This Solicitation opportunity from Government of Canada was posted on May 28, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Aviation Replacement Parts for the CC-138 Twin Otter

Closed

W8485-279438/AInternational

Submission Closed05/28/2026, 02:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336413

New

DIBBS

PLATE, STRUCTURAL, AI

Solicitation # SPE4A6-26-T-16SB

This solicitation from the Department of Defense ASC Commodities Division is for the procurement of three structural aluminum plates under NSN 1560-01-723-7586. The contract requires delivery within 198 days after receipt of order and is categorized under NAICS code 336413. Performance is to take place in New Cumberland, Pennsylvania. The agreement is subject to strict technical and quality requirements as defined by the DLA Master List, including specific packaging standards. Notably, the item contains technical data subject to ITAR and EAR export controls, meaning access is limited to contractors with approved US/Canada Joint Certification Program certification and completed DOD export-control training.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE4A7-26-T-651M

This contract is for the procurement of 180 units of structural support components for aircraft, identified by NSN 1560-01-589-6096 and part number UH1-2000-4 from Paravion Technology Inc. The agreement specifies a delivery timeframe of 174 days after order, with a required delivery date of November 12, 2026, and a need ship date of February 12, 2027. Shipping is FOB Origin, with the final destination being the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including CMMC Level 2 self-assessment for cybersecurity and specific documentation for source approval. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, emphasizing zero non-conformances for acceptance. Packaging must comply with MIL-STD-129 and RP001, with specific requirements for hazardous materials under FED-STD-313 or commercial packaging via ASTM D3951.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

DOOR, ACCESS, AIRCRAF

Solicitation # SPE4A5-26-T-353D

This contract is for the procurement of two aircraft access doors, identified by NSN 1560-01-652-9408 and Boeing part numbers 114T2401-1 and 114T2401-4. These are classified as critical application items requiring FAA airworthiness approval and a Certificate of Airworthiness and Conformance. The procurement is managed by the Department of Defense ASC Supplier Oper OEM Division, with delivery scheduled for February 14, 2029, to the DLA Distribution Depot at Tinker AFB, Oklahoma. The agreement mandates strict adherence to technical and quality requirements, including supply chain traceability documentation and specific FAA bare item marking. Packaging and palletization must comply with MIL-STD-129 and DLA procurement standards. Quality assurance will be conducted via a zero-based sampling plan according to MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. Item Unique Identification is not required for this specific order.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

CAP, FILLER, PUMP HOU

Solicitation # SPE4A5-26-T-353R

This contract is for the procurement of one pump housing filler cap, identified by NSN 1610006287747 and Hamilton Sundstrand part number 513676. The item is designated as a critical application item and must be delivered FOB Origin to the specified location in East Granby, Connecticut, within 20 days. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific standards for sampling, measuring and test equipment, and cybersecurity maturity model certification level 2 self-assessment. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA procurement requirements. Item Unique Identification is not required for this order.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Solicitation # SPE4A7-26-T-652A

This contract is a solicitation for the procurement of 33 units of a Retainer Assembly, identified by NSN 1680-01-568-7312. The requirement specifies parts from Hydraulics International, Inc. (P/N 8WA1808) or Siemens Industrial Automation Inc (P/N SWA1808). The delivery is required within 96 days, with a final need date of November 26, 2026, shipping FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 and MIL-STD-2073-1E. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-nonconformance acceptance policy for sample lots. Inspection and acceptance will occur at the destination, and the contract allows for no quantity variance.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

PRODUCTION LOT TESTING

Solicitation # SPE4A7-26-T-652J

This solicitation, identified as SPE4A7-26-T-652J, is for the procurement of 44 units of part number 0001S00000061 with a delivery timeline of 433 days after order. The contract requires the contractor to provide current dealer or distributor certification and specifies that Fast Pay is not applicable. A critical requirement of this agreement is the First Article Approval process, which mandates the delivery of two units to the Fleet Readiness Center East in Cherry Point, North Carolina, within 90 calendar days of the contract date. The government will notify the contractor of approval or disapproval within 195 days of receipt. Following First Article approval, the contractor must undergo Production Lot Testing, which involves the random selection of two samples by the Quality Assurance Representative to validate quality conformance. These samples must be shipped to the same North Carolina location with comprehensive documentation, including test reports and material certifications.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Solicitation # SPE4A7-26-T-651Y

This solicitation, numbered SPE4A7-26-T-651Y, is issued by the Department of Defense for the procurement of one Longeron, identified by NSN 1560-01-422-4167. The contract requires delivery within 85 days after receipt of order and is managed by the ASC Supplier Oper AE and AF Div. Performance is designated for Tinker AFB. The agreement is subject to strict technical and quality requirements as outlined in the DLA Master List. Key compliance mandates include CMMC Level 2 certification, adherence to Covered Defense Information standards, and specific packaging and marking protocols. Furthermore, the item contains technical data subject to ITAR or EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specialized DOD export-control training.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Solicitation # SPE7M3-26-T-8246

This contract is for the procurement of pipe-to-hose elbows made from cadmium-plated copper alloy, featuring a 90-degree flow angle with a 3/8 inch ID hose size and a 1/4 inch nominal pipe size. The items are designated as critical application components and must be produced by an accredited manufacturer listed on the PRI Qualified Manufacturer List or Qualified Products List. The total quantity required is 153 units, split between two delivery locations: 71 units to DLA Distribution Barstow and 82 units to DLA Distribution Albany. The delivery period is set at 161 days after the order, with a required delivery date of May 12, 2027. Compliance with various military standards is mandatory, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Additionally, the contract prohibits the use of Class I ozone-depleting chemicals and requires adherence to DLA packaging requirements. Shipping is FOB Origin, and inspection and acceptance will occur at the destination.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7L4-26-T-6315

Solicitation SPE7L4-26-T-6315 is a federal request for 37 units of seat assembly support, identified by NSN 1680-01-110-1489, with a delivery window of 306 days after order. The procurement is managed by the Department of Defense under the LSO Combat Vehicles and Armament agency, with performance located in Cherry Point. Offerors are encouraged to provide quantity ranges to accommodate potential demand volatility and must disclose any non-domestic materials to comply with the Buy American Act and Berry Amendment restrictions. Key compliance requirements include a representation against providing covered telecommunications equipment and strict adherence to domestic material restrictions. Small business joint ventures must provide specific certifications under FAR 52.212-3 and 52.219-1. Additionally, contractors must prepare for a transition to the Account Management and Provisioning System for VSM access and are prohibited from using additive manufacturing processes unless specifically authorized. Quotes are submitted via DIBBS, and those unable to quote by the deadline are asked to submit a No Bid with an anticipated date to maintain communication with buyers.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

PANEL, STRUCTURAL, AIRCRAFT

Solicitation # SPE4A7-26-R-0721

This solicitation, issued by the Department of Defense ASC Supplier Oper AE and AF Div, is for the procurement of one structural aircraft panel under NSN 1560-01-618-5240. The contract is designated as a total small business set-aside with a delivery requirement of 780 days after order. The solicitation was posted on August 13, 2026, with a response deadline of September 15, 2026. The agreement incorporates several critical technical and quality requirements from the DLA Master List, including specific standards for packaging, source approval documentation, configuration change management, and inspection and acceptance at origin. Notably, the item contains technical data subject to ITAR or EAR export controls, requiring contractors to hold an approved US/Canada Joint Certification Program certification and complete mandatory export-control training. While covered defense information applies, item unique identification is not required for this specific procurement.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Solicitation # SPE4A7-26-T-652K

This contract is for the procurement of two duct valve assemblies, identified as a critical application item with part number 212-060-203-003 from Bell Textron Inc. The order is classified as a commercial item under solicitation SPE4A7-26-T-652K, with a required delivery date of April 20, 2026, and a delivery timeframe of 163 days. Shipping is set as FOB Origin, with the final destination being the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific standards for packaging, marking, and cybersecurity via CMMC Level 2 self-assessment. Quality assurance will be managed through zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. Packaging must comply with MIL-STD-129 and RP001, with specific instructions for hazardous or non-hazardous materials based on FED-STD-313 and ASTM D3951.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Solicitation # SPE4A7-26-R-0706

The contract pertains to a Parts Kit, Wing for the FA-18 aircraft, identified by NSN 1560-016852166 and part number 4154AS0113-1, manufactured in strict accordance with drawing number 30003 4154AS0113, Revision F dated December 16, 2025. This procurement is structured as an Indefinite Quantity Contract with a three-year base period and no options, targeting an estimated annual quantity of 80 units. Delivery of production units must occur within 300 days, with FOB origin terms and inspection and acceptance also conducted at the point of origin. The solicitation is designated as a total small business set-aside, and access to technical data required for manufacturing is restricted to contractors certified under DoD 5220.22M, necessitating submission of DD Form 2345 to the Defense Logistics Information Services. The solicitation, identified as SPE4A726R0706, will be issued on or about August 13, 2026, and is exclusively available through the DLA Internet Bid Board System; no paper copies will be provided. Proposals must be submitted by September 14, 2026, and all communication and documentation must be handled via the online portal. The contracting office is located in Richmond, Virginia, under the Department of Defense, with Ryan Loeffelholz listed as the primary point of contact.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

in about 1 month

AI Contract Overview

The Department of National Defence is seeking aviation replacement parts for the CC-138 Twin Otter through a restricted Request for Proposal under Supply Arrangement W8485-184741 Series, with solicitation number W8485-279438/A. Only qualified holders of this supply arrangement are eligible to respond, and a list of invited suppliers includes major aerospace and defense contractors such as Honeywell Ltd, Rockwell Collins Canada, StandardAero Atlantic Inc, and PAL Aerospace, among others. The procurement is limited to six specific items and is managed by the Directorate of Aerospace Procurement, with all RFP documentation distributed directly by the Contracting Officer via email, bypassing the Government Electronics Tendering System for delivery purposes. Proposals must be submitted by the deadline of May 28, 2026, at 14:00 Eastern Time. All inquiries must be directed to Ivan Khanzadeev of the Aerospace Equipment Program Management unit in Gatineau, Quebec. This procurement opportunity is part of an ongoing framework that allows for annual updates to the qualified supplier pool through a public notice posted on the Government Electronic Tendering Service. Suppliers interested in future qualification for this supply arrangement can submit requests to Megan McCandless of Public Services and Procurement Canada’s Civilian Aircraft Division. The NAICS code 336413 indicates the nature of the procurement relates to aircraft manufacturing and support, aligning with the specific maintenance and sustainment needs of Canada’s CC-138 fleet. The contract mechanism ensures continuity of supply for critical aviation components while maintaining strict vendor pre-qualification to support operational readiness and accountability under federal procurement standards.

General Info

DND seeks proposals for six CC-138 Twin Otter parts; qualified suppliers only; deadline May 28, 2026.

Agency

Government of Canada → Department of National DefenceView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedMay 28

Solicitation

Response DeadlineMay 28

Deadline has passed

Submission Closed

05/28/2026, 02:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Department of National Defence

Contacts1 person available

OfficeN/A

Organization / Agency

Government of Canada → Department of National Defence

View Agency Profile

Office AddressN/A

Contacts

Ivan KhanzadeevPoint of Contact

contact@example.gov

Full Description

Notice of Proposed Procurement (NPP) Department of National Defence Supply Arrangement - W8485-184741 Series - Aviation Replacement Parts Solicitation: W8485-279438/A This requirement is to acquire 6 items for the CC-138 for the Department of National Defence (DND), Directorate of Aerospace Procurement (DAP) 4. This Request for proposal (RFP) is open only to Qualified Supply Arrangement (SA) Holders of Supply Arrangement W8485-184741 series. The following companies have been invited to submit a proposal: Aero Precision Industries LLC B S F (Business Solutions Fasteners) International Inc. JHT Defense Inc. Mills/Sterling Aerospace Inc. Patlon Aircraft & Industries Limited Simex Defence Inc. Tower Aerospace Inc. Genaire Limited Unisource Technology Inc. StandardAero Atlantic Inc. L3 Technologies MAS Inc. Tronosjet Maintenance Inc. Tulmar Safety Canada West Avionics Honeywell Ltd M1 Composites Technology Rockwell Collins Canada TSL Aerospace Technologies PAL Aerospace Kenn Borek Air AllClear Aerospace and Defence Inc. CASP Bristow Avmax Aviation Services Inc. CanaG and Z The RFP documents will be e-mailed directly by the Contracting officer to the Qualified SA Holders who are being invited to bid on this requirement. Bidders are advised that Government Electronics Tendering System (GETS) is not responsible for the distribution of the RFP documents. Inquiries regarding this RFP requirement are to be submitted to the Contracting Authority listed below: Aerospace Equipment Program Management (DGAEPM) Department of National Defence (DND) / Government of Canada 455, Boulvard de la carrière, Gatineau (QC) J8Y 6V7 Tel: N/A Ivan.Khanzadeev@forces.gc.ca NOTE: On-going Opportunity for Qualification A Notice will be posted at least once a year on the Government Electronic Tendering Service (GETS) to allow more Suppliers to become qualified for Supply Arrangement W8485-184741 Series. Please submit your request to the Supply Arrangement Authority below: Megan McCandless, Supply Team Leader Government of Canada | Public Services and Procurement Canada Land and Aerospace Equipment Procurement and Support Sector Civilian Aircraft Division - CAG Email: megan.mccandless@tpsgc-pwgsc.gc.ca