Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Combined Synopsis/Solicitation opportunity from National Aeronautics And Space Administration was posted on July 9, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Auma Assembly Hardware

Awarded
80NSSC26935320QFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333998
New
SLED
VIB-C ICF-65 Mattress Filling Machine
Solicitation # 130809
The Commonwealth of Virginia Department for the Blind and Vision Impaired is soliciting competitive sealed bids for a spot purchase of one ICF-65 Mattress Filling Machine for its Charlottesville plant. The machine must be designed for filling foam or spring core mattresses, featuring a maximum width of 62 inches, an operating speed of 30 feet per minute, and an operating height of 40 inches. Technical requirements include eight sets of chain conveyors with manual width adjustment, a piece counter with key reset, and Allen Bradley Micro Logix PLC with UL listed controls. The unit must operate on a 208/220 VAC 40 AMP 3 PH power supply and include a manual/auto foot switch with auto indexing. The contract will be awarded to the lowest responsive and responsible bidder, with award priority given to DSBSD-certified micro or small businesses, including women-owned and minority-owned firms. Bidders must submit their electronic bids via the eVA portal by November 6, 2026, including a completed vendor data sheet, state corporation form, small business subcontracting plan, price schedule, and machine diagram. All-inclusive pricing must cover the equipment, delivery, freight, and installation. The machine must be delivered to 1102 Monticello Rd, Charlottesville, VA, and be fully operational by December 15, 2026. Final acceptance is contingent upon a successful operational demonstration to the owner's representative.
Department of Blind and Vision Impaired

POSTED

about 15 hours ago

DEADLINE

in 9 days

AI Contract Overview

Show more

NASA/NSSC is procuring Auma Assembly Hardware on a sole source basis from AUMA ACTUATORS, INC, located in Canonsburg, Pennsylvania, under FAR 12.102(a), as the company is the only available supplier of this specific hardware. The acquisition will be conducted as a commercial item procurement under FAR Part 12, with performance taking place at the NASA Stennis Space Center in Mississippi. The North American Industry Classification System code for this procurement is 333998. Interested parties may submit written capabilities and qualifications to the designated point of contact by 4:00 p.m. Central Standard Time on July 13, 2026, solely to assist the government in determining whether competition is feasible; however, the decision to proceed without competition rests entirely with the government. Oral communications are not permitted in response to this notice, and the NASA FAR Supplement Clause 1852.215-84 on the Ombudsman applies, with resources available through the official NASA procurement ombudsman listing. The primary point of contact for this solicitation is Tracy Bremer, a Procurement Specialist, reachable via email at [email hidden].

General Info

NASA sole-sources Auma Assembly Hardware from AUMA ACTUATORS, INC for Stennis Space Center under FAR Part 12.

Contract Value

$188,784

NAICS

333998 - All Other Miscellaneous General Purpose Machinery Manufacturing

Place of Performance

Stennis Space Center, MS, 39529, USA

Set-Aside

NONE

Award Issued Date

Documents

1

SOW for Auma Assembly Hardware Acquisition at NASA SSC

PDF, High priority: read this firstsow
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseAwarded
Posted

Combined Synopsis

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyNational Aeronautics And Space Administration → NASA Shared Services Center
Contacts1 person available
OfficeSTENNIS SPACE CENTER, MS, 39529, USA
Office AddressSTENNIS SPACE CENTER, MS, 39529, USA
Contacts

Full Description

Show more

NASA/NSSC has a requirement for Auma Assembly Hardware.
NASA/NSSC intends to issue a sole source contract to AUMA ACTUATORS, INC, 100 Southpointe BLVD,
Canonsburg, Pennsylvania 15317-9559 under the authority of FAR 12.102(a). It has been determined that
AUMA ACTUATORS, INC is the sole provider of Auma Assembly Hardware.
NASA/NSSC will be the procuring center for this effort. Performance will be located at NASA/ Stennis Space
Center (SSC).
The Government intends to acquire Commercial items or services using the provisions, clauses and procedures
prescribed in FAR Part 12 for Commercial
The NAICS Code for this procurement is 333998.
Interested organizations may submit their capabilities and qualifications to perform the effort in writing to the
identified point of contact not later than 4:00 p.m. Central Standard Time on 7/13/2026. Such
capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this
procurement on a competitive basis. A determination by the Government not to compete this proposed effort on
a full and open competition basis, based upon responses to this notice, is solely within the discretion of the
government.
Oral communications are not acceptable in response to this notice.
NASA FAR Supplement Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this
acquisition can be found at https://www.hq.nasa.gov/office/procurement/regs/Procurement-Ombuds-Comp-
Advocate-Listing.pdf .
Primary Point of Contact:
Tracy Bremer
Procurement Specialist
contact@example.gov

More opportunities from National Aeronautics And Space Administration → NASA Shared Services Center

Same awarding agency

NAICS: 334519
New
Federal
Transient hot wire liquid thermal conductivity meter to support material compatibility and property testing for explosive materials.
Solicitation # 80NSSC27946410Q
NASA Shared Services Center is seeking a transient hot wire liquid thermal conductivity meter to support material compatibility and property testing for explosive materials, specifically to advance the understanding of low-toxicity monopropellants. The requirement is for a Thermtest THW-L1S unit capable of measuring thermal conductivity, thermal diffusivity, and volumetric specific heat of liquids and phase change materials. Technical specifications include a temperature range of at least -50C to 200C, ASCENT compatible wetted surfaces, the ability to measure samples across a range of viscosity, and integration capabilities for an external chiller or heater unit. Performance will take place at Lab 105E in Building 4205 at the Marshall Space Flight Center, with testing scheduled to begin in the winter of 2026. This procurement is being conducted under NAICS code 334519 as a commercial item acquisition following FAR Part 12. NASA intends to issue a sole source contract to Thermtest Inc, as they have been determined to be the sole provider of the required equipment. This notice is currently a request for capability statements rather than price quotes to determine if the procurement can be conducted on a competitive basis. Interested organizations must submit their qualifications to the identified points of contact by 8:00 a.m. CST on October 30, 2026. All submissions must reference the notice ID, and oral communications are not permitted.
Other Measuring and Controlling Device Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 541512
New
Federal
Vision Technologies Installation Services KSC
Solicitation # 80NSSC26946930Q
The NASA Shared Services Center is seeking to award a sole source contract to Vision Technologies, LLC for the installation of cellular Distributed Antenna System (DAS) services at the NASA Kennedy Space Center, specifically for the K6 B2496 building. This procurement, categorized under NAICS code 541512, is intended as an 8(a) sole source acquisition under FAR 12.102(a) for commercial items and services. The scope of work involves providing materials, project management, and engineering services to establish LTE and NR cellular coverage. Vision Technologies will be responsible for designing the system to industry standards, procuring DAS materials, and installing head end and active equipment, while cabling and antenna installation will be handled by others. The contractor is required to configure, test, commission, and monitor the system to ensure proper operation with a live signal. Key deliverables include submittal drawings, antenna placement locations, testing methodology, and comprehensive close-out documentation consisting of as-built information, firmware revisions, equipment serial numbers, and warranty documentation. Final acceptance is contingent upon a verification test and validation survey once the system is operational. Interested organizations were requested to submit capability statements by October 30, 2026, to determine if the procurement should be conducted on a competitive basis.
Computer Systems Design Services

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334519
New
Federal
Yateks 3D video borescope system
Solicitation # 80NSSC27946179Q
Solicitation 80NSSC27946179Q is a firm-fixed-price contract opportunity issued by the NASA Shared Services Center for the procurement of a Yateks 3D video borescope system for the Goddard Space Flight Center. This is a brand-name requirement specifically for the Yateks Realta 3D system, which includes the iShot Imaging E Series Monitor Kit (PN: EM10418). The system was selected for its specialized capabilities, including motorized 360-degree articulation, forward-facing stereo 3D measurement, and full-HD imaging. The procurement is set aside for small businesses under NAICS code 334519, with delivery expected within one to two weeks after receipt of order. Shipping is FOB Destination to Greenbelt, Maryland. The award will be granted based on the lowest price technically acceptable (LPTA) criteria. To be eligible, responses must be submitted by authorized resellers only and must include a letter of authorization and proof of manufacturer pricing. Offerors must be registered in the System for Award Management (SAM) and include their CAGE code or Unique Entity ID on the proposal. All quotes are due by October 22, 2026, and must be submitted via email to Cody Guidry. The contract includes specific requirements for duty-free entry marking and strict compliance with U.S. export control laws, including ITAR and EAR regulations.
Other Measuring and Controlling Device Manufacturing

POSTED

about 23 hours ago

DEADLINE

in about 9 hours
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS