This Combined Synopsis/Solicitation opportunity from Department Of Agriculture was posted on April 22, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Autonomous Liquid Dairy Manure Applicator

Closed

1232SA26Q0522Federal

Submission Closed05/08/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333111

New

International

New Ryetec Contractor Flail Mower Collector C2200CHS Super

Solicitation # ocds-h6vhtk-06f86e

Natural England is procuring a new Ryetec Contractor Flail Mower Collector C2200CHS Super, with an estimated value of 30,000 pounds excluding VAT. The equipment must include a PTO shaft and guard, a front feeder plate, and a volume reduction bar, and it must be fully compatible with a Valtra N135EA tractor. The contract encompasses the supply, delivery, installation, commissioning, and operator familiarisation at Arne Farm in Wareham, Dorset, with a delivery deadline on or before December 11, 2026. The supplier is also required to provide ongoing servicing, warranty support, maintenance, spare parts, and technical assistance, while ensuring the machinery complies with all current UK health and safety legislation and standards. The contract will be awarded based on the most advantageous tender, using a weighted scoring system consisting of 60 percent technical evaluation and 40 percent commercial cost. Technical criteria focus on supply capability, delivery, support services, and health and safety compliance. The agreement includes a contractor liability cap of 5 million pounds and requires strict adherence to the General Data Protection Regulations 2018. The procurement process is reserved for UK suppliers, with a particular suitability for SMEs, and requires bidders to certify they are free from mandatory exclusion grounds.

POSTED

DEADLINE

01913-261023-B Small Plot Fertilizer Spreader

Solicitation # WS5694507367

Agriculture and Agri-Food Canada's Charlottetown Research and Development Center is seeking the supply and delivery of one small plot fertilizer spreader. This solicitation, numbered WS5694507367, is open exclusively to Canadian suppliers and is a reissue that cancels and supersedes the previous solicitation from May 14, 2026. The response deadline is September 23, 2026, at 19:00 UTC, with the place of performance located in Prince Edward Island. Offerors who participated in the previous solicitation may request a debriefing or feedback session, and all current bidders may request a debriefing on the results of the process.

Department of Public Works and Government Services

POSTED

DEADLINE

Telehandler Equipment Supplier

St. Lawrence Parks Commission

POSTED

DEADLINE

Supply of Transmission Converter Housings (NSN 2520013610592)

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Supplier of Electrical-Electronic Component Oven

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Farm Machinery Planter

Solicitation # 12319826Q5018

The USDA Food and Nutrition Administration, on behalf of the Agricultural Research Service, is soliciting quotes for the acquisition of a high-capacity farm machinery planter to support soil research in Brookings, South Dakota. The requirement is for a John Deere 1745 Planter or an equal product that meets specific technical requirements, including mechanical transmission seed drive, 1.6 bushel seed hoppers, and two 150-gallon liquid fertilizer tanks with piston pumps and single disk openers. The contract is a 100 percent small business set-aside under NAICS code 333111 and will be awarded as a firm-fixed-price purchase order based on the lowest priced technically acceptable offer. The scope of work includes the delivery and assembly of the new planter at no additional cost, as well as the appraisal and trade-in of an existing 1989 John Deere 7200 Planter. Awardees must provide a one-year warranty and a manufacturer's certificate of origin for the equipment. Proposals must be submitted in two separate volumes, technical and price, by September 14, 2026. The contractor is required to be active in the System for Award Management and must comply with all applicable OSHA regulations and federal anti-discrimination laws.

USDA Food And Nutrition Administration

POSTED

DEADLINE

SPRAYER, PESTICIDE, S

Solicitation # SPE4A0-26-T-4757

This solicitation, issued by the Department of Defense Aviation Supply Chain ESOC Buys under solicitation number SPE4A0-26-T-4757, is for the procurement of one skid-mounted pesticide sprayer. The required equipment is identified as part number DYNAJET L-30, manufactured by Curtis Dyna-Fog Ltd under CAGE code 82254, with NSN 3740-01-495-0914. The contractor is required to provide one unit along with a comprehensive manufacturer's commercial manual covering operation, services, maintenance, and repair. The contract falls under NAICS code 333111 and specifies a delivery timeline of five days after receipt of order, with the place of performance located at Camp Pendleton, California. Key compliance requirements include adherence to DLA packaging standards and the removal of government identification from any non-accepted supplies. Item Unique Identification is not required per the service customer's request. The solicitation was posted on September 9, 2026, with a response deadline of September 17, 2026, and is subject to the DLA Master List of Technical and Quality Requirements.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Supply of New No-Till Grain Drill

POSTED

DEADLINE

Solicitation # 1240LP26Q0174

Solicitation number 1240LP26Q0174 is a request for quotations issued by the Department of Agriculture for the purchase of a 20-foot flail mower and a smaller orchard flail mower. This acquisition is a total small business set-aside under NAICS code 333111, with a size standard of 1,250 employees. Interested parties must submit questions by September 14, 2026, and final quotations are due by September 18, 2026, to Westley Bisson. The required delivery timeframe is 60 calendar days following the receipt of the award, though early deliveries are permitted.

Csa Intermountain 4 Usda-Fs

POSTED

DEADLINE

Secondary Tillage Disk

Solicitation # 12444326Q0078

Solicitation number 12444326Q0078 is a combined synopsis and request for quotation issued by the Department of Agriculture, specifically the USDA-FS CSA East office in Atlanta, Georgia. The contract is for the procurement of a secondary tillage disk that must adhere to specific technical requirements, including dimensions, blade counts, gang angles, conditioner reels, and safety features. This acquisition is a total small business set-aside under NAICS code 333111 for Farm Machinery and Equipment Manufacturing, with a size standard of 1,250 employees. The place of performance for this contract is located in Booneville, Arkansas. Interested offerors must be registered in the System for Award Management at the time of offer and award. Submissions must include a technical plan and a price quote, with the response deadline set for September 21, 2026, at 17:00. The primary point of contact for this solicitation is Carrie L Edwards.

POSTED

DEADLINE

Commercial Mowers for Bay Pines VA Health Care System

Solicitation # 36C24826Q1118

The Department of Veterans Affairs is soliciting bids for commercial front mowers for the Bay Pines VA Healthcare System located in Bay Pines, Florida. This procurement is designated as a 100 percent total small business set-aside under NAICS code 333111 for farm machinery and equipment manufacturing. To be eligible for consideration, all vendors must be properly registered in the System Award Management database. The solicitation, identified by number 36C24826Q1118, was posted on September 9, 2026, with a response deadline of September 16, 2026, at 2:00 PM. Interested small business sources should direct inquiries to the primary point of contact, Cindy B Smith, and ensure all submissions comply with the commercial product guidelines specified in the announcement.

248-NETWORK Contract Office 8 (36C248)

POSTED

DEADLINE

Ag-Bag T700 Pull-Type Forage Bagger

Solicitation # 1284LM26Q0138

The Department of Agriculture, specifically the Csa Intermountain 2 Usda-Fs, is soliciting quotes for the purchase of an Ag-Bag T7060 Pull-Type Forage Bagger under solicitation number 1284LM26Q0138. This procurement is designated as a 100 percent small business set-aside, and small business resellers are permitted to submit quotes. The place of performance for this equipment is located in Mississippi. All interested parties must submit their quotes to Sarah Cotton via email at sarah.cotton@usda.gov. The deadline for submission is September 18th by 5:00 pm EST. This opportunity falls under NAICS code 333111 and is managed by the office located in Ogden, Utah.

Csa Intermountain 2 Usda-Fs

POSTED

3 days ago

DEADLINE

in 7 days

AI Contract Overview

The contract seeks the procurement of an Autonomous Liquid Dairy Manure Applicator, intended to enhance manure application efficiency for the Department of Agriculture. It is a combined type of contract with a total small business set-aside under SBA guidelines, specifically aligned with NAICS code 333111, which pertains to agricultural machinery manufacturing. The solicitation was posted on April 22, 2026, with responses due by May 8, 2026. The work will be performed in Stratford, Wisconsin, while the administering office is located in Beltsville, Maryland. The USDA Agricultural Research Service, Agricultural Field Management, Application and Precision Delivery office is the contracting agency overseeing this procurement. The contract emphasizes engagement with small businesses per FAR 19.5 requirements. Interested vendors can contact the primary point person, Lynn Hults, for further inquiries. Additional details and solicitation documents are accessible through the official government procurement portal.