Top

Bullet Trap Integrity Inspection and Repair

Active

Federal

Response Deadline08/19/2026, 02:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → Naval Special Warfare CommandView Agency

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and MaintenanceView NAICS

Place of Performance

CA, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 20

subcontract

Response DeadlineAug 19

Submission deadline

Response Deadline

08/19/2026, 02:00:00 PM UTCin 24 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

AgencyDepartment Of Defense → Naval Special Warfare Command

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Naval Special Warfare Command

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Structural and functional inspection of bullet traps, including repair or replacement of impacted components to maintain safety and performance.

Similar Contracts

Same NAICS industry code

NAICS: 811310

New

SLED

Lufkin Generator ServicesThe Texas Department of Public Safety is soliciting bids for generator services at 2809 S. John Reddit Dr. in Lufkin, Texas, under solicitation number 26R0024565. This opportunity is open to qualified vendors capable of providing comprehensive generator maintenance, repair, and related services at the specified location. The solicitation was posted on July 25, 2026, and responses are due by 11:00 p.m. CT on August 14, 2026. There is no specific set-aside classification indicated, and the NAICS code has not been provided. The contract falls under the state, local, and education (SLED) category, managed by the Texas DPS office. Ruben Reyes is the primary point of contact for inquiries, reachable at 512-424-5137 or ruben.reyes@dps.texas.gov. All necessary details and submission guidelines can be accessed through the official Texas SmartBuy portal link provided.

Department of Public Safety

POSTED

DEADLINE

Mechanical Pump Repair and Overhaul ServicesPetrojam Limited, acting under the Government of Jamaica, is seeking qualified contractors to perform comprehensive repair, maintenance, and overhaul services for industrial P-11 pump systems. The scope of work includes complete disassembly of the pumps, detailed inspection of all components, replacement of worn or damaged parts, precise reassembly, alignment to manufacturer specifications, and rigorous performance testing to ensure operational integrity. The contract is classified under NAICS code 811310, indicating it is a mechanical repair and maintenance service, and is structured as a subcontract. All work must be conducted to meet stringent industrial standards, ensuring reliability and longevity of the pump systems. The solicitation was posted on July 25, 2026, and the place of performance is not specified beyond the jurisdiction of Jamaica, with all technical execution expected to meet the operational demands of Petrojam’s industrial infrastructure.

POSTED

DEADLINE

P-11 Pump Repairs 2026

POSTED

DEADLINE

Emergency Repair and On-Demand Servicing for Industrial Laundry SystemsThe contract titled Emergency Repair and On-Demand Servicing for Industrial Laundry Systems establishes a requirement for 24/7 emergency response services to address urgent breakdowns or malfunctions in commercial laundry equipment, ensuring immediate repairs to restore critical operations. Services must be available around the clock to support facilities with time-sensitive laundry needs, particularly in healthcare and institutional settings where downtime can disrupt essential services. The work is classified under NAICS code 811310, which encompasses industrial laundry and cleaning services, and is structured as a subcontract opportunity with no set-aside designation. The solicitation was posted on July 24, 2026, with a response deadline of August 14, 2026, at 4:30 PM. The contracting agency is the Health and Human Services Commission of Texas, indicating the services are intended to support state-operated or funded facilities under its purview. While specific location details for performance are not provided, the scope implies service coverage across Texas facilities under the agency’s jurisdiction. Interested parties must submit proposals through the Texas SmartBuy portal prior to the stated deadline to be considered for award.

Health and Human Services Commission

POSTED

DEADLINE

Commercial Laundry Equipment Preventive MaintenanceThe contract pertains to preventive maintenance services for commercial laundry equipment, including industrial washers, dryers, and associated systems, with the goal of preventing unexpected failures and maintaining adherence to health and hygiene standards. Services encompass routine cleaning, lubrication, calibration, and performance testing to ensure consistent operational efficiency and regulatory compliance. The work is classified under NAICS code 811310 and is structured as a subcontract opportunity, issued by the Texas Health and Human Services Commission. All maintenance activities must be performed in alignment with industry best practices to uphold facility sanitation requirements and equipment longevity. The solicitation was posted on July 24, 2026, with responses due by August 14, 2026, at 4:30 PM. The contract remains open to qualified vendors with no specified set-aside status, and performance is expected to occur across locations under the jurisdiction of the Texas agency. While specific geographic details and point of contact information are omitted, interested parties can access further details through the provided Texas SmartBuy portal link. Bidders must be prepared to demonstrate capability in servicing commercial laundry systems and ensuring uninterrupted operation in healthcare or institutional environments where hygiene is critical.

Health and Human Services Commission

POSTED

DEADLINE

Maintenance and Repairs for Commercial Laundry Equipment at the Mexia State Supported Living Center.The Texas Health and Human Services Commission is soliciting competitive bids to secure services for the maintenance and repair of commercial laundry equipment at the Mexia State Supported Living Center located at 540 Chapel Drive in Mexia, Texas. The solicitation, numbered HHS0017693, was posted on July 24, 2026, with a response deadline of August 14, 2026, at 4:30 PM Central Time. This procurement is managed by the Procurement and Contracting Services division of the agency and is intended to establish one or more contracts to ensure the ongoing operational reliability of laundry systems critical to the center’s daily functions. The work involves comprehensive servicing, troubleshooting, and repair of industrial-grade laundry machines and related infrastructure to maintain health, hygiene, and compliance standards within the facility. The contract will be awarded to qualified vendors able to demonstrate experience in commercial laundry equipment maintenance, response capabilities, and adherence to state facility requirements. Proposals must be submitted through the Texas SmartBuy portal, and all inquiries should be directed to David Martinez, the primary point of contact, via email at david.martinez01@hhs.texas.gov or phone at 512-406-2597. The opportunity is open to eligible businesses under the state and local government (SLED) category, with no set-aside designation specified, and the place of performance is exclusively located in Mexia, Texas. Bidders are expected to provide detailed service plans, pricing structures, and proof of technical competency to meet the operational demands of a state-supported living center.

Health and Human Services Commission

POSTED

DEADLINE

Maintenance and Support Plan for Printing EquipmentThis contract outlines a comprehensive maintenance and support plan for a UV-LED sign printer, covering preventive maintenance, timely repairs, replacement of worn or faulty parts, and ongoing technical support to ensure uninterrupted operation. The services are designed to maintain the printer’s performance, extend its operational life, and minimize downtime through proactive servicing and expert assistance. The agreement is structured as a subcontract under the Texas Department of Transportation, with the North American Industry Classification System code 811310 indicating it falls under repair and maintenance services for commercial and industrial machinery. The solicitation was posted on July 24, 2026, and responses are due by August 14, 2026, with the place of performance and organizational specifics not provided beyond the agency affiliation.

Texas Department Of Transportation

POSTED

DEADLINE

Small, Local, and DBE/MBE/WBE Supplier ParticipationHenry County Board of Commissioners is inviting certified small, disadvantaged, minority-, women-, and veteran-owned businesses to serve as subcontractors or suppliers in support of generator maintenance services under a subcontract opportunity. The solicitation is open to businesses certified under relevant disadvantaged business enterprise programs and aims to foster local economic participation through targeted subcontracting roles. The NAICS code 811310 specifies the scope of work centered on industrial and commercial equipment repair and maintenance, with performance expected to occur within Georgia. The posting date is July 24, 2026, and responses must be submitted by August 25, 2026, at 8:00 PM Eastern Time. While no specific set-aside designation is listed, the opportunity explicitly encourages participation from underrepresented business owners. Interested parties should access the full solicitation details via the provided state portal link before the deadline.

Henry County Board of Commissioners

POSTED

DEADLINE

Generator Inspection and Maintenance ServicesHenry County Board of Commissioners is seeking a subcontractor to conduct biannual inspections and preventive maintenance on 31 generator units located across various county facilities. The generators include both diesel and natural gas-powered models, each with specific technical ratings that must be adhered to during servicing. The work requires qualified personnel capable of performing comprehensive maintenance procedures to ensure operational reliability and safety standards are consistently met. All tasks must be completed on a scheduled biannual basis across all designated sites. This procurement is classified under NAICS code 811310 for Miscellaneous Repair and Maintenance. The solicitation was posted on July 24, 2026, and responses are due by August 25, 2026, at 8:00 PM. The contract is structured as a subcontract and no set-asides have been designated. Performance of the services will occur at facilities within Henry County, Georgia, though exact locations are not specified. The full solicitation can be accessed via the provided state procurement portal link.

Henry County Board of Commissioners

POSTED

DEADLINE

RFP #27-03, Generator Services and Maintenance - Annual ContractHenry County is seeking qualified vendors to provide annual generator services and maintenance for generators located across various county buildings under a renewable one-year contract. The selected contractor must supply all necessary labor, materials, equipment, and services to ensure proper operation, scheduled maintenance, and timely repairs of the generators. Proposals must be submitted by 3:00 PM local time on August 25, 2026, and can be delivered in person, via mail or common carrier to the Purchasing Department at 140 Henry Parkway, McDonough, GA 30253, or electronically through the County’s eProcurement Portal. Emailed or faxed submissions will not be accepted. Once submitted, proposals cannot be withdrawn for sixty days except as permitted by law, and the County retains the right to reject any or all proposals without explanation or to waive minor technical discrepancies. The solicitation is managed by the Henry County Board of Commissioners, with primary contact information provided through Christina Dismuke at purchasing@henrycountyga.gov or 770-288-6027.

Henry County Board of Commissioners

POSTED

DEADLINE

Repair & Parts for sheet ironer at Richmond SSLCThe contract solicitation titled Repair & Parts for sheet ironer at Richmond SSLC is issued by the Texas Health and Human Services Commission under solicitation number HHS0017554v3, posted on July 24, 2026, with a response deadline of August 7, 2026, at 4:30 PM CT. This solicitation is categorized as a SLED procurement, indicating it is directed toward state, local, or educational entities, and the work is to be performed in Texas, specifically at the Richmond SSLC facility. The scope involves the repair and provision of necessary parts for a sheet ironer, though specific technical requirements or part specifications are not detailed in the provided metadata. The primary point of contact for inquiries is Kimberly Andrews, reachable at 972-337-6254 or Kimberley.Andrews@hhs.texas.gov, and all submissions must be made through the Texas SmartBuy portal via the provided UI link. No set-aside status or NAICS code is listed, suggesting the opportunity is open to all qualified offerors without specific small business or socioeconomic preferences. Bidders are expected to respond by the stated deadline with proposals addressing the repair needs, parts supply, and associated service terms for the equipment at the designated location.

Health and Human Services Commission

POSTED

DEADLINE

Preventive Maintenance and Field RepairsThe contract mandates the performance of scheduled and unscheduled maintenance and repair services on forklifts during a 10-week deployment to maintain full operational readiness. All work must be completed in San Diego, with the scope focused exclusively on ensuring forklift functionality through timely preventive measures and emergency repairs. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to respond, and the North American Industry Classification System code 811310 identifies the work as machinery and equipment repair and maintenance. The opportunity was posted on July 24, 2026, with responses due by 4:00 PM on July 28, 2026, and is managed by the Portsmouth Naval Shipyard under the Department of Defense.

Portsmouth Naval Shipyard Gf

POSTED

2 days ago

DEADLINE

in 1 day

View Details

More opportunities from Department Of Defense → Naval Special Warfare Command

Same awarding agency

NAICS: 811310

New

Federal

Climbing Rock Wall Inspection Maintenance and Repair ServicesNaval Special Warfare Command is seeking qualified small businesses to provide Inspection, Maintenance, and Repair Services for climbing rock walls under a five-year Indefinite Delivery Indefinite Quantity contract with a maximum value of $150,000. This acquisition is conducted as a 100% small business set-aside under FAR Part 12, adhering to commercial item acquisition procedures. All proposals must be submitted via SAM.gov, where the full solicitation, amendments, and supporting documents including the Performance Work Statement, Pricing Spreadsheet, and DoL WD 2015-5635 are posted. Responses are due by August 5, 2026, and all inquiries must be submitted in writing to the designated point of contact. The work will be performed in San Diego, California, and task orders will be issued at firm fixed prices. Offerors are responsible for regularly monitoring SAM.gov for any modifications to deadlines or requirements, and no other source will provide official solicitation materials. While specific evaluation factors, contract administration data, inspection criteria, and detailed performance specifications are not accessible due to system retrieval restrictions, the requirement emphasizes compliance with commercial item standards and small business participation.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

CYPRES-2The Naval Special Warfare Command plans to award a five-year Firm Fixed Price Blanket Purchase Agreement solely to SSK Military Industries, Inc. for the procurement of AirTec GmbH & Co. KG’s CYPRES-2 Automatic Activation Devices, which are critical safety systems already integrated into existing military equipment. SSK Military Industries is recognized as the exclusive U.S. authorized distributor for the military-grade CYPRES-2, making it the only known source capable of fulfilling this requirement. The acquisition is being conducted under simplified acquisition procedures for commercial items, authorized by 41 U.S.C. 1901 and implemented through FAR 12.201-1, allowing for a sole source award without formal competition. The contract falls under NAICS code 334511 with a size standard of 1,350 employees, and includes annual performance reviews to ensure continued compliance with operational and quality standards. This notice serves as a public announcement to identify potential alternate sources, but responses must be submitted in writing by 10:00 AM EST on August 3, 2026, and must include detailed technical capability documentation demonstrating the ability to meet delivery timelines. Submissions will not be compensated, and the government retains full discretion to determine whether competition exists. If no viable alternative responses are received, the award will proceed directly to SSK Military Industries, Inc. The point of contact for inquiries is Emily Lonigro, and performance will be centered in Coronado, California, under the oversight of the Department of Defense.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

General Maintenance and Helper Labor

All Other Specialty Trade Contractors

POSTED

DEADLINE

Engineering and Technical Support Services

POSTED

DEADLINE

Supply Chain and Inventory Management Support

General Warehousing and Storage

POSTED

DEADLINE

Mechanical and Pipefitting Maintenance

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Electronics Repair and Maintenance Services

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

Target Repair, Refurbishment and Upgrade ServicesThe Target Repair, Refurbishment and Upgrade Services IDIQ solicitation, identified by H9224026QE065, is a full small business set-aside opportunity issued by the Naval Special Warfare Command under the Department of Defense. The solicitation, posted on July 21, 2026, with a response deadline of August 21, 2026, is classified under NAICS code 339920, which pertains to other miscellaneous manufacturing. This contract is designed to support repair, refurbishment, and upgrade services essential to maintaining and enhancing the operational readiness of specialized equipment used by Naval Special Warfare units. The prime point of contact is KO 1 at USSOCOMNSW01.07@socom.mil, with KO 2 as the secondary contact at USSOCOMNSW01.05@socom.mil. The office managing the solicitation is located in San Diego, California, with performance expected to be distributed across multiple locations as needed to satisfy mission requirements, although specific places of performance are not yet defined. All offers must be submitted by the stated deadline and are open exclusively to certified small business concerns as defined by the Small Business Administration.

Sporting and Athletic Goods Manufacturing

POSTED

DEADLINE

Dust Collection Unit (DCU) Maintenance and Filter Replacement

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Air Barrier System (ABS) Inspection and Maintenance

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Range Trap Maintenance & Repair ServicesThe Naval Special Warfare Command is seeking routine inspection, maintenance, and repair services for its Indoor Dynamic Shooting Range at Imperial Beach, California, focusing on the Air Barrier System and Dust Collection Unit. This includes verifying damper positions, air velocities and volumes, filter conditions, and bullet trap functionality across all ranges. The work will be performed under a five-year Indefinite Delivery Indefinite Quantity contract with Firm Fixed Price task orders, with a total maximum value of $249,000. The acquisition is being conducted as a sole source award under 41 U.S.C. 1901 and FAR 12.201-1, with Savage Range Systems, Inc. identified as the sole eligible contractor based on its specialized expertise and CAGE code 1T8M8. The North American Industry Classification System code is 811310, and the small business size standard is $12.5 million, though no set aside is being used for this procurement. The solicitation number is H9224026Q1011, posted on July 20, 2026, with responses due by August 19, 2026, and the point of contact is N01C1-04 at USSOCOMNSW01.04@socom.mil. This notice does not constitute a request for proposal or a binding obligation from the government.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Canopy Relative Work (CRW) Parachute CanopiesThe U.S. Naval Special Warfare Command is soliciting bids for Canopy Relative Work (CRW) Parachute Canopies under solicitation number H9224026QE064, with a response deadline of July 31, 2026. This is a total small business set-aside under NAICS code 314999, meaning only small businesses registered in SAM.gov may respond, and all interested parties must submit a letter of intent to quote as the prime contractor via email to USSOCOMNSW01.06@socom.mil, including their company name and UEI. The contract will be awarded to a single vendor, and eligibility requires active SAM.gov registration along with classification as a small business under the specified NAICS code. The work is performance-based with the place of performance in San Diego, California, and all relevant product specifications, pricing details, and brand justification are provided in attached documents accessible only to qualified bidders. Primary point of contact for inquiries is NSW Div 1, located at the agency’s office in San Diego.

All Other Miscellaneous Textile Product Mills

POSTED

11 days ago

DEADLINE

in 5 days

View Details