Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Roofing System Installation – Single-Ply Membrane (Low-Slope Roofs)

Active

State & Local

Response Deadline09/03/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the complete demolition of existing roofing materials and the installation of a new 5,000 square foot low-slope roofing system using a 60-mil single-ply membrane, either TPO or PVC, in full compliance with manufacturer specifications. The scope includes all necessary substrate preparation, insulation layer installation, and integration of proper drainage systems to ensure long-term performance and water management. Work must adhere strictly to industry standards and product guidelines, covering every phase from removal to final verification of structural integrity and waterproofing effectiveness. The project is positioned as a subcontract under Southwestern Community College in North Carolina, with an official posting date of August 5, 2026, and a mandatory response deadline of September 3, 2026, at 6:00 PM. The NAICS code 238165 confirms the classification as a roofing contractor service, with no set-aside provisions indicated for small or specialized businesses.

General Info

Demolish old roof, install 5,000 sq ft TPO/PVC membrane system per specs for Southwestern Community College.

Agency

North Carolina → Southwestern Community CollegeView Agency

NAICS

238165View NAICS

Place of Performance

NC, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 5

subcontract

Response DeadlineSep 3

Submission deadline

Response Deadline

09/03/2026, 06:00:00 PM UTCin 27 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyNorth Carolina → Southwestern Community College

ContactsNo contacts available

OfficeN/A

Organization / Agency

North Carolina → Southwestern Community College

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Demolition and installation of 5,000 SF of 60-mil single-ply membrane (TPO/PVC) on low-slope roofs, including substrate prep, insulation, and drainage integration per manufacturer specs.

Similar Contracts

Same NAICS industry code

Roof Replacement and WaterproofingThe contract entails the full replacement or rehabilitation of an 11,000 square foot commercial roof, encompassing complete removal of the existing system, installation of new underlayment and insulation, application of a durable membrane, and comprehensive waterproofing to ensure long-term integrity. All work must meet stringent performance standards to safeguard the building structure from water intrusion and environmental exposure over the system’s expected lifespan. The solicitation is classified as a subcontract under NAICS code 238165 for Roofing Contractors, issued by the State of North Carolina’s Construction Office, and is open for response until August 24, 2026. The procurement does not specify a set-aside type or point of contact, and performance is expected to take place within North Carolina, though exact location details are not provided. Interested parties must submit proposals through the state’s online portal before the deadline to be considered.

State of NC - Construction Office

POSTED

DEADLINE

Roofing with Fiberglass Shingles

POSTED

DEADLINE

Roofing System Installation – Asphalt Shingles (Pitched Roofs)The contract calls for the complete demolition of the existing roofing system and the installation of an 18,000 square foot asphalt shingle roofing system on pitched roof areas, with full compliance to ASTM and manufacturer specifications. Work includes replacing damaged decking, applying proper underlayment, installing all necessary flashing components, and ensuring adequate ventilation to meet performance and durability standards. The scope is focused exclusively on pitched roof sections and requires adherence to industry best practices for long-term structural integrity and weather resistance. This subcontract is issued by Southwestern Community College in North Carolina and is publicly posted with a response deadline of September 3, 2026. The NAICS code 238165 classifies the work under roofing contractors, indicating it is intended for specialized subcontractors with expertise in commercial and institutional roofing systems. The contract does not specify a set-aside type or point of contact, and performance is expected to occur at the college’s facility, though exact location details are not provided. Interested parties must submit proposals prior to the deadline through the provided online portal.

Southwestern Community College

POSTED

DEADLINE

Roof Ridge Cap Replacement – Specialty Roofing Contractor

FA8137 Afsc Pzioc

POSTED

DEADLINE

in about 1 month

Roofing System Repair or ReplacementThe contract involves the assessment, repair, or full replacement of the roofing system on House 113, requiring complete removal of all damaged materials and installation of new underlayment, shingles, and flashing to ensure a fully weather-tight enclosure. The work must meet industry standards for durability and water resistance, with attention to proper sealing and integration at all roof penetrations and edges. All materials and labor must be provided by the contractor, who is responsible for final inspection and verification of the roof's integrity prior to project completion. The solicitation is classified as a subcontract under NAICS code 238165 for roofing contractors, issued by the Georgia State Financing and Investment Commission. It was posted on August 3, 2026, with a response deadline of September 3, 2026, at 7:00 PM. The place of performance is not explicitly defined in the provided data, but the work is specifically tied to House 113, and all activities must comply with state and local building codes. No set-aside provisions or specific eligibility requirements are indicated, and bids are expected to be submitted through the official Georgia procurement portal linked in the contract details.

Georgia State Financing and Investment Commi

POSTED

DEADLINE

Roofing and Weatherproofing RepairsThe contract pertains to the replacement or repair of roofing systems, flashing, insulation, and waterproofing membranes that have been damaged as a result of hurricane impact. Work is to be performed under subcontract and is classified under NAICS code 238165, which covers roofing contractors. The solicitation was posted on July 31, 2026, with a response deadline set for September 1, 2026, indicating a window of approximately six weeks for interested parties to submit proposals. The contracting agency is the Georgia State Financing and Investment Commission, operating under the state of Georgia, and the work is anticipated to take place within the state, though specific locations are not detailed. The contract focuses exclusively on restoring weatherproofing integrity to structures affected by severe weather events, emphasizing urgency and technical proficiency in mitigating further damage and ensuring long-term resilience.

Georgia State Financing and Investment Commi

POSTED

DEADLINE

Standing Seam Metal Roofing InstallationThe contract involves the installation of pre-finished standing seam metal roofing using a concealed clip system, with all necessary flashing and weatherproofing components included to ensure long-term durability and resistance to environmental elements. The work must be performed in accordance with industry best practices for metal roofing systems, emphasizing proper alignment, secure fastening, and complete sealing to prevent leaks and structural damage over time. This is a subcontract opportunity posted by the Kentucky Finance Facilities/Support Service under NAICS code 238165, with a response deadline of August 14, 2026, at 5:30 PM. The place of performance is listed as “Other,” indicating the project site has not been specified publicly, and no set-aside program details are provided. Interested parties must submit their proposals through the provided online portal before the deadline, and all work is expected to meet the technical and performance requirements associated with high-quality commercial or institutional metal roofing installations.

Finance Facilities/Support Svc

POSTED

DEADLINE

Asphalt Shingle Roofing (Slate Appearance)The contract involves the tear-off and re-roofing of a structure using asphalt shingles designed to closely mimic the visual appearance of slate, specifically on designated sections of the roof. This work is classified as a subcontract under NAICS code 238165, which pertains to roofing contractors, and is being managed by the Kentucky Finance Facilities/Support Service. The project requires precise execution to ensure the asphalt shingles provide both durability and an aesthetic resemblance to natural slate, meeting specified performance and appearance standards on targeted areas of the roof. The solicitation was posted on July 31, 2026, with a response deadline of August 14, 2026, at 5:30 PM, providing potential bidders a limited window to submit proposals. The place of performance is listed as “Other,” indicating the location is not publicly specified in the contract data, while no set-aside designation or point of contact information is provided. The official interface for further details and submission is accessible via the Kentucky state portal, though no additional details regarding funding, scope extent, or inspection protocols are included in the available data.

Finance Facilities/Support Svc

POSTED

DEADLINE

SBS Modified Bitumen Roofing InstallationThe contract entails the removal and replacement of an existing SBS Modified Bitumen roofing membrane with a new weather-tight roofing system to ensure long-term protection and integrity of the structure. The work is classified as a subcontract under NAICS code 238165, specifically for roofing contractors, and is managed by the Kentucky Finance Facilities/Support Service. The project is solicited with no set-aside designation, meaning any qualified contractor may bid, and the work is to be performed at an unspecified location identified only as "Other" within Kentucky. The solicitation was posted on July 31, 2026, with a firm response deadline of August 14, 2026, at 5:30 PM Eastern Time. All bids must be submitted through the Kentucky VSS eProcurement portal at the provided URL to be considered valid.

Finance Facilities/Support Svc

POSTED

DEADLINE

Roofing and Weatherproofing InstallationThe contract involves the installation of new roofing systems with a focus on comprehensive weatherproofing, including sealing all penetrations and applying sealants at perimeters to ensure continuous protection against moisture and environmental elements. Proper flashing and seamless transitions between roofing components are required to maintain structural integrity and long-term durability. The work must be executed to exacting standards that guarantee the building envelope remains watertight and resilient under varying weather conditions. This is a subcontract under NAICS code 238165, classified under the Housing agency in Arizona, with a response deadline of August 21, 2026. The solicitation was posted on July 30, 2026, and all performance is expected to occur at the designated site associated with the Arizona Housing authority. Although specific location details such as city or zip code are not provided, the scope mandates full compliance with industry best practices for roofing and weatherproofing, and all work must be completed by qualified contractors capable of delivering turnkey solutions that meet or exceed regulatory and safety benchmarks.

POSTED

DEADLINE

Small Business and DVBE Subcontracting ParticipationThis contract opportunity enables certified Small Businesses and Disabled Veteran Business Enterprises to serve as subcontractors on projects under the California Department of Water Resources, specifically targeting North American Industry Classification System code 238165, which relates to plumbing, heating, and air-conditioning contractors. The intent is to promote meaningful participation by these businesses in performing commercially useful functions that contribute directly to the work scope, allowing the prime contractor to qualify for bid preferences in future procurements. Participation is not a direct award but a structured pathway for SB and DVBE firms to establish subcontracting relationships that meet regulatory and compliance standards. The solicitation is open with a response deadline of August 19, 2026, and is accessible through the California eProcurement portal. While no specific project location or point of contact is provided, the opportunity is tied to state-funded initiatives managed by the California Department of Water Resources. Eligible businesses must be certified and prepared to demonstrate their ability to perform essential tasks with tangible, measurable contributions to the contract’s objectives. This structure supports broader state goals of fostering diversity in procurement and increasing economic engagement from underrepresented business communities.

California Department of Water Resources

POSTED

DEADLINE

Roof Replacement – Specialty Roofing ContractorThe contract involves the complete removal and replacement of an existing roof system under a subcontract for the California Department of Water Resources, with all new materials required to meet FM 1-90 wind uplift standards to ensure structural integrity under high-wind conditions. The scope includes installation of new flashing, insulation, and seamless integration with surrounding building systems to maintain weatherproofing and energy efficiency. The work must be performed by a qualified specialty roofing contractor, with the NAICS code 238165 indicating a focus on roof installing contractors. The solicitation was posted on July 28, 2026, and responses are due by August 19, 2026, at 10:00 PM. The contract is not subject to any specific set-aside classification, and the performance location is unspecified beyond being within California. The work is part of a broader institutional maintenance initiative, and while no point of contact is listed, bidders must adhere to the state procurement process through the Cal eProcure portal. All materials and labor must comply with mandated safety and performance benchmarks to ensure long-term durability and regulatory compliance.

California Department of Water Resources

POSTED

DEADLINE

More opportunities from North Carolina → Southwestern Community College

Same awarding agency

Project Safety and Site ManagementThe contract entails the development and implementation of a comprehensive safety plan aligned with OSHA 29 CFR 1926 standards, focusing on critical site hazards including fall protection systems, debris control, and magnetic sweeping to eliminate metallic contaminants. The scope requires detailed planning and execution to ensure worker safety and regulatory compliance across all operational phases, with particular emphasis on preventing injuries from falls and hazards associated with loose metal debris. The plan must be tailored to the specific conditions of the project location and integrated into daily site management protocols. This is a subcontract under NAICS code 541620, issued by Southwestern Community College in North Carolina, with a bid submission deadline of September 3, 2026. The solicitation was posted on August 5, 2026, and the contract is intended for a service provider capable of delivering professionally engineered safety solutions. While the precise worksite location is not specified, performance is expected to occur within the jurisdiction of North Carolina under the oversight of the requesting agency. Respondents must demonstrate technical expertise in occupational safety compliance, debris mitigation, and proven experience with industrial site safety systems.

Environmental Consulting Services

POSTED

DEADLINE

Decking Supply and Replacement (CDX Plywood)The contract entails the supply and replacement of 23,000 square feet of 5/8-inch CDX plywood decking, involving the removal of existing damaged sections and the installation of new material in full compliance with applicable building codes. All work must be executed to meet structural and safety standards, ensuring durability and proper integration with the existing deck system. The scope includes both material procurement and labor for complete removal and installation, with no allowance for substandard or non-compliant materials. This is a subcontract opportunity issued by Southwestern Community College in North Carolina, with a posted date of August 5, 2026, and a deadline for responses set for September 3, 2026, at 6:00 PM. The NAICS code 321911 indicates classification under other wood product manufacturing, affirming the focus on manufactured building materials. The place of performance and contact details are unspecified, but all work is expected to occur at the college’s facilities. Interested parties must submit proposals by the stated deadline to be considered for award.

Wood Window and Door Manufacturing

POSTED

DEADLINE

Roofing Material Supply (Asphalt Shingles and Membrane)The contract entails the supply of roofing materials totaling 18,000 square feet of asphalt shingles and 5,000 square feet of 60-mil single-ply membrane, inclusive of all necessary underlayment and fasteners required for proper installation. Delivery is specified as FOB Destination to a site in North Carolina, ensuring the vendor is responsible for transportation and associated costs until the materials reach the designated location. The solicitation is categorized as a subcontract under NAICS code 426110, indicating wholesale trade in building materials, and is issued by Southwestern Community College in North Carolina. The opportunity was posted on August 5, 2026, with a response deadline set for September 3, 2026, at 6:00 PM local time, allowing potential suppliers sufficient time to prepare and submit their proposals. No set-aside provisions or organizational type restrictions are specified, leaving the opportunity open to eligible contractors without preferential targeting.

POSTED

DEADLINE

Metal Flashing, Gutters, and Downspouts Fabrication & InstallationSouthwestern Community College in North Carolina is seeking a subcontractor to fabricate and install custom metal flashing, drip edge, gutters, and downspouts designed to integrate seamlessly with new roofing systems to ensure effective water diversion and structural protection. The work must meet precise compatibility standards for durability, performance, and aesthetic alignment with modern roofing materials, focusing on long-term water management and prevention of leaks or damage. The opportunity is open for bidding with a deadline for responses set for September 3, 2026, and falls under the NAICS code 238169 for other building completion contractors. Although specifics regarding location, contact information, and set-aside status are not provided, the contract is structured as a subcontract and requires full compliance with industry standards for materials and installation techniques. Interested parties are directed to the official solicitation portal for detailed technical requirements and submission protocols.

POSTED

DEADLINE

Southwestern Community College - Swain Center Roof

Solicitation # 125-2026-08-01

Southwestern Community College is soliciting proposals for the complete replacement of the roofing system at its Swain County campus facility in North Carolina, requiring vendors to furnish, deliver, install, and commission a high-performance roofing solution tailored to both steep-slope and low-slope configurations. The project demands durable, weather-resistant materials capable of withstanding regional environmental conditions while allowing flexibility in design and product selection to meet long-term performance standards. All work must be executed to ensure structural integrity, energy efficiency, and compliance with industry best practices for commercial roofing systems. Proposals must be submitted by September 3, 2026, at 6:00 PM Eastern Time, with the solicitation posted on August 5, 2026. The contract is issued under solicitation number 125-2026-08-01 through the North Carolina state procurement system, and responses should be directed to Joseph Waldrum as the primary point of contact. The location of performance is the college’s main campus facility in Swain County, North Carolina, and vendors are expected to demonstrate proven experience with similar large-scale roofing projects, including commissioning and warranty provisions. No specific set-aside or NAICS code is designated, and proposals should address comprehensive project delivery from initial removal of existing systems to final inspection and handover.

Roofing Contractors

POSTED

DEADLINE

HUB/Minority Business Subcontracting (Set-Aside Opportunity)Certified HUB, MBE, and WBE firms are invited to participate as subcontractors on a construction project under a set-aside opportunity with a target of 10% utilization by these certified businesses. The opportunity is tied to NAICS code 238220, indicating work in plumbing, heating, and air-conditioning contractor services, and is administered by Southwestern Community College in North Carolina. Interested firms must submit their responses by August 12, 2026, to be considered for inclusion in the subcontracting pool. While specific project details and performance locations are not outlined in the provided data, participation is open to qualified certified businesses seeking to engage in trades related to the project scope. The solicitation is posted on the North Carolina eProcurement platform for transparency and access.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Permitting & Code Compliance ManagementThe contract requires comprehensive permitting and code compliance management for HVAC system replacements across federal, state, and local jurisdictions, with a focus on adherence to the North Carolina Mechanical Code, Energy Conservation Code, and the Americans with Disabilities Act. The work involves navigating complex regulatory frameworks to secure all necessary approvals, ensuring that installations meet structural, safety, and accessibility standards while aligning with energy efficiency mandates. The subcontractor must demonstrate expertise in coordinating with multiple agencies, anticipating regulatory updates, and documenting compliance throughout the project lifecycle. The solicitation is posted under NAICS code 541690, indicating it pertains to other scientific and technical consulting services, and is issued by Southwestern Community College in North Carolina. Although no specific location or point of contact is provided, the work is expected to occur within the state, and responses must be submitted by August 12, 2026. The nature of the contract as a subcontract suggests it supports a larger initiative, and the successful bidder will need to operate with precision, diligence, and a strong understanding of institutional procurement protocols and building code enforcement practices in North Carolina.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Testing, Adjusting, and Balancing (TAB)The contract entails certified testing, adjusting, and balancing of HVAC systems to ensure optimal airflow and performance in accordance with ASHRAE Standard 111, requiring comprehensive compliance reporting to verify adherence to industry benchmarks. This subcontract focuses on the technical validation of HVAC system operation, with deliverables centered on documented performance data and certification of balance metrics to meet regulatory and operational standards. Issued by Southwestern Community College in North Carolina, the solicitation is classified under NAICS code 541350 for architectural and engineering services and is open for response until August 12, 2026. The work must be performed at an unspecified location within the state, and bidders are expected to possess the necessary expertise and certification to execute TAB services to the required professional standard. No set-aside designation or specific point of contact is provided, and interested parties must access the full solicitation through the provided web link for detailed submission requirements.

Building Inspection Services

POSTED

DEADLINE

Building Automation System (BAS) Controls IntegrationThe contract entails the supply, programming, and integration of building automation system controls for dedicated outdoor air systems, variable refrigerant flow systems, and indoor air quality management, encompassing all necessary sensors, controllers, and user interface components. The work requires thorough coordination to ensure seamless operation between these critical HVAC subsystems, with emphasis on energy efficiency, system reliability, and occupant comfort. All equipment must be compatible with existing infrastructure and capable of remote monitoring and adaptive control based on real-time environmental data. This subcontract is solicited by Southwestern Community College in North Carolina under NAICS code 238220, with a response deadline of August 12, 2026. The place of performance and specific location details are not specified, but the project is expected to support the college’s facility operations. No set-aside provisions are indicated, and the solicitation is open to eligible subcontractors who can demonstrate expertise in integrated building automation systems. Interested parties must submit proposals by the stated deadline through the provided online portal.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

HVAC Installation & Ductwork ConstructionThe contract involves the complete removal of existing HVAC systems and the installation of a new dedicated outdoor air system, variable refrigerant flow system, ductwork, and supporting structures, all executed in strict compliance with SMACNA standards and the North Carolina Mechanical Code. The work is scoped to ensure full integration and operational efficiency of the new systems while adhering to current building and safety regulations. All installation activities must be performed by qualified personnel using approved materials and methods to meet or exceed industry and state requirements. This subcontract is issued by Southwestern Community College through the state of North Carolina, with a response deadline of August 12, 2026, and a posted date of July 14, 2026. The project falls under NAICS code 238220 for HVAC installation services, and the place of performance is located within North Carolina, though specific city or zip details are not provided. Interested parties must submit proposals by the stated deadline to be considered for award, and all work must be completed in accordance with the technical specifications and regulatory frameworks governing mechanical systems in the state.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

DOAS & VRF Equipment SupplyThe contract involves the supply of certified Dedicated Outdoor Air Systems and Variable Refrigerant Flow systems, including all required components such as condensers, air handlers, and refrigerant piping, all of which must meet recognized industry standards including UL, NEC, ASME, and AGA. The equipment is intended for installation at facilities under the jurisdiction of Southwestern Community College in North Carolina, with compliance and performance specifications strictly enforced to ensure safety, efficiency, and regulatory alignment. All submissions must be delivered by the response deadline of August 12, 2026, and the contract is structured as a subcontract under NAICS code 333415, indicating focus on HVAC equipment manufacturing and supply. The solicitation was posted on July 14, 2026, and interested parties can access additional details through the official state procurement portal.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

DEADLINE