This Government Contract opportunity from Department Of Defense was posted on July 17, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Axial Fan Impeller Manufacturing

Closed

Federal

Submission Closed07/22/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333618

New

DIBBS

MANIFOLD, EXHAUSTThe contract pertains to the procurement of an exhaust manifold for Cummins diesel engine model NTC-400, used on M915 through M920 vehicles, identified by NSN 2815-00-920-2073 and part numbers 151478 for Cummins Inc. and MA207 21 147 for AM General LLC. Two units are required to be delivered within 11 days of contract award, with delivery terms FOB origin and no tolerance for quantity variance. Inspection and acceptance occur at the destination. The item is classified as critical, and the use of Class I ozone-depleting chemicals is strictly prohibited, overriding any conflicting specification requirements unless substitutes are pre-approved. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization governed by DLA’s packaging requirements, and all DLA Master List technical and quality requirements take precedence. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, consistent with transportation and shipping instructions referenced in DLAD Proc Notes C19 and C20. The original required delivery date was June 26, 2026, with a needed ship date of August 18, 2026, under solicitation SPE7L5-26-T-4625, with responses due by August 6, 2026. The unit of issue is each, priced at $2.00 per unit, totaling $4.00, and the contract falls under NAICS code 333618 with the Department of Defense as the contracting agency.

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

GOVERNOR, DIESEL ENGINEThe contract specifies the procurement of two diesel engine governors with part number 8448939 and NSN 2910-01-280-9338, supplied by ENGINE SYSTEMS, INC. and PROGRESS RAIL LOCOMOTIVE INC., under solicitation SPE7L4-26-T-5829. Delivery is required within five days of award, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 while adhering strictly to all applicable DLA Master List of Technical and Quality Requirements, including MIL-STD-129 for marking and labeling. Packaging must also meet DLA’s packaging requirements and be palletized according to specified standards. The goods must be shipped via the fastest traceable means, excluding parcel post, to Fort Eustis, Virginia, with delivery coordinated by the designated military logistics code W26RK4. The contract is set aside for Women-Owned Small Businesses and falls under NAICS code 333618, issued by the Department of Defense’s Combat Vehicles and Armament office. The required delivery date is July 23, 2026, with a response deadline of August 6, 2026, and a unit price of $2.00 per unit for a total value of $4.00. The purchasing request number is 7017607541, and all documentation must reference the DLA Master List of Technical and Quality Requirements, which take precedence over any other standards. The point of contact is Anna-Rachelle Betts, with primary inquiries directed to dla.flda1prs@dla.mil. Government use codes and shipping identifiers are specified for internal tracking, and all packaging must include accurate unit of issue and quantity per unit pack data as defined in the purchase order.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

PARTS KIT, RADIATORThe contract is for a Parts Kit, Radiator with NSN 2930-01-731-9795 and part number CTK5029-4 supplied by Baldwin Filters Inc, requiring two units to be delivered within 20 days from the date of order under solicitation SPE7L3-26-T-134M. All supplies must fully comply with the latest revision of MIL-STD-2073-1E Appendix D for kit packaging and MIL-STD-129 for labeling, with no tolerance for quantity variance—exactly two units are required. Packaging must adhere to DLA specifications including preservation methods, container types, and marking requirements, with special codes specified as ZZ-ZZ for unique handling instructions. The delivery is FOB origin and inspection and acceptance occur at the destination, with shipment required via the fastest traceable means, explicitly prohibiting parcel post. The destination for delivery is Marine Aviation Logistics Squadron 26 at MCAS New River, Jacksonville NC, with both a parcel post address and a freight shipping address provided, the latter to be used. The contract references technical and quality requirements from the DLA Master List of Technical and Quality Requirements identified by R or I numbers, and all terms are governed by the version of the master in effect on the solicitation issue date. The required delivery date is July 21, 2026, and the point of contact for inquiries is Lee Miller with the Department of Defense.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

SPEED SENSOR, DIESEL ENThe contract is for the procurement of a speed sensor for diesel engines, identified by NSN 2815-01-533-0634 and part numbers 3000466-002 and MSP 6724, to be supplied by HDT Expeditionary Systems Inc and Governors America Corporation. A total of 17 units are required at a unit price of $17.00, with full payment tied to delivery and acceptance at destination under FOB origin terms. The delivery window is 75 days from contract award, and no quantity variance is permitted. Packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129, including heat-sealed barrier bags for cleanliness, specific preservation methods, and packing codes aligned with DLA requirements. Special marking code 24 indicates the item is open for inspection or use. The contract incorporates technical and quality standards from the DLA Master List, and mercury or mercury-containing compounds are strictly prohibited unless explicitly exempted for functional components like sensors or instruments, which must include a secondary containment per NAVSEA standards. This is a total small business set-aside under NAICS code 333618, issued under solicitation SPE7L1-26-U-0500, with responses due by August 10, 2026, and performance managed by the Department of Defense’s Land Supply Chain.

POSTED

DEADLINE

IDLER, FUEL PUMPThe contract specifies the procurement of an idler gear assembly for a fuel oil pump, designated by NSN 2815-00-103-5340 and part number 9521000, manufactured by Progress Rail Locomotive Inc. for use in GMC 567 series and EMD model 16-645E5LR diesel engines. Nine units are required to be delivered within 11 days FOB origin, with zero variance allowed in quantity, and inspection and acceptance occurring at the destination warehouse in Tracy, California. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including prescribed preservation methods, materials, and unit containment, while prohibiting any mercury or mercury compounds in preservation, packaging, or marking per IP056 and RD004. The item is classified as a critical application item and subject to configuration control under MIL-STD-973, excluding certain subclauses. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with revisions tied to the solicitation or award date depending on acquisition size. Cybersecurity compliance requires a CMMC Level 2 self-assessment, and all marking must conform to MIL-STD-130 section 5.3.1. The delivery address, transportation instructions, and point of contact are fully specified, with the response deadline set for August 6, 2026, and the original required delivery date July 1, 2026.

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

MOTOR, ALTERNATING CThis contract specifies the procurement of one alternating current motor with NSN 6105-01-508-1601 and part number 143005-11, supplied by WARD LEONARD CT LLC under solicitation SPE7M1-26-T-232F. The item is classified as a critical application product and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers. Delivery is required within 20 days to the destination FOB, with no variance allowed in quantity, and inspection and acceptance occur at the delivery point. Packaging must conform to MIL-STD-2073-1E, marking to MIL-STD-129, and palletization to DLA’s RP001 standards, with zero special marking required. The item is destined for USS SAN ANTONIO LPD 17 at FPO AE 09587, with shipment details governed by DLAD PROC NOTES C19 and C20. The contract is a total small business set-aside under NAICS code 333618, with an original required delivery date of July 22, 2026. Technical compliance, government identification removal procedures, and potential handling of covered defense information are applicable, and the contracting officer is Michael Reese at DLA.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

29--GOVERNOR,DIESEL ENGINEThe contract seeks the procurement of two diesel engine governors, identified by NSN 2910012809338, to be delivered to W6YN USALRCTR JB LANGLEY within five days of award. Only approved sources, specifically 39VG9 8448939 and 6Y051 8448939, are eligible to respond. The solicitation is issued as a Request for Quote under number SPE7L426T5829, with a response deadline of August 6, 2026. All submissions must be made electronically through the SAM.gov platform, as hard copies are not available and no specifications, plans, or drawings are provided. The solicitation is set aside exclusively for Women-Owned Small Businesses under NAICS code 333618 and is managed by the DLA Land and Maritime office in Columbus, Ohio. Questions must be directed via email to the designated point of contact, with further details accessible through the provided SAM.gov link.

DLA Land And Maritime

POSTED

DEADLINE

28--SPEED SENSOR,DIESEL ENThe solicitation seeks a single diesel engine speed sensor with NSN 2815015330634, with a quantity of 17 units to be delivered within 75 days of award. This procurement is structured as a potential Automated Indefinite Delivery Contract with a one-year term or until cumulative orders reach $350,000, whichever comes first, with an estimated one order per year and a guaranteed minimum of two units. Deliveries will be made to multiple DLA depots across CONUS and OCONUS regions via consolidated containerized shipping. Only approved sources, identified as 0BXW5 MSP 6724 and 92878 3000466-002, are eligible to respond. The solicitation is issued as a Request for Quotation under a Total Small Business Set-Aside, meaning only small business concerns can qualify. It is managed by the DLA Land and Maritime office in Columbus, Ohio, and requires electronic submission of quotes through the SAM.gov platform; no hard copies are available and no technical specifications, plans, or drawings are provided. Quotes must be submitted before the deadline of August 10, 2026, and all responsible small business sources are encouraged to respond. Point of contact inquiries must be directed via email to the buyer specified in the solicitation document.

DLA Land And Maritime

POSTED

DEADLINE

61--MOTOR,ALTERNATING CThe contract solicitation is for one unit of MOTOR, ALTERNATING C with NSN 6105015081601, with two identical line items each requesting one unit to be delivered to USS SAN ANTONIO LPD 17 within 20 days of award. Only approved sources, identified by manufacturer codes 20019 and 63743, both under part number 143005-11, are eligible to respond. The procurement is issued as a Request for Quote under solicitation number SPE7M126T232F, posted on July 26, 2026, with quotes due by August 6, 2026. It is a Total Small Business Set-Aside under NAICS code 333618, meaning only small business concerns may submit responses. All quotes must be submitted electronically through the SAM.gov portal; hard copies are not accepted, and no specifications, plans, or drawings accompany the solicitation. Questions should be directed via email to the designated point of contact, and the full solicitation document can only be accessed online using the provided link or through DIBBS by entering the solicitation number. The contracting office is located in Columbus, Ohio, under the Department of Defense’s DLA Land and Maritime.

DLA Land And Maritime

POSTED

DEADLINE

Centrifugal Fan SupplyNine centrifugal fans, specified by NSN, are to be supplied to the DDSP NEW CUMBERLAND FACILITY located in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The contract is structured as a subcontract under NAICS code 333618, and no assembly or installation services are required; delivery of the units in their completed form is sufficient. The solicitation was posted on July 24, 2026, and responses must be submitted by July 29, 2026. The contracting organization is part of the Department of Defense, and the place of performance is strictly limited to the specified location in New Cumberland. The contract opportunity is accessible via a public DIBBS portal link, but no point of contact or set-aside details are provided.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

VACUUM BLEED FILTERThe contract is for the procurement of 13 units of a Vacuum Bleed Filter with NSN 2990-01-513-6153 and part number 23055917-28 supplied by Sargent Aerospace & Defense, LLC. The item is classified as a critical application item and must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements. The contract explicitly prohibits the use of Class I ozone-depleting chemicals and any intentional addition of mercury or mercury-containing compounds, except for specific functional exemptions such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and certain chemical reagents specified by NAVSEA; any portable devices containing mercury must be shock-proof and include a secondary containment boundary per NAVSEA 5100-003D. All supplies must be packaged in accordance with MIL-STD-2073-1E and marked per MIL-STD-129 with no special marking required. Delivery is FOB origin, with an 87-day delivery window ending on October 21, 2026, and inspection and acceptance occur at the destination. The quantity variance is strictly zero percent, and packaging must adhere to DLA’s packaging standards including palletization guidelines. The delivery address is the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, and the item must be shipped using the transportation protocols outlined in DLAD Proc Note C19 and C20. The solicitation was issued on July 24, 2026, with a response deadline of July 29, 2026, under contract number SPE7L5-26-T-4457, classified under NAICS code 333618.

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

ROCKER ARM, ENGINE PThis contract specifies the procurement of 13 rocker arms for an engine poppet valve, identified by NSN 2815-01-373-6526 and part number 73304F93, designated as a critical application item for use on the Isotta Fraschini eight-cylinder diesel engine model 2953F01. The item is subject to strict technical and quality standards as defined in the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Mercury or mercury-containing compounds are prohibited from intentional addition or direct contact with the hardware, except in specified cases such as batteries, fluorescent lights, sensors, weapon systems, or chemical reagents approved by NAVSEA; when used, portable devices must include shock-proof construction and a secondary containment boundary per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, using unit container D3, intermediate container DO, and packing code U, with no special marking required. The contract is firm fixed price with zero variance allowed in quantity and requires delivery to the destination with inspection and acceptance occurring upon arrival. The FOB point is origin, and delivery must occur within 134 days after contract award. All shipments must adhere to DLA packaging and transportation guidelines, including the designated parcel post and freight shipping address at the DLA Distribution facility in New Cumberland, Pennsylvania. The contract is part of a federal solicitation issued by the Department of Defense under solicitation number SPE7L5-26-Q-0158, with a response deadline in August 2026 and a material need date of March 13, 2027.

LAND SUPPLIER OPNS ENGINES

POSTED

3 days ago

DEADLINE

in 12 days

AI Contract Overview

The contract requires the manufacture of axial fan impellers to exacting specifications tied to designated part numbers, emphasizing precision machining, dynamic balancing, and full material traceability throughout production. Quality inspections must be conducted in accordance with defined standards to ensure performance reliability and compliance with defense-grade requirements. The work is to be performed at a designated location in San Diego, California, with a strict deadline for proposal submission set for July 22, 2026. This is a subcontract opportunity under the NAICS code 333618, issued by the Department of Defense through the San Diego office, and is not subject to any specific small business set-aside provisions. All submissions must adhere to the technical and procedural guidelines outlined in the solicitation, with the expectation of delivering components that meet rigorous military and aerospace operational standards.