Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

B-52 Nose Dome Fairing Fabrication

Active

Federal

Response Deadline11/30/2026, 10:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This small business set-aside subcontract involves the fabrication of 109 left-hand and right-hand B-52 nose dome fairings for prime contractors supporting DLA Aviation at Oklahoma City. The scope of work includes precision molding or machining for specific national stock numbers, the application of aerospace-grade coatings, and the implementation of Unique Identification marking. To qualify for this project, the contractor must maintain AS9100 certification and ensure strict compliance with Export Control regulations. The opportunity was posted on October 20, 2026, with a response deadline of November 30, 2026, falling under NAICS code 336413.

General Info

Fabricate 109 B-52 nose dome fairings for DLA Aviation requiring AS9100 certification.

Agency

Department Of Defense → Ok DLA Aviation At Oklahoma City

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment Manufacturing

Place of Performance

OK, USA

Set-Aside

SBA

Documents

This scope was carved out of SPRTA1-26-R-0410.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Fairing, Aircraft (Nose Dome)

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 20

subcontract

Response DeadlineNov 30

Submission deadline

Response Deadline

11/30/2026, 10:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Ok DLA Aviation At Oklahoma City

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Ok DLA Aviation At Oklahoma City

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Fabricates aircraft nose dome fairings for prime contractors on DLA Aviation projects. Performs precision molding or machining of fairings (NSNs 1560-00-735-3588 and 1560-00-735-3589), applies aerospace-grade coatings, and implements Unique Identification (UID) marking. Requires AS9100 certification and compliance with Export Control regulations. Delivers 109 completed Left-Hand and Right-Hand Nose Dome Fairings.

Similar Contracts

Same NAICS industry code

Supply of Spacer, Sleeve (NSN 5365-01-034-2519)This subcontract, set aside for total small businesses under NAICS code 336413, involves the manufacture and delivery of 124,000 sleeve spacers, identified as NSN 5365-01-034-2519, for the Defense Logistics Agency Weapons Support ASC. The selected provider will supply these units to DLA Depots, ensuring all items are produced and delivered according to strict military and industry standards. Technical requirements include sampling per MIL-STD-1916 or ASQ H1331, packaging according to ASTM D3951 and RP001, and marking and labeling in compliance with MIL-STD-129. Additionally, the contractor must maintain CMMC Level 1 certification and adhere to all ITAR and EAR export control regulations to ensure the security and legality of the supply chain.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 20 hours ago

DEADLINE

105mm Illuminating Artillery Shell ManufacturingThis subcontract involves the manufacture and supply of 105mm illuminating artillery shells to support prime contractors fulfilling UK Ministry of Defence munitions contracts. The scope of work encompasses the precision machining of shell bodies, the integration of illumination payloads, and rigorous quality assurance testing to ensure all deliverables meet strict MOD technical criteria. Managed by Defence Equipment and Support, the contract requires the provider to maintain specialized munitions manufacturing facilities and strictly adhere to the Defence and security special regime. Interested parties must submit responses by February 26, 2027, to provide the finished artillery shells under NAICS code 336413.

Defence Equipment and Support

POSTED

about 20 hours ago

DEADLINE

Antenna-430 ADF Repair and Overhaul ServicesThis subcontract involves providing repair and overhaul services for the Antenna-430 ADF, A1, supporting prime contractors on projects for the Department of Defense Navsup Weapon Systems Support. The scope of work includes the complete teardown, evaluation, and modification of units, where defective components are identified and replaced based on approved repair manual limits. All work must be performed using specialized avionics testing equipment and must strictly adhere to IPC/EIAJ-STD-001C soldering standards to ensure units are delivered in Ready for Issue condition. The opportunity is categorized under NAICS code 336413 and was posted on October 20, 2026, with a response deadline of November 19, 2026. This technical engagement focuses on maintaining critical aviation components to meet rigorous military specifications and operational readiness requirements.

Navsup Weapon Systems Support

POSTED

DEADLINE

Aircraft Wheel Component SupplyThis subcontract, titled Aircraft Wheel Component Supply, involves providing replacement components, seals, and hardware to prime contractors supporting NAVSUP Weapon Systems Support aircraft wheel overhaul projects. The scope specifically focuses on delivering certified aircraft-grade replacement parts and aviation-grade alloys that meet approved repair manual specifications for NSN 1630-14-597-7780. Managed under the Department of Defense, the contract requires strict adherence to the Buy American Act and Trade Agreements certifications. Additionally, the supplier is responsible for providing Material Safety Data Sheets for any hazardous materials delivered. The solicitation was posted on October 20, 2026, with a response deadline of November 19, 2026, falling under NAICS code 336413.

Navsup Weapon Systems Support

POSTED

DEADLINE

Aircraft Wheel Half Repair and Overhaul ServicesThis subcontract for Aircraft Wheel Half Repair and Overhaul Services supports NAVSUP Weapon Systems Support projects within the Department of Defense. The scope of work involves the comprehensive teardown, evaluation, repair, and overhaul of aircraft wheel halves under NSN 1630-14-597-7780. The selected provider will be responsible for disassembling units, cleaning and inspecting parts according to approved manuals, replacing defective components, and reassembling the units using specialized fixtures, jigs, and test equipment. All deliverables must be provided in Ready for Issue condition and must strictly comply with MIL-STD-130 and MIL-STD-129 standards. This opportunity falls under NAICS code 336413, with a response deadline set for November 19, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Flight Model Solar Array Wings SupplyThis subcontract involves the supply of flight-ready, qualified solar panel sets for prime contractors working on NASA/NSSC TERP RAPTOR 12U CubeSat projects. The selected provider is responsible for manufacturing solar array wings that adhere to strict space-flight specifications, utilizing space-grade solar cells, flight-qualified substrates, and deployment mechanisms specifically designed for the 12U CubeSat standard. All deliverables must meet the rigorous acceptance and verification standards established by the NASA Goddard Space Flight Center. The final requirement is the delivery of a complete set of flight-ready solar array wings, with performance taking place in Greenbelt, Maryland.

National Aeronautics And Space Administration

POSTED

DEADLINE

Component Evaluation and InspectionThis subcontract, titled Component Evaluation and Inspection, is issued by the Navsup Weapon Systems Support under the Department of Defense. The project involves performing technical evaluations and inspections of spoiler assemblies for prime contractors working on Department of the Navy aerospace projects. The primary objective is to identify structural cracks, corrosion, or fatigue through the application of Non-Destructive Testing methods, specifically X-ray, Ultrasonic, and Dye Penetrant techniques. Qualified providers must hold ASNT or equivalent aerospace inspection certifications to ensure technical compliance. The final deliverable for this engagement is a detailed evaluation report that includes specific recommended repair actions. The solicitation was posted on October 20, 2026, with a response deadline of November 19, 2026, and falls under NAICS code 336413.

Navsup Weapon Systems Support

POSTED

DEADLINE

Spoiler Assembly Component SupplyThis subcontract, titled Spoiler Assembly Component Supply, is issued by Navsup Weapon Systems Support under the Department of Defense. The agreement focuses on the procurement of aerospace-grade replacement parts, fasteners, and sub-components necessary for the repair of NSN 1680-01-650-9016. The supplier is responsible for sourcing OEM or approved equivalent parts that match Reference Number 81205 113A4600-406 to support prime contractors on Department of the Navy aerospace repair projects. To ensure regulatory and origin compliance, the provider must furnish Buy American and Trade Agreements certifications. The contract falls under NAICS code 336413, with a posting date of October 20, 2026, and a response deadline of November 19, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Spoiler Assembly Teardown and RepairThis subcontract, managed by Navsup Weapon Systems Support for the Department of Defense, involves the teardown, evaluation, and repair of NRP Spoiler Assemblies (NSN 1680-01-650-9016) for Department of the Navy aerospace projects. The selected contractor will be responsible for disassembling the units, conducting technical evaluations for wear and damage, and performing necessary repairs or modifications in strict accordance with OEM or military specifications. The work requires the use of precision measuring instruments and aerospace-grade tooling to ensure the delivery of certified, serviceable assemblies. Additionally, the contractor must possess CAV RP reporting capabilities to meet the administrative requirements of the project. The solicitation was posted on October 20, 2026, with a response deadline of November 19, 2026, under NAICS code 336413.

Navsup Weapon Systems Support

POSTED

DEADLINE

Aircraft Skin Component Supplier (NSN 1560-01-723-6222)This subcontract involves the supply of aircraft skin components for prime contractors supporting US Navy NAVSUP Weapon Systems Support projects. The selected supplier is responsible for manufacturing or sourcing parts that strictly adhere to NSN 1RD 1560-01-723-6222 QF specifications. All deliverables must be packaged according to MIL-STD-2073 and marked in accordance with MIL-STD-129, with final delivery directed to shipping point W25G1U. To ensure quality and precision, the contractor must maintain ISO 9001 or SAE AS9100 certification. Additionally, all equipment used in the process must be calibrated to NCSL Z540.3 or ISO 10012 standards. This opportunity falls under NAICS code 336413 and requires responses to be submitted by November 19, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Supply of Attitude Indicators (NSN 6610-01-432-3229)This subcontract, issued by the Department of Defense through the Pa DLA Aviation At Philadelphia, involves the supply of Attitude Indicators under NSN 6610-01-432-3229 for NAVAIR aviation component projects. The selected provider is responsible for manufacturing or procuring units that strictly adhere to TDP Version 003, ensuring that all hardware, software, and firmware are fully aligned with the established equipment baseline. The contractor must ensure all units are marked according to MIL-STD-130 and packaged in compliance with MIL-STD-2073. To qualify, the provider must maintain ISO 9001 certification and demonstrate compliance with DFARS 252.204-7012. The final deliverable consists of the physical indicator units, fully marked and packaged for delivery.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Fuel Relief Valve Teardown and RepairThis subcontract with Navsup Weapon Systems Support involves the teardown, evaluation, repair, and modification of Fuel Relief Valves under NSN 7RH 2915-01-201-6004 EK. The scope of work includes conducting wear analysis, implementing approved repair procedures, and performing necessary environmental and quality conformance testing to deliver a fully certified, repaired valve for US Navy aviation projects. The contractor must maintain ISO 9001 or SAE AS9100 certification and utilize measuring and test equipment calibrated to NCSL Z540.3 or ISO 10012 standards. This opportunity falls under NAICS code 336413, with a response deadline set for November 19, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

More opportunities from Department Of Defense → Ok DLA Aviation At Oklahoma City

Same awarding agency

Non-Destructive Testing (NDT) and Quality ValidationThis subcontract for Non-Destructive Testing (NDT) and Quality Validation supports prime contractors on DLA Aviation F-118 engine projects for the Department of Defense. The scope of work involves performing specialized testing and inspections, including pressure testing, leak testing, and dimensional inspection. These tasks are executed using advanced equipment such as CMM, X-ray, and ultrasonic tools to ensure rigorous quality standards. To qualify for this engagement, providers must hold NADCAP and AS9100 certifications. The primary deliverables include certified test reports and Inspection Method Sheets. This opportunity is categorized under NAICS code 541380 and is managed by DLA Aviation in Oklahoma City.

Testing Laboratories and Services

POSTED

DEADLINE

Aerospace Raw Material Supply (Specialty Alloys)This subcontract, titled Aerospace Raw Material Supply (Specialty Alloys), involves the procurement and delivery of certified raw materials for prime contractors working on DLA Aviation F-118 engine projects. The scope of work includes providing aerospace-grade alloy bars, forgings, or castings, all of which must be delivered to the manufacturer with full traceability and accompanying Material Test Reports. To ensure quality and compliance, the Department of Defense requires the supplier to maintain ISO 9001 certification and provide all necessary material certifications. This opportunity is managed by DLA Aviation in Oklahoma City under NAICS code 331210, with a response deadline set for October 30, 2026.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

DEADLINE

Specialized Aerospace Finishing and Surface TreatmentThis subcontract for Specialized Aerospace Finishing and Surface Treatment involves performing Significant Industrial Processes for prime contractors supporting DLA Aviation F-118 engine projects. The scope of work requires the application of aerospace-grade heat treating, plating, anodizing, or chemical coatings to valve assembly parts utilizing industrial plating baths and heat-treatment furnaces to deliver fully treated components. Managed by the Department of Defense through DLA Aviation at Oklahoma City, the contract falls under NAICS code 332813. Qualified providers must hold SIP Certification, ISO 9001, or AS9100 certifications to ensure compliance with aerospace standards. The solicitation was posted on October 20, 2026, with a response deadline of October 30, 2026.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

Precision Machining for F-118 Valve Assembly ComponentsThis subcontract involves high-precision machining for F-118 engine valve assembly components supporting DLA Aviation. The scope of work requires the execution of CNC milling, turning, and grinding using aerospace-grade alloys to meet strict tolerances defined by technical data and Process Operation Sheets. To qualify, contractors must hold ISO 9001, AS9100, or NATO AQAP-2070 certifications. The project is managed under the Department of Defense via DLA Aviation at Oklahoma City, with a response deadline of October 30, 2026.

POSTED

DEADLINE

Precision Component Supply (Micro-circuits and Connectors)This subcontract, titled Precision Component Supply (Micro-circuits and Connectors), involves the procurement of aviation-grade micro-circuits, batteries, and connectors to support prime contractors on USAF aircraft projects. Managed by the Department of Defense through the DLA Aviation office in Oklahoma City, the contract requires the supplier to source materials and provide necessary certifications to ensure strict compliance with MIL-PRF-32144 standards. The selected provider must maintain aerospace quality certifications and adhere to ITAR and EAR regulations for the handling of controlled components. The scope of work includes the delivery of bulk components and materials to the manufacturer, with performance taking place in Collegeville. The solicitation was posted on October 20, 2026, with a response deadline of October 30, 2026.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

First Article Testing (FAT) and Design VerificationThis subcontract involves providing engineering and design verification services for prime contractors working on USAF aircraft projects. The scope of work focuses on developing formal test plans and executing tests utilizing precision timing equipment and environmental chambers. These activities are designed to produce objective evidence of compliance with MIL-PRF-32144 and DID_DI_NDTI_80809B standards, with the final deliverables being an approved Test Plan and a Final Test Report. Managed under the Department of Defense through the Ok DLA Aviation At Oklahoma City, the project requires coordination of witness verifications with 422 SCMS/GUEA. The performance of these services will take place in Collegeville. Interested parties should note the response deadline of October 30, 2026, for this opportunity categorized under NAICS code 541330.

Engineering Services

POSTED

DEADLINE

Clock Panel Fabrication and AssemblyThis subcontract involves the manufacture and assembly of Clock Panel units for prime contractors supporting USAF aircraft projects. The scope of work includes the fabrication of anodized aluminum cases and the integration of glass, batteries, wiring, connectors, and micro-circuits in accordance with MIL-PRF-32144. Additionally, the contractor is responsible for applying Unique Item Identifiers as mandated by MIL-STD-130. The project requires the delivery of 185 production units and 3 First Article units. To be eligible, the contractor must maintain ITAR/EAR registration and ensure full compliance with NIST SP 800-171 standards. The work is associated with NAICS code 334517 and is managed under the Department of Defense through the DLA Aviation office in Oklahoma City, with performance taking place in Collegeville.

Irradiation Apparatus Manufacturing

POSTED

DEADLINE

PWB Inspection and Certification TestingThe PWB Inspection and Certification Testing subcontract involves providing independent inspection and testing services for prime contractors on Department of the Air Force projects. The primary objective is to ensure that printed wiring boards meet strict flight safety and performance specifications through functional testing and quality inspections. These activities are conducted against the Engineering Data List using precision electronic testing equipment to maintain compliance with KC-46 platform Qualification Requirements. Managed by the Department of Defense through the Ok DLA Aviation At Oklahoma City, the contract requires the delivery of certified test reports and inspection stamps. The opportunity is categorized under NAICS code 541380, with a response deadline set for November 20, 2026.

Testing Laboratories and Services

POSTED

DEADLINE

Aviation-Grade Electronic Component SupplyThis subcontract, managed by the Department of Defense through the Ok DLA Aviation At Oklahoma City, focuses on the procurement and supply of raw materials and specialized electronic components. The primary objective is to support prime contractors on Department of the Air Force projects specifically for the manufacture of PWB 285T0458-203. The scope of work includes sourcing long-lead time components and actively managing Diminishing Manufacturing Sources and Material Shortages to ensure production continuity. To maintain strict quality standards, the provider must supply certificates of conformance for all aviation-grade materials and is responsible for delivering completed component kits directly to the fabricator. This effort falls under NAICS code 423610, with a response deadline set for November 20, 2026.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

Printed Wiring Board Fabrication and AssemblyThis subcontract involves the fabrication and assembly of three Printed Wiring Boards, specifically part number 285T0458-203, for Department of the Air Force projects managed by the Ok DLA Aviation At Oklahoma City. The selected contractor is responsible for the new manufacture, procurement, and integration of all component parts in strict accordance with the Engineering Data List. To ensure quality and compliance, the contractor must adhere to MQR-PSD-1 standards and possess the capability to support a Source Approval Request package. The project is categorized under NAICS code 334418, with a response deadline set for November 20, 2026.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

Aerospace-Grade Raw Material SupplyThis subcontract opportunity, managed by the Department of Defense through DLA Aviation in Oklahoma City, involves the procurement of certified aerospace-grade raw materials. The selected provider will be responsible for sourcing and delivering specialty alloys, resins, or composites that strictly adhere to military specifications for the production of B-52 nose dome fairings. A critical requirement of the contract is the provision of full material traceability and comprehensive mill certifications for all delivered goods. The opportunity is designated as a total Small Business Set Aside under NAICS code 326199. Interested parties must submit their responses by November 30, 2026. The scope of work focuses on ensuring that high-quality raw materials are delivered directly to the manufacturer to support prime contractors on critical aviation projects.

All Other Plastics Product Manufacturing

POSTED

DEADLINE

in about 1 month

Fairing Test Plan Execution and CertificationThe Fairing Test Plan Execution and Certification is a small business set-aside subcontract through the Department of Defense for DLA Aviation at Oklahoma City. The selected contractor will be responsible for performing mandatory testing and certification for prime contractors, which includes developing and executing approved test plans, verifying material properties, and conducting structural or environmental testing. To qualify for this engagement, the contractor must hold NADCAP or ISO/IEC 17025 accreditation. Key deliverables for the project include the submission of formal test reports and Certifications of Compliance for both the processes and the materials. The solicitation was posted on October 20, 2026, with a response deadline of November 30, 2026.

Testing Laboratories and Services

POSTED

DEADLINE

in about 1 month

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS