material standards including ASTM D3462, D3161 Class F, and D1970, and ensure wind uplift and drainage requirements are met with zero ponding exceeding one-quarter inch after testing. Proposals must be submitted by September 3, 2026, in physical hard copy only through the U.S. Postal Service or overnight courier to the college’s Sylva address, with electronic submissions strictly prohibited. The procurement is structured as a best-value trade-off, not a lowest price technically acceptable (LPTA) award, meaning the selection will prioritize technical excellence, responsiveness, and overall value. Key requirements include providing evidence of prior similar project experience, three customer references via Attachment E, financial stability certification through Attachment G with a duty to report material changes, E-Verify compliance, and certification of non-debarment and non-collusion under North Carolina law. The vendor must designate an on-point Contract Manager and Customer Service Point of Contact, and deliver all work within 90 calendar days of purchase order issuance under FOB Destination terms. Final acceptance occurs on-site following joint inspections by the College Project Manager and a manufacturer’s technical representative, requiring successful water testing, magnetic nail sweeps, complete debris removal, and submission of 30-year manufacturer shingle warranties, 20-year NDL membrane warranties, a five-year workmanship warranty, lien waivers, and as-built documentation. Pricing is to be submitted via Attachment A, but no contract value is available as the document is a solicitation without filled-in vendor costs. All proposals must be sealed and include mandatory attachments
Roofing Contractors

POSTED

26 days ago

DEADLINE

in 4 days
View Details