This Solicitation opportunity from Department Of Veterans Affairs was posted on July 29, 2020. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Audiology Booth

Awarded

36C25220Q0728Federal

Submission Closed08/10/2020, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334510

New

DIBBS

Supply of Digital Laboratory Timers (NSN 6640-01-508-9431)This subcontract involves the supply of specialized digital laboratory timers, identified by NSN 6640-01-508-9431, for prime contractors supporting the Department of Defense Medical Supply Chain. The required devices must feature a 100-minute count up and down capability, 0.01% accuracy, and extra-large four-digit LCD screens. Each unit must be equipped with a magnetic back, an easel stand, and spring fasteners to ensure versatility in laboratory settings. All deliverables must adhere to MIL-STD-2073-1E packaging requirements and Medical Marking Standard No. 1. The contract specifies that finished units are to be delivered FOB Destination to Kaiserslautern, Germany. This procurement falls under NAICS code 334510 and is managed by the Medical Supply Chain FSH.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Voltmeter Hardware Supplier

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Manufacture of Test Set SubassembliesThis subcontract involves the manufacture of one new Test Set Subassembly (NIIN: 013697791) for prime contractors supporting NAVSUP Weapon Systems Support projects under the Department of Defense. The scope of work includes fabricating subassemblies from raw materials, integrating electronic components according to technical drawings, and conducting quality conformance inspections and testing in accordance with DI-RELI-80322. The contractor must utilize precision electronic assembly tools and ensure full compliance with the Trade Agreements Act. This requirement falls under NAICS code 334510, with a response deadline set for November 27, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Hearing Aid Fitting and Verification for Shiprock Service Unit (IEE or ISBEE Set Aside)

Solicitation # SS-SRSU-27-0003

The Indian Health Service Shiprock Service Unit is conducting a sources-sought notice under solicitation SS-SRSU-27-0003 to identify capable providers for hearing aid fitting and verification equipment and services. The primary objective is to acquire technology that reduces hearing aid rejection and ensures optimal patient benefit, including the provision of installation and training for the Audiology Department. Technical requirements include dual ear capability, a comprehensive test suite featuring speechmap counseling and pediatric probe tube placement, and high measurement accuracy within a frequency range of 200 to 16,000 Hz. The equipment must feature a 12.1 inch LED backlit display and support calibrated speech, broadband noise, and tone bursts. This market research effort is categorized under NAICS code 334510 for electronic hearing aid manufacturing. The government is prioritizing responses from Indian-owned economic enterprises large or small under the Buy Indian Act, followed by other small business set-aside programs. Interested parties must be registered in the System for Award Management and submit a company profile, a capability statement, and the IHS IEE Representation Form by November 03, 2026. This notice is for market research purposes only and does not constitute a formal solicitation.

Navajo Area Indian Health Svc

POSTED

DEADLINE

AED 3 BLS EMS/FIRE PACKAGE, "ZOLL"

Solicitation # 232746

POSTED

DEADLINE

Supply of Visitor Counting SystemsThis subcontract involves the supply of specialized visitor counting hardware for prime contractors working on Forestry Commission forest projects. The scope of work focuses on providing measuring, checking, and testing equipment specifically designed for traffic-flow and visitor measurement within outdoor forest environments, adhering to CPV 34972000 standards. The selected provider will be responsible for delivering these visitor counter units directly to designated forest districts. The opportunity was posted on October 27, 2026, with a response deadline of November 23, 2026. Classified under NAICS code 334510, the contract is managed by the Forestry Commission. Interested parties can find further details through the official tender notice link provided in the procurement documentation.

POSTED

DEADLINE

Mobile CT Scanner Unit ProviderThis subcontract opportunity is for a provider to supply a fully equipped, transportable mobile CT trailer to support prime contractors on Department of Veterans Affairs medical projects in Longview, Texas. The required unit must not exceed 12 by 50 feet and must feature a 64-Slice CT Scanner, a hydraulic patient lift for wheelchair accessibility, and stairs equipped with double-sided handrails. The provider is responsible for delivering a fully operational unit that adheres strictly to ADA compliance and VHA Directive 1129 radiation protection standards. This procurement is managed under the Department of Veterans Affairs Network Contract Office 16, with a response deadline of November 2, 2026.

256-NETWORK Contract Office 16 (36C256)

POSTED

DEADLINE

6515--Notice of Intent to Award Sole Source - TEE PROBE TRANSDUCER

Solicitation # 36C24227Q0092

The Department of Veterans Affairs, specifically the Castle Point VA Medical Center in Wappingers Falls, New York, has issued a Notice of Intent to Award a sole source contract to Philips Healthcare for the procurement of one X8-2t Tee Probe Transducer upgrade, item number FUS8354. Market research indicated that Philips Healthcare is the only vendor capable of meeting the technical requirements for this specific equipment. The procurement falls under NAICS code 334510 for Electromedical and Electrotherapeutic Apparatus Manufacturing. The period of performance is established as eight weeks after the award. This notice is not a formal request for proposals or quotations, and no solicitation document currently exists. However, the government will consider Expressions of Interest from other capable sources to determine if a competitive procurement is warranted. Interested parties must submit detailed technical and pricing data to Sanchez Reid at [email hidden] by 4:00 PM EST on November 6, 2026. The government maintains full discretion over whether to proceed with the sole source award or initiate a competitive process based on the responses received.

242-NETWORK Contract Office 02 (36C242)

POSTED

DEADLINE

6515--ForeSite SS Tablet w/Pressure Mapping Sensor System

Solicitation # 36C24827Q0082

The Department of Veterans Affairs, through Network Contracting Office 8, is conducting market research via a Sources Sought Notice to identify authorized sources for the ForeSite SS Tablet Pressure Mapping System manufactured by ForeSite Medical. This effort is for acquisition planning purposes and is not a formal solicitation. The required system is intended for clinical pressure assessment and treatment and must include the tablet platform, pressure-mapping sensors, sensor packs, chargers, software licenses, cables, and all necessary accessories. Key functional requirements include real-time pressure analysis and visualization, patient data storage and reporting, wireless and wired connectivity, and portable battery-powered operation. All equipment must be new and include the manufacturer's standard warranty. Interested vendors must submit electronic responses in PDF or Word format by October 30, 2026. Submissions must include the company name, address, Unique Entity Identifier, point of contact, and business size or socioeconomic status, such as SDVOSB, VOSB, Small Business, or Large Business. Additionally, respondents must provide documentation proving they are authorized to distribute or resell the ForeSite system, an estimated delivery lead time, and confirmation regarding the new condition and warranty of the product. The place of performance is located in Tampa, Florida, under NAICS code 334510.

248-NETWORK Contract Office 8 (36C248)

POSTED

DEADLINE

Solicitation # W91CRB-26-AWSP-Scanner-Ultrasonic-Ocular-RPP

The Portfolio Acquisition Executive Maneuver Ground Project Manager Maneuver Medical Systems is soliciting prototype proposals for a Scanner Ultrasonic Ocular device under Other Transaction Authority pursuant to 10 U.S.C. 4022. The objective is to award two prototype agreements for the delivery and demonstration of FDA-approved commercial solutions that provide anatomical visualization and diagnostic imaging of the eye, specifically for the anterior and posterior segments. Awardees are required to deliver four prototype units within 45 to 60 days of award for operational and environmental testing conducted in accordance with MIL-STD-810H. The estimated period of performance is twelve months, with awards expected around the first quarter of fiscal year 2027. The procurement utilizes a comparative best-value methodology, prioritizing technical approach, performance compliance, reliability, schedule realism, and past performance over cost. Key requirements include Trade Agreements Act compliance, MIL-STD-130N marking for hardware, and the provision of ruggedized transport cases. Deliverables encompass the hardware units, comprehensive user and maintenance manuals, cybersecurity documentation, and on-site operator training. Proposals must be submitted as four separate PDF volumes via DoD SAFE or secure email by November 12, 2026. This action is a direct Other Transaction Agreement and is not subject to the Federal Acquisition Regulation or Defense Federal Acquisition Regulation Supplement.

POSTED

DEADLINE

Supplier of Disposable Adult Electrode Pads for AED G3 PROThis subcontract involves the supply of disposable adult electrode pads for the AED G3 PRO, specifically matching NSN 6515-01-613-1594, to support prime contractors under DLA Troop Support Medical Supply Chain contracts. The Department of Defense requires that all products comply with FDA regulations and maintain a minimum shelf life of 24 months. Deliveries consist of one pair of pads shipped FOB Destination to Fort Bragg, North Carolina. All units must be packaged according to ASTM D3951 and DLA RP001 standards, with marking adhering to Medical Marking Standard No. 1. The opportunity falls under NAICS code 334510, with a response deadline of November 2, 2026.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

WatchPat Sleep Monitoring Device SupplierThis subcontract involves the manufacture and supply of proprietary WatchPat One sleep monitoring hardware for the Department of Veterans Affairs Sleep Lab Department. The supplier is responsible for delivering these physical medical devices to either the prime contractor or the end-user, ensuring all hardware meets strict VA medical equipment standards and maintains necessary FDA approval. Managed under the Department of Veterans Affairs Network Contract Office 10, the agreement falls under NAICS code 334510. The procurement process includes a brief response window, with a posted date of October 26, 2026, and a deadline for responses by October 29, 2026.

250-NETWORK Contract Office 10 (36C250)

POSTED

3 days ago

DEADLINE

in about 9 hours

General Info

Agency

Department Of Veterans Affairs → 252-NETWORK Contract Office 12 (36C252)

Contract Value

$27,495

NAICS

334510 - Electromedical and Electrotherapeutic Apparatus Manufacturing

Place of Performance

La Crosse, WI, USA

Set-Aside

SBA

Awardee

J. W. MANNY INC.

Award Issued Date

10/01/2020, 12:00:00 AM UTC

Documents

S02+-+36C25220Q0728+-Solicitation+Small+Business.docx

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded

PostedJul 28

Presolicitation

Type ChangedJul 29

Presolicitation → Solicitation

AwardedOct 1

Contract was awarded

Submission Closed

08/10/2020, 06:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Veterans Affairs → 252-NETWORK Contract Office 12 (36C252)

Contacts1 person available

OfficeMILWAUKEE, WI, 53214, USA

Organization / AgencyDepartment Of Veterans Affairs → 252-NETWORK Contract Office 12 (36C252)

Office AddressMILWAUKEE, WI, 53214, USA

Contacts

Christopher Rodriguez

contact@example.gov

+1 (555) 000-0000

Full Description

Provide, install and certify for ambient noise, one (1) new, modular, single wall, (Type II), audiometric testing room, with a 4" minimum thick, integral sound rated floor system and all required assemblies, that meets all ANSI (American National Standards Institute) S3.1 "Maximum Permissible Ambient Noise Levels for Audiometric Test Rooms" requirements and that meets the following criteria; - Assembled room shall fit in a pre-cast concrete pit, installed by others, with a one-inch space around all vertical room surfaces, that has the following dimensions; 120 5/8" wide by 109 5/8" long with a depth of 7". - Integral floor system shall have RD-3, green, isolators installed on testing room floor assembly to isolate the booth from the floor of the existing concrete pit. - Audiometric testing room shall have one (1) right hand swinging door, with a 42" wide x 73" tall minimum clear opening. Door shall swing outward and shall be located on the right side of the front elevation of the testing booth. Door shall have a deadbolt, keyed lock. - Audiometric testing room integral ceiling panels shall have one (1) 3" diameter, fire sprinkler head access hole installed. Access hole shall be as centrally located within the assembled testing room as possible. Sprinkler head and related piping installed by others. - Audiometric testing room integral ceiling panels shall have two (2) 8" diameter, one (1) each, static intake and exhaust HVAC ceiling silencers with collars. All HVAC connections by others. - Audiometric testing room shall have one (1) 24" wide by 30" tall, 1/4" double glazed, acoustic, one-way glass window installed on the rear elevation. - Audiometric testing room shall have one (1) jack panel for clinical audiometric connections. Jack panel shall be located on the left elevation of testing booth and shall have a minimum of twelve (12) 1/4" phone jacks, two (2) USB (Universal Serial Bus) ports and one (1) 1" pass-through port/opening. - Audiometric testing room shall have all LED lighting, interior to the booth with integral light switch located adjacent to the testing booth door. - Interior of the audiometric testing room shall have carpet flooring. - Audiometric testing room shall have five (5) duplex electrical outlets installed. Three (3) duplex outlets on the interior of the booth, spaced evenly and two (2) on the exterior. Exterior electrical outlets shall be installed on the left elevation of the booth and adjacent to the the jack panel. - Audiometric testing room shall have three (3) double-duplex electrical outlets installed. Two (2) double-duplex outlets on the interior of the booth, spaced evenly and one (1) on the exterior. Exterior electrical outlets shall be installed on the left elevation of the booth and adjacent to the jack panel. - Audiometric testing room electrical system and components shall be UL (Underwriters Laboratory) listed and NEC (National Electric Code) compliant and shall be rated for 120v, 20a, 60Hz, and shall be installed per the most current NEC. - Audiometric testing room shall include three (3) empty utility box's, each with pull wire installed. One (1) utility box shall be for a fire alarm strobe, one (1) utility box shall be for a thermostat and one (1) utility box shall be for data connections. Fire alarm strobe and thermostat connections and components shall be VA provided and installed by others. - Provide one (1) each, audiometric testing room Operators manual and Service manual. Provide, install and certify for ambient noise, one (1) new, modular, single wall, (Type II), audiometric testing room, with a 4" minimum thick, integral sound rated floor system and all required assemblies, that meets all ANSI (American National Standards Institute) S3.1 "Maximum Permissible Ambient Noise Levels for Audiometric Test Rooms" requirements and that meets the following criteria; - Assembled room shall fit in a pre-cast concrete pit, installed by others, with a one-inch space around all vertical room surfaces, that has the following dimensions; 120 5/8" wide by 109 5/8" long with a depth of 7". - Integral floor system shall have RD-3, green, isolators installed on testing room floor assembly to isolate the booth from the floor of the existing concrete pit. - Audiometric testing room shall have one (1) right hand swinging door, with a 42" wide x 73" tall minimum clear opening. Door shall swing outward and shall be located on the right side of the front elevation of the testing booth. Door shall have a deadbolt, keyed lock. - Audiometric testing room integral ceiling panels shall have one (1) 3" diameter, fire sprinkler head access hole installed. Access hole shall be as centrally located within the assembled testing room as possible. Sprinkler head and related piping installed by others. - Audiometric testing room integral ceiling panels shall have two (2) 8" diameter, one (1) each, static intake and exhaust HVAC ceiling silencers with collars. All HVAC connections by others. - Audiometric testing room shall have one (1) 24" wide by 30" tall, 1/4" double glazed, acoustic, one-way glass window installed on the rear elevation. - Audiometric testing room shall have one (1) jack panel for clinical audiometric connections. Jack panel shall be located on the left elevation of testing booth and shall have a minimum of twelve (12) 1/4" phone jacks, two (2) USB (Universal Serial Bus) ports and one (1) 1" pass-through port/opening. - Audiometric testing room shall have all LED lighting, interior to the booth with integral light switch located adjacent to the testing booth door. - Interior of the audiometric testing room shall have carpet flooring. - Audiometric testing room shall have five (5) duplex electrical outlets installed. Three (3) duplex outlets on the interior of the booth, spaced evenly and two (2) on the exterior. Exterior electrical outlets shall be installed on the left elevation of the booth and adjacent to the the jack panel. - Audiometric testing room shall have three (3) double-duplex electrical outlets installed. Two (2) double-duplex outlets on the interior of the booth, spaced evenly and one (1) on the exterior. Exterior electrical outlets shall be installed on the left elevation of the booth and adjacent to the jack panel. - Audiometric testing room electrical system and components shall be UL (Underwriters Laboratory) listed and NEC (National Electric Code) compliant and shall be rated for 120v, 20a, 60Hz, and shall be installed per the most current NEC. - Audiometric testing room shall include three (3) empty utility box's, each with pull wire installed. One (1) utility box shall be for a fire alarm strobe, one (1) utility box shall be for a thermostat and one (1) utility box shall be for data connections. Fire alarm strobe and thermostat connections and components shall be VA provided and installed by others. - Provide one (1) each, audiometric testing room Operators manual and Service manual. Provide, install and certify for ambient noise, one (1) new, modular, single wall, (Type II), audiometric testing room, with a 4" minimum thick, integral sound rated floor system and all required assemblies, that meets all ANSI (American National Standards Institute) S3.1 "Maximum Permissible Ambient Noise Levels for Audiometric Test Rooms" requirements and that meets the following criteria; - Assembled room shall fit in a pre-cast concrete pit, installed by others, with a one-inch space around all vertical room surfaces, that has the following dimensions; 120 5/8" wide by 109 5/8" long with a depth of 7". - Integral floor system shall have RD-3, green, isolators installed on testing room floor assembly to isolate the booth from the floor of the existing concrete pit. - Audiometric testing room shall have one (1) right hand swinging door, with a 42" wide x 73" tall minimum clear opening. Door shall swing outward and shall be located on the right side of the front elevation of the testing booth. Door shall have a deadbolt, keyed lock. - Audiometric testing room integral ceiling panels shall have one (1) 3" diameter, fire sprinkler head access hole installed. Access hole shall be as centrally located within the assembled testing room as possible. Sprinkler head and related piping installed by others. - Audiometric testing room integral ceiling panels shall have two (2) 8" diameter, one (1) each, static intake and exhaust HVAC ceiling silencers with collars. All HVAC connections by others. - Audiometric testing room shall have one (1) 24" wide by 30" tall, 1/4" double glazed, acoustic, one-way glass window installed on the rear elevation. - Audiometric testing room shall have one (1) jack panel for clinical audiometric connections. Jack panel shall be located on the left elevation of testing booth and shall have a minimum of twelve (12) 1/4" phone jacks, two (2) USB (Universal Serial Bus) ports and one (1) 1" pass-through port/opening. - Audiometric testing room shall have all LED lighting, interior to the booth with integral light switch located adjacent to the testing booth door. - Interior of the audiometric testing room shall have carpet flooring. - Audiometric testing room shall have five (5) duplex electrical outlets installed. Three (3) duplex outlets on the interior of the booth, spaced evenly and two (2) on the exterior. Exterior electrical outlets shall be installed on the left elevation of the booth and adjacent to the the jack panel. - Audiometric testing room shall have three (3) double-duplex electrical outlets installed. Two (2) double-duplex outlets on the interior of the booth, spaced evenly and one (1) on the exterior. Exterior electrical outlets shall be installed on the left elevation of the booth and adjacent to the jack panel. - Audiometric testing room electrical system and components shall be UL (Underwriters Laboratory) listed and NEC (National Electric Code) compliant and shall be rated for 120v, 20a, 60Hz, and shall be installed per the most current NEC. - Audiometric testing room shall include three (3) empty utility box's, each with pull wire installed. One (1) utility box shall be for a fire alarm strobe, one (1) utility box shall be for a thermostat and one (1) utility box shall be for data connections. Fire alarm strobe and thermostat connections and components shall be VA provided and installed by others. - Provide one (1) each, audiometric testing room Operators manual and Service manual. Provide, install and certify for ambient noise, one (1) new, modular, single wall, (Type II), audiometric testing room, with a 4" minimum thick, integral sound rated floor system and all required assemblies, that meets all ANSI (American National Standards Institute) S3.1 "Maximum Permissible Ambient Noise Levels for Audiometric Test Rooms" requirements and that meets the following criteria; - Assembled room shall fit in a pre-cast concrete pit, installed by others, with a one-inch space around all vertical room surfaces, that has the following dimensions; 120 5/8" wide by 109 5/8" long with a depth of 7". - Integral floor system shall have RD-3, green, isolators installed on testing room floor assembly to isolate the booth from the floor of the existing concrete pit. - Audiometric testing room shall have one (1) right hand swinging door, with a 42" wide x 73" tall minimum clear opening. Door shall swing outward and shall be located on the right side of the front elevation of the testing booth. Door shall have a deadbolt, keyed lock. - Audiometric testing room integral ceiling panels shall have one (1) 3" diameter, fire sprinkler head access hole installed. Access hole shall be as centrally located within the assembled testing room as possible. Sprinkler head and related piping installed by others. - Audiometric testing room integral ceiling panels shall have two (2) 8" diameter, one (1) each, static intake and exhaust HVAC ceiling silencers with collars. All HVAC connections by others. - Audiometric testing room shall have one (1) 24" wide by 30" tall, 1/4" double glazed, acoustic, one-way glass window installed on the rear elevation. - Audiometric testing room shall have one (1) jack panel for clinical audiometric connections. Jack panel shall be located on the left elevation of testing booth and shall have a minimum of twelve (12) 1/4" phone jacks, two (2) USB (Universal Serial Bus) ports and one (1) 1" pass-through port/opening. - Audiometric testing room shall have all LED lighting, interior to the booth with integral light switch located adjacent to the testing booth door. - Interior of the audiometric testing room shall have carpet flooring. - Audiometric testing room shall have five (5) duplex electrical outlets installed. Three (3) duplex outlets on the interior of the booth, spaced evenly and two (2) on the exterior. Exterior electrical outlets shall be installed on the left elevation of the booth and adjacent to the the jack panel. - Audiometric testing room shall have three (3) double-duplex electrical outlets installed. Two (2) double-duplex outlets on the interior of the booth, spaced evenly and one (1) on the exterior. Exterior electrical outlets shall be installed on the left elevation of the booth and adjacent to the jack panel. - Audiometric testing room electrical system and components shall be UL (Underwriters Laboratory) listed and NEC (National Electric Code) compliant and shall be rated for 120v, 20a, 60Hz, and shall be installed per the most current NEC. - Audiometric testing room shall include three (3) empty utility box's, each with pull wire installed. One (1) utility box shall be for a fire alarm strobe, one (1) utility box shall be for a thermostat and one (1) utility box shall be for data connections. Fire alarm strobe and thermostat connections and components shall be VA provided and installed by others. - Provide one (1) each, audiometric testing room Operators manual and Service manual.