Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Autonomous Swarm Tactics Development

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract titled Autonomous Swarm Tactics Development seeks to advance AI and machine learning technologies for the coordinated operation of unmanned systems in contested environments, focusing on intelligence, surveillance, reconnaissance, electronic warfare, and kinetic missions. The effort aims to develop autonomous control systems that enable swarms of unmanned platforms to operate collaboratively without centralized command, adapting dynamically to threats, communication limitations, and environmental constraints. The technical scope emphasizes real-time decision making, resilient communications, and mission adaptability under denied or degraded conditions where traditional navigation and coordination methods are ineffective. This subcontract under the Department of Defense, managed by the Naval Special Warfare Command, targets a deadline of December 31, 2026, with performance centered in the 92155 ZIP code area. The NAICS code 541512 identifies it as computer systems design and related services, indicating a focus on software and algorithmic development over hardware manufacturing. The work is intended to support next-generation tactical capabilities for special operations forces operating in high-risk, high-denial theaters, requiring innovations in swarm autonomy, sensor fusion, and adaptive mission planning that operate independently of external infrastructure or real-time human intervention.

General Info

Develop AI-based swarm control systems for unmanned ISR and combat missions in contested environments.

Agency

Department Of Defense → Naval Special Warfare CommandView Agency

NAICS

541512 - Computer Systems Design ServicesView NAICS

Place of Performance

CA, 92155, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Naval Special Warfare Command
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → Naval Special Warfare Command
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Development of AI/ML-driven software and control systems enabling coordinated swarm behavior among UxS platforms for ISR, electronic warfare, or kinetic missions in denied environments.

Similar Contracts

Same NAICS industry code

NAICS: 541512
New
DIBBS
Cybersecurity and CUI Safeguarding ComplianceThe contract requires implementation of NIST SP 800-171 security controls to safeguard Controlled Unclassified Information across all systems and processes under the subcontract. Compliance with these controls is mandatory to ensure the confidentiality, integrity, and availability of sensitive data handled in support of Department of Defense operations. The subcontractor must establish and maintain a robust cybersecurity posture aligned with the NIST framework, including access controls, audit logging, configuration management, and incident response protocols, all tailored to protect CUI from unauthorized access or disclosure. In addition to technical safeguards, the contract mandates adherence to DFARS cyber incident reporting requirements, obligating timely notification and documentation of any cybersecurity incidents affecting CUI. The subcontractor is responsible for demonstrating full compliance through documented policies, continuous monitoring, and potential assessments or audits by the Defense Logistics Agency. Performance is tied to the NAICS code 541512, indicating the work involves computer systems design services, and the agreement is structured as a subcontract under the broader Defense Department procurement framework. All activities must be conducted in support of Defense Logistics Agency missions, regardless of specific location, with an emphasis on systemic compliance rather than isolated technical fixes.
Defense Logistics Agency

POSTED

about 7 hours ago

DEADLINE

N/A
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance and CMMC Assessment SupportThis contract solicits support services to enable defense contractors to achieve CMMC Level 2 compliance by implementing the controls outlined in NIST SP 800-171, conducting comprehensive system assessments, and preparing accurate SPRS reports for Controlled Unclassified Information environments. The work is targeted at small businesses, as the procurement is set aside entirely for small business participation under SBA guidelines, and is classified under NAICS code 541512 for computer systems design services. The services must be delivered to ensure full alignment with Department of Defense cybersecurity requirements for handling sensitive government data, with an emphasis on documentation, validation, and continuous compliance readiness. The contract is issued under the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV and is structured as a subcontract, indicating it supports a larger prime contracting effort. Interested parties must submit responses by September 3, 2026, and all activities will be performed in support of government contracts handling Controlled Unclassified Information. The solicitation is publicly accessible via the DIBBS portal, and while the place of performance and point of contact are not specified, the nature of the work requires close coordination with federal defense contractors across multiple locations to facilitate assessment, implementation, and reporting activities on-site or remotely as needed.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

in 30 days
View Details
NAICS: 541512
New
SLED
Azure Consulting IDIQThe Port of Seattle is preparing to engage a qualified cloud services partner through an Indefinite Delivery/Indefinite Quantity (IDIQ) contract to support the adoption, modernization, and optimization of Microsoft Azure cloud and hybrid environments. The primary focus will be on evaluating and strengthening the existing Azure architecture, guiding the implementation of new services, and ensuring all deployments align with organizational standards, operational requirements, and long-term scalability goals. Key objectives include enhancing security posture, improving system resiliency, and optimizing cloud performance to meet evolving business needs. The partner will be expected to provide expert consultation throughout the lifecycle of Azure initiatives, from design and deployment to ongoing refinement and compliance validation. This engagement is managed by the Port of Seattle’s ICT Enterprise Infrastructure Services division, with primary point of contact Carol Hassard and Project Manager Jim Dawson overseeing the process. The solicitation is posted under NAICS code 541512 for computer systems design services, with all work expected to be performed in alignment with the Port’s internal frameworks and security protocols. The anticipated timeline for this initiative begins with a forecast posting in July 2026, signaling the upcoming availability of formal solicitation documents for qualified vendors.
ICT Enterprise Infrastructure Services

POSTED

about 8 hours ago

DEADLINE

N/A
View Details
NAICS: 541512
New
SLED
FIDS Software ReplacementThe Port of Seattle through its ICT Enterprise Infrastructure Services is preparing to replace its existing Flight Information Display System software with a new solution to enhance airport operations and passenger information capabilities. This initiative is classified under NAICS code 541512 for Custom Computer Programming Services and is currently in the forecasting stage with a posted date of July 31, 2026. The project involves developing and deploying modern software tailored to display real-time flight data across multiple terminals, ensuring accuracy, reliability, and seamless integration with existing airport systems. The primary point of contact is Farlis Lewis, reachable via email and phone, with Krista Sadler serving as the project manager for technical coordination and oversight. The software replacement aims to improve system performance, user interface clarity, and system scalability to meet future growth demands at the airport. While the specific technical requirements and procurement timeline have not yet been released, interested vendors should prepare to demonstrate expertise in aviation information systems, real-time data integration, and customer-facing display technologies. The place of performance is likely centered at Seattle-Tacoma International Airport, and there is no indication of a set-aside for small businesses or other socioeconomic categories at this stage. All inquiries and future solicitations will be coordinated through the provided contact information and the official solicitation portal linked in the data.
ICT Enterprise Infrastructure Services

POSTED

about 8 hours ago

DEADLINE

N/A
View Details
NAICS: 541512
New
International
Oracle Enterprise Resource Planning (ERP) Functional Analyst
Solicitation # 21120-27-5451590
The Correctional Service of Canada is seeking a Level 3 Oracle Enterprise Resource Planning Functional Analyst to provide expert functional support for Oracle Financials R12 modules, ensuring seamless operations and alignment with organizational financial systems. The selected resource will also deliver Project Management support for various Financial Policies, Practices and Systems (FPPS) initiatives including the SMS upgrade, Resource Allocation Tool and Resource Management Tool projects, as well as the implementation of the Oracle Warehouse Management System module and other related efforts that may arise during the contract term. This role demands deep technical knowledge of Oracle ERP functionalities and the ability to coordinate across teams to deliver complex system enhancements on time and within scope. The solicitation, numbered 21120-27-5451590, was posted on August 4, 2026, with a response deadline of August 20, 2026, and is open to qualified suppliers under the Federal government procurement framework. Performance of the work is expected to take place in the National Capital Region, with no applicable set aside designation. Martin Verrier, the Contracting Authority, serves as the official point of contact, reachable via email at martin.verrier@csc-scc.gc.ca or by phone at 367-321-4378. All proposals must be submitted through the CanadaBuys platform prior to the stated deadline to be considered.
Correctional Service of Canada

POSTED

about 19 hours ago

DEADLINE

in 16 days
View Details

More opportunities from Department Of Defense → Naval Special Warfare Command

Same awarding agency

NAICS: 314999
New
Federal
Canopy Relative Work (CRW) Parachute Canopies
Solicitation # H9224026QE064
The Naval Special Warfare Command is soliciting proposals for Canopy Relative Work (CRW) Parachute Canopies under a Small Business Set-Aside contract with NAICS code 314999, exclusively reserved for small businesses. To qualify as an offeror, entities must maintain an active registration on SAM.gov, be certified as small under the specified NAICS code, and submit a formal letter of intent via email to USSOCOMNSW01.06@socom.mil, including their company name and Unique Entity ID. The solicitation number is H9224026QE064, with a response deadline of August 5, 2026, and performance will be based in San Diego, California. Access to critical attachments—the Product Description, ELIN Price Worksheet, and Brand Name Justification—is restricted and granted only to eligible respondents who meet the pre-qualification criteria. The product specification includes a chargeable nose reinforcement option that must be priced separately, indicating a need for detailed technical and cost proposals. The evaluation factors, award basis, and detailed technical requirements are contained within these unaccessible attachments, suggesting a potential trade-off evaluation approach rather than a Lowest Price Technically Acceptable model, though this is not confirmed. The government expects compliance with Department of Defense standards, with MIL-STD-129 strongly implied for labeling and bar-coding, though specifics are not stated. No contract value, delivery schedule, payment details, or contracting officer information is provided in the open materials, and no formal FAR clauses or clause alternates are explicitly listed. All submissions must be sent via email to the designated point of contact, and no other submission formats are referenced.
All Other Miscellaneous Textile Product Mills

POSTED

6 days ago

DEADLINE

in about 16 hours
View Details
NAICS: 811310
Federal
Climbing Rock Wall Inspection Maintenance and Repair Services
Solicitation # H9224026QE062
The Naval Special Warfare Command is seeking qualified small businesses to provide Climbing Rock Wall Inspection, Maintenance, and Repair Services under a five-year Indefinite Delivery Indefinite Quantity contract with a maximum value of $150,000. This acquisition is conducted under FAR Part 12 as a commercial item procurement and is exclusively set aside for small businesses, with no competition open to large firms. All task orders will be awarded on a Firm Fixed Price basis, and the place of performance is identified as San Diego, California, 92155. Interested parties must access the full solicitation and any subsequent amendments solely through SAM.gov, where all official updates, including revised deadlines and Q&A documents, will be posted. Amendment 3 includes all previously submitted questions and answers. The solicitation window closed on August 5, 2026, with questions required to be submitted in writing to the designated point of contact, USSOCOMNSW01.11@socom.mil. Supporting documents include a Performance Work Statement, a Pricing Spreadsheet, and a Department of Labor wage determination. While specific evaluation criteria, contract clauses, inspection standards, and special requirements could not be retrieved due to access limitations, offerors were expected to review all available solicitation materials thoroughly, as failure to do so may impact responsiveness. The NAICS code 811310 applies, and all participation is contingent upon compliance with small business certification and submission requirements as outlined in the solicitation documents on SAM.gov.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

8 days ago

DEADLINE

in about 16 hours
View Details
NAICS: 238220
Federal
Mechanical and Pipefitting MaintenanceThis contract entails the installation, repair, and ongoing maintenance of piping systems, hydraulic components, and mechanical subsystems within specialized military equipment operated by the Naval Special Warfare Command under the Department of Defense. The work is classified as a subcontract with a total small business set-aside designation, meaning only small businesses certified under the Small Business Administration’s programs are eligible to bid, ensuring opportunities for qualified small firms to participate in critical defense logistics. The North American Industry Classification System code 238220 directly aligns the scope with specialized plumbing, pipefitting, and mechanical services required for high-performance military hardware. All performance must be carried out in support of naval special operations assets, with the requirement to maintain the highest standards of reliability and readiness under demanding operational conditions. The solicitation was posted on July 21, 2026, and responses must be submitted no later than August 21, 2026, at 4:00 PM Eastern Time, leaving a six-week window for qualified small businesses to prepare and submit proposals. While specific locations for performance are not detailed, the work is inherently tied to the operational needs of Naval Special Warfare units, implying potential deployment to field locations, secure facilities, or forward-operating bases. The procurement operates under strict federal contracting guidelines to ensure compliance with defense quality and security protocols. Bidders must demonstrate proven experience in maintaining complex mechanical and hydraulic systems under military specifications, along with the capacity to respond rapidly to mission-critical repairs.
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

14 days ago

DEADLINE

in 17 days
View Details
NAICS: 811310
Federal
Bullet Trap Integrity Inspection and RepairThe contract titled Bullet Trap Integrity Inspection and Repair is a subcontract issued by the Naval Special Warfare Command under the Department of Defense, designated with NAICS code 811310 for mechanical repair and maintenance services. It requires comprehensive structural and functional inspections of bullet traps to assess their integrity, with the goal of identifying damage caused by repeated firearm impacts and ensuring continued operational safety and performance. Contractors must be prepared to repair or replace compromised components, such as backstop panels, baffles, and support structures, using approved materials and methods that meet military standards for durability and ballistic containment. The solicitation was posted on July 20, 2026, with a firm response deadline of August 19, 2026, at 2:00 PM. The work is to be performed at locations determined by the Naval Special Warfare Command, though specific geographic details are not provided. The contract emphasizes technical expertise in ballistic equipment maintenance, requiring qualified personnel with experience in military-grade range infrastructure and safety protocols. Participation is open to subcontractors who can demonstrate capacity to deliver timely, high-quality inspections and repairs without disrupting active training operations, and all work must comply with Department of Defense safety and regulatory requirements.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

15 days ago

DEADLINE

in 15 days
View Details
NAICS: 811310
Federal
Range Trap Maintenance & Repair Services
Solicitation # H9224026Q1011
The Naval Special Warfare Command is procuring routine inspection, maintenance, and repair services for its Indoor Dynamic Shooting Range at Imperial Beach, California, under a five-year Indefinite Delivery/Indefinite Quantity contract with a maximum value of $249,000. The scope of work focuses exclusively on the Air Barrier System and Dust Collection Unit, including verification of damper positions, air velocities and volumes, filter conditions, and bullet trap integrity. The acquisition is being conducted as a sole source award to Savage Range Systems, Inc. under FAR 12.201-1, as the company is the sole designer, builder, and installer of the proprietary system with patented components that only its personnel can service or replace. No competitive solicitation is required due to the technical exclusivity of the equipment, and the contract will be fulfilled through Firm Fixed Price task orders issued over the five-year period. The place of performance is solely at the Imperial Beach facility, with no physical deliveries or FOB terms applicable. The NAICS code is 811310 with a size standard of $12.5 million, and while the contract does not specify evaluation factors, payment details, invoicing systems, or formal inspection standards, all work must conform to the manufacturer’s proprietary specifications. The contracting office is located in San Diego, California, and the solicitation number is H9224026Q1011, with proposals due by August 19, 2026, and no set-aside or socioeconomic preferences applied.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

15 days ago

DEADLINE

in 15 days
View Details