This Solicitation opportunity from Department Of Defense was posted on September 3, 2021. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

B-2 Radar Antenna Repair & End Units

Closed

FA8119-20-R-0010Federal

Submission Closed09/10/2021, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336413

New

DIBBS

Supply of Spacer, Sleeve (NSN 5365-01-034-2519)This subcontract, set aside for total small businesses under NAICS code 336413, involves the manufacture and delivery of 124,000 sleeve spacers, identified as NSN 5365-01-034-2519, for the Defense Logistics Agency Weapons Support ASC. The selected provider will supply these units to DLA Depots, ensuring all items are produced and delivered according to strict military and industry standards. Technical requirements include sampling per MIL-STD-1916 or ASQ H1331, packaging according to ASTM D3951 and RP001, and marking and labeling in compliance with MIL-STD-129. Additionally, the contractor must maintain CMMC Level 1 certification and adhere to all ITAR and EAR export control regulations to ensure the security and legality of the supply chain.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Antenna-430 ADF Repair and Overhaul ServicesThis subcontract involves providing repair and overhaul services for the Antenna-430 ADF, A1, supporting prime contractors on projects for the Department of Defense Navsup Weapon Systems Support. The scope of work includes the complete teardown, evaluation, and modification of units, where defective components are identified and replaced based on approved repair manual limits. All work must be performed using specialized avionics testing equipment and must strictly adhere to IPC/EIAJ-STD-001C soldering standards to ensure units are delivered in Ready for Issue condition. The opportunity is categorized under NAICS code 336413 and was posted on October 20, 2026, with a response deadline of November 19, 2026. This technical engagement focuses on maintaining critical aviation components to meet rigorous military specifications and operational readiness requirements.

Navsup Weapon Systems Support

POSTED

DEADLINE

Aircraft Wheel Component SupplyThis subcontract, titled Aircraft Wheel Component Supply, involves providing replacement components, seals, and hardware to prime contractors supporting NAVSUP Weapon Systems Support aircraft wheel overhaul projects. The scope specifically focuses on delivering certified aircraft-grade replacement parts and aviation-grade alloys that meet approved repair manual specifications for NSN 1630-14-597-7780. Managed under the Department of Defense, the contract requires strict adherence to the Buy American Act and Trade Agreements certifications. Additionally, the supplier is responsible for providing Material Safety Data Sheets for any hazardous materials delivered. The solicitation was posted on October 20, 2026, with a response deadline of November 19, 2026, falling under NAICS code 336413.

Navsup Weapon Systems Support

POSTED

DEADLINE

Aircraft Wheel Half Repair and Overhaul ServicesThis subcontract for Aircraft Wheel Half Repair and Overhaul Services supports NAVSUP Weapon Systems Support projects within the Department of Defense. The scope of work involves the comprehensive teardown, evaluation, repair, and overhaul of aircraft wheel halves under NSN 1630-14-597-7780. The selected provider will be responsible for disassembling units, cleaning and inspecting parts according to approved manuals, replacing defective components, and reassembling the units using specialized fixtures, jigs, and test equipment. All deliverables must be provided in Ready for Issue condition and must strictly comply with MIL-STD-130 and MIL-STD-129 standards. This opportunity falls under NAICS code 336413, with a response deadline set for November 19, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Flight Model Solar Array Wings SupplyThis subcontract involves the supply of flight-ready, qualified solar panel sets for prime contractors working on NASA/NSSC TERP RAPTOR 12U CubeSat projects. The selected provider is responsible for manufacturing solar array wings that adhere to strict space-flight specifications, utilizing space-grade solar cells, flight-qualified substrates, and deployment mechanisms specifically designed for the 12U CubeSat standard. All deliverables must meet the rigorous acceptance and verification standards established by the NASA Goddard Space Flight Center. The final requirement is the delivery of a complete set of flight-ready solar array wings, with performance taking place in Greenbelt, Maryland.

National Aeronautics And Space Administration

POSTED

DEADLINE

Component Evaluation and InspectionThis subcontract, titled Component Evaluation and Inspection, is issued by the Navsup Weapon Systems Support under the Department of Defense. The project involves performing technical evaluations and inspections of spoiler assemblies for prime contractors working on Department of the Navy aerospace projects. The primary objective is to identify structural cracks, corrosion, or fatigue through the application of Non-Destructive Testing methods, specifically X-ray, Ultrasonic, and Dye Penetrant techniques. Qualified providers must hold ASNT or equivalent aerospace inspection certifications to ensure technical compliance. The final deliverable for this engagement is a detailed evaluation report that includes specific recommended repair actions. The solicitation was posted on October 20, 2026, with a response deadline of November 19, 2026, and falls under NAICS code 336413.

Navsup Weapon Systems Support

POSTED

DEADLINE

Spoiler Assembly Component SupplyThis subcontract, titled Spoiler Assembly Component Supply, is issued by Navsup Weapon Systems Support under the Department of Defense. The agreement focuses on the procurement of aerospace-grade replacement parts, fasteners, and sub-components necessary for the repair of NSN 1680-01-650-9016. The supplier is responsible for sourcing OEM or approved equivalent parts that match Reference Number 81205 113A4600-406 to support prime contractors on Department of the Navy aerospace repair projects. To ensure regulatory and origin compliance, the provider must furnish Buy American and Trade Agreements certifications. The contract falls under NAICS code 336413, with a posting date of October 20, 2026, and a response deadline of November 19, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Spoiler Assembly Teardown and RepairThis subcontract, managed by Navsup Weapon Systems Support for the Department of Defense, involves the teardown, evaluation, and repair of NRP Spoiler Assemblies (NSN 1680-01-650-9016) for Department of the Navy aerospace projects. The selected contractor will be responsible for disassembling the units, conducting technical evaluations for wear and damage, and performing necessary repairs or modifications in strict accordance with OEM or military specifications. The work requires the use of precision measuring instruments and aerospace-grade tooling to ensure the delivery of certified, serviceable assemblies. Additionally, the contractor must possess CAV RP reporting capabilities to meet the administrative requirements of the project. The solicitation was posted on October 20, 2026, with a response deadline of November 19, 2026, under NAICS code 336413.

Navsup Weapon Systems Support

POSTED

DEADLINE

Aircraft Skin Component Supplier (NSN 1560-01-723-6222)This subcontract involves the supply of aircraft skin components for prime contractors supporting US Navy NAVSUP Weapon Systems Support projects. The selected supplier is responsible for manufacturing or sourcing parts that strictly adhere to NSN 1RD 1560-01-723-6222 QF specifications. All deliverables must be packaged according to MIL-STD-2073 and marked in accordance with MIL-STD-129, with final delivery directed to shipping point W25G1U. To ensure quality and precision, the contractor must maintain ISO 9001 or SAE AS9100 certification. Additionally, all equipment used in the process must be calibrated to NCSL Z540.3 or ISO 10012 standards. This opportunity falls under NAICS code 336413 and requires responses to be submitted by November 19, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Supply of Attitude Indicators (NSN 6610-01-432-3229)This subcontract, issued by the Department of Defense through the Pa DLA Aviation At Philadelphia, involves the supply of Attitude Indicators under NSN 6610-01-432-3229 for NAVAIR aviation component projects. The selected provider is responsible for manufacturing or procuring units that strictly adhere to TDP Version 003, ensuring that all hardware, software, and firmware are fully aligned with the established equipment baseline. The contractor must ensure all units are marked according to MIL-STD-130 and packaged in compliance with MIL-STD-2073. To qualify, the provider must maintain ISO 9001 certification and demonstrate compliance with DFARS 252.204-7012. The final deliverable consists of the physical indicator units, fully marked and packaged for delivery.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Fuel Relief Valve Teardown and RepairThis subcontract with Navsup Weapon Systems Support involves the teardown, evaluation, repair, and modification of Fuel Relief Valves under NSN 7RH 2915-01-201-6004 EK. The scope of work includes conducting wear analysis, implementing approved repair procedures, and performing necessary environmental and quality conformance testing to deliver a fully certified, repaired valve for US Navy aviation projects. The contractor must maintain ISO 9001 or SAE AS9100 certification and utilize measuring and test equipment calibrated to NCSL Z540.3 or ISO 10012 standards. This opportunity falls under NAICS code 336413, with a response deadline set for November 19, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Aviation Component Parts SupplierThis subcontract, managed by Navsup Weapon Systems Support under the Department of Defense, involves the supply of replacement parts, seals, and hardware for Air Pressure Regulators, specifically part number 166001039791. These components are intended for prime contractors working on Department of the Navy aviation projects. The supplier is required to provide OEM or approved equivalent aviation-grade seals and valves, ensuring all materials meet strict quality and origin standards. Key deliverables include the physical parts along with necessary quality certifications in compliance with Trade Agreements and hazardous materials modal regulations. The opportunity was posted on October 20, 2026, with a response deadline of November 20, 2026. The contract falls under NAICS code 336413, focusing on the specialized procurement of aviation component parts.

Navsup Weapon Systems Support

POSTED

about 14 hours ago

DEADLINE

in about 1 month

General Info

Agency

Department Of Defense → FA8119 Afsc Pzabc

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment Manufacturing

Place of Performance

OK, USA

Set-Aside

NONE

Documents

Attachment+I.xlsx

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

5 updates

PhaseClosed

PostedMay 7

Presolicitation

Type ChangedDec 8

Presolicitation → Solicitation

Deadline changedMay 19

Response deadline changed from Jan 25, 2021 to May 28, 2021.

Deadline changedMay 28

Response deadline changed from May 28, 2021 to Aug 2, 2021.

Notice updatedJun 14

The notice description changed. The point of contact changed.

Deadline changedAug 3

Response deadline changed from Aug 2, 2021 to Sep 3, 2021.

Deadline changedSep 3

Response deadline changed from Sep 3, 2021 to Sep 10, 2021.

Response DeadlineSep 10

Deadline has passed

Submission Closed

09/10/2021, 06:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → FA8119 Afsc Pzabc

Contacts1 person available

OfficeTINKER AFB, OK, 73145-3015, USA

Organization / AgencyDepartment Of Defense → FA8119 Afsc Pzabc

Office AddressTINKER AFB, OK, 73145-3015, USA

Contacts

Roxanne Yorganson

contact@example.gov

Full Description

THIS IS A SOLE SOURCE EFFORT INTENDED FOR THE RAYTHEON COMPANY (CAGE Code: 4U884) ONLY. This acquisition is for the follow-on contract to the Original Equipment Manufacturer (OEM) for highly specialized repair and engineering services to include, repair, functional testing, disassembly & re-assembly, inspection, maintenance, overhaul, and engineering sustainment support services. Finishing actions are required to return the end item to a specified serviceable condition. Project Title: B-2 Advanced High Frequency Radar Units and End Items In Accordance with FAR 5.207(c): (1) National Stock Number (NSN): This service acquisition is for the repair of multiple NSNs: 5895-01-577-7664, 6130-01-577-3453, 5998-01-581-0562, 5998-01-581-0537, 5998-01-581-0566, 5998-01-581-0570, 6610-01-581-2662,5998-01-581-0481, 5998-01-581-0512, 5998-01-581-0533, 5998-01-581-0567, 5998-01-581-0572, 5841-01-577-5559, 5841-01-421-0909, 5841-01-428-4489, 6610-01-357-1940, 5826-01-368-1538, 5821-01-687-1120, 5820-01-431-3579, 5820-01-431-3579 (new), 5985-01-368-8340, 5985-01-669-3796, 5831-01-447-1276, 5826-01-384-2173, 5862-01-652-1426, 6110-01-317-2372, 5895-01-261-9959, 5895-01-261-9960. (2) NSNs are subject to the RQR-848 approved listing on 19 June 2017 (valid through 19 June 2024). This listing and qualification procedures can be found at https://www.tinker.af.mil/Home/429SCMS-SASPO/ (3) Manufacturer, including part number, drawing number, etc.: See Attachment I. (4) Size, dimensions, or other form, fit or functional description: See Attachment I. (5) Predominant material of manufacture: See Attachment I. (6) Quantity: See Attachment I. (7) Unit of issue: EA (8) Destination information. TBD (9) Delivery schedule. TBD (10) Duration of the contract period. Estimated 10 years (11) Sustainable acquisition requirements: n/a (12) For a proposed contract action in an amount estimated to be greater than $25,000 but not greater than the simplified acquisition threshold: n/a (13) For Architect-Engineer projects and other projects for which the product or service codes are insufficient: n/a (14) n/a (15) THIS IS A SOLE SOURCE EFFORT INTENDED FOR THE RAYTHEON COMPANY (CAGE Code: 4U884) ONLY. Raytheon Company owns the data required to repair these NSNs and is currently the only qualified source. IAW FAR 6.305(a) a redacted Justification & Approval (J&A) as required by FAR 6.303-1 will be posted within 14 days after contract award. (16) All responsible sources may submit a capability statement, proposal, or quotation, which shall be considered by the agency. (17) A copy of the solicitation may be requested from the Contracting Office listed below. (18) n/a (19) n/a Additional Description: This acquisition is for the follow-on contract to the Original Equipment Manufacturer (OEM) for highly specialized repair and engineering services to include, repair, functional testing, disassembly & re-assembly, inspection, maintenance, overhaul, and engineering sustainment support services. Finishing actions are required to return the end item to a specified serviceable condition. History: FA8119-16-D-0016; FA8119-17-D-0015; FA8119-20-F-0005; FA8119-17-D-0002 UID Note to Contractor: If unit price exceeds $5,000, then UID requirements will apply Written procedures used for this solicitation: No telephone requests. Only written requests received directly from the requestor are acceptable. All responsible sources solicited may submit a bid, proposal, or quotation, which shall be considered. Note: An Ombudsman has been appointed to hear concerns from offerors or potential offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. If there is an issue, parties are invited to contact the AFSC/PZC Ombudsman at 405-736-3273.